Search

Introduction: Bronchopulmonary dysplasia (BPD) is a common respiratory morbidity in preterm infants. The onset of pulmonary hypertension leads to worse respiratory outcomes. The contribution of left ventricular diastolic dysfunction in BPD-PH is well reported. We evaluated the serial left ventricular (LV) function and possible ventricular interdependence among BPD-PH., Methods: Single-centre, prospective observational study. Infants <28 weeks of gestation included., Results: 80 infants were enrolled. The incidence of BPD-PH was 23%. The BPD-PH group had a high incidence of hemodynamically significant ductus arteriosus (83% vs 56%,p <0.018), longer oxygen days (96.2±68.1 vs 59.35±52,p< 0.008), and prolonged hospital stay (133.8±46 vs 106.5±38 days,p<0.005). Serial tissue Doppler imaging showed prolonged left ventricle (LV) isovolumetric contraction time (IVCT)(31.05±3.3 vs 26.8±4.4ms,p<0.001), and myocardial performance index (MPI) (0.43±0.03 vs 0.37±0.04,p<0.001) from 33 weeks. The changes in IVCT (35.9±6.7 vs 27.9±4.5ms, p<0.001), isovolumetric relaxation time (IVRT) (50±6.5 vs 39.9±5.8ms,p <0.001), and MPI (0.48±0.05 vs 0.36±0.03,p <0.001) persisted at 36 weeks. The receiver operator characteristic curve showed LV MPI >40 has 83% sensitivity and 65% specificity (AUC 0.77, p<0.001) in the diagnosis of PH. The BPD-PH group had a higher LV E/E' ratio (13.1±4.4 vs 11.4±3.4, p <0.02). Pearson correlation test showed a moderate positive correlation between RV MPI and LV MPI (r= 0.585, p <0.001)., Conclusions: Significant LV diastolic dysfunction was observed in BPD-PH. This is the first study to show biventricular strain and possible ventricular interdependence in BPD-PH. The prolonged LV IVRT and MPI may be a novel echocardiographic indicator of BPD-PH., (S. Karger AG, Basel.)

Objectives: To evaluate serial tissue Doppler cardiac imaging (TDI) in the evolution of bronchopulmonary dysplasia-associated pulmonary hypertension (BPD-PH) among extremely preterm infants., Design: Prospective observational study., Setting: Single-center, tertiary-level neonatal intensive care unit., Patients: Infant born <28 weeks gestation., Main Outcome Measures: Utility of TDI in the early diagnosis and prediction of BPD-PH and optimal timing for screening of BPD-PH., Results: A total of 79 infants were included. Of them, 17 (23%) had BPD-PH. The mean gestational age was 25.9 ± 1.1 weeks, and mean birth weight was 830 ± 174 g. The BPD-PH group had a high incidence of hemodynamically significant patent ductus arteriosus (83% vs. 56%, p  < 0.018), longer oxygen days (96.16 ± 68.09 vs. 59.35 ± 52.1, p  < 0.008), and prolonged hospital stay (133.8 ± 45.9 vs. 106.5 ± 37.9 days, p  < 0.005). The left ventricular eccentricity index (0.99 ± 0.1 vs. 1.1 ± 0.7, p  < 0.01) and the ratio of acceleration time to right ventricular ejection time showed a statistically significant trend from 33 weeks (0.24 ± 0.05 vs. 0.28 ± 0.05, p  < 0.05). At 33 weeks, the BPD-PH group showed prolonged isovolumetric contraction time (27.84 ± 5.5 vs. 22.77 ± 4, p  < 0.001), prolonged isovolumetric relaxation time (40.3 ± 7.1 vs. 34.9 ± 5.3, p  < 0.003), and abnormal myocardial performance index (0.39 ± 0.05 vs. 0.32 ± 0.03, p  < 0.001). These differences persisted at 36 weeks after conceptional gestational age., Conclusions: TDI parameters are sensitive in the early evolution of BPD-PH. Diagnostic accuracy can be increased by combining the TDI parameters with conventional echocardiographic parameters. BPD-PH can be recognizable as early as 33-34 weeks of gestation., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (© 2024 Gopagondanahalli, Abdul Haium, Vora, Sundararaghavan, Ng, Choo, Ang, Binte Mohamad Taib, Wijedasa, Rajadurai, Yeo and Tan.)

