Search

The efficacy of nanomedicines is dependent on their access to target sites in the body, and this in turn is affected by their size, shape and transport properties in tissue. Although there have been many studies, the ability to design nanomaterials with optimal physicochemical properties for in vivo efficacy remains a significant challenge. In particular, it is difficult to quantify the detailed effects of cancer drug delivery systems in vivo as tumour volume reduction, a commonly reported marker of efficacy, does not always correlate with cytotoxicity in tumour tissue. Here, we studied the behaviour in vivo of two specific poly(2-hydroxypropyl methacrylamide) (pHPMA) pro-drugs, with the same chemical compositions of redox-responsive backbone components and pH-sensitive linkers to the anti-cancer drug doxorubicin but with varying architectures, in this case hyperbranched and star-shaped. Evaluation of the biodistribution of these polymers following systemic injection indicated differences in the circulation time and organ distribution of the two polymers, despite their very similar hydrodynamic radii (~ 10 and 15 nm) and underlying chemistry of backbone, side-chain and pro-drug linkers. In addition, both polymers showed improved tumour accumulation in orthotopic triple-negative breast cancers in mice, and decreased accumulation in healthy tissue, as compared to free doxorubicin. Importantly, there was a significant increase in tumour accumulation for the hyper-branched polymer compared to the star polymer, suggesting a possible role for solution conformations of these materials, rather than the chemistries, in mediating their performance. The results of haematoxylin and eosin assays, and TUNEL staining indicated a higher population of apoptotic cells in the tumours for both polymer pro-drug treatments, and in turn a lower population of apoptotic cells in the heart, liver and spleen, as compared to free doxorubicin. In particular, the hyperbranched polymer demonstrated significantly higher tumour deposition and apoptosis levels than its star shaped counterpart. Taken together, these data suggest that the penetration of both of these polymer pro-drugs was enhanced in tumour tissue relative to free doxorubicin, and that the combination of size, architecture, bioresponsive backbone and drug linker degradation yielded greater efficacy for the polymers as measured by biomarkers other than that of tumour volume.

Hyperbranched polyHPMA materials penetrate deep into pancreatic cancer spheroids and a hyperbranched polymer-gemcitabine conjugate showed potency in vitro and in vivo.

Correction for ‘Elucidating the role of multivalency, shape, size and functional group density on antibacterial activity of diversified supramolecular nanostructures enabled by templated assembly’ by Amrita Sikder et al., Mater. Horiz., 2023, 10, 171–178, https://doi.org/10.1039/D2MH01117D.

With the increased prevalence of antibiotic-resistant infections, there is an urgent need to develop novel antibacterial materials. In addition, gaining a complete understanding of the structural features that impart activity toward target microorganisms is essential to enable materials optimisation. Here we have reported a rational design to fabricate antibacterial supramolecular nanoparticles with variable shape, size and cationic group density, by exploiting noncovalent interactions between a shape determining template amphiphile and a cationic amphiphile to introduce charge on the nanoparticle surface. We have shown that the monomeric cationic amphiphile alone showed poor antibacterial activity, whereas nanostructures formed by co-assembling the complementary units showed significantly enhanced antibacterial efficiency. Further, the systematic variation of several structural parameters such as shape, spacing between the cationic groups and size of these nanostructures allowed us to elicit the role of each parameter on the overall antibacterial properties. Finally, we investigated the origin of the differing antibacterial activity of these nanoparticles having different shape and size but with the same molecular composition, by comparing the thermodynamic parameters of their binding interactions with a bacterial membrane mimic.

Herein, a library of trifluoroethyl substituted aminomaleimide derivatives are reported with small size and enhanced emissions in both solution and solid-state. A diCH2CF3 substituted aminochloromaleimide exhibits the most efficient dual-state emission (Φf >50 % in solution and solid-state), with reduced quenching from protic solvents. This is attributed to the reduction of electron density on the maleimide ring and suppressed π-π stacking in the solid-state. This mechanism was explored in-depth by crystallographic analysis, and modelling of the electronic distribution of HOMO-LUMO isosurfaces and NCI plots. Hence, these dual-state dyes overcome the limitations of single-state luminescence and will serve as an important step forward for this rapidly developing nascent field. The authors thank the Ministerio de Economia y Competitividad (MINECO) of Spain (project: PID2019-104772GB-I00) and the Basque Government (project IT1346-19), and the Leverhulme Trust (RPG-2016-452). Dr. Thomas R. Wilks and Dr. Yujie Xie are thanked for helpful discussions and Chi Tsang (University of Birmingham) for high resolution mass spectroscopy analysis. The authors acknowledge the computational resources, and technical and human support provided by the DIPC.

Over the past few decades, advanced polymeric materials have gained popularity in the development of sustainable agricultural applications. Smart polymeric systems have extensively contributed to the agricultural industry by increasing the efficiency of pesticides, herbicides, and fertilizers by facilitating controlled release systems and, therefore, enabling lower doses to be used. Superabsorbent polymeric materials have been used as soil conditioners to control the impact of drought, whereas polycationic polymers have been utilized for plant bioengineering. These functions in the environment are complemented by applications within plants as part of the developing range of tools for genetically transforming plants in order to increase productivity and disease resistance. This Review will summarize and discuss the recent developments in the design and application of advanced polymeric systems for precision agriculture related applications. The design criteria of the polymers employed to date, such as polymer structure, as well as the properties of polymer nanoparticles including shape and size will be discussed, and the key findings in the related area will be highlighted. Finally, we will identify future directions for the exploration of functional polymers with the ultimate aim of advancing sustainable agriculture.\ud \ud

