Search

Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel structure of CFO and the perovskite structure of BCTSn. The magnetic character of the resultant CFO@BCTSn NFs was determined by SQUID magnetometry. The piezoelectricity was verified using piezo-response force microscopy, which revealed an entirely covered ferroelectric shell outline, in accordance with SEM and TEM observations. The magnetoelectric (ME) coefficient was measured as a function of the applied external DC magnetic field. The maximum ME coefficient obtained for the CFO@BCTSn NFs was 346 mV cm-1 Oe-1. The high magnetoelectric coupling suggests that CFO@BCTSn NFs could be a promising candidate for magnetic field sensor and magnetoelectric device applications.

Lead-free ba0.85ca0.15zr0.1ti0.9o3 (bczt) ceramic powders were synthesized using the sol-gel method. to achieve high-energy storage and large electrocaloric effect in bulk ceramics the ceramics thickness was reduced. dielectric, ferroelectric, energy storage, and electrocaloric properties were investigated for bczt ceramic with 400 {\mu}m. here, pure crystalline structure and homogenous microstructure were identified by xrd analysis and sem measurements, respectively. the dielectric measurements revealed a maximum dielectric constant associated with ferroelectric-paraelectric phase transition. the maximum of {\epsilon} was 7841 around 352 k. furthermore, the bczt ceramic showed improved energy storage and electrocaloric properties. a high recoverable energy density wrec of 0.24 j/cm3 and a total energy density wtotal of 0.27 j/cm3 with an efficiency coefficient of ~ 88% at 423 k under an electric field of 55 kv/cm was obtained. besides, the maximum value of {\delta}t = 2.32 k, the electrocaloric responsivity {\zeta} = 0.42 k mm/kv, the refrigeration capacity rc= 4.59 j/kg and the coefficient of performance cop = 12.38 were achieved around 384 k under 55 kv/cm. the total energy density wtotal and the temperature change {\delta}t were also calculated by exploiting the landau-ginzburg-devonshire (lgd) theory. the theoretical results matched the experimental findings. these results suggest that the synthesized bczt ceramic with the reduced thickness could be a promising candidate for energy storage and electrocaloric applications.

This work focuses on the microstructure, magnetic properties and magnetocaloric effect of CoFe$_2$O$_4$ (CFO) nanoparticles elaborated by sol-gel auto combustion method. The XRD investigation indicates that CFO is crystallized in a cubic spinel structure and the SEM micrograph shows a fine quasi-spherical with an average grain sizes of 160 nm. The temperature dependence of the Raman spectra reveals the ferromagnetic to paramagnetic (FM-PM) transition started from 723 K and the magnetization versus temperature measurements shows the Curie temperature located at T$_{\rm C}$ = 785 K. Large value of magnetocaloric temperature change of $\Delta$T =11.2 K with a high RCP of 687.56 J Kg$^{-1}$ are achieved indirectly via the Maxwell approach making our CFO nanopowder suitable candidate for both environmentally friendly magnetic refrigeration and medical applications at ambient temperature.

Structural, dielectric, ferroelectric, energy storage properties, and electrocaloric effect were studied in lead-free ceramic Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) elaborated by sol-gel method. Phase purity structure was confirmed from X-ray data using Rietveld refinement analysis which revealed the coexistence of tetragonal (P4mm) and orthorhombic (Amm2) symmetries at room temperature. Phase transitions were detected by dielectric and differential scanning calorimetry results. Energy storage properties were determined from P-E hysteresis, and the electrocaloric properties were calculated indirectly via the Maxwell approach. The large value of electrocaloric temperature change of $\Delta$T=0.807 K obtained at a relatively small field of 30 kV cm$^{-1}$ and high energy storage efficiency can make BCTSn ceramic a promising candidate for environmentally friendly refrigeration and energy storage applications.

Ferroelectric glass-ceramics are promising composite materials with dual properties, of high dielectric permittivity and high dielectric breakdown strength. In this context, new phosphate glass-ceramics 2BaO-0.5Na2O 2.5[(1-x)Nb2O5 xWO3]-1P2O5 (x=0, 0.1, 0.2, 0.3 and 0.4) designated as B0, B1, B2, B3, B4 respectively, were prepared by the controlled crystallization technology and then crystallized at high temperature of 760 {\deg}C for 10 hours. Subsequently, the obtained glass-ceramics were studied by Differential Scanning Calorimetry (DSC), X-ray powder diffraction (XRD), Raman, impedance spectroscopy, and the P-E hysteresis loops. All of these techniques allowed the identification of Ba2Na4W2Nb8O30 phase with tungsten bronze structure embedded in the glassy matrix. The density of glass-ceramics was found to increase with increasing tungsten content to reach a maximum at x =0.3 and then decreases. Dielectric and conductivity parameters were found to be governed by the presence of oxygen vacancies. Room temperature energy storage property which depends on the composition X, was performed using P-E hysteresis loops of the glass-ceramics. The optimum discharge density was obtained for B3 with an energy efficiency of 73.77%., Comment: 19 pages, 9 figures

Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramic exhibits excellent dielectric, ferroelectric and piezoelectric properties at the Morphotropic Phase Boundary (MPB). Previously, we demonstrated that the use of the anionic surfactant Sodium Dodecyl Sulfate (SDS, NaC12H25SO4) could enhance the dielectric properties of BCZT ceramic using surfactant-assisted solvothermal processing [1]. In the present study, structural, dielectric, ferroelectric properties, as well as electrocaloric effect and energy storage performances of this BCZT ceramic were thoroughly investigated. X-ray diffraction (XRD) measurements revealed the presence of single perovskite phase at room temperature with the coexistence of orthorhombic and tetragonal symmetries. In-situ Raman spectroscopy results confirmed the existence of all phase transitions from rhombohedral through orthorhombic and tetragonal to cubic symmetries when the temperature varies as reported in undoped-BaTiO3. Evolution of energy storage performances with temperature have been investigated. BCZT ceramic exhibits a high energy storage efficiency of ~80% at 120 {\deg}C. In addition, the electrocaloric responsivity was found to be 0.164.10-6 K.m/V at 360 K.

Lead-free Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCZT) ceramics had attracted much attention for the fabrication of microelectronic devices by virtue of their excellent dielectric, ferroelectric and piezoelectric properties. To understand the effects of both mean grain size and grain size distribution on the dielectric properties of lead-free Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCZT) ferroelectric relaxors, an original method was proposed. It is based on the surfactant-assisted solvothermal processing coupled with low-temperature conventional sintering at 1250 {\deg}C. In this way, three highly dense BCZT with different mean grain size and dissimilar grain size distribution were designed. A significant increase of dielectric properties was obtained by a control of grain size and densification process. The dielectric constants measured were ranged from 5370 to 9646 and the dielectric loss was enhanced by 70%. Surprisingly, it was evidenced that there is unequivocal link between mean grain size with dielectric properties. Indeed, it was found that the presence of high density of refined grains leads to an improvement of dielectric properties due to an enhancement of densification. This work may provide a new strategy to design ferroelectric materials with enhanced properties., Comment: Superlattices and Microstructures 2018