Search

Renewable energy generation is increasingly important due to serious energy issues. A Doubly Salient Permanent Magnet Generator (DSPMG) can be an interesting candidate for tidal stream renewable energy systems. However, the special structure makes the system nonlinear and strongly coupled even after Park transformation and involves a larger torque ripple. Previous research mainly focused on model-based control for this machine, which is very sensitive to the parameters. Thus, to control the complex systems stably and accurately, two model-free control algorithms, Active Disturbance Rejection-Based Iterative Learning Control (ADRILC) and Active Disturbance Rejection Control–Iterative Learning Control (ADRC–ILC), are proposed for the current and speed control loops of a DSPMG-based Tidal Stream Turbine (TST), respectively. ADRC–ILC uses ADRC to deal with the external non-periodic speed ripple and adopts ILC to reduce the internal periodic speed ripple. ADRILC employs an iterative method to improve the ESO for the enhancement of the convergence rate of ILC. Considering the variable tidal speed, when the speed is above the rated value, Maximum Power Point Tracking (MPPT) must be changed to a power limitation strategy for limiting the generator power to the rated value and extending the system operating range. Thus, Optimal Tip Speed Ratio (OTSR)-based MPPT (for a low tidal current speed) and Leading Angle Flux-Weakening Control (LAFWC) (for a high tidal current speed) strategies are also proposed. According to the simulation results, the proposed ADRC–ILC + ADRILC has the lowest torque ripple, the highest control accuracy, as well as a good current tracking capability and strong robustness. At the rated speed, the proposed method reduces the torque ripple by more than 20% and the speed error by about 80% compared with PI control: the current difference is limited in 2A. The LAFWC proposed for an excessive tidal current speed is effective in conserving the electromagnetic power and increasing the generator speed. [ABSTRACT FROM AUTHOR]

In an attempt to provide reliable power distribution, smart grids integrate monitoring, communication, and control technologies for better energy consumption and management. As a result of such cyberphysical links, smart grids become vulnerable to cyberattacks, highlighting the significance of detecting and monitoring such attacks to uphold their security and dependability. Accordingly, the use of phasor measurement units (PMUs) enables real-time monitoring and control, providing informed-decisions data and making it possible to sense abnormal behavior indicative of cyberattacks. Similar to the ways it dominates other fields, deep learning has brought a lot of interest to the realm of cybersecurity. A common formulation for this issue is learning under data complexity, unavailability, and drift connected to increasing cardinality, imbalance brought on by data scarcity, and fast change in data characteristics, respectively. To address these challenges, this paper suggests a deep learning monitoring method based on robust feature engineering, using PMU data with greater accuracy, even within the presence of cyberattacks. The model is initially investigated using condition monitoring data to identify various disturbances in smart grids free from adversarial attacks. Then, a minimally disruptive experiment using adversarial attack injection with various reality-imitating techniques is conducted, inadvertently damaging the original data and using it to retrain the deep network, boosting its resistance to manipulations. Compared to previous studies, the proposed method demonstrated promising results and better accuracy, making it a potential option for smart grid condition monitoring. The full set of experimental scenarios performed in this study is available online. [ABSTRACT FROM AUTHOR]

Grid-connected inverters are widely used to integrate energy into the grid in renewable energy applications. However, the inverter usually has a high probability of failure due to a large number of semiconductor devices. In addition, especially in the field of marine renewable energy, the humid environment in offshore and coastal areas may make the inverter more prone to failure, which reduces system reliability. Therefore, a serial fault-tolerant topology based on a sustainable reconfiguration is proposed. The proposed topology can be reconfigured continuously by making full use of healthy devices, which can ensure the output voltage capability and improve the possibility of uninterrupted performance as much as possible. In addition, the cooperative modulation signal is selected for the recombined topology to output the desired voltage, which ensures the quality of the power generated by marine renewable energy. Principles of topology reconfiguration and modulation signal selection is described in detail. Simulation and experimental results verify the validation of the proposed method on the seven-level grid-connected inverter. [ABSTRACT FROM AUTHOR]