The thermoresponsive behaviour of cross-linked poly(N-isopropylacrylamide) (pNIPAm) nanogels makes these materials particularly attractive for a variety of applications. Literature data report the use of different methodologies for preparing nanogels, which can be divided into heterogeneous and homogeneous polymerisation approaches. Heterogeneous polymerisation occurs above the volume phase transition temperature (VPTT) of pNIPAm due to water expulsion from the network of the forming polymer. On the contrary, homogeneous polymerisation is conducted below the VPTT, so that the nanogel is in the swollen state during the polymerisation process. Here, we study the effect of phase separation during polymerisation, which reveals a significant influence on the particle size and internal structure, as well as on the thermoresponsive and interfacial behaviour of pNIPAm nanomaterials. We propose that heterogeneous polymerisation leads to preferential localisation of hydrophilic initiator residues on the particle surface, while during homogeneous polymerisation, the initiator groups are distributed within the nanogel network. These results highlight the importance of the choice of polymerisation temperature as well as initiator for the synthesis of pNIPAm gels, as this significantly affects their characteristics and application.

Shape and size play powerful roles in determining the properties of a material; controlling these aspects with precision is therefore an important, fundamental goal of the chemical sciences. In particular, the introduction of shape anisotropy at the nanoscale has emerged as a potent way to access new properties and functionality, enabling the exploration of complex nanomaterials across a range of applications. Recent advances in DNA and protein nanotechnology, inorganic crystallization techniques, and precision polymer self-assembly are now enabling unprecedented control over the synthesis of anisotropic nanoparticles with a variety of shapes, encompassing one-dimensional rods, dumbbells and wires, two-dimensional and three-dimensional platelets, rings, polyhedra, stars, and more. This has, in turn, enabled much progress to be made in our understanding of how anisotropy and particle dimensions can be tuned to produce materials with unique and optimized properties. In this Review, we bring these recent developments together to critically appraise the different methods for the bottom-up synthesis of anisotropic nanoparticles enabling exquisite control over morphology and dimensions. We highlight the unique properties of these materials in arenas as diverse as electron transport and biological processing, illustrating how they can be leveraged to produce devices and materials with otherwise inaccessible functionality. By making size and shape our focus, we aim to identify potential synergies between different disciplines and produce a road map for future research in this crucial area. The introduction of shape anisotropy at the nanoscale is a potent way to access new properties and functionalities. This Review appraises different methods for the bottom-up synthesis of anisotropic nanoparticles, and highlights the unique properties and applications of these materials with otherwise inaccessible functionality.

Functional ring-opening polymerization (ROP) initiators can instill a wide array of chemical, physical, and biological effects into a polymeric chain. Highlighting the versatility of this “active” initiator approach, a broad range of characteristics can be achieved through the use of initiators with chemistries spanning from drugs and dyes (key in the case of drug delivery or nanoparticle applications) through to radically active monomers, polymerization transfer agents, and catalysts. The selection of a suitable “active” initiator (monomers for tandem reactions, dyes, drugs, stereo-catalysts, etc.) can not only provide the final polymers with interesting application potential but also facilitate the implementation of ROP reactions in tandem with other polymerization techniques. Overall, this review will highlight that functionalities and properties can be effectively tuned by exploiting simple chemistry approaches, allowing readers to identify how these approaches could be of benefit to their own work in a range of applications including drug/gene delivery, amphiphilic bio/degradable carriers, drug/scent controlled release, and stereo-controlled polymers.In this review, the versatility of “active” initiators for ring-opening polymerization (ROP) strategy is summarized, reporting the use of initiators with various chemistries and intrinsic properties that range from drugs and dyes to radically active monomers, polymerization transfer agents, and catalysts. The selection of the most suitable initiators can not only produce the final polymers with interesting applications, but also provide the potential to perform ROP reactions in tandem with other polymerization techniques.

Triple negative or basal-like breast cancer (TNBC) is characterised by aggressive progression, lack of standard therapies and poorer overall survival rates for patients. The bad prognosis, high rate of relapse and resistance against anticancer drugs have been associated with a highly abnormal loss of redox control in TNBC cells. Here, we developed docetaxel (DTX)-loaded micellar-like nanoparticles (MLNPs), designed to address the aberrant TNBC biology through the placement of redox responsive cross-links designed into a terpolymer. The MLNPs were derived from poly(ethyleneglycol)-b-poly(lactide)-co-poly(N3-α-e-caprolactone) with a disulfide linker pendant from the caprolactone regions in order to cross-link adjacent chains. The terpolymer contained both polylactide and polycaprolactone to provide a balance of accessibility to reductive agents necessary to ensure stability in transit, but rapid micellar breakdown and concomitant drug release, when in breast cancer cells with increased levels of reducing agents. The empty MLNPs did not show any cytotoxicity in vitro in 2D monolayers of MDA-MB-231 (triple negative breast cancer), MCF7 (breast cancer) and MCF10A (normal breast epithelial cell line), whereas DTX-loaded reducible crosslinked MLNPs exhibited higher cytotoxicity against TNBC and breast cancer cells which present high intracellular levels of glutathione. Crosslinked and non-crosslinked MLNPs showed high and concentration-dependent cellular uptake in monolayers and tumour spheroids, including when assessed in co-cultures of TNBC cells and cancer-associated fibroblasts. DTX loaded crosslinked MLNPs showed the highest efficacy against 3D spheroids of TNBC, in addition the MLNPs also induced higher levels of apoptosis, as assessed by annexin V/PI assays and increased caspase 3/7 activity in MDA-MB-231 cells in comparison to cells treated with DTX-loaded un-crosslinked MLNP (used as a control) and free DTX. Taken together these data demonstrate that the terpolymer micellar-like nanoparticles with reducible crosslinks have high efficacy in both 2D and 3D in vitro cancer models by targeting the aberrant biology, i.e. loss of redox control of this type of tumour, thus may be promising and effective carrier systems for future clinical applications in TNBC.

