Search

Purpose: The goal of this study was to assess the peri-implant condition, peri-implant bone loss (PBL), and complication rates of short dental implant-supported splinted crowns (SDI-SCs) and non-splinted crowns (SDI-NSCs) in the maxillary premolar-molar region. Materials and Methods: Patients who had short implants placed near their maxillary sinuses were evaluated. Both patient satisfaction and presence of any technical complication, e.g. porcelain wear and chipping, loss of retention and loosening of the abutment, fixture or screw, were noted. The peri-implant plaque index (PIPI), probing depth (PIPD), bleeding on probing (PIBP), and peri-implant bone loss (PBL) were evaluated. To assess the impact of prosthesis type and SDI placement on technical problems, a log-rank test was computed. p < 0.05 was considered statistically significant. Results: A total of 72 patients agreed to be followed-up, showing a mean follow-up time of 3.1 years. Ninty-five implants in total (55 SDI-SCs, and 40 SDI-NSCs) with moderately rough surfaces were evaluated. The average PBL score for implant and patients was 1.27 (0.02-3.97) and 1.25 (0.03-4.41), respectively. More technical complications were observed with single crowns than with splinted crowns. There were no statistically significant differences in the peri-implant parameters between SDI-SCs and SDI-NSCs (p > 0.05). PBL at molar sites was substantially higher than at premolar sites (p = 0.048). Sixty patients (83.3%) were satisfied with the appearance of the crowns, while 57 patients (79.1%) were satisfied with the crowns' performance. Conclusion: The peri-implant conditions, bone levels, technical complication rates and patient satisfaction were comparable between the SDI-SCs and SDI-NSCs. However, implants placed in the molar sites had statistically significantly greater bone loss in comparison to those at the premolar sites. [ABSTRACT FROM AUTHOR]

Osteoporosis is a disease in which bone mass and structural strength decrease, leading to increased fragility and susceptibility to fractures in the face, neck, spine, wrist, etc. It's a disease that doesn't display any symptoms until a break occurs; in other words, it's a silent illness. Sometime it also utilised frequently in dentistry application such that to detect osteoporosis during the operation or implanting on maxilla. This body of work shows that, despite major breakthroughs in medicine, there remains a unique role for the development of novel tools for the diagnosis of osteoporosis. In this work, we present an osteoporosis detection system developed using image processing and support vector machine (SVM) techniques. Compared to prior studies in this area, the data collected by the technology established in this study—which includes 50 sample photographs of the tibia—is of high quality. The proposed method achieves an impressively high level of accuracy (83.6% with 50 samples) because to the inclusion of the histogram feature and the use of tissue properties during feature extraction. [ABSTRACT FROM AUTHOR]

Aim: The aim of the study was to investigate whether the surface geometry or topography of implant abutments affects the retentive strength of prosthesis cemented with zinc phosphate on standard machined, sandblasted, and grooved implant abutments and to compare the results between them. Materials and Methods: Fifteen similarly shaped implant abutments (MDcpk61; MIS Implant Technologies Ltd.,) (height 6.0 mm and 6-degree taper) were divided into three groups (n = 05): Group I - standard machined abutments without grooves, Group II - sandblasted abutments (same as Group I but sandblasted with 50 μ aluminum oxide), and Group III - abutment with prefabricated circumferential grooves. Further in these groups of 15 abutments, 5 abutments each are to be taken to check the retentive force of zinc phosphate cement. Fifteen identical cast copings was prepared to fit all 15 abutments. The castings will be cemented to each group of abutments with an above-mentioned luting agent. After thermal cycling and storage for 6 days in a water bath, a retention test is to be done with a tensile testing machine (Instron) (5 mm/min) and retentive forces will be recorded. Data will be subjected to one-way ANOVA test and Student's t-test. Results: For zinc phosphate cement, F = 30.53 (>3.59 for P = 0.05) shows a statistically significant difference between all the three groups. Conclusion: Circumferential grooves on implant abutments give better retention when compared with standard machined (plain) and sandblasted abutments despite marked difference. Clinical Significance: Retention of restoration depends on the surface of the abutment as well as the luting agents used. Incorporation of retentive grooves can enhance retention of prosthesis, especially in situation of short abutments. [ABSTRACT FROM AUTHOR]