Search

Abstract Objectives To investigate the effect of neutral 10-methacryloyloxydecyl dihydrogen phosphate salt (MDP-Na) on the dentin bond strength and remineralization potential of etch-&-rinse adhesive. Methods Two experimental etch-&-rinse adhesives were formulated by incorporating 0 wt% (E0) or 20 wt% (E20) neutral MDP-Na into a basic primer. A commercial adhesive, Adper Single Bond 2 (SB, 3 M ESPE), served as the control. Sixty prepared teeth were randomly allocated into three groups (n = 20) and bonded using either one of the experimental adhesives or SB. Following 24 h of water storage, the bonded specimens were sectioned into resin-dentin sticks, with four resin-dentin sticks obtained from each tooth for microtensile bond strength (MTBS) test. Half of the sticks from each group were immediately subjected to tensile loading using a microtensile tester at a crosshead speed of 1 mm/min, while the other half underwent tensile loading after 6-month incubation in artificial saliva (AS). The degree of conversion (DC) of both the control and experimental adhesives (n = 6 in each group) and the adsorption properties of MDP-Na on the dentin organic matrix (n = 5 in each group) were determined using Fourier-transform infrared spectrometry. Furthermore, the effectiveness of neutral MDP-Na in promoting the mineralization of two-dimensional collagen fibrils and the adhesive-dentin interface was explored using transmission electron microscopy and selected-area electron diffraction. Two- and one-way ANOVA was employed to assess the impact of adhesive type and water storage on dentin bond strength and the DC (α = 0.05). Results The addition of MDP-Na into the primer increased both the short- and long-term MTBS of the experimental adhesives (p = 0.00). No difference was noted in the DC between the control, E0 and E20 groups (p = 0.366). The MDP-Na remained absorbed on the demineralized dentin even after thorough rinsing. The intra- and extra-fibrillar mineralization of the two-dimensional collagen fibril and dentin bond hybrid layer was confirmed by transmission electron microscopy and selected-area electron diffraction when the primer was added with MDP-Na. Conclusions The use of neutral MDP-Na results in high-quality hybrid layer that increase the dentin bond strength of etch-&-rinse adhesive and provides the adhesive with remineralizing capability. This approach may represent a suitable bonding strategy for improving the dentin bond strength and durability of etch-&-rinse adhesive.

Abstract Background The treatment strategy for patients with severe tooth wear associated with Class II Division 2 malocclusion remains a major challenge for dental practitioners. Objectives To systematically review and summarize the literature on treatment strategies, restoration procedures and clinical outcomes for Class II Division 2 malocclusion patients with severe tooth wear. Methods A literature review was conducted using Pubmed, Embase, the Cochrane Library, and Web of Science to identify eligible articles. Publications until October 16th, 2023 were searched independently and cross-checked by two researchers. Results Of 1513 articles screened, 10 reports detailed treatment processes, including six males and four females aged 34–68 years old. Four articles recorded pre-treatment freeway space (FWS) values ranging from 5 to 9 mm. All ten cases had significant occlusal vertical dimension (OVD) loss and the increase in OVD after treatment ranged from 1 to 7 mm. Pre-prosthetic orthodontic treatment was performed in two cases, in one of which only the maxillary region was orthodontically treated. The most common restorations provided were full coverage restorations. In most cases, temporary restorations were applied before the permanent restorations for eight weeks to six months. Four different sequences of final restoration were proposed. Follow-up ranged from four months to six years and included seven patients, one of them showed symptoms of temporomandibular disorder (TMD). Conclusions A multidisciplinary team (MDT) approach to treatment is recommended. Consideration of pre-prosthetic orthodontic treatment is essential. Commonly used cephalometric measurements for anterior teeth include the interincisal angle and collum angle. The increases in OVD ranging from 1 to 7 mm can be effectively accommodated. Temporary restorations are recommended to accommodate the OVD, and the transition periods of 8 weeks to 6 months help the patients adapted well. Four different sequences for final rehabilitation have demonstrated positive clinical outcomes. Full crown restorations have emerged as the preferred choice for the ultimate restoration of these patients.

Abstract Background Anthocyanins are water-soluble flavonoids in plants, which give plants bright colors and are widely used as food coloring agents, nutrients, and cosmetic additives. There are several limitations for traditional techniques of collecting anthocyanins from plant tissues, including species, origin, season, and technology. The benefits of using engineering microbial production of natural products include ease of use, controllability, and high efficiency. Results In this study, ten genes encoding enzymes involved in the anthocyanin biosynthetic pathway were successfully cloned from anthocyanin-rich plant materials blueberry fruit and purple round eggplant rind. The Yeast Fab Assembly technology was utilized to construct the transcriptional units of these genes under different promoters. The transcriptional units of PAL and C4H, 4CL and CHS were fused and inserted into Chr. XVI and IV of yeast strain JDY52 respectively using homologous recombination to gain Strain A. The fragments containing the transcriptional units of CHI and F3H, F3’H and DFR were inserted into Chr. III and XVI to gain Strain B1. Strain B2 has the transcriptional units of ANS and 3GT in Chr. IV. Several anthocyanidins, including cyanidin, peonidin, pelargonidin, petunidin, and malvidin, were detected by LC-MS/MS following the predicted outcomes of the de novo biosynthesis of anthocyanins in S. cerevisiae using a multi-strain co-culture technique. Conclusions We propose a novel concept for advancing the heterologous de novo anthocyanin biosynthetic pathway, as well as fundamental information and a theoretical framework for the ensuing optimization of the microbial synthesis of anthocyanins.