Bioelectrochemical sensors for environment monitoring have the potential to provide facility operators with real-time data, allowing for better and more timely decision-making regarding water and wastewater treatment. To assess the robustness and sensitivity of the Sentry™ biosensor in local conditions, it was tested in Malaysia using domestically available wastewater. The study objectives included (1) enrich the biosensor locally, (2) operate and test the biosensor with local domestic wastewater, and (3) determine the biosensor's responsiveness to model pollutants through pollutant spike and immersion test as well as response to absence of wastewater. Lab-scale operation shows the biosensor was successfully enriched with (1) local University Kebangsaan Malaysia's, microbial community strain collection and (2) local municipal wastewater microflora, operated for more than 50 days with a stable yet responsive carbon consumption rate (CCR) signal. Meanwhile, two independent biosensors were also enriched and operated in Indah Water Research Centre's crude sewage holding tank, showing a stable response to the wastewater. Next, a pilot scale setup was constructed to test the enriched biosensors for the spiked-pollutant test. The biosensors showed a proportional CCR response (pollutant presence detected) towards several organic compounds in the sewage, including ethanol, chicken blood, and dilution of tested sewage but less to curry powder, methanol, and isopropanol. Conversely, there was no significant response (pollutant presence not detected) towards hexane, Congo red, engine oil, and paint, which may be due to their non-biodegradability and/or insoluble nature. Additionally, the biosensors were exposed to air for 6 h to assess their robustness towards aerobic shock with a positive result. Overall, the study suggested that the biosensor could be a powerful monitoring tool, given its responsiveness towards organic compounds in sewage under normal conditions., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Electrogenic microorganisms serve as important biocatalysts for microbial electrochemical sensors (MESes). The electrical signal produced is based on the rate of electron transfer between the microbes and electrodes, which represents the biotoxicity of water. However, existing MESes require complex and sophisticated fabrication methods. Here, several low-cost and rapid surface modification strategies (carbon powder-coated, flame-oxidized, and acid-bleached) have been demonstrated and studied for biosensing purposes. Surface-modified MESe bioanodes were successfully applied to detect multiple model pollutants including sodium acetate, ethanol, thinner, and palm oil mill effluent under three different testing sequences, namely, pollutant incremental, pollutant dumping, and water dilution tests. The carbon powder-coated bioanode showed the most responsive signal profile for all the three tests, which is in line with the average roughness values ( R a ) when tested with atomic force microscopy. The carbon powder-coated electrode possessed a R a value of 0.844, while flame-oxidized, acid-bleached, and control samples recorded 0.323, 0.336, and 0.264, respectively. The higher roughness was caused by the carbon coating and provided adhesive sites for microbial attachment and growth. The accuracy of MESe was also verified by correlating with chemical oxygen demand (COD) results. Similar to the sensitivity test, the carbon powder-coated bioanode obtained the highest R 2 value of 0.9754 when correlated with COD results, indicating a high potential of replacing conventional water quality analysis methods. The reported work is of great significance to showcase facile surface modification techniques for MESes, which are cost-effective and sustainable while retaining the biocompatibility toward the microbial community with carbon-based coatings.