Polymers that exhibit a lower critical solution temperature (LCST) have been of great interest for various biological applications such as drug or gene delivery, controlled release systems, and biosensing. Tuning the LCST behavior through control over polymer composition (e.g., upon copolymerization of monomers with different hydrophobicity) is a widely used method, as the phase transition is greatly affected by the hydrophilic/hydrophobic balance of the copolymers. However, the lack of a general method that relates copolymer hydrophobicity to their temperature response leads to exhaustive experiments when seeking to obtain polymers with desired properties. This is particularly challenging when the target copolymers are comprised of monomers that individually form nonresponsive homopolymers, that is, only when copolymerized do they display thermoresponsive behavior. In this study, we sought to develop a predictive relationship between polymer hydrophobicity and cloud point temperature (

Crystallization-driven self-assembly (CDSA) was employed for the preparation of monodisperse cationic cylindrical nanoparticles with controllable sizes, which were subsequently explored for their effect on antibacterial activity and the mechanical properties of nanocomposite hydrogels. Poly(ɛ-caprolactone)-block-poly(methyl methacrylate)-block-poly[2-(tert-butylamino) ethyl methacrylate] (PCL-b-PMMA-b-PTA) triblock copolymers were synthesized using combined ring-opening and RAFT polymerizations, and then self-assembled into polycationic cylindrical micelles with controllable lengths by epitaxial growth. The polycationic cylinders exhibited intrinsic cell-type-dependent antibacterial capabilities against gram-positive and gram-negative bacteria under physiological conditions, without quaternization or loading of any additional antibiotics. Furthermore, when the cylinders were combined into anionic alginate hydrogel networks, the mechanical response of the hydrogel composite was tunable and enhanced up to 51%, suggesting that cationic polymer fibers with controlled lengths are promising mimics of the fibrous structures in natural extracellular matrix to support scaffolds. Overall, this polymer fiber/hydrogel nanocomposite shows potential as an injectable antibacterial biomaterial, with possible application in implant materials as bacteriostatic agents or bactericides against various infections.\ud \ud

Poly(glycerol adipate) (PGA) is a biodegradable, biocompatible, polymer with a great deal of potential in the field of drug delivery. Active drug molecules can be conjugated to the polymer backbone or encapsulated in self-assembled nanoparticles for targeted and systemic delivery. Here, a range of techniques have been used to characterise the enzymatic degradation of PGA extensively for the first time and to provide an indication of the way the polymer will behave and release drug payloads in vivo. Dynamic Light Scattering was used to monitor change in nanoparticle size, indicative of degradation. The release of a fluorescent dye, coupled to PGA, upon incubation with enzymes was measured over a 96 h period as a model of drug release from polymer drug conjugates. The changes to the chemical structure and molecular weight of PGA following enzyme exposure were characterised using FTIR, NMR and GPC. These techniques provided evidence of the biodegradability of PGA, its susceptibility to degradation by a range of enzymes commonly found in the human body and the polymer’s potential as a drug delivery platform.

Entropy‐driven ROMP (ED‐ROMP) involves polymerization of olefin‐containing macrocyclic monomers under entropically favorable conditions. Macrocycles can be prepared from a variety of interesting molecules which, when polymerized, impart unique functionality to the resulting polymer backbone such as degradable linkages, biological moieties, crystallizable groups, or supramolecular hosts. In addition, the sequence of atoms in the cyclic monomer is preserved within the polymer repeating units, allowing for facile preparation of sequence‐defined polymers. In this review article, we consider how the mechanism of ROMP applies to ED polymerizations, how olefinic macrocycles are synthesized, and how polymerization conditions can be tuned to maximize conversion. Recent works in the past 10 years are highlighted, with emphasis on methods which can be employed to achieve fast polymerization kinetics and/or selective head‐to‐tail regiochemistry, thus improving polymerization control. ED‐ROMP, with its unique capability to produce polymers with well‐defined polymer backbone microstructure, represents an essential complement to other, well‐established, metathesis methodologies such as ROMP. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1621–1634

© 2020 Wiley-VCH GmbH The size, shape, and underlying chemistries of drug delivery particles are key parameters which govern their ultimate performance in vivo. Responsive particles are desirable for triggered drug delivery, achievable through architecture change and biodegradation to control in vivo fate. Here, polymeric materials are synthesized with linear, hyperbranched, star, and micellar-like architectures based on 2-hydroxypropyl methacrylamide (HPMA), and the effects of 3D architecture and redox-responsive biodegradation on biological transport are investigated. Variations in “stealth” behavior between the materials are quantified in vitro and in vivo, whereby reduction-responsive hyperbranched polymers most successfully avoid accumulation within the liver, and none of the materials target the spleen or lungs. Functionalization of selected architectures with doxorubicin (DOX) demonstrates enhanced efficacy over the free drug in 2D and 3D in vitro models, and enhanced efficacy in vivo in a highly aggressive orthotopic breast cancer model when dosed over schedules accounting for the biodistribution of the carriers. These data show it is possible to direct materials of the same chemistries into different cellular and physiological regions via modulation of their 3D architectures, and thus the work overall provides valuable new insight into how nanoparticle architecture and programmed degradation can be tailored to elicit specific biological responses for drug delivery.

