41 results on '"Ambrosio, Elisa Paola"'
Search Results
2. Microstructural investigation of as-fabricated and heat-treated Inconel 625 and Inconel 718 fabricated by direct metal laser sintering: contribution of Politecnico di Torino and Istituto Italiano di Tecnologia (IIT) di Torino
3. Inconel 625 by Direct Metal Laser Sintering: Effects of the Process Parameters and Heat Treatments on Microstructure and Hardness
4. Platinum catalyst supported on mesoporous carbon for PEMFC
5. Nanostructured bimetallic alloys prepared via mechanochemical synthesis as PEMFC electrocatalysts for automotive applications
6. Mesoporous carbons as low temperature fuel cell platinum catalyst supports
7. Microstructural and Mechanical Characterization of Aluminum Matrix Composites Produced by Laser Powder Bed Fusion
8. Analysis of corrosion resistance of the AlSi10Mg alloy obtained by Additive Manufacturing in chloride solution
9. Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance
10. Aluminium matrix nano composites by DMLS: effect of the nanoparticles on the microstructure and mechanical properties
11. Corrosion resistance of direct metal laser sintering AlSiMg alloy
12. Selective Laser Melting Manufacturing of Microwave Waveguide Devices
13. Overview on Additive Manufacturing Technologies
14. Microstructural and mechanical characterization of AlSi10Mg – TiB2 composites produced by direct metal laser sintering technique
15. Effect of superficial and heat treatment on corrosion resistance of DMLS AlSiMg alloy
16. Enhanced topology of E-plane resonators for high-power satellite applications
17. Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB2 Composites Produced by Direct Metal Laser Sintering (DMLS)
18. Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys
19. Enhanced Topology of $E$-Plane Resonators for High-Power Satellite Applications
20. Study of Micro hardness, Roughness, Wear and Corrosion Behaviour of Ni/CNT and Ni/GNP Composite Coatings Produced by Electrodeposition
21. BaTiO3 nanotube arrays by hydrothermal conversion of TiO2 nanotube carpets grown by anodic oxidation
22. GIUNTO ARTICOLARE PER ESOSCHELETRO, IN PARTICOLARE PER APPLICAZIONI AEROSPAZIALI
23. Additive manufacturing for agile legged robots with hydraulic actuation
24. Multistrato in carburo di silicio prodotti mediante tape casting per applicazione come protezione termica di veicoli spaziali
25. On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS
26. Platinum supported on mesoporous carbon as electrocatalyst for PEM FUEL CELLS
27. Influence of ice on MEAs of PEM-FCs
28. Effect of freezing on PEM-FC components
29. PLATINUM CATALYSTS SUPPORTED ON MESOPOROUS CARBON FOR PEMFC
30. Platinum catalysts supported on mesoporous carbons for PEMFC applications
31. Mesoporous carbons as fuel cell Platinum catalyst support
32. Use of voltammetric cycles for the re-activation of degradated MEA
33. Pt catalyst supported on mesoporous carbon for PEMFC applications
34. Pt catalyst supported on mesocarbons for PEMFC
35. Effect of Process and Post-Process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion.
36. On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties.
37. Management and characterization of polymer electrolyte membrane fuel cell
38. Gestione e caratterizzazione di Celle a Combustibile ad elettrolita polimerico
39. Characterization of PEMFC single cells and stacks performance and operating life via long time tests
40. Towards a hand exoskeleton for a smart EVA glove
41. From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering.
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.