Sugar molasses from agricultural waste could be a sustainable carbon source for the synthesis of graphene adsorbent introduced in this work. The sugar molasses was successfully converted to graphene-like material and subsequently coated on the sand as graphene sand composite (GSC), as proven by XRD, XPS, Raman spectroscopy, and SEM with EDX mapping analyses. The adsorption performance of GSC was evaluated against the removal of Tetracycline (TC) and methylene blue (MB) pollutants from an aqueous solution in a fixed bed column continuous-flow adsorption setup. The effect of different process conditions: bed height (4-12 cm), influent flow rate (3-7 mL/min), and contaminants' concentration (50-150 ppm) was investigated. The results revealed that column performance was improved by increasing the bed depth and lowering the flow rate and concentration of the pollutants. The best removal efficiency was obtained when the bed height was 12 cm, the influent flow rate of 3 mL/min, and the pollutants' initial concentration was 50 mg/L. Thomas, Adams-Bohart, and Yoon-Nelson models were attempted to fit the breakthrough curves. Regeneration of the GSC indicated the decline of breakthrough time from 240-280 to 180 min, reflecting the decrease in adsorptive sites due to the incomplete regeneration process. Overall, sugar molasses was shown to be a low-cost precursor for synthesizing valuable graphene material in the form of GSC, which can reduce the problem for industrial waste management of sugar molasses, and the GSC could be used as an adsorbent for environmental application., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Tanning and other leather processing methods utilize a large amount of freshwater, dyes, chemicals, and salts and produce toxic waste, raising questions regarding their environmental sensitivity and eco-friendly nature. Total suspended solids, total dissolved solids, chemical oxygen demand, and ions such as chromium, sulfate, and chloride turn tannery wastewater exceedingly toxic for any living species. Therefore, it is imperative to treat tannery effluent, and existing plants must be examined and upgraded to keep up with recent technological developments. Different conventional techniques to treat tannery wastewater have been reported based on their pollutant removal efficiencies, advantages, and disadvantages. Research on photo-assisted catalyst-enhanced deterioration has inferred that both homogeneous and heterogeneous catalysis can be established as green initiatives, the latter being more efficient at degrading organic pollutants. However, the scientific community experiences significant problems developing a feasible treatment technique owing to the long degradation times and low removal efficiency. Hence, there is a chance for an improved solution to the problem of treating tannery wastewater through the development of a hybrid technology that uses flocculation as the primary treatment, a unique integrated photo-catalyst in a precision-designed reactor as the secondary method, and finally, membrane-based tertiary treatment to recover the spent catalyst and reclaimable water. This review gives an understanding of the progressive advancement of a cutting-edge membrane-based system for the management of tanning industrial waste effluents towards the reclamation of clean water. Adaptable routes toward sludge disposal and the reviews on techno-economic assessments have been shown in detail, strengthening the scale-up confidence for implementing such innovative hybrid systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Decorating nanomaterials on graphene oxide (GO) can enhance its adsorption capacity and removal efficiency of water pollutants. In this study, for the first time, nano-sized polylactic acid (PLA) has been successfully decorated on the surface of GO through a facile synthesis approach. The adsorptive efficiency of GO-PLA for removing methylene blue (MB) and tetracycline (TC) from an aqueous solution was examined. The characterization confirmed the successful decoration of PLA on GO nanosheets with the nano size of PLA. It was hypothesized that the PLA was decorated on the surface of GO through covalent bonding between oxygen-containing functional groups and lactide molecules. The optimum adsorption parameters determined were at the adsorbent dose of 0.5 g L -1 , pH 4, contact time of 120 min, and temperature of 318 K. The pseudo-second-order kinetic model described the contaminants' adsorption behaviour, and the intraparticle diffusion model revealed that both surface adsorption and intraparticle diffusion controlled the adsorption process. Langmuir isotherm model best described the adsorption behaviour of the pollutants on GO-PLA and demonstrated the maximum monolayer uptake capacities of MB (332.5 mg g -1 ) and TC (223.7 mg g -1 ). The adsorption results indicated that the uptake capacities of GO-PLA in comparison to GO have increased by approximately 70% and 110% for MB and TC, respectively. These observations reflect the remarkable role of nano-sized PLA that enhanced the adsorption capacity due to its additional functional group and larger surface area., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The use of chitosan as a flocculant has become a topic of interest over the years due to its positively charged polymer and biodegradable and non-toxic properties. However, most studies only focus on microalgae and wastewater treatment. This study provides crucial insight into the potential of using chitosan as an organic flocculant to harvest lipids and docosahexaenoic acid (DHA-rich Aurantiochytrium sp. SW1 cells by examining the correlation of flocculation parameters (chitosan concentration, molecular weight, medium pH, culture age, and cell density) toward the flocculation efficiency and zeta potential of the cells. A strong correlation between the pH and harvesting efficiency was observed as the pH increased from 3, with the optimal flocculation efficiency of >95% achieved at a chitosan concentration of 0.5 g/L at pH 6 where the zeta potential was almost zero (3.26 mV). The culture age and chitosan molecular weight have no effect on the flocculation efficiency but increasing the cell density decreases the flocculation efficiency. This is the first study to reveal the potential of chitosan to be used as a harvesting alternative for thraustochytrid cells.