Metal oxide microparticles with well-defined internal mesostructures are promising materials for a variety of different applications, but practical routes to such materials that allow the constitue...

The therapeutic potential of hyperbranched polymers targeted to prostate cancer and loaded with doxorubicin was investigated. Polyethylene glycol hyperbranched polymers were synthesised via RAFT polymerisation to feature glutamate urea targeting ligands for PSMA on the periphery. The chemotherapeutic, doxorubicin, was attached to the hyperbranched polymers through hydrazone formation, which allowed controlled release of the drug from the polymers in vitro endosomal conditions, with 90% release of the drug over 36 h. The polymers were able to target to PSMA-expressing prostate cancer cells in vitro, and demonstrated comparable cytotoxicity to free doxorubicin. The ability of the hyperbranched polymers to specifically facilitate transport of loaded doxorubicin into the cells was confirmed using live cell confocal imaging, which demonstrated that the drug was able to travel with the polymer into cells by receptor mediated internalisation, and subsequently be released into the nucleus following hydrazone degradation. Finally, the ability of the complex to induce a therapeutic effect on prostate cancer cells was investigated through a long term tumour regression study, which confirmed that the DOX-loaded polymers were able to significantly reduce the volume of subcutaneous prostate tumours in vivo in comparison to free doxorubicin and a polymer control, with no adverse toxicity to the animals. This work therefore demonstrates the potential of a hyperbranched polymer system to be utilised for prostate cancer theranostics.

The widespread adoption of RAFT polymerization stems partly from the ease and utility of installing a functional chain transfer agent onto the ends of the generated polymer chains. In parallel, the Passerini multicomponent reaction offers great versatility in converting a wide range of easily accessible building blocks to functional materials. In this work, we have combined the two approaches such that a single, commonly available, RAFT agent is used in Passerini reactions to generate a variety of multifunctional RAFT chain transfer agents containing ester linkages. Reactions to generate the multifunctional RAFT agents took place under mild conditions and in good yields. The resulting Passerini-RAFT agents were able to exert control over radical polymerization to generate materials of well-defined molecular weights and dispersity. Furthermore, the presence in these polymer cores of ester and amide functionality through the Passerini chemistries, provided regions in the materials which are inherently biodegradable, facilitating any subsequent biomedical applications. The work overall thus demonstrates a versatile and facile synthetic route to multi functional RAFT chain transfer agents and biodegradable polymers.

Biocompatible and bio-based materials are an appealing resource for the pharmaceutical industry. Poly(glycerol-adipate) (PGA) is a biocompatible and biodegradable polymer that can be used to produce self-assembled nanoparticles (NPs) able to encapsulate active ingredients, with encouraging perspectives for drug delivery purposes. Starch is a versatile, inexpensive, and abundant polysaccharide that can be effectively applied as a bio-scaffold for other molecules in order to enrich it with new appealing properties. In this work, the combination of PGA NPs and starch films proved to be a suitable biopolymeric matrix carrier for the controlled release preparation of hydrophobic drugs. Dynamic Light Scattering (DLS) was used to determine the size of drug-loaded PGA NPs, while the improvement of the apparent drug water solubility was assessed by UV-vis spectroscopy. In vitro biological assays were performed against cancer cell lines and bacteria strains to confirm that drug-loaded PGA NPs maintained the effective activity of the therapeutic agents. Dye-conjugated PGA was then exploited to track the NP release profile during the starch/PGA nanocomposite film digestion, which was assessed using digestion models mimicking physiological conditions. The collected data provide a clear indication of the suitability of our biodegradable carrier system for oral drug delivery.

Glioblastoma multiforme (GBM) is the most aggressive primary brain tumor. Residual cells at the tumor margin are responsible for up to 85% of GBM recurrences after standard treatment. Despite this evidence, the identification of compounds active on this cell population is still an underexplored field. Herein, starting from the knowledge that kinases are implicated in GBM, we evaluated three in-house pyrazolo[3,4-d]pyrimidines active as Src, Fyn, and SGK1 kinase inhibitors against patient derived cell lines from either the invasive region or contrast-enhanced core of GBM. We identified our Src inhibitor, SI306, as a promising lead compound for eradicating invasive GBM cells. Furthermore, aiming at the development of a feasible oral treatment for GBM, we performed a formulation study using 2D inkjet printing to generate soluble polymer-drug dispersions. Overall, this study led to the identification of a set of polymer-formulated pyrazolo[3,4-d]pyrimidine kinase inhibitors as promising candidates for GBM preclinical efficacy studies.

Combinations of conventional chemotherapeutics with unconventional anticancer agents such as reactive oxygen and nitrogen species may offer treatment benefits for cancer therapies. Here we report a novel polymeric platform combining the delivery of Doxorubicin (DOXO) with the light-regulated release of nitric oxide (NO). An amphiphilic block-copolymer (P1) was designed and synthesized as the drug carrier, with pendant amine groups to attach DOXO via a urea linkage and a NO photodonor (NOPD) activable by visible light. The two grafted-copolymers (P1-DOXO and P1-NOPD) self-assembled via solvent displacement methods into nanoparticles (NPs), containing both therapeutic components (NP1) and, for comparison, the individual NOPD (NP2) and DOXO (NP3). All the NPs were fully characterized in terms of physicochemical, photochemical and photophysical properties. These experiments demonstrated that integration of the NOPD within the polymeric scaffold enhanced the NO photoreleasing efficiency when compared with the free NOPD, and that the proximity to DOXO on the polymer chains did not significantly affect the enhanced photochemical performance. Internalization of the NPs into lung, intestine, and skin cancer cell lines was investigated after co-formulation with Cy5 fluorescent tagged polymers, and cytotoxicity of the NPs against the same panel of cell lines was assessed under dark and light conditions. The overall results demonstrate effective cell internalization of the NPs and a notable enhancement in killing activity of the dual-action therapeutic NP1 when compared with NP2, NP3 and the free DOXO, respectively. This suggests that the combination of DOXO with photoregulated NO release, achieved through the mixed formulation strategy of tailored polymer conjugate NPs, may open new treatment modalities based on the use of NO to improve cancer therapies.

