Search

Irradiation at 460 nm of [Mo3(μ3-S)(μ2-S2)3(S2CNR2)3]I ([2a]I, R = Me; [2b]I, R = Et; [2c]I, R = iBu; [2d]I, R = CH2C6H5) in a mixed aqueous-polar organic medium with [Ru(bipy)3]2+ as photosensitizer and Et3N as electron donor leads to H2 evolution. Maximum activity (300 turnovers, 3 h) is found with R = iBu in 1:9 H2O:MeCN; diminished activity is attributed to deterioration of [Ru(bipy)3]2+. Monitoring of the photolysis mixture by mass spectrometry suggests transformation of [Mo3(μ3-S)(μ2-S2)3(S2CNR2)3]+ to [Mo3(μ3-S)(μ2-S)3(S2CNR2)3]+ via extrusion of sulfur on a time scale of minutes without accumulation of the intermediate [Mo3S6(S2CNR2)3]+ or [Mo3S5(S2CNR2)3]+ species. Deliberate preparation of [Mo3S4(S2CNEt2)3]+ ([3]+) and treatment with Et2NCS21- yields [Mo3S4(S2CNEt2)4] (4), where the fourth dithiocarbamate ligand bridges one edge of the Mo3 triangle. Photolysis of 4 leads to H2 evolution but at ∼25% the level observed for [Mo3S7(S2CNEt2)3]+. Early time monitoring of the photolyses shows that [Mo3S4(S2CNEt2)4] evolves H2 immediately and at constant rate, while [Mo3S7(S2CNEt2)3]+ shows a distinctive incubation prior to a more rapid H2 evolution rate. This observation implies the operation of catalysts of different identity in the two cases. Photolysis solutions of [Mo3S7(S2CNiBu2)3]+ left undisturbed over 24 h deposit the asymmetric Mo6 cluster [(iBu2NCS2)3(μ2-S2)2(μ3-S)Mo3](μ3-S)(μ3-η2,η1-S',η1-S″-S2)[Mo3(μ2-S)3(μ3-S)(S2CNiBu2)2(μ2-S2CNiBu2)] in crystalline form, suggesting that species with this hexametallic composition and core topology are the probable H2-evolving catalysts in photolyses beginning with [Mo3S7(S2CNR2)3]+. When used as solvent, N,N-dimethylformamide (DMF) suppresses H2-evolution but to a greater degree for [Mo3S4(S2CNEt2)4] than for [Mo3S7(S2CNEt2)3]+. Recrystallization of [Mo3S4(S2CNEt2)4] from DMF affords [Mo3S4(S2CNEt2)4(η1,κO-DMF)] (5), implying that inhibition by DMF arises from competition for a Mo coordination site that is requisite for H2 evolution. Computational assessment of [Mo3S4(S2CNMe2)3]+ following addition of 2H+ and 2e- suggests a Mo(H)-μ2(SH) intermediate as the lowest energy species for H2 elimination. An analogous pathway may be available to the Mo6 cluster via dissociation of one end of the μ2-S2CNR2 ligand, a known hemilabile ligand type, in the [Mo3S4]4+ fragment.