Waste cooking oil (WCO) appears to be a potential carbonaceous source for synthesizing graphene sand composite (GSC) adsorbent in removing pollutants. This study presents a green synthesis method of GSC using WCO as a sustainable carbon source for the synthesis of GSC through the thermal graphitization method. Characterization analysis conducted on GSC WCO verified the successful coating of WCO onto the sand surface and conversion to graphene, which possessed distinct functional groups and features of graphene materials. GSC WCO adsorbent effectiveness in removing Congo Red dye through batch adsorption was studied under the influence of different initial concentrations (20 to 100 mg/L), and the optimum pH (pH 2 to 10), contact time (5 to 240 min), and temperature (25 to 45 °C) were investigated. The GSC WCO showed removal rates of 91.5% achieved at an initial dye concentration of 20 mg L -1 , 1.0 g of adsorbent dosage, a temperature of 25 °C, and 150 min of contact time. The GSC WCO exhibited a maximum capacity of 5.52 mg g -1 , was well-fitted to the Freundlich isotherm model with an R 2 value of 0.989 and had an adsorption mechanism that followed the pseudo-second-order kinetic model. Negative values of enthalpy (ΔH) and Gibbs free energy (ΔG) revealed that CR adsorption onto GSC WCO was a spontaneous and exothermic process. The presence of functional groups on the surface of GSC WCO with such interactions (π-π attractive forces, hydrophobic forces, and hydrogen bonding) was responsible for the anionic dye removal. Regeneration of GSC WCO adsorbent declined after four cycles, possibly due to the chemisorption of dyes with GSC that resulted in inefficient adsorption. Being a waste-to-wealth product, GSC WCO possessed great potential to be used for water treatment and simultaneously benefited the environment through the effort to reduce the excessive discharge of WCO., (© 2023. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.)

Freshwater deficiency has become a significant issue affecting many nations' social and economic development because of the fast-growing demand for water resources. Nanofiltration (NF) is one of the promising technologies for water reclamation application, particularly in desalination, water, and wastewater treatment fields. Nevertheless, membrane fouling remains a significant concern since it can reduce the NF membrane performance and increase operating expenses. Consequently, numerous studies have focused on improving the NF membrane's resistance to fouling. This review highlights the recent progress in NF modification strategies using three types of antifouling modifiers, i.e., nanoparticles, polymers, and composite polymer/nanoparticles. The correlation between antifouling performance and membrane properties such as hydrophilicity, surface chemistry, surface charge, and morphology are discussed. The challenges and perspectives regarding antifouling modifiers and modification strategies conclude this review.