[Image: see text] Glioblastoma multiforme (GBM) is the most aggressive primary brain tumor. Residual cells at the tumor margin are responsible for up to 85% of GBM recurrences after standard treatment. Despite this evidence, the identification of compounds active on this cell population is still an underexplored field. Herein, starting from the knowledge that kinases are implicated in GBM, we evaluated three in-house pyrazolo[3,4-d]pyrimidines active as Src, Fyn, and SGK1 kinase inhibitors against patient derived cell lines from either the invasive region or contrast-enhanced core of GBM. We identified our Src inhibitor, SI306, as a promising lead compound for eradicating invasive GBM cells. Furthermore, aiming at the development of a feasible oral treatment for GBM, we performed a formulation study using 2D inkjet printing to generate soluble polymer–drug dispersions. Overall, this study led to the identification of a set of polymer-formulated pyrazolo[3,4-d]pyrimidine kinase inhibitors as promising candidates for GBM preclinical efficacy studies.

Amorphous solid dispersions are a promising strategy to overcome poor solubility and stability limitations, reducing the crystallinity of the drug through incorporation within a polymer matrix. However, to achieve an effective amorphous solid dispersion, the polymer and drug must be compatible, otherwise the drug can undergo recrystallization. In this work, we investigated the potential of the enzymatically synthesized poly(glycerol-adipate), as a pharmaceutical tool for producing a nanoamorphous formulation. A polymeric prodrug of poly(glycerol-adipate) was synthesized by coupling mefenamic acid as drug. The amorphicity of the polymeric prodrug was assessed combining differential scanning calorimetry and polarized optical microscopy. The prodrug was then formulated into nanoparticles and studied for stability and drug release in the presence of lipase. To realize the goal of combination drug therapies for overcoming drug resistance and improving treatment outcomes, the prodrug was screened as a solubility enhancer for a series of fenamic drugs and compared with commercially available polymers commonly used in solid dispersions. Screening was carried out by developing a high-throughput miniaturized screening assay using a 2D printer to dispense the polymer and drug combinations. Finally, the collected data showed that drug conjugation could improve drug-polymer compatibility, in addition to facilitating the release of drugs by 2 different mechanisms.

In order for synthetic polymers to find widespread practical application as biomaterials, their syntheses must be easy to perform, utilising freely available building blocks, and should generate products which have no adverse effects on cells or tissue. In addition, it is highly desirable that the synthesis platform for the biomaterials can be adapted to generate polymers with a range of physical properties and macromolecular architectures, and with multiple functional handles to allow derivatisation with ‘actives’ for sensing or therapy. Here we describe the syntheses of amphiphilic tri- and tetra-block copolymers, using diazabicyclo[5.4.0]undec-5-ene (DBU) as a metal-free catalyst for ring-opening polymerisations of the widely-utilised monomer lactide combined with a functionalised protected cyclic carbonate. These syntheses employed PEGylated macroinitiators with varying chain lengths and architectures, as well as a labile-ester methacrylate initiator, and produced block copolymers with good control over monomer incorporation, molar masses, side-chain and terminal functionality and physico-chemical properties. Regardless of the nature of the initiators, the fidelity of the hydroxyl end group was maintained as confirmed by a second ROP chain extension step, and polymers with acryloyl/methacryloyl termini were able to undergo a second tandem reaction step, in particular thiol–ene click and RAFT polymerisations for the production of hyperbranched materials. Furthermore, the polymer side-chain functionalities could be easily deprotected to yield an active amine which could be subsequently coupled to a drug molecule in good yields. The resultant amphiphilic copolymers formed a range of unimolecular or kinetically-trapped micellar-like nanoparticles in aqueous environments, and the non-cationic polymers were all well-tolerated by MCF-7 breast cancer cells. The rapid and facile route to such highly adaptable polymers, as demonstrated here, offers promise for a range of bio materials applications.

Hydrogels based on biopolymers, such as alginate, are commonly used as scaffolds in tissue engineering applications as they mimic the features of the native extracellular matrix (ECM). However, in their native state, they suffer from drawbacks including poor mechanical performance and a lack of biological functionalities. Herein, we have exploited a crystallization-driven self-assembly (CDSA) methodology to prepare well-defined one-dimensional micellar structures with controlled lengths to act as a mimic of fibrillar collagen in native ECM and improve the mechanical strength of alginate-based hydrogels. Poly(ε-caprolactone)-b-poly(methyl methacrylate)-b-poly(N, N-dimethyl acrylamide) triblock copolymers were self-assembled into 1D cylindrical micelles with precise lengths using CDSA epitaxial growth and subsequently combined with calcium alginate hydrogel networks to obtain nanocomposites. Rheological characterization determined that the inclusion of the cylindrical structures within the hydrogel network increased the strength of the hydrogel under shear. Furthermore, the strain at flow point of the alginate-based hydrogel was found to increase with nanoparticle content, reaching an improvement of 37% when loaded with 500 nm cylindrical micelles. Overall, this study has demonstrated that one-dimensional cylindrical nanoparticles with controlled lengths formed through CDSA are promising fibrillar collagen mimics to build ECM scaffold models, allowing exploration of the relationship between collagen fiber size and matrix mechanical properties.

