Search

The severity of global pandemic due to severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has engaged the researchers and clinicians to find the key features triggering the viral infection to lung cells. By utilizing such crucial information, researchers and scientists try to combat the spread of the virus. Here, in this work, we performed in silico analysis of the protein-protein interactions between the receptor-binding domain (RBD) of the viral spike protein and the human angiotensin-converting enzyme 2 (hACE2) receptor to highlight the key alteration that happened from SARS-CoV to SARS-CoV-2. We analyzed and compared the molecular differences between spike proteins of the two viruses using various computational approaches such as binding affinity calculations, computational alanine, and molecular dynamics simulations. The binding affinity calculations showed that SARS-CoV-2 binds a little more firmly to the hACE2 receptor than SARS-CoV. The major finding obtained from molecular dynamics simulations was that the RBD-ACE2 interface is populated with water molecules and interacts strongly with both RBD and ACE2 interfacial residues during the simulation periods. The water-mediated hydrogen bond by the bridge water molecules is crucial for stabilizing the RBD and ACE2 domains. Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) confirmed the presence of vapor and molecular water phases in the protein-protein interfacial domain, further validating the computationally predicted interfacial water molecules. In addition, we examined the role of interfacial water molecules in virus uptake by lung cell A549 by binding and maintaining the RBD/hACE2 complex at varying temperatures using nanourchins coated with spike proteins as pseudoviruses and fluorescence-activated cell sorting (FACS) as a quantitative approach. The structural and dynamical features presented here may serve as a guide for developing new drug molecules, vaccines, or antibodies to combat the COVID-19 pandemic.

A better understanding of the aggregation states of polymers in contact with water is a pivotal issue for the development of highly functional polymer devices that work under water. As a direct experimental method to achieve the above, we used near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) on a poly(methyl methacrylate) (PMMA) film mixed with a small amount of a bottlebrush-type methacrylate polymer with oligo(2-ethyl-2-oxazoline) in its side chain portions, referred to as P[O(Ox)nMA], in a hydrated state. The results showed that P[O(Ox)nMA] was segregated at the surface of the PMMA film and suppressed the adhesion and activation of platelets on the film. Poly[oligo(2-ethyl-2-oxazoline) methacrylate] (P[O(Ox)nMA]) was mixed into a thin film of poly(methyl methacrylate) (PMMA) to construct a bioinert polymer surface in water. Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) revealed that P[O(Ox)nMA] having nitrogen atoms in the side chains was segregated at the outermost region of the PMMA film in a water environment. The extent of the segregation was dependent on the architecture of P[O(Ox)nMA] due to the entropic factor, and greater extent was better for the platelet adhesion and activation.

Seeds are vulnerable to physical and biological stresses during the germination process. Seed priming strategies can alleviate such stresses. Seed priming is a technique of treating and drying seeds prior to germination in order to accelerate the metabolic process of germination. Multiple benefits are offered by seed priming techniques, such as reducing fertilizer use, accelerating seed germination, and inducing systemic resistance in plants, which are both cost-effective and eco-friendly. For seed priming, cold plasma (CP)-mediated priming could be an innovative alternative to synthetic chemical treatments. CP priming is an eco-friendly, safe and economical, yet relatively less explored technique towards the development of seed priming. In this review, we discussed in detail the application of CP technology for seed priming to enhance germination, the quality of seeds, and the production of crops in a sustainable manner. Additionally, the combination treatment of CP with nanoparticle (NP) priming is also discussed. The large numbers of parameters need to be monitored and optimized during CP treatment to achieve the desired priming results. Here, we discussed a new perspective of machine learning for modeling plasma treatment parameters in agriculture for the development of synergistic protocols for different types of seed priming.