In this study, the impact of urine diversion on the treatment capacity, treatment process, and capital costs of a decentralised wastewater treatment plant (WWTP) was simulated using BioWin. The data for simulation including for economic analysis were obtained from a real decentralised WWTP at Sydney. Simulation was conducted for two alternative process design scenarios of a WWTP: membrane bioreactor (MBR) without denitrification and anaerobic MBR in place of aerobic MBR and compared to existing process design. The simulation shows that with about 75% urine diversion (through source separation), the treatment capacity of the existing WWTP can be doubled although above 40% urine diversion, the impact appears less rapid. When the urine diversion exceeds 75%, it was found that the anoxic tank for biological denitrification becomes redundant and the current wastewater treatment process could be replaced with a simpler and much less aeration intensive membrane bioreactor (MBR) producing similar effluent quality with a 24% reduction in capital expenditure (footprint) cost. Anaerobic MBR can be a potential alternative to aerobic MBR although pre-treatment becomes essential before reverse osmosis treatment for water reuse applications. Sensitivity analysis has revealed that by operating the bioreactor at higher mixed liquor suspended solids concentrations (9 g/L instead of 5 g/L) could help increase the WWTP treatment capacity by about 3.5 times at 75% urine diversion. Hence, urine diversion (until nitrogen-limiting conditions occur above 75% urine diversion) can increase the treatment capacity of an existing WWTP and reduce the capital expenses due to reduced plant footprint., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Electrochemical polymerase chain reaction (PCR) represents a valid alternative to the optical-based PCR due to reduced costs of signaling labels, use of simpler instrumentation, and possibility of miniaturization and portability of the systems, which can facilitate decentralized detection. The high intrinsic electroactivity and strong linear relationship between the material concentration and its redox signal suggest a possible use of oxidized nanocarbon materials as electroactive tags for PCR. Herein, we compared three different nanographene oxide materials namely nGO-1, nGO-2 and nGO-3 as signaling tags for the detection of genetically modified organisms (GMO) by electrochemical PCR. The three materials differ in size, chemical composition as well as type and amount of oxygen functionalities verified by extensive characterization with X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), transmission electron microscopy (TEM) and electrochemical methods. A sense primer sequence belonging to the Cauliflower Mosaic Virus 35S promoter (a common genetic marker for GMO screening) was used to conjugate to the nanocarbon materials by carbodiimide chemistry before PCR amplification with a biotinylated antisense strand. Finally, the amplified electroactive PCR product was detected, where the reduction signal derived from the electrochemically reducible oxygenated functionalities on the nanocarbon material surface was directly correlated to the presence of GMO. Overall, we were able to correlate the different material characteristics with their performance as electroactive labels and identify the nanocarbon material that exhibits the highest potential to be used as innovative electroactive label for PCR in the amplification and detection of the selected target sequence., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The present work demonstrates the coupling of titanium dioxide, TiO 2 nanoparticles (TNP) with N-doped, Bi-doped, and N-Bi co-doped rice husk-derived carbon dots (CDs) via a facile dispersion method, forming respective photocatalyst composites of CDs/TNP, N-CDs/TNP, Bi-CDs/TNP and N-Bi-CDs/TNP. Characterization analyzes verified the successful incorporation of respective CDs samples into TNP, forming photocatalyst composite with narrowed band gap and quenched photoluminescence intensity. Photocatalytic activity of TNP and the respective composites was investigated for photodegradation of diclofenac (DCF) under both simulated sunlight and natural sunlight irradiation. The as-prepared N-Bi-CDs/TNP composite showed the best photocatalytic performance among all composites, able to completely degrade 5 ppm of DCF within 60 min and 180 min under both types of visible light irradiation, respectively. The N-Bi-CDs/TNP composite also showed a TOC removal efficiency up to 87.63%. N-Bi-CDs, worked as photosensitizer and electron reservoir, contributed to the outstanding photocatalytic activity of N-Bi-CDs/TNP, whereby the recombination was prolonged and light absorption was shifted towards the visible light region. Furthermore, the composite of N-Bi-CDs/TNP also demonstrated good stability and reusability over repeated degradation cycles. The photodegradation of DCF resulted into several intermediates, which were identified from LC-MS analysis. The present work could provide an insight on the application of heteroatoms doped and co-doped carbon dots in semiconductor oxide as high performance photocatalysts., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

We show here how the electrochemical reduction signal of graphene oxide nanocolloids is inhibited upon the formation of non-covalent interactions with single stranded DNA oligonucleotides. The drop in the reduction current intensity is strongly influenced by the nucleobase sequence, and can therefore be directly correlated to the specific DNA homo-oligonucleotide.

In this study, hematite graphene oxide (αFe 2 O 3 -GO) powder nanocomposites and thin-film hematite graphene oxide (αFe 2 O 3 -GO) were synthesized for application in the removal of Rhodamine B (RhB) from textile wastewater. αFe 2 O 3 -GO nanomaterials were placed onto the FTO substrate to form a thin layer of nanocomposites. Different analysis including XRD, FTIR, Raman spectra, XPS, and FESEM were done to analyze the morphology, structure, and properties of the synthesized composites as well as the chemical interactions of αFe 2 O 3 with GO. The photocatalytic performance of two synthesized composites was compared with different concentrations of αFe 2 O 3 -GO. The results showed that powder nanocomposites are more effective than thin-film composites for the removal of RhB dye. αFe 2 O 3 -GO-5% powder nanocomposites removed over 64% of dye while thin-film nanocomposites had less removal efficiencies with just under 47% removal rate. The reusability test was done for both materials in which αFe 2 O 3 -GO-5% powder nanocomposites removed a higher rate of dye (up to 63%) in more cycles (6 cycles)., (© 2021. The Author(s).)

