Search

Ethylenediaminetetraacetic acid (EDTA) is widely used in the life sciences as chelating ligand of metal ions. However, formation of supramolecular EDTA aggregates at pH > 8 has been reported, which may lead to artifactual assay results. When applied as a buffer component at pH ≈ 10 in differential scanning fluorimetry (TSA) using SYPRO Orange as fluorescent dye, we observed a sharp change in fluorescence intensity about 20°C lower than expected for the investigated protein. We hypothesized that this change results from SYPRO Orange/EDTA interactions. TSA experiments in the presence of SYPRO Orange using solutions that contain EDTA-Na+ but no protein were performed. The TSA experiments provide evidence that suggests that at pH > 9, EDTA4- interacts with SYPRO Orange in a temperature-dependent manner, leading to a fluorescence signal yielding a “denaturation temperature” of ~68°C. Titrating Ca2+ to SYPRO Orange and EDTA solutions quenched fluorescence. Ethylene glycol tetraacetic acid (EGTA) behaved similarly to EDTA. Analytical ultracentrifugation corroborated the formation of EDTA aggregates. Molecular dynamics simulations of free diffusion of EDTA-Na+ and SYPRO Orange of in total 27 μs suggested the first structural model of EDTA aggregates in which U-shaped EDTA4- arrange in an inverse bilayer-like manner, exposing ethylene moieties to the solvent, with which SYPRO Orange interacts. We conclude that EDTA aggregates induce a SYPRO Orange-based fluorescence in TSA. These results make it relevant to ascertain that future TSA results are not influenced by interference between EDTA, or EDTA-related molecules, and the fluorescent dye.

Orange terpenes, carvacrol and tocopherol were used as model substances for flavours, essential oils and lipophilic liquid (bio)-active ingredients (AI). They were encapsulated via a batch mixing process in various carbohydrate matrices containing maltodextrin and sucrose. Plasticizing properties of the AIs, independently from their concentration (4.5–8.8%), on the matrices were not obtained. Furthermore the AIs did not affect the solid state properties, especially the crystalline content, of the carbohydrate matrix. An AI retention between 6% and 100% correlated inversely with the vapour pressure of the pure AI. At a mixing time of 5 min a vapour pressure of higher than 70 kPa led to a almost completely loss of the AI. The AI retention and the solid state of the matrices were not affected by applying different cooling conditions. These results can be used to adjust the parameters of an extrusion process to receive high AI retention.

Marine-derived bacteria and fungi are promising sources of novel bioactive compounds that are important for drug discovery programs. However, as encountered in terrestrial microorganisms there is a high rate of redundancy that results in the frequent re-discovery of known compounds. Apparently only a part of the biosynthetic genes that are harbored by fungi and bacteria are transcribed under routine laboratory conditions which involve cultivation of axenic microbial strains. Many biosynthetic genes remain silent and are not expressed in vitro thereby seriously limiting the chemical diversity of microbial compounds that can be obtained through fermentation. In contrast to this, co-cultivation (also called mixed fermentation) of two or more different microorganisms tries to mimic the ecological situation where microorganisms always co-exist within complex microbial communities. The competition or antagonism experienced during co-cultivation is shown to lead to a significantly enhanced production of constitutively present compounds and/or to an accumulation of cryptic compounds that are not detected in axenic cultures of the producing strain. This review highlights the power of co-cultivation for increasing the chemical diversity of bacteria and fungi drawing on published studies from the marine and from the terrestrial habitat alike.

A vast majority Chinese herbal medicines (CHM) are traditionally administered as individually prepared water decoctions (tang) which are rather complicated in practice and their dry extracts show technological problems that hamper straight production of more convenient application forms. Modernised extraction procedures may overcome these difficulties but there is lack of clinical evidence supporting their therapeutic equivalence to traditional decoctions and their quality can often not solely be attributed to the single marker compounds that are usually used for chemical extract optimisation. As demonstrated by the example of the rather simple traditional TCM formula Danggui Buxue Tang, both the chemical composition and the biological activity of extracts resulting from traditional water decoction are influenced by details of the extraction procedure and especially involve pharmacokinetic synergism based on co-extraction. Hence, a more detailed knowledge about the traditional extracts’ chemical profiles and their impact on biological activity is desirable in order to allow the development of modernised extracts that factually contain the whole range of compounds relevant for the efficacy of the traditional application. We propose that these compounds can be identified by metabolomics based on comprehensive fingerprint analysis of different extracts with known biological activity. TCM offers a huge variety of traditional products of the same botanical origin but with distinct therapeutic properties, like differentially processed drugs and special daodi qualities. Through this variety, TCM gives an ideal field for the application of metabolomic techniques aiming at the identification of active constituents.

Dihydroaltersolanol B (Ia), dihydroaltersolanol C (Ib), acetylalterporriol D (II) and the atropisomer acetylalterporriol E are isolated from the title fungus.

