Search

SummaryLoss of muscle stem cell (MuSC) self-renewal with aging reflects a combination of influences from the intracellular (e.g., post-transcriptional modifications) and extracellular (e.g., matrix stiffness) environment. Whereas conventional single cell analyses have revealed valuable insights into factors contributing to impaired self-renewal with age, most are limited by static measurements that fail to capture nonlinear dynamics. Using bioengineered matrices mimicking the stiffness of young and old muscle, we showed that while young MuSCs were unaffected by aged matrices, old MuSCs were phenotypically rejuvenated by young matrices. Dynamical modeling of RNA velocity vector fieldsin silicorevealed that soft matrices promoted a self-renewing state in old MuSCs by attenuating RNA decay. Vector field perturbations demonstrated that the effects of matrix stiffness on MuSC self-renewal could be circumvented by fine-tuning the expression of the RNA decay machinery. These results demonstrate that post-transcriptional dynamics dictate the negative effect of aged matrices on MuSC self-renewal.Graphical AbstractGraphical abstract description:The balance of self-renewal and differentiation in young muscle stem cells (MuSCs) is robust to perturbations of the biophysical microenvironment. In contrast, aged MuSCs are highly sensitive to extrinsic perturbations, and exposure to a youthful microenvironment rejuvenates the self-renewing potential of aged MuSCs by modulating post-transcriptional RNA dynamics.

Visual Abstract, Highlights • A simple, biohybrid patch made of polymer (PECUU) and ECM, without cellular components, was able to induce positive remodeling features when applied over chronic infarcts with severely dilated hearts and high cardiac function impairment in rats. • The remodeling benefit was particularly notable in a subgroup of the sickest rats with very low initial ejection fraction in which the echocardiographic endpoints were found to improve after treatment. • This technological approach may hold promise for future translation to patients in a chronic scenario., Summary A biohybrid patch without cellular components was implanted over large infarcted areas in severely dilated hearts. Nonpatched animals were assigned to control or losartan therapy. Patch-implanted animals responded with better morphological and functional echocardiographic endpoints, which were more evident in a subgroup of animals with very low pre-treatment ejection fraction (

Radiation therapy (RT) is essential for triple negative breast cancer (TNBC) treatment. However, patients with TNBC continue to experience recurrence after RT. Extracellular matrix (ECM) alternations in healthy breast tissue induced by radiation and its role in tumor recurrence are still unknown. In this study, we evaluated the structure, molecular composition, and mechanical properties of irradiated murine mammary fat pads (MFPs) and developed ECM hydrogels from decellularized tissues to assess the effects of RT-induced ECM changes on breast cancer cell behavior. Irradiated MFPs were characterized by increased ECM deposition and fiber density compared to unirradiated controls, which may provide a platform for cell invasion and proliferation. ECM component changes in collagens I, IV, and VI, and fibronectin were observed following irradiation. Encapsulated TNBC cell proliferation was enhanced in irradiated ECM hydrogels, and morphology analysis indicated an increase in invasive capacity. In addition, TNBC cells co-cultured with macrophages in irradiated ECM hydrogels exhibited further increases in cell proliferation. Our study establishes that the ECM in the irradiated microenvironment promotes TNBC invasion and proliferation that is enhanced in the presence of macrophages. This work represents an important step toward elucidating how changes in the ECM after RT contribute to breast cancer recurrence.

Promoting a healthy diet, mainly in youths, is the most effective action to prevent and fight dietary excesses and nutritional imbalance in the population. MaestraNatura (MN) is an innovative nutritional education program aimed at promoting a healthy lifestyle in first-level secondary school students. The study evaluated the effectiveness of the MN program in improving knowledge in students following the MN program (MN group) with respect to a control group (CO group) undergoing a “traditional” nutritional education path. To this end, the nutrition knowledge of the two groups was assessed by three multi-choice questionnaires. The results showed a significant improvement in knowledge (p < 0.001) in the MN group with respect to the CO group for all the questionnaires. Furthermore, the students’ ability to transfer the principles of nutrition guidelines to the real context of daily meals was determined by asking the MN group to create a weekly food plan before (T0) and after (T1) the completion of the MN program. The MN group demonstrated improved performance in organizing the weekly menu plan at T1 with respect to T0 (p = 0.005). In conclusion, the MN nutritional education program appears to be an effective tool for improving knowledge and skills on nutritional issues, especially in those students with a lower starting level of knowledge and ability.