X-ray photoelectron spectroscopy (XPS) has become a routine analysis method to determine the chemical composition and bonding states of elements of sample surfaces in many industrial applications, like materials development, failure analysis, quality control and device certification. To obtain significant results the analyses of such samples require a fast analysis with reliable quantification and stable data for repeated experiments. In standard XPS experiments under ultrahigh vacuum (UHV) conditions the significance of the results can be affected by changing surface compositions under the analysis conditions, different degrees of degassing and thus changing degrees of differential charging in insulating samples. In this publication the positive influence of XPS analysis under elevated pressures, often named Near-Ambient Pressure XPS or “Environmental XPS” is shown for different samples. Furthermore the process of charge compensation in gas pressures of 1–2 mbar is introduced, followed by a discussion of the perspectives of this “Environmental Charge Compensation”. The paper discusses the efficiency and stability of Environmental Charge Compensations for typical insulating test samples, as well as for different bulk insulators. The additional capability of XPS in elevated pressures is demonstrated on a superabsorbent polymer typically used in diapers, showing the difference of the analysis results for its wet and dry state. The paper ends with the example of a commercial printed circuit board demonstrating the power of the method for routine analysis of complete devices.

As a group of subject-matter experts in X-ray photoelectron spectroscopy (XPS) and other material characterization techniques from different countries and institutions, we write this document to raise awareness of an epidemic of poor and incorrect materials data analysis in the literature. This issue is a growing problem with many causes and very undesirable consequences. It contributes to what has been called a "reproducibility crisis", which is a recent concern of the U.S. National Academies of Science (Baker,2016; Harris, 2017; NASE&M, 2019).

Near-ambient pressure XPS (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at 2500 Pa or greater. With NAP-XPS, one can analyze moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, the authors show C 1s, O 1s, and survey NAP-XPS spectra from 1,4-polymyrcene. The C 1s and O 1s envelopes are fit with Gaussian–Lorentzian product, asymmetric Lorentzian, and Gaussian–Lorentzian sum functions. Water vapor and argon are used to control sample charging, and the corresponding signals from the gases are present in the survey spectra. The effect of background gas pressure on photoelectron attenuation is illustrated with a sample of polytetrafluoroethylene.

Bacteria are inherently in a hydrated state and therefore not compatible to ultra-high vacuum techniques such as XPS without prior sample preparation involving freeze drying or fast freezing. This has changed with the development of near-ambient pressure (NAP)-XPS, which makes it possible to characterise the bacterial surface with minimal sample preparation. This paper presents NAP-XPS measurements of Escherichia coli under various NAP conditions: at 11 mbar in a humid environment, at 2 mbar after drying in the chamber, pre-dried at 4 mbar, and at 1 mbar after overnight pumping at 10^−4 mbar. The high-resolution spectra of carbon, nitrogen, and oxygen are presented and found to be in general agreement with XPS measurements from freeze-dried and fast-frozen bacteria. However, it was found that the amount of carbon components associated with polysaccharides increases relative to aliphatic carbon during drying and increases further after overnight pumping. This implies that drying has an impact on the bacterial surface.

Near ambient pressure - x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at 2500 Pa or higher. With NAP-XPS, one can analyze moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission we show C 1s, O 1s, and survey NAP-XPS spectra from poly(l-lactic acid). The C 1s and O 1s envelopes were fit with three and two Gaussian-Lorentzian sum functions, respectively. Water vapor (800 Pa) was used as the residual gas for charge compensation, which was confirmed by the sharp peak at 535.0 eV in the O 1s narrow scan. The uniqueness plot corresponding to the C 1s fit shows that the fit parameters had statistical significance. C 1s and O 1s spectra of PLLA damaged by exposure to x-rays for ca. 1 hour are also included.Near ambient pressure - x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at 2500 Pa or higher. With NAP-XPS, one can analyze moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission we show C 1s, O 1s, and survey NAP-XPS spectra from poly(l-lactic acid). The C 1s and O 1s envelopes were fit with three and two Gaussian-Lorentzian sum functions, respectively. Water vapor (800 Pa) was used as the residual gas for charge compensation, which was confirmed by the sharp peak at 535.0 eV in the O 1s narrow scan. The uniqueness plot corresponding to the C 1s fit shows that the fit parameters had statistical significance. C 1s and O 1s spectra of PLLA damaged by exposure to x-rays for ca. 1 hour are also included.

Near ambient pressure-x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. NAP-XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show the survey, Ca 2p, C 1s, O 1s, and N 1s NAP-XPS spectra of two biological samples (cuttlefish bones in their native state and implanted with nitrogen ions), which are materials that would be difficult to analyze by conventional XPS. The measurements were performed at 100 Pa in ambient air to compensate for surface charging. Peak fits of the Ca 2p, C 1s, and N 1s narrow scans are presented.