Enzymatically synthesised poly(glycerol adipate) (PGA) has shown a palette of key desirable properties required for a biomaterial to be considered a ‘versatile polymeric tool’ in the field of drug delivery. PGA and its variations can self-assemble into nanoparticles (NPs) and interact at different levels with small active molecules. PGA derivatives are usually obtained by functionalising the glyceryl side hydroxyl group present along the main polymer scaffold. However, if the synthetic pathways are not finely tuned, the self-assembling ability of these new polymeric modifications might be hampered by the poor amphiphilic balance. For this reason, we have designed a straightforward one-pot synthetic modification, using a small library of diols in combination with glycerol, aimed at altering the backbone of the polymer without affecting the hydrophilic glyceryl portion. The diols introduce additional functionality into the backbone of PGA alongside the secondary hydroxyl group already present. We have investigated how extra functionalities along the polymer backbone alter the final polymer reactivity as well the chemical and biological properties of the nanoparticles. In addition, with the intent to further improve the green credentials of the enzymatic synthesis, a solvent derived from renewable resources, (2-methyl tetrahydrofuran, 2-MeTHF) was employed for the synthesis of all the PGA-variants as a replacement for the more traditionally used and fossil-based tetrahydrofuran (THF). In vitro assays carried out to evaluate the potential of these novel materials for drug delivery applications demonstrated very low cytotoxicity characteristic against NIH 3T3 model cell line.

This manuscript utilised in vivo multispectral imaging to demonstrate the efficacy of two different nanomedicine formulations for targeting prostate cancer.Pegylated hyperbranched polymers were labelled with fluorescent markers and targeting ligands against two different prostate cancer markers; prostate specific membrane antigen (PSMA) and the protein kinase, EphrinA2 receptor (EphA2). The PSMA targeted nanomedicine utilised a small molecule glutamate urea inhibitor of the protein, while the EphA2 targeted nanomedicine was conjugated to a single-chain variable fragment based on the antibody 4B3 that has shown high affinity to the receptor.Hyperbranched polymers were synthesised bearing the different targeting ligands. In the case of the EphA2-targeting nanomedicine, significant in vitro uptake was observed in PC3 prostate cancer cells that overexpress the receptor, while low uptake was observed in LNCaP cells (that have minimal expression of this receptor). Conversely, the PSMA-targeted nanomedicine showed high uptake in LNCaP cells, with only minor uptake in the PC3 cells. In a dual-tumour xenograft mouse model, the nanomedicines showed high uptake in tumours in which the receptor was overexpressed, with only minimal non-specific accumulation in the low-expression tumours.This work highlighted the importance of clearly defining the target of interest in next-generation nanomedicines, and suggests that dual-targeting in such nanomedicines may be a means to achieve greater efficacy.

N-Substituted derivatives of cantharimide and norcantharimide represent a promising but underutilized motif for therapeutic applications. Herein, we report a divergent strategy for the preparation of secondary amides and norcantharimide-resembling spirocyclic imides from a biomass-derived oxanorbornene and assess their biological activity. Computational modelling suggests these compounds fall perfectly within lead-like chemical space (200 Da

Amphiphilic block co-polymers composed of poly(ethylene glycol)-co-poly(lactide)-co-poly(2-((tert-butoxycarbonyl)amino)-3-propyl carbonate) (PEG-pLA-pTBPC) are synthesized in monomer ratios and arrangements to enable assembly into nanoparticles with different sizes and architectures. These materials are based on components in clinical use, or known to be biodegradable, and retain the same fundamental chemistry across 'AB' and 'BAB' block architectures. In MCF7 and MDA-MB-231 breast cancer cells, nanoparticles of < 100 nm are internalized most rapidly, by both clathrin-and caveolin-mediated pathways. In THP-1 cells, polymer architecture and length of the hydrophilic block is the most important factor in the rate of internalization. The organ distributions of systemically injected nanoparticles in healthy mice indicate highest accumulation of the BAB-blocks in lungs and liver and the lowest accumulation in these organs of a methoxyPEG5000-pLA-pTBPC polymer. Conjugation of doxorubicin via a serum-stable urea linker to the carbonate regions of PEG5000-pLA-pTBPC generates self-assembling nanoparticles which are more cytotoxic in 2D, and penetrate further in 3D spheroids of triple negative breast cancer cells, than the free drug. In an aggressive orthotopic triple negative breast cancer mouse model, the methoxyPEG5000-pLA-pTBPC is of similar potency to free doxorubicin but with no evidence of adverse effects in terms of body weight.

Polymer-drug conjugates have received considerable attention over the last decades due to their potential for improving the clinical outcomes for a range of diseases. It is of importance to develop methods for their preparation that have simple synthesis and purification requirements but maintain high therapeutic efficacy and utilize macromolecules that can be cleared via natural excretory pathways upon breakdown. Herein, the combination of ring-opening polymerization (ROP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization is described for the straightforward synthesis of amphiphilic, stimuli-responsive, biodegradable, and highly functionalizable hyperbranched polymers. These unimolecular nanoparticles demonstrate a versatile platform for the synthesis of polymer-drug conjugates owing to the inclusion of a Boc-protected polycarbonate moiety in either a block or random copolymer formation. A proof-of-concept study on the complexation of the poorly water-soluble antimicrobial drug usnic acid results in polymer-drug complexes with powerful antimicrobial properties against gram-positive bacteria. Therefore, this work highlights the potential of amphiphilic and biodegradable hyperbranched polymers for antimicrobial applications.