MaestraNatura (MN) is a nutrition education program developed to both enhance awareness about the importance of healthy eating behaviour and skills on food and nutrition in primary school students. The level of knowledge about food and nutritional issues was assessed by a questionnaire administered to 256 students (9–10 years old) attending the last class of primary school and was compared with that of a control group of 98 students frequenting the same schools that received traditional nutrition education based on curricular science lessons and one frontal lesson conducted by an expert nutritionist. The results indicated that students in the MN program showed a higher percentage of correct responses to the questionnaire when compared with the control group (76 ± 15.4 vs. 59 ± 17.7; p < 0.001). Furthermore, the students attending the MN program were requested to organise a weekly menu before (T0) and when finished (T1) the MN program. The results evidenced an overall significant improvement in the score obtained at T1 with respect to those at T0 (p < 0.001), indicating a strong improvement in the ability to translate the theoretical concepts of nutrition guidelines in practice. In addition, the analysis revealed a gender gap between boys and girls, with boys showing a worse score at T0 that was ameliorated after the completion of the program (p < 0.001). Overall, MN program is effective in improving nutrition knowledge amongst 9–10-year-old students. Furthermore, students showed an increased ability to organise a weekly dietary plan after completing the MN program, a result which also bridged gender gaps. Thus, preventive nutrition education strategies specifically addressed to boys and girls, and involving both the school and family, are needed to make children aware of the importance of a healthy lifestyle and to correct inadequate eating habits.

Vascular grafts are used as vascular access for hemodialysis, the most common renal replacement therapy to artificially clean blood waste after kidney malfunction. Despite that they are widely used in clinical practice, upon implantation, synthetic vasculars show complications such as thrombogenesis, reduced patency rates, low blood pressure, or even complete collapse. In this study, a C-shaped vascular graft was manufactured with small intestinal submucosa (SIS) and modified on the surface and the bulk of the material via conjugation of polyethylene glycol (PEG) to obtain a biocompatible and less thrombogenic vascular graft than the commercially available polytetrafluoroethylene (ePTFE) vascular grafts. Molecular weight and concentration of PEG molecules were systematically varied to gain insights into the underlying structure-function relationships. We analyzed the chemical, thermal, and mechanical properties of vascular grafts modified with 6 equiv of SIS-PEG 400 as well as cytotoxicity and in vitro platelet deposition. Immune response, patency rates, and extent of regeneration were also tested in vivo with the aid of swine animal models. Results showed that the conjugation levels achieved were sufficient to improve graft compliance, therefore approaching that of native vessels, while platelet deposition was altered leading to a 95% reduction compared with pristine SIS and 92% with respect to ePTFE. HE staining on explanted samples corroborated SIS-PEG 400 biocompatibility and the ability to promote regeneration. The obtained results set solid foundations for the rational design and manufacture of a regenerative, small diameter vascular graft model and introduce an alternative to ePTFE vascular grafts for hemodialysis access.

After more than 22 years of research challenges and innovation, the heart valve tissue engineering paradigm still attracts attention as an approach to overcome limitations which exist with clinically utilized mechanical or bioprosthetic heart valves. Despite encouraging results, delayed translation can be attributed to limited knowledge on the concurrent mechanisms of biomaterial degradation in vivo, host inflammatory response, cell recruitment, and de novo tissue elaboration. This study aimed to reduce this gap by evaluating three alternative levels at which lability could be incorporated into candidate polyurethane materials electroprocessed into a valve scaffold. Specifically, polyester and polycarbonate labile soft segment diols were reacted into thermoplastic elastomeric polyurethane ureas that formed scaffolds where (1) a single polyurethane containing both of the two diols in the polymer backbone was synthesized and processed, (2) two polyurethanes were physically blended, one with exclusively polycarbonate and one with exclusively polyester diols, followed by processing of the blend, and (3) the two polyurethane types were concurrently processed to form individual fiber populations in a valve scaffold. The resulting valve scaffolds were characterized in terms of their mechanics before and after exposure to varying periods of pulsatile flow in an enzymatic (lipase) buffer solution. The results showed that valve scaffolds made from the first type of polymer and processing combination experienced more extensive degradation. This approach, although demonstrated with polyurethane scaffolds, can generally be translated to investigate biomaterial approaches where labile elements are introduced at different structural levels to alter degradation properties while largely preserving the overall chemical composition and initial mechanical behavior.