Fertilizer-drawn forward osmosis (FDFO) is a potential alternative to recover and reuse water and nutrients from agricultural wastewater, such as palm oil mill effluent that consists of 95% water and is rich in nutrients. This study investigated the potential of commercial fertilizers as draw solution (DS) in FDFO to treat anaerobic palm oil mill effluent (An-POME). The process parameters affecting FO were studied and optimized, which were then applied to fertilizer selection based on FO performance and fouling propensity. Six commonly used fertilizers were screened and assessed in terms of pure water flux (J w ) and reverse salt flux (J S ). Ammonium sulfate ((NH 4 ) 2 SO 4 ), mono-ammonium phosphate (MAP), and potassium chloride (KCl) were further evaluated with An-POME. MAP showed the best performance against An-POME, with a high average water flux, low flux decline, the highest performance ratio (PR), and highest water recovery of 5.9% for a 4-h operation. In a 24-h fouling run, the average flux decline and water recovered were 84% and 15%, respectively. Both hydraulic flushing and osmotic backwashing cleaning were able to effectively restore the water flux. The results demonstrated that FDFO using commercial fertilizers has the potential for the treatment of An-POME for water recovery. Nevertheless, further investigation is needed to address challenges such as J S and the dilution factor of DS for direct use of fertigation.

Background: Anthracyclines are widely used to treat childhood cancers; however, they cause cardiotoxicity. To address the paucity of clinical data from Asian populations, this study investigated the epidemiology of pediatric anthracycline-induced cardiotoxicity, during and after chemotherapy, in a multiethnic Asian population. Procedure: This was a single-center, retrospective analysis of 458 anthracycline-treated pediatric oncology patients at KK Women's and Children's Hospital, a tertiary children's hospital in Singapore from 2005 through 2015. We investigated cardiotoxicity (defined as left ventricular fractional shortening <28% on echocardiography) and its risk factors using univariate logistic regression as well as survival estimates through the Kaplan-Meier method to compare survival distribution between patients with and without cardiotoxicity. Results: Over a follow-up period of almost 4 years, we found that 7% (32/458) of the cohort developed cardiotoxicity, with 37.5% (12/32) of these manifesting as clinical heart failure, whilst the rest were asymptomatic. The cardiotoxic cohort demonstrated a significantly higher mortality rate compared to the non-cardiotoxic group at 46.9 vs. 19.2% ( p < 0.001), of whom 3 (9.4%) died from end-stage heart failure. We found that traditional predictors such as female sex, age at diagnosis, and cumulative doxorubicin equivalent dose were not predictors of cardiotoxicity. Conclusion: Our study reaffirms that freedom from symptoms does not ensure normal heart function and suggests that children with abnormal ventricular systolic function have higher mortality risk compared to those with normal systolic function. The findings contribute to improved understanding of the Asian burden to aid development of measures to prevent or reduce the risk of cardiotoxicity., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Tan, Chan, Ang, Mya, Chan and Chen.)

The interest of the scientific community for 2D graphene analogues has been recently focused on 2D-Xene materials from Group 14. Among them, germanene and its derivatives have shown great potential because of their large bandgap and easily tuneable electronic and optical properties. With the latter having been already explored, the use of chemically modified germanenes for optical bio-recognition is yet to be investigated. Herein, we have synthesized two germanene materials with different surface ligands namely hydrogenated germanene (Ge-H) and methylated germanene (Ge-Me) and used them as an optical platform for the label-free biorecognition of Ochratoxin A (OTA), a highly carcinogenic food contaminant. It was discovered that firstly the surface ligands on chemically modified germanenes have strong influence on the intrinsic fluorescence of the material; secondly they also highly affect both the bio-conjugation ability and the bio-recognition efficiency of the material towards the detection of the analyte. An improved calibration sensitivity, together with superior reproducibility and linearity of response, was obtained with a methylated germanene (Ge-Me) material, indicating also the better suitability of the latter for real sample analysis. Such research is highly beneficial for the development and optimization of 2D material based optical platforms for fast and cost-effective bioassays.