Background: Interdigital tinea pedis is the most common type of foot infection, which is often treated by topical or systemic antifungals. Due to the increase in antifungal resistance, antifungal socks are becoming potential alternatives for the daily management of tinea pedis. Methods: In this study, antifungal fibres were adopted to produce interdigital hygiene socks to split the third and fourth toe seams of the feet. In vitro antifungal activity was first examined to verify the effectiveness of the socks. Preventive efficacy against tinea pedis was then evaluated among healthy participants, followed by therapeutic effect detection in patients diagnosed with tinea pedis by analysing the improvement in total symptom scores (TTS). Results: The interdigital-type hygiene socks exhibited apparent antifungal activities in vitro. An in vivo study demonstrated significant preventive effects against tinea pedis for interdigital socks compared to plain socks (P = 0.011) and a lower TTS than noninterdigital (P = 0.04) or plain socks (P

Abstract The constant emergence of SARS-CoV-2 variants continues to impair the efficacy of existing neutralizing antibodies, especially XBB.1.5 and EG.5, which showed exceptional immune evasion properties. Here, we identify a highly conserved neutralizing epitope targeted by a broad-spectrum neutralizing antibody BA7535, which demonstrates high neutralization potency against not only previous variants, such as Alpha, Beta, Gamma, Delta and Omicron BA.1-BA.5, but also more recently emerged Omicron subvariants, including BF.7, CH.1.1, XBB.1, XBB.1.5, XBB.1.9.1, EG.5. Structural analysis of the Omicron Spike trimer with BA7535-Fab using cryo-EM indicates that BA7535 recognizes a highly conserved cryptic receptor-binding domain (RBD) epitope, avoiding most of the mutational hot spots in RBD. Furthermore, structural simulation based on the interaction of BA7535-Fab/RBD complexes dissects the broadly neutralizing effect of BA7535 against latest variants. Therapeutic and prophylactic treatment with BA7535 alone or in combination with BA7208 protected female mice from the circulating Omicron BA.5 and XBB.1 variant infection, suggesting the highly conserved neutralizing epitope serves as a potential target for developing highly potent therapeutic antibodies and vaccines.

Abstract The prism-interprisms level of the enamel hierarchical microstructure is the largest degree of structural variation and most sophisticated structural adaptation. We studied the effect of the prism-interprisms three-dimension spatial microstructure on the enamel bond strength. We prepared 11 groups of enamel segments: longitudinally sectioned segments with or without a 45-degree bevel (group = 2), horizontally sectioned segments with or without a 45-degree bevel of three regions (the incisal, middle, and cervical) (group = 6), and tangential (labial) sectioned segments of three regions (the incisal, middle, and cervical) (group = 3). The finished surface of each segment was observed by scanning electric microscopy (SEM) before treatment with four self-etch adhesive systems and applied with four corresponding composite resins. Resin-bonded enamel samples were prepared in beams for microtensile bond strength (MTBS) tests. The results were analyzed with a three-way ANOVA followed by Tukey’s post-hoc HSD multiple comparisons procedure. SEM observations revealed complex arrangements of prisms and interprisms. MTBS measurement showed that the longitudinally sectioned group had the lowest value, without significant differences between the groups with or without 45-degree bevel. Combining SEM observations and MTBS measurements, the prism-interprisms microstructure varied with the incisor regions, and different prism-interprisms microstructures allowed diverse sectioned surfaces, which could affect the enamel bonding.

Abstract Microplastics (MPs) produced by the decomposition of plastics exist persistently, interfering with soil fertility and plant nutrition. Both arbuscular mycorrhizal (AM) fungi and earthworms are beneficial in terrestrial ecosystems, but their interactions under MPs contamination are unclear so far. Here, the influences of inoculating earthworms (Eisenia fetida) on indigenous AM fungi and pepper (Capsicum annuum L.) growth were investigated in a vegetable soil treated with 0.1% low-density polyethylene (LDPE), while the specific interactions of earthworm and AM fungus (Funneliformis caledonium) under LDPE contamination were further resolved in another experiment using sterilized soil. Inoculation of earthworms shifted soil AM fungal community structure, replacing the predominant genus Glomus by Paraglomus, and increased the abundance, diversity (i.e., Shannon) index, and root colonization rate of AM fungi by 108, 34.6 and 45.0%, respectively. Earthworms also significantly decreased soil pH, and significantly increased soil alkaline phosphatase (ALP) activity, shoot biomass and fruit yield of pepper by 394, 82.8 and 188%, respectively. In the sterilized soil, both E. fetida and F. caledonium improved pepper growth, while the latter noticeably increased phosphorus (P) translocation efficiency from root to shoot, and the combination induced the highest soil ALP activity and pepper fruit yield. Furthermore, the significantly interactive effects between earthworm and AM fungus were observed in soil pH and available P concentration, as well as in shoot P concentration and fruit yield of pepper. This study revealed the interaction between earthworms and AM fungi under MPs contamination conditions for the first time, indicating that earthworms could facilitate vegetable growth via enhancing the propagation and P-promoting function of AM fungi in LDPE-contaminated soils. Graphical Abstract