This work presents a robust method to achieve the synthesis of low molecular weight polyesters 26 via ring-opening polymerization (ROP) initiated by 2-hydroxyethyl-methacrylate (HEMA) 27 when using triazabicyclodecene (TBD) as catalyst. The effect that the HEMA:TBD ratio has 28 upon the final reaction rate and final polymer molecular architecture is discussed. The optimum 29 HEMA:TBD ratio and reaction conditions required to minimize competing transesterification 30 reactions were determined, in order to synthesize successfully the target ROP macromonomer 31 species containing only a single 2-methacryloyloxyethyl end-group. Additionally, to confirm 32 the terminal end-group fidelity of the product macromonomers and confirm TBD utility for 33 block copolymer manufacture, a small series of di-block polyesters were synthesized using 34 TBD and shown to exhibit good control over the final polymer structure whilst negating the 35 side transesterification reactions, irrespective of the monomers used.

Metal oxide microparticles with well-defined internal mesostructures are promising materials for a variety of different applications, but practical routes to such materials that allow the constituent structural length scales to be precisely tuned have thus far been difficult to realize. Herein, we describe a novel platform methodology that utilizes self-assembled block copolymer (BCP) microparticles synthesized by dispersion polymerization in supercritical CO

Theranostics offers an improved treatment strategy for prostate cancer by facilitating simultaneous targeting of tumour cells with subsequent drug delivery and imaging. In this report we describe the synthesis of hyperbranched polymers that are biocompatible, can specifically target and be internalised by prostate cancer cells (through targeting of prostate-specific membrane antigen – PSMA) and ultimately facilitate controlled delivery of a model drug. The theranostic also incorporates a far-red fluorescent dye that allows tracking of the polymer via optical imaging. Controlled synthesis of the polymer is achieved via reversible addition fragmentation chain transfer polymerisation of polyethylene glycol monomethyl methacrylate, with ethylene glycol dimethacrylate as the branching agent. Incorporation of 20 mol% of an hydrazide-methacrylate monomer allows post-ligation of a model drug, fluorene-2-carboxaldehyde, through a hydrolytically-degradable hydrazone linkage. The rate of degradation of this particular linker was enhanced at endosomal pH (pH = 5.5) where [similar]95% of the model drug was released in 4 hours compared to less than 5% released over the same period at physiological pH. The theranostic showed high uptake into prostate cancer cells expressing prostate-specific membrane antigen, while minimal uptake was observed in PC3 cells negative for PSMA, highlighting the enhanced efficacy of the targeting ligand.

The self‐assembly of specific polymers into well‐defined nanoparticles (NPs) is of great interest to the pharmaceutical industry as the resultant materials can act as drug delivery vehicles. In this work, a high‐throughput method to screen the ability of polymers to self‐assemble into NPs using a picoliter inkjet printer is presented. By dispensing polymer solutions in dimethyl sulfoxide (DMSO) from the printer into the wells of a 96‐well plate, containing water as an antisolvent, 50 suspensions are screened for nanoparticle formation rapidly using only nanoliters to microliters. A variety of polymer classes are used and in situ characterization of the submicroliter nanosuspensions shows that the particle size distributions match those of nanoparticles made from bulk suspensions. Dispensing organic polymer solutions into well plates via the printer is thus shown to be a reproducible and fast method for screening nanoparticle formation which uses two to three orders of magnitude less material than conventional techniques. Finally, a pilot study for a high‐throughput pipeline of nanoparticle production, physical property characterization, and cytocompatibility demonstrates the feasibility of the printing approach for screening of nanodrug delivery formulations. Nanoparticles are produced in the well plates, characterized for size and evaluated for effects on metabolic activity of lung cancer cells.

Targeted nanomedicines offer a strategy for greatly enhancing accumulation of a therapeutic within a specific tissue in animals. In this study, we report on the comparative targeting efficiency toward prostate-specific membrane antigen (PSMA) of a number of different ligands that are covalently attached by the same chemistry to a polymeric nanocarrier. The targeting ligands included a small molecule (glutamate urea), a peptide ligand, and a monoclonal antibody (J591). A hyperbranched polymer (HBP) was utilized as the nanocarrier and contained a fluorophore for tracking/analysis, whereas the pendant functional chain-ends provided a handle for ligand conjugation. Targeting efficiency of each ligand was assessed in vitro using flow cytometry and confocal microscopy to compare degree of binding and internalization of the HBPs by human prostate cancer (PCa) cell lines with different PSMA expression status (PC3-PIP (PSMA+) and PC3-FLU (PSMA-). The peptide ligand was further investigated in vivo, in which BALB/c nude mice bearing subcutaneous PC3-PIP and PC3-FLU PCa tumors were injected intravenously with the HBP-peptide conjugate and assessed by fluorescence imaging. Enhanced accumulation in the tumor tissue of PC3-PIP compared to PC3-FLU highlighted the applicability of this system as a future imaging and therapeutic delivery vehicle.