A simple and environmentally friendly approach toward the thermoplastic processing of rapidly degradable plastic-enzyme composites using three-dimensional (3D) printing techniques is described. Polycaprolactone/Amano lipase (PCL/AL) composite films (10 mm × 10 mm; height [h] = ∼400 μm) with an AL loading of 0.1, 1.0, and 5.0% were prepared via 3D printing techniques that entail direct mixing in the solid state and thermal layer-by-layer extrusion. It was found that AL can tolerate in situ processing temperatures up to 130 °C in the solid-state for 60 min without loss of enzymatic activity. The composites were degraded in phosphate buffer (8 mg/mL, composite to buffer) for 7 days at 37 °C and the resulting average percent total weight loss (WLₐᵥg %) was found to be 5.2, 92.9, and 100%, for the 0.1, 1.0, and 5.0% films, respectively. The degradation rates of PCL/AL composites were found to be faster than AL applied externally in the buffer. Thicker PCL/AL 1.0% films (10 mm × 10 mm; h = ∼500 μm) were also degraded over a 7 day period to examine how the weight loss occurs over time with 3.0, 18.1, 36.4, 46.4, and 70.2% weight loss for days 1, 2, 3, 4, and 7, respectively. Differential scanning calorimetry (DSC) analysis shows that the film’s percent crystallinity (Dₓₜₐₗ%) increases over time with Dₓₜₐₗ% = 46.5 for day 0 and 53.1% for day 7. Scanning electron microscopy (SEM) analysis found that film erosion begins at the surface and that water can penetrate the interior via surface pores activating the enzymes embedded in the film. Controlled release experiments utilizing dye-loaded PCL/AL/dye (AL = 1.0%; dye = 0.1%) composites were degraded over a 7 day period with the bulk of the dye released by the fourth day. The PCL/AL multimaterial objects containing AL-resistant polylactic acid (PLA) were also printed and degraded to demonstrate the application of this material on more complex structures.

The efficient synthesis of well-defined, linear oligocatenanes possessing multiple mechanical bonds remains a formidable challenge in the field of mechanically interlocked molecules. Here, a one-pot synthetic strategy is described to prepare a linear [4]catenate using orthogonal metal templation between a macrocycle precursor, composed of terpyridine and phenanthroline ligands spaced by flexible glycol linkers, and a closed phenanthroline-based molecular ring. Implementation of two simultaneous ring-closing metathesis reactions after metal complexation resulted in the formation of three mechanical bonds. The linear [4]catenate product was isolated in 55% yield as a mixture of topological diastereomers. The intermediate metal complexes and corresponding interlocked products (with and without metals) were characterized by nuclear magnetic resonance, mass spectrometry, gel permeation chromatography, and UV-vis absorption spectroscopy. We envision that this general synthetic strategy may pave the way for the synthesis of higher order linear oligocatenates/catenanes with precise molecular weights and four or more interlocking molecular rings.

Interest in the design and development of artificial molecular muscles has inspired scientists to pursue new stimuli-responsive systems capable of exhibiting a physical and mechanical change in a material in response to one or more external environmental cues. Over the past few decades, many different types of stimuli have been investigated as a means to actuate materials. In particular, materials that respond to reduction and oxidation of their constituent molecular components have shown great promise on account of their ability to be activated either chemically or electrochemically. Here, we introduce a novel redox-responsive mechanism of actuation in hydrogels by describing a systematic investigation into the radical-based self-assembly of a series of unimolecular viologen-based oligomeric links, present at only 5 mol % of the polymer linkers in a three-dimensional network. The actuation process results in an overall reversible contraction of a family of hydrogels, down to 35% of their original volume ...

Irradiation at 460 nm of [Mo

Although it is well known that viologen radical cations can self-assemble into stacks or complexes on account of radical-radical pairing interactions, it has only recently been demonstrated that reduction of main-chain polyviologens integrated into hydrogel networks can trigger actuation. In these earlier examples, hydrogels comprising oligoethylene glycol-based polyviologens and poly(ethylene glycol) were functionalized with terminal azide groups to prepare ‘click’-based gels. Here, we report a new structural design for the functional polyviologen that consists of main-chain viologen subunits separated by hexamethylene groups instead of glycols and is capped at each end with styrene groups. Activation of this viologen-based macrocrosslinker was achieved using chemical- and photoreduction methods and its ability to undergo intramolecular chain-folding was monitored by absorption spectroscopy. Acrylate-based organogels and hydrogels were also prepared and a comparison was carried out to assess the actuator performance in each gel in terms of the rate of contraction and changes in stiffness.