Objective Ideal heart valve solutions aim to provide thrombosis-free durability. A scaffold-based polycarbonate urethane urea tissue-engineered heart valve designed to mimic native valve microstructure and function was used. This study examined the acute in vivo function of a stented tissue-engineered heart valve in a porcine model. Methods Trileaflet valves were fabricated by electrospinning polycarbonate urethane urea using double component fiber deposition. The tissue-engineered heart valve was mounted on an AZ31 magnesium alloy biodegradable stent frame. Five 80-kg Yorkshire pigs underwent open tissue-engineered heart valve implantation on cardiopulmonary bypass in the pulmonary position. Tissue-engineered heart valve function was echocardiographically evaluated immediately postimplant and at planned study end points at 1, 4, 8, and 12 hours. Explanted valves underwent biaxial mechanical testing and scanning electron microscopy for ultrastructural analysis and thrombosis detection. Results All 5 animals underwent successful valve implantation. All were weaned from cardiopulmonary bypass, closed, and recovered until harvest study end point except 1 animal that was found to have congenital tricuspid valve dysplasia and that was euthanized postimplant. All 5 cases revealed postcardiopulmonary bypass normal leaflet function, no regurgitation, and an average peak velocity of 2 m/s, unchanged at end point. All tissue-engineered heart valve leaflets retained microstructural architecture with no platelet activation or thrombosis by scanning electron microscopy. There was microscopic evidence of fibrin deposition on 2 of 5 stent frames, not on the tissue-engineered heart valve. Biaxial stress examination revealed retained postimplant mechanics of tissue-engineered heart valve fibers without functional or ultrastructural degradation. Conclusions A biodegradable elastomeric heart valve scaffold for in situ tissue-engineered leaflet replacement is acutely functional and devoid of leaflet microthrombosis.

MaestraNatura is an innovative nutrition education program aimed at both enhancing awareness about the importance of a healthy food–lifestyle relationship and the ability to transfer the theoretical principles of nutrition guidelines to everyday life. The educational contents of the program resulted from the analysis of the answers to a questionnaire submitted to students aged 6–13 in order to assess their degree of knowledge about nutritional facts. Educational paths were specifically designed and implemented to address the main knowledge gaps identified through the analysis of the answers and were then tested for teachers’ satisfaction in a sample of 56 schools in the north, centre, and south of Italy, involving 790 classes, 600 teachers, and 15,800 students. The results showed an approval rating from teachers from 90% to 94%. Said paths were designed for primary (6–10 years old) and first-level secondary (11–13 years old) school students. In addition, in a pilot study carried out in nine Educational Institutes located in an area close to Rome (Lazio region), a specific path was tested for effectiveness in increasing students’ knowledge about fruit and vegetables by conducting questionnaires before (T0) and after (T1) the didactic activities. Results showed a significant increase in right answers at T1 with respect to T0 (z = 2.142, p = 0.032). Fisher’s exact probability test showed an answer variability depending on the issue considered. In conclusion, this work could be considered as a first necessary step toward the definition of new educational program, aimed at increasing food literacy and favouring a healthier relationship with food, applicable in a widespread and effective manner, also outside of Italy.

The challenge of developing scaffolds to reconstruct critical-sized calvarial defects without the addition of high levels of exogenous growth factor remains relevant. Both osteogenic regenerative efficacy and suitable mechanical properties for the temporary scaffold system are of importance. In this study, a Mg alloy mesh reinforced polymer/demineralized bone matrix (DBM) hybrid scaffold was designed where the hybrid scaffold was fabricated by a concurrent electrospinning/electrospraying of poly(lactic-co-glycolic acid) (PLGA) polymer and DBM suspended in hyaluronic acid (HA). The Mg alloy mesh significantly increased the flexural strength and modulus of PLGA/DBM hybrid scaffold. In vitro results demonstrated that the Mg alloy mesh reinforced PLGA/DBM hybrid scaffold (Mg-PLGA@HA&DBM) exhibited a stronger ability to promote the proliferation of bone marrow stem cells (BMSCs) and induce BMSC osteogenic differentiation compared with control scaffolding materials lacking critical components. In vivo osteogenesis studies were performed in a rat critical-sized calvarial defect model and incorporated a variety of histological stains and immunohistochemical staining of osteocalcin. At 12 weeks, the rat model data showed that the degree of bone repair for the Mg-PLGA@HA&DBM scaffold was significantly greater than for those scaffolds lacking one or more of the principal components. Although complete defect filling was not achieved, the improved mechanical properties, promotion of BMSC proliferation and induction of BMSC osteogenic differentiation, and improved promotion of bone repair in the rat critical-sized calvarial defect model make Mg alloy mesh reinforced PLGA/DBM hybrid scaffold an attractive option for the repair of critical-sized bone defects where the addition of exogenous isolated growth factors is not employed.