Yeast phosphofructo-1-kinase (Pf1k) and pyruvate kinase (Pyk1) are allosterically regulated enzymes that catalyse essentially irreversible reactions in glycolysis. Both the synthesis and activity of these enzymes are tightly regulated. To separate experimentally the control of Pf1k and Pyk1 synthesis from their allosteric regulation, a congenic set of PFK1, PFK2 and PYK1 mutants was constructed in which these wild-type coding regions were driven by alternative promoters. Mutants carrying PGK1 promoter fusions displayed normal rates of growth, glucose consumption and ethanol production, indicating that the relatively tight regulation of Pyk1 and Pf1k synthesis is not essential for glycolytic control under fermentative growth conditions. Mutants carrying fusions to an enhancer-less version of the PGK1 promoter (PGK1(Delta767)) expressed Pyk1 and Pf1k at about 2.5-fold lower levels than normal. Physiological and metabolic analysis of the PFK1 PFK2 double mutant indicated that decreased Pf1k had no significant effect on growth, apparently due to compensatory increases in its positive effector, fructose 2,6-bisphosphate. In contrast, growth rate and glycolytic flux were reduced in the PGK1(Delta767)-PYK1 mutant, which had decreased Pyk1 levels. Unexpectedly, the reduced Pyk1 levels caused the flow of carbon to the TCA cycle to increase, even under fermentative growth conditions. Therefore, Pyk1 exerts a significant level of control over both the rate and direction of carbon flux in yeast.

The mechanisms by which the weak acid preservative benzoic acid inhibits the growth of Saccharomyces cerevisiae have been investigated. A reduction in the pyruvate kinase level, which decreases glycolytic flux, did not increase the sensitivity of yeast to benzoic acid. However, a decrease in 6-phosphofructo-1-kinase (PF1K), which does not affect glycolytic flux, did increase sensitivity to benzoic acid. Also, resistance was increased by elevating PF1K levels. Hence, resistance to benzoic acid was not dependent upon optimum glycolytic flux, but upon an adequate PF1K activity. Benzoic acid was shown to depress fructose 2,6-bisphosphate levels in YKC14, a mutant with low PF1K levels. This effect was partially suppressed by overexpressing constitutively active 6-phosphofructo-2-kinase (Pfk26(Asp644)) or by inactivating fructose-2,6-bisphosphatase (in a Deltafbp26 mutant). The inactivation of PF2K (in a Deltapfk26 Deltapfk27 mutant) increased benzoic acid sensitivity. Therefore, the antimicrobial effects of benzoic acid can be relieved, at least in part, by the genetic manipulation of PF1K or fructose 2,6-bisphosphate levels.

The stress-activated protein kinase (SAPK) pathway plays a central role in coordinating gene expression in response to diverse environmental stress stimuli. We examined the role of this pathway in the translational response to stress in Schizosaccharomyces pombe . Exposing wild-type cells to osmotic stress (KCl) resulted in a rapid but transient reduction in protein synthesis. Protein synthesis was further reduced in mutants disrupting the SAPK pathway, including the mitogen-activated protein kinase Wis1 or the mitogen-activated protein kinase Spc1/Sty1, suggesting a role for these stress response factors in this translational control. Further polysome analyses revealed a role for Spc1 in supporting translation initiation during osmotic stress, and additionally in facilitating translational adaptation. Exposure to oxidative stress (H 2 O 2 ) resulted in a striking reduction in translation initiation in wild-type cells, which was further reduced in spc1 − cells. Reduced translation initiation correlated with phosphorylation of the α subunit of eukaryotic initiation factor 2 (eIF2α) in wild-type cells. Disruption of Wis1 or Spc1 kinase or the downstream bZip transcription factors Atf1 and Pap1 resulted in a marked increase in eIF2α phosphorylation which was dependent on the eIF2α kinases Hri2 and Gcn2. These findings suggest a role for the SAPK pathway in supporting translation initiation and facilitating adaptation to environmental stress in part through reducing eIF2α phosphorylation in fission yeast.

The cell cycles of the budding yeast Saccharomyces cerevisiae and the fission yeast, Schizosaccharomyces pombe are currently the best understood of all eukaryotes. Studies in these two evolutionarily divergent organisms have identified common control mechanisms, which have provided paradigms for our understanding of the eukaryotic cell cycle. This chapter provides an overview of our current knowledge of the molecules and mechanisms that regulate the mitotic cell cycle in these two yeasts.

The DNA integrity checkpoint and stress kinase (SAPK/JNK and p38) pathways function to modulate cell-cycle, apoptotic and transcriptional responses to stress. Although initially considered to function independently, recent advances indicate a number of links between the stress-response and checkpoint pathways. Here, we consider the relationship between the stress-response and checkpoint pathways and how they interact to modulate cell-cycle control.

Research into advanced therapeutic materials is of growing importance worldwide, particularly in the disease areas of infection, neurodegeneration, and oncology. Advances have been made in treating these diverse pathologies but there still remain many challenging areas. Amongst the most difficult are those involving highly potent and/or cytotoxic agents which present the inherent problem of adverse off-target effects. Of key importance is to widen the therapeutic window for such agents by reducing access to non-diseased cells and enhancing release at targeted sites. Spatiotemporal controlled release can be achieved by exploiting physical, chemical, or biological stimuli present at the specific diseased area. A crucial strategy involves drug-carrier linkages able to respond to physiological or biochemical stimuli present in the disease region, and there is now significant literature on (polymeric) prodrugs based on the drug + carrier + cleavable linker philosophy, predominantly for cancer applications. The authors therefore focus this mini-review primarily on single/multi stimuli-responsive prodrugs for cancer therapies, covering prominent examples of prodrug chemistries used to endow polymers with controlled and site-specific drug delivery properties. Additionally, the possibilities for exploiting similar approaches to disease-associated stimuli present in bacterial and viral infections, inflammatory and immune diseases, and in degenerative disorders are emphasized.