The lead authors failed to name two collaborators as co-authors. The authors listed should include: Miss Claudia L. Compean-Gonzalez (ORCID: 0000-0002-2367-8450) and Dr. Giacomo Ceccone (ORCID: 0000-0003-4637-0771). These co-authors participated in VAMAS project A27, provided data that were analyzed and presented in this publication (and supporting information), and reviewed the manuscript before submission.

Surface-supported metal-organic frameworks HKUST-1 (Hong Kong University of Science and Technology) were used as a model system for a development of a near ambient pressure (NAP) XPS based approach to investigate interaction with atmospheres of water, methanol or pyridine at pressures ranging from 1 to 4 mbar. The films were grown on a gold substrate functionalized with a COOH-terminated self-assembled monolayer using liquid-phase epitaxy in a step-by-step fashion. Measurement protocols were developed and optimised for different gases in order to obtain spectra of similar quality in terms of signal intensity, noise and shape. Peak shapes were found to depend on the efficiency of charge compensation. Reference measurements in argon proved to be a useful strategy not only for the evaluation of the Cu(II)-fraction in pristine samples, but also to identify the contributions by the respective gas atmosphere to the C 1s and O 1s photoelectron spectra. Reduced copper was found during the exposition of HKUST-1 to water vapour and pyridine, but this effect was not observed in case of methanol. Additionally, it was established that there are no changes in relative Cu(II) percentage with increasing exposure time. This indicates that saturation was reached already at the lowest time of gas exposure. A detailed elucidation of the mechanism of Cu(II) reduction to Cu(I) in HKUST-1 mediated by water and pyridine is part of ongoing work and not in the scope of the present paper.

Near ambient pressure-x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show survey, O 1s/Ag 3p, Ca 3p/Ag 3d, and extended valence band (0–130 eV) NAP-XPS spectra of an ancient Roman coin at three different positions. A small N 1s signal from N2 background gas is also observed. On the obverse side, the coin bears the bust of Licinius I. On the reverse side, it bears the image of Jupiter. The Ag 3d region indicates different amounts of silver at different oxidation states in different positions.

Near ambient pressure-x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this paper, we show the NAP-XPS survey; O 1s, Ca 2p, C 1s, K 2p, Al 2s, Al 2p, Si 2p, and Si 2s narrow scans; and the extended valence band spectrum of clinoptilolite, a natural zeolite that would be difficult to analyze by conventional XPS. A small N 1s signal from N2(g) is also observed in the survey spectrum. Signals in the narrow scans are fit to Gaussian–Lorentzian sum and Gaussian–Lorentzian product functions.

Near-ambient pressure-x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. Here, we show the NAP-XPS analysis of untreated/blank human hair, and human hair that has been colored (red) and treated with a commercial conditioner, or bleached and treated with a different conditioner. Survey spectra are shown of each material along with figures comparing their Si 2p, S 2p, and C 1s spectra. The survey spectrum of untreated hair shows S 2p, S 2s, C 1s, Ca 2p, N 1s, and O 1s peaks and corresponding O, N, and C Auger signals. The survey spectra of the colored and bleached hair show significant Si 2s and Si 2p signals and reduced or eliminated S 2p and S 2s peaks, presumably due to the deposition of dimethicone (polydimethylsiloxane) from the corresponding commercial hair treatment products. Narrow scans similarly indicate the deposition of a silicon-containing material on the two types of treated hair, with a concomitant decrease in the intensity of the sulfur signals from the hair. Upon treatment, the C 1s envelope also changes—the chemically shifted peak attributable to amide-type carbon disappears.

Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. In this study, poly(γ-benzyl l-glutamate) (PBLG) with a molar mass of 11.3 kg/mol was analyzed by NAP-XPS; here, we show the survey, C 1s, N 1s, and O 1s narrow scans of PBLG. The C 1s peak envelope was fitted in three different ways, to five, six, or seven synthetic peaks. In each fit, there was also a shake-up signal. The O 1s narrow scan was well fit with three peaks: C—O and C=O in a 1:2 ratio from the polymer, and a higher energy signal from water vapor. Hartree–Fock orbital energies of a model monomer served as a guide to an additional fit of the C 1s envelope. Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. In this study, poly(γ-benzyl l-glutamate) (PBLG) with a molar mass of 11.3 kg/mol was analyzed by NAP-XPS; here, we show the survey, C 1s, N 1s, and O 1s narrow scans of PBLG. The C 1s peak envelope was fitted in three different ways, to five, six, or seven synthetic peaks. In each fit, there was also a shake-up signal. The O 1s narrow scan was well fit with three peaks: C—O and C=O in a 1:2 ratio from the polymer, and a higher energy signal from water vapor. Hartree–Fock orbital energies of a model monomer served as a guide to an additional fit of the C 1s envelope.

Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less-traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or even higher in some cases. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, the authors show NAP-XPS survey spectra, and C 1s and O 1s narrow scans of two samples of paper (a white office paper and the nonsticky side of a yellow post-it note). The white office paper was analyzed at three specific positions: an unprinted portion, a light blue letter, and a dark blue letter in the “SPECS” logo. Survey spectra show the presence of carbon, oxygen, nitrogen, and calcium in all the samples. The yellow paper shows a small amount of silicon. Fits to the C 1s and O 1s regions are shown. The O 1s narrow scans are fit with four peaks using a literature approach previously employed for paper and with three peaks in a more ad hoc fashion. The latter approach yields better fits. Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less-traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or even higher in some cases. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, the authors show NAP-XPS survey spectra, and C 1s and O 1s narrow scans of two samples of paper (a white office paper and the nonsticky side of a yellow post-it note). The white office paper was analyzed at three specific positions: an unprinted portion, a light blue letter, and a dark blue letter in the “SPECS” logo. Survey spectra show the presence of carbon, oxygen, nitrogen, and calcium in all the samples. The yellow paper shows a small amount of silicon. Fits to the C 1s and O 1s regions are shown. The O 1s narr...

Near ambient pressure-x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or higher in some cases. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show an NAP-XPS survey spectrum, and also O 1s and C 1s narrow scans, of a commercial soft drink, Coca-Cola. Clearly this is a material that could not be analyzed at moderate pressures by conventional XPS. The C 1s narrow scan is fit to five synthetic components. The O 1s narrow scan shows strong contributions from both liquid and gas phase water. A small N 1s signal in the survey spectrum is attributed to background nitrogen. The shape of the uniqueness plot corresponding to the C 1s fit suggests that the fit parameters are statistically significant.

Near ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or higher in some cases. With NAP-XPS, XPS can be used to analyze moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show survey, O 1s, O KLL, and valence band NAP-XPS spectra from liquid water, a material that could not be analyzed at moderate pressures by conventional approaches. The O 1s signal was fit to two components attributed to liquid and vapor phase water. The carbon in the survey spectrum is attributed to contaminants in the water and/or adventitious carbon.

Near-ambient pressure–x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or even higher in some cases. With NAP-XPS, XPS can probe particles, moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show survey, narrow (Zr 3p, Zr 3d, and O 1s), and Auger (O KLL) NAP-XPS scans of ZrO2 particles. Charge compensation for this insulating sample took place via the residual gas in the chamber. Zirconia is an important ceramic material. Accordingly, the XPS spectra of zirconia should be useful references.

Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., greater than 2500 Pa. With NAP-XPS, XPS can be used to probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show O 1s, C 1s, and Ca 2p narrow scans and a survey NAP-XPS spectrum from a human urolith, i.e., a kidney stone, which is a biomaterial that could not be analyzed at moderate pressures by conventional approaches.

In this submission, we show survey, O 1s, and C 1s near ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) spectra from a hard Italian cheese, a material that could not be analyzed by conventional approaches without special sample preparation. The C 1s spectrum is fit under the assumption that the surface of the cheese is primarily fat (triglyceride), which is expected to be the lowest free energy component of the material. The O 1s envelope corresponding to the cheese was well fit to two components of equal area.In this submission, we show survey, O 1s, and C 1s near ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) spectra from a hard Italian cheese, a material that could not be analyzed by conventional approaches without special sample preparation. The C 1s spectrum is fit under the assumption that the surface of the cheese is primarily fat (triglyceride), which is expected to be the lowest free energy component of the material. The O 1s envelope corresponding to the cheese was well fit to two components of equal area.