The complexes [Pt(mdt)2] (4; mdt = methyldithiolene, [Me2C2S2](n-)), [Pt(adt)2] (5; adt = p-anisyldithiolene, [(MeO-p-C6H4)2C2S2](n-)), and [Pd(adt)2] (10) have been prepared in yields of ≥90% via transmetalation reactions with the corresponding [R2Sn(S2C2R'2)] complexes (R = (n)Bu, R' = Me; R = Me, R' = -C6H4-p-OMe, 3). Intraligand C-S and C-Cchelate bond lengths (~1.71 and ~1.40 Å, respectively) obtained by X-ray crystallography show these compounds to be comprised of radical monoanions mdt(•-) and adt(•-). The six-coordinate octahedral adducts [Pt(adt)2(dppe)] [6; dppe = 1,2-bis(diphenylphosphino)ethane], trans-[Pt(adt)2(PMe3)2] (8), and trans-[Pt(mdt)2(PMe3)2] (9) have also been prepared, and crystal structures reveal dithiolene ligands that are fully reduced ene-1,2-dithiolates (C-S and C-C(chelate) = ~1.77 and 1.35 Å, respectively). Reduction of the dithiolene ligand thus occurs to accommodate the +IV oxidation state typical of octahedral six-coordinate platinum. The cyclic voltammogram of 5 shows two fully reversible reductions at -0.11 and -0.84 V in CH2Cl2 (vs Ag/AgCl), attributed to successive (adt(•-) + e(-) → adt(2-)) processes, and a reversible oxidation at +1.01 V. The cyclic voltammogram of 9 shows two reversible oxidations at +0.38 and +0.86 V, which are assigned as successive (adt(2-) → adt(•-) + e(-)) oxidations. Consistent with their formulation as having fully reduced dithiolene ligands, the UV-vis spectra for 6, 8, and 9 show no low-energy absorptions below 700 nm, and the S K-edge XAS spectra of 6 and 8 show dithiolene sulfur that is reduced relative to that in 5. The introduction of PMe3 to 10 did not produce the palladium analogue of 8 but rather [Pd(adt)(PMe3)2] (11). The reaction of [PdCl2(PPh3)2] with Li2(mdt) produced a mixture of [Pd(mdt)(PPh3)2] (12, 20%) and [(Ph3P)Pd(μ-1,2-mdt-S,S':S)2Pd(PPh3)] (13, 28%), with the latter having C2 symmetry with a Pd2S2 core structure folded along the S···S axis.

A series of reports describing the syntheses and structures of [MCl2(diazadiene)] (M = Cr, Mo, W) complexes is reassessed in the context of known chemistry of low-valent Group VI metal complexes, crystallographic trends such as M-Cl bond lengths and unit cell volumes, and calculated metal-ligand bond lengths. Crystallographic data and computational results are inconsistent with any of these species being second or third row transition metal complexes. A review of the crystallographic information files accompanying the [MCl2(diazadiene)] (M = Mo, W) published structures reveals that the metal atoms were inappropriately treated with partial site occupancy factors (0.775 for Mo; 0.4005 and 0.417 for W), the effect of which was to manifest lighter-element behavior and better refinement in accord with the metal atoms' correct identity. A deliberate synthesis and characterization by X-ray diffraction of [ZnCl2((Mes)dad(Me))] ((Mes)dad(Me) = 1,4-bis(2,4,6-trimethylphenyl)-2,3-dimethyl-1,4-diaza-1,3-butadiene) are reported. Refinement of this structure with the same combination of second or third row metal and offsetting partial site occupancy is shown to provide final refinement statistics essentially the same as with the correct model employing M = Zn at site occupancy 1.00. Use of the published method for synthesis of [WCl2(diazadiene)] with (Mes)dad(Me) and [WBr4(MeCN)2] in lieu of [WCl4(MeCN)2] is shown to produce [ZnBr2((Mes)dad(Me))], which has also been characterized by X-ray diffraction. It is concluded that the unusual putative 12-electron [MCl2(diazadiene)] (M = Cr, Mo, W) complexes are in all cases the corresponding [ZnCl2(diazadiene)] complexes, Zn having been commonly employed as reducing agent in their synthesis.