In the present work, palm kernel shell (PKS) biomass waste has been used as a low-cost and easily available precursor to prepare carbon dots (CDs) via microwave irradiation method. The impacts of the reacting medium: water and diethylene glycol (DEG), and irradiation period, as well as the presence of chitosan on the CDs properties, have been investigated. The synthesized CDs were characterized by several physical and optical analyses. The performance of the CDs in terms of bacteria cell imaging and copper (II) ions sensing and removal were also explored. All the CDs possessed a size of 6-7 nm in diameter and the presence of hydroxyl and alkene functional groups indicated the successful transformation of PKS into CDs with carbon core consisting of C = C elementary unit. The highest quantum yield (44.0%) obtained was from the CDs synthesised with DEG as the reacting medium at irradiation period of 1 min. It was postulated that the high boiling point of DEG resulted in a complete carbonisation of PKS into CDs. Subsequently, the absorbance intensity and photoluminescence intensity were also much higher compared to other precursor formulation. All the CDs fluoresced in the bacteria culture, and fluorescence quenching occurred in the presence of heavy metal ions. These showed the potential of CDs synthesised from PKS could be used for cellular imaging and detection as well as removal of heavy metal ions.

Graphene oxide is a very high capacity adsorbent due to its functional groups and π-π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic effects through the use of mixed-matrix composite. In this study, silica-decorated graphene oxide (SGO) was used as a high-efficiency adsorbent to remove Congo red (CR) and Cadmium (II) from aqueous solutions. The effects of solution initial concentration (20 to 120 mg/l), solution pH (pH 2 to 7), adsorption duration (0 to 140 min) and temperature (298 to 323 K) were measured in order to optimize the adsorption conditions using the SGO adsorbent. Morphological analysis indicated that the silica nanoparticles could be dispersed uniformly on the graphene oxide surfaces. The maximum capacities of adsorbent for effective removal of Cd (II) and CR were 43.45 and 333.33 mg/g based on Freundlich and Langmuir isotherms, respectively. Langmuir and Freundlich isotherms displayed the highest values of Q max for CR and Cd (II) adsorption in this study, which indicated monolayer adsorption of CR and multilayer adsorption of Cd (II) onto the SGO, respectively. Thermodynamic study showed that the enthalpy (ΔH) and Gibbs free energy(ΔG) values of the adsorption process for both pollutants were negative, suggesting that the process was spontaneous and exothermic in nature. This study showed active sites of SGO (π-π, hydroxyl, carboxyl, ketone, silane-based functional groups) contributed to an enormous enhancement in simultaneous removal of CR and Cd (II) from an aqueous solution, Therefore, SGO can be considered as a promising adsorbent for future water pollution control and removal of hazardous materials from aqueous solutions., (Copyright © 2020. Published by Elsevier B.V.)