Near-ambient pressure–x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., greater than 2500 Pa. With NAP-XPS, XPS can analyze moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show survey, 2s, 2p, 3s, 3p, and the Auger LMM NAP-XPS spectra from argon gas, a material that could not be analyzed at moderate pressures by conventional methods. A small N 1s signal from residual nitrogen gas in the chamber is also present in the survey spectrum.Near-ambient pressure–x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., greater than 2500 Pa. With NAP-XPS, XPS can analyze moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show survey, 2s, 2p, 3s, 3p, and the Auger LMM NAP-XPS spectra from argon gas, a material that could not be analyzed at moderate pressures by conventional methods. A small N 1s signal from residual nitrogen gas in the chamber is also present in the survey spectrum.

Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or even higher in some cases. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show NAP-XPS survey and narrow scans from nitrogen gas (N2), a material that could not be analyzed at moderate pressures by conventional approaches. Nitrogen gas is an important reference material for NAP-XPS because residual N2 from the air and/or venting produces an N 1s signal in many NAP-XPS spectra. Nitrogen gas may also be deliberately employed as the gaseous background for NAP-XPS experiments. The survey spectrum of N2 gas contains N 1s, N 2s, N KLL (Auger), and valence band signals. This submission is part of a series of articles on NAP-XPS that has been submitted to Surface Science Spectra. Near-ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at ca. 2500 Pa, or even higher in some cases. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. In this submission, we show NAP-XPS survey and narrow scans from nitrogen gas (N2), a material that could not be analyzed at moderate pressures by conventional approaches. Nitrogen gas is an important reference material for NAP-XPS because residual N2 from the air and/or venting produces an N 1s signal in many NAP-XPS spectra. Nitrogen gas may also be deliberately employed as the gaseous background for NAP-XPS experiments. The survey spectrum of N2 gas contains N 1s, N 2s, N KLL (Auger), and valence band signals. This submission is pa...

Near-ambient pressure–x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. Polytetrafluoroethylene (PTFE) is an important polymer with many applications in science and industry. It is an insulator that charges under x-ray illumination at high vacuum. In this submission, we show NAP-XPS spectra of PTFE. Survey spectra are shown at different background gas (air) pressures. These spectra contain F 2s, C 1s, O 1s, N 1s, F 1s, and F Auger signals. Also presented are F 1s narrow scans over a range of background pressures and illumination times. Peaks decrease in width, shift toward literature values, and improve in shape with increasing background gas pressure.Near-ambient pressure–x-ray photoelectron spectroscopy (NAP-XPS) is a less traditional form of XPS that allows samples to be analyzed at relatively high pressures, i.e., at greater than 2500 Pa. With NAP-XPS, XPS can probe moderately volatile liquids, biological samples, porous materials, and/or polymeric materials that outgas significantly. Polytetrafluoroethylene (PTFE) is an important polymer with many applications in science and industry. It is an insulator that charges under x-ray illumination at high vacuum. In this submission, we show NAP-XPS spectra of PTFE. Survey spectra are shown at different background gas (air) pressures. These spectra contain F 2s, C 1s, O 1s, N 1s, F 1s, and F Auger signals. Also presented are F 1s narrow scans over a range of background pressures and illumination times. Peaks decrease in width, shift toward literature values, and improve in shape with increasing background gas pressure.

Two systems of suspended nanoparticles have been studied with near-ambient pressure x-ray photoelectron spectroscopy: silver nanoparticles in water and strontium fluoride-calcium fluoride core-shell nanoparticles in ethylene glycol. The corresponding dry samples were measured under ultra high vacuum for comparison. The results obtained under near-ambient pressure were overall comparable to those obtained under ultra high vacuum, although measuring silver nanoparticles in water requires a high pass energy and a long acquisition time. A shift towards higher binding energies was found for the silver nanoparticles in aqueous suspension compared to the corresponding dry sample, which can be assigned to a change of surface potential at the water-nanoparticle interface. The shell-thickness of the core-shell nanoparticles was estimated based on simulated spectra from the National Institute of Standards and Technology database for simulation of electron spectra for surface analysis. With the instrumental set-up presented in this paper, nanoparticle suspensions in a suitable container can be directly inserted into the analysis chamber and measured without prior sample preparation.