Physical cues are decisive factors in extracellular matrix (ECM) formation and elaboration. Their transduction across scale lengths is an inherently symbiotic phenomenon that while influencing ECM fate is also mediated by the ECM structure itself. This study investigates the possibility of enhancing ECM elaboration by topological cues that, while not modifying the substrate macro scale mechanics, can affect the meso-scale strain range acting on cells incorporated within the scaffold. Vascular smooth muscle cell micro-integrated, electrospun scaffolds were fabricated with comparable macroscopic biaxial mechanical response, but different meso-scale topology. Seeded scaffolds were conditioned on a stretch bioreactor and exposed to large strain deformations. Samples were processed to evaluate ECM quantity and quality via: biochemical assay, qualitative and quantitative histological assessment and multi-photon analysis. Experimental evaluation was coupled to a numerical model that elucidated the relationship between the scaffold micro-architecture and the strain acting on the cells. Results showed an higher amount of ECM formation for the scaffold type characterized by lowest fiber intersection density. The numerical model simulations associated this result with the differences found for the change in cell nuclear aspect ratio and showed that given comparable macro scale mechanics, a difference in material topology created significant differences in cell-scaffold meso-scale deformations. These findings reaffirmed the role of cell shape in ECM formation and introduced a novel notion for the engineering of cardiac tissue where biomaterial structure can be designed to both mimick the organ level mechanics of a specific tissue of interest and elicit a desirable cellular response.

Valvular heart disease is currently treated with mechanical valves, which benefit from longevity, but are burdened by chronic anticoagulation therapy, or with bioprosthetic valves, which have reduced thromboembolic risk, but limited durability. Tissue engineered heart valves have been proposed to resolve these issues by implanting a scaffold that is replaced by endogenous growth, leaving autologous, functional leaflets that would putatively eliminate the need for anticoagulation and avoid calcification. Despite the diversity in fabrication strategies and encouraging results in large animal models, control over engineered valve structure-function remains at best partial. This study aimed to overcome these limitations by introducing double component deposition (DCD), an electrodeposition technique that employs multi-phase electrodes to dictate valve macro and microstructure and resultant function. Results in this report demonstrate the capacity of the DCD method to simultaneously control scaffold macro-scale morphology, mechanics and microstructure while producing fully assembled stent-less multi-leaflet valves composed of microscopic fibers. DCD engineered valve characterization included: leaflet thickness, biaxial properties, bending properties, and quantitative structural analysis of multi-photon and scanning electron micrographs. Quasi-static ex-vivo valve coaptation testing and dynamic organ level functional assessment in a pressure pulse duplicating device demonstrated appropriate acute valve functionality.

Summary Age‐related declines in skeletal muscle regeneration have been attributed to muscle stem cell (MuSC) dysfunction. Aged MuSCs display a fibrogenic conversion, leading to fibrosis and impaired recovery after injury. Although studies have demonstrated the influence of in vitro substrate characteristics on stem cell fate, whether and how aging of the extracellular matrix (ECM) affects stem cell behavior has not been investigated. Here, we investigated the direct effect of the aged muscle ECM on MuSC lineage specification. Quantification of ECM topology and muscle mechanical properties reveals decreased collagen tortuosity and muscle stiffening with increasing age. Age‐related ECM alterations directly disrupt MuSC responses, and MuSCs seeded ex vivo onto decellularized ECM constructs derived from aged muscle display increased expression of fibrogenic markers and decreased myogenicity, compared to MuSCs seeded onto young ECM. This fibrogenic conversion is recapitulated in vitro when MuSCs are seeded directly onto matrices elaborated by aged fibroblasts. When compared to young fibroblasts, fibroblasts isolated from aged muscle display increased nuclear levels of the mechanosensors, Yes‐associated protein (YAP)/transcriptional coactivator with PDZ‐binding motif (TAZ), consistent with exposure to a stiff microenvironment in vivo. Accordingly, preconditioning of young fibroblasts by seeding them onto a substrate engineered to mimic the stiffness of aged muscle increases YAP/TAZ nuclear translocation and promotes secretion of a matrix that favors MuSC fibrogenesis. The findings here suggest that an age‐related increase in muscle stiffness drives YAP/TAZ‐mediated pathogenic expression of matricellular proteins by fibroblasts, ultimately disrupting MuSC fate.