Study of forward osmosis (FO) has been increasing steadily over recent years with applications mainly focusing on desalination and wastewater treatment processes. The working mechanism of FO lies in the natural movement of water between two streams with different osmotic pressure, which makes it useful in concentrating or diluting solutions. FO has rarely been operated as a stand-alone process. Instead, FO processes often appear in a hybrid or integrated form where FO is combined with other treatment technologies to achieve better overall process performance and cost savings. This article aims to provide a comprehensive review on the need for hybridization/integration for FO membrane processes, with emphasis given to process enhancement, draw solution regeneration, and pretreatment for FO fouling mitigation. In general, integrated/hybrid FO processes can reduce the membrane fouling propensity; prepare the solution suitable for subsequent value-added uses and production of renewable energy; lower the costs associated with energy consumption; enhance the quality of treated water; and enable the continuous operation of FO through the regeneration of draw solution. The future potential of FO lies in the success of how it can be hybridized or integrated with other technologies to minimize its own shortcomings, while enhancing the overall performance., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Graphene oxide (GO) has gained popularity in scientific research and industry due to its superior properties, which can be controlled by the synthesis method and graphite feedstock. Despite the availability of different graphite sources, most of the reported studies used natural graphite flake (NGF) as a source of oxidation for GO synthesis. The effect of various alternative graphite feedstocks on the GO properties has not been investigated systematically. This study investigated the influence of graphite feedstock (natural and synthetic) on the characteristics and properties of GO via modified Hummer's method. Natural graphite flake (NGF), natural graphite powder (NGP), and synthetic graphite powder (SGP) were used as graphite feedstock in the study. Energy-dispersive X-ray analysis revealed that the GO produced using NGP (NGP-GO) has higher oxygen to carbon ratio in comparison to GO made from NGF (NGF-GO) and GO made from SGP (SGP-GO) (35.4, 32.7, and 32.2%, respectively), indicating higher oxidation degree for NGP-GO. Zeta potential analysis for NGP-GO, NGF-GO and SGP-GO were -47.8, -42.6 and -39.4 mV, respectively. Morphological analysis revealed that the structures of GO varied according to graphite feedstock, in which (NGP-GO) and (NGF-GO) were highly exfoliated (single-layered structure) while (SGP-GO) showed a multi-layered structure. Further testing was conducted by decorating silver (Ag) nanoparticles on the GO. The results showed that Ag could be uniformly decorated (no agglomeration) on the surface of GO-NGP, due to the presence of more functional groups. Subsequently, the antimicrobial property of Ag-NGP was the highest with an inhibition diameter of 14.7 ± 1.2 mm (30% higher than the other samples). In conclusion, the properties of GO can be tuned by selecting the suitable graphite feedstock and this might pave the way to new developments in the GO-based applications., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Graphene quantum dots (GQDs) are used here as a biosensing platform for the recognition of the major food contaminant ochratoxin A (OTA), with a fluorescently labelled DNA aptamer (FAM OTA aptamer) functioning as the biorecognition element. The detection principle lies in the formation of noncovalent interactions between the FAM OTA aptamer and the GQD surface, and the consequent fluorescence quenching. The further change in the fluorescence signal, induced by the formation of the FAM OTA Aptamer/OTA conjugate during the detection step, could then be correlated to the presence and concentration of the target analyte. Upon tuning the concentration of GQDs, a switch in the biorecognition mechanism occurred. Specifically, while a lower GQD concentration (0.060 mg/mL) resulted in a restoration of the fluorescence intensity upon incubation with OTA, a higher GQD concentration (0.150 mg/mL) provided a further quenching of the final fluorescence intensity. Upon further calibration study, it was discovered that the latter mechanism provided a better option in terms of linearity of response, detection limit and selectivity., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Nanomaterials can be incorporated in the synthesis of membrane to obtain mixed-matrix membrane with marked improvement in properties and performance. However, stability and dispersion of the nanomaterials in the membrane matrix, as well as the need to use high ratio of nanomaterials for obvious improvement of membrane properties, remain a major hurdle for commercialization. Hence, this study aims to investigate the improvement of polyamide 6,6 membrane properties with the incorporation of silver nanoparticles decorated on graphene oxide (Ag-GO) nanoplates and at the same time focus is given to the issues above. Graphene oxide nanoplates were synthesized using the modified Hummers' method and decorated with silver before embedded into the polyamide 6,6 matrix. Physicochemical characterizations were conducted on both nanoplates and the mixed-matrix Ag-GO polyamide 6,6 membrane. The issues of Ag agglomeration and leaching were not observed, which could be attributed to the decoration of Ag on GO that helped to disperse the nanomaterials and provided a better anchor point for the attachment of Ag nanoparticles. The synthesized membrane showed marked improvement regarding flux (135% increment) and antifouling (40% lower irreversible fouling), which could be ascribed to the more negative charge of membrane surface (-14 ± 6 to -31 ± 3.8 mV) and hydrophilicity (46% enhancement) of the membranes. With minimal embedment of Ag nanoparticles, the membrane showed superior antibacterial property where the E. coli bacteria could not form a single colony on the membrane surface. Overall, the decoration of Ag on GO nanoplates could be a promising approach to resolve the agglomeration and leaching issues as well as reduce the amount of precious Ag in the synthesis of Ag-GO polyamide 6,6 membrane.