Four new tetrahydroanthraquinone derivatives, namely, dihydroaltersolanol B (1), dihydroaltersolanol C (2), and the atropisomers acetylalterporriol D (3) and acetylalterporriol E (4), were obtained from the endophytic fungus Stemphylium globuliferum, which was isolated from Juncus acutus growing in Egypt. The structures of the new compounds were unambiguously elucidated on the basis of one- and two-dimensional NMR spectroscopy, as well as by high-resolution mass spectrometry and electronic circular dichroism (ECD) spectroscopy. In addition, seven known anthraquinone derivatives 5–11 were isolated and identified on the basis of their spectral characteristics and by comparison with literature data. Compounds 2, 4–7, 9, and 11 showed strong cytotoxicity against the murine lymphoma cell line L5178Y with IC50 values ranging from 1.25 to 10.4 μM. Compounds 1–4 were also tested for their antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Only 2 exhibited moderate growth inhibition against S. aureus with a minimum inhibitory concentration (MIC) of 49.7 μM.

Until now extrusion is not applied for pharmaceutical encapsulation processes, whereas extrusion is widely used for encapsulation of flavours within food applications. Based on previous mixing studies, a hot melt counter-rotating extrusion process for encapsulation of liquid active pharmaceutical ingredients (APIs) was investigated. The mixing ratio of maltodextrin to sucrose as matrix material was adapted in first extrusion trials. Then the number of die holes was investigated to decrease expansion and agglutination of extrudates to a minimum. At a screw speed of 180 min−1 the product temperature was decreased below 142 °C, resulting in extrudates of cylindrical shape with a crystalline content of 9–16%. Volatile orange terpenes and the nonvolatile α-tocopherol were chosen as model APIs. Design of experiments were performed to investigate the influences of barrel temperature, powder feed rate, and API content on the API retentions. A maximum of 9.2% α-tocopherol was encapsulated, while the orange terpene encapsulation rate decreased to 6.0% due to evaporation after leaving the die. During 12 weeks of storage re-crystallization of sucrose occurred; however, the encapsulated orange terpene amount remained unchanged.

Essential oils and other liquid active pharmaceutical ingredients (APIs) are frequently microencapsulated to improve shelf life, handling, and for tailoring release. A glassy solid solution (GSS), a single-phase system, where the excipient is plasticized by the API, could be an alternative formulation system. Thus this study focuses on the investigation of two formulation strategies using carvacrol as a model compound, namely a microcapsule (MC) and a glassy solid solution (GSS). Applying the solubility parameter approach, polyvinylpyrrolidone (PVP) was chosen as a suitable matrix material for a GSS system, whereas maltodextrin and sucrose served as excipients for a microcapsule (MC) system. Differential scanning calorimetry (DSC) measurements of the excipients’ glass transition temperatures and the melting point of carvacrol verified plasticizing properties of carvacrol on PVP. Batch mixing processes, as preliminary experiments for future extrusion processes, were performed to prepare GSSs and MCs with various amounts of carvacrol, followed by crushing and sieving. Maximally 4.5% carvacrol was encapsulated in the carbohydrate material, whereas up to 16.3% were stabilized as GSS, which is an outstanding amount. However, grinding of the samples led to a loss of up to 30% of carvacrol.

Sponge derived bromotyrosines are a multifaceted class of marine bioactive compounds that are important for the chemical defense of sponges but also for drug discovery programs as well as for technical applications in the field of antifouling constituents. These compounds, which are mainly accumulated by Verongid sponges, exhibit a diverse range of bioactivities including antibiotic, cytotoxic and antifouling effects. In spite of the simple biogenetic building blocks, which consist only of brominated tyrosine and tyramine units, an impressive diversity of different compounds is obtained through different linkages between these precursors and through structural modifications of the side chains and/or aromatic rings resembling strategies that are known from combinatorial chemistry. As examples for bioactive, structurally divergent bromotyrosines psammaplin A, Aplysina alkaloids featuring aerothionin, aeroplysinin-1 and the dienone, and the bastadins, including the synthetically derived hemibastadin congeners, have been selected for this review. Whereas all of these natural products are believed to be involved in the chemical defense of sponges, some of them may also be of particular relevance to drug discovery due to their interaction with specific molecular targets in eukaryotic cells. These targets involve important enzymes and receptors, such as histone deacetylases (HDAC) and DNA methyltransferases (DNMT), which are inhibited by psammaplin A, as well as ryanodine receptors that are targeted by bastadine type compounds. The hemibastadins such as the synthetically derived dibromohemibastadin are of particular interest due to their antifouling activity. For the latter, a phenoloxidase which catalyzes the bioglue formation needed for firm attachment of fouling organisms to a given substrate was identified as a molecular target. The Aplysina alkaloids finally provide a vivid example for dynamic wound induced bioconversions of natural products that generate highly efficient chemical weapons precisely when and where needed.