In pediatric cardiovascular surgery, there is a significant need for vascular prostheses that have the potential to grow with the patient following implantation. Current clinical options consist of nonexpanding conduits, requiring repeat surgeries as the patient outgrows the device. To address this issue, PECA Labs has developed a novel ePTFE vascular conduit with the capability of being radially expanded via balloon catheterization. In the described study, a systematic characterization and comparison of two proprietary ePTFE expandable conduits was conducted. Conduit sizes of 8 and 16 mm inner diameters for both conduits were evaluated before and after expansion with a 26 mm balloon. Comprehensive mechanical testing was completed, including quantification of circumferential, and longitudinal tensile strength, suture retention strength, burst strength, water entry pressure, dynamic compliance, and kink radius. Scanning electron microscopy was used to investigate the microstructural properties. Automated extraction of the fiber architectural features for each scanning electron micrograph was achieved with an algorithm for each conduit before and after expansion. Results showed that both conduits were able to expand significantly, to as much as 2.5× their original inner diameter. All mechanical properties were within clinically acceptable values following expansion. Analysis of the microstructure properties of the conduits revealed that the circumferential main angle of orientation, orientation index, and spatial periodicity did not significantly change following expansion, whereas the node area fraction decreased post expansion. Successful proof-of-concept of this novel product represents a critical step toward clinical translation and provides hope for newborns and growing children with congenital heart disease. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 659-671, 2018.

Female cancer patients who have undergone chemotherapy have an elevated risk of developing premature ovarian failure (POF) and infertility. Experimental approaches to treat iatrogenic infertility are evolving rapidly; however, there remain challenges and risks that have hindered clinical translation. To address these concerns, we developed an ovarian-specific extracellular matrix hydrogel to facilitate follicle delivery and establish anin situovary (ISO). We demonstrate sustainable engraftment, natural pregnancy and the birth of healthy pups after intraovarian microinjection of isolated exogenous follicles in a chemotherapy-induced POF mouse model. Our results suggest that the methods described could offer a minimally invasive alternative for the restoration of the ovarian reserve post-chemotherapy.

Degradable heart valves based on in situ tissue regeneration have been proposed as potentially durable and non-thrombogenic prosthetic alternatives. We evaluated the acute in vivo function, microstructure, mechanics, and thromboresistance of a stentless biodegradable tissue-engineered heart valve (TEHV) in the tricuspid position. Biomimetic stentless tricuspid valves were fabricated with poly(carbonate urethane)urea (PCUU) by double-component deposition (DCD) processing to mimic native valve mechanics and geometry. Five swine then underwent 24-h TEHV implantation in the tricuspid position. Echocardiography demonstrated good leaflet motion and no prolapse and trace to mild regurgitation in all but one animal. Histology revealed patches of proteinaceous deposits with no cellular uptake. SEM demonstrated retained scaffold microarchitecture with proteinaceous deposits but no platelet aggregation or thrombosis. Explanted PCUU leaflet thickness and mechanical anisotropy were comparable with native tricuspid leaflets. Bioinspired, elastomeric, stentless TEHVs fabricated by DCD were readily implantable and demonstrated good acute function in the tricuspid position.

Although adipose-derived stem cells (ADSCs) have shown promise in cardiac regeneration, stable engraftment is still challenging. Acellular bioengineered cardiac patches have shown promise in positively altering ventricular remodeling in ischemic cardiomyopathy. We hypothesized that combining an ADSC sheet approach with a bioengineered patch would enhance ADSC engraftment and positively promote cardiac function compared with either therapy alone in a rat ischemic cardiomyopathy model.Cardiac patches were generated from poly(ester carbonate urethane) urea and porcine decellularized cardiac extracellular matrix. ADSCs constitutively expressing green fluorescent protein were established from F344 rats and transplanted as a cell sheet over the left ventricle 3 days after left anterior descending artery ligation with or without an overlying cardiac patch. Cardiac function was serially evaluated using echocardiography for 8 weeks, comparing groups with combined cells and patch (group C, n = 9), ADSCs alone (group A, n = 7), patch alone (group P, n = 6) or sham groups (n = 7).Much greater numbers of ADSCs survived in the C versus A groups (P .01). At 8 weeks posttransplant, the percentage fibrotic area was lower (P .01) in groups C and P compared with the other groups and vasculature in the peri-infarct zone was greater in group C versus other groups (P .01), and hepatocyte growth factor expression was higher in group C than in other groups (P .05). Left ventricular ejection fraction was higher in group C versus other groups.A biodegradable cardiac patch enhanced ADSC engraftment, which was associated with greater cardiac function and neovascularization in the peri-infarct zone following subacute myocardial infarction.

Informal caregivers are the unpaid persons who take care of a not self-sufficient family member, due to old age or chronic illness or disability. As in all the European countries, the demand for informal cares is further increased as a result of the ageing societies and the social and political fallout of informal caregiving is a very current and important issue. We have overviewed some international scientific literature, with the aim of understanding the key research objectives to be firstly pursued to address this problem. In particular, we focused on the psycho-physical health differences in informal caregivers, subjected to long lasting load and prolonged stress, as compared to non caregiver persons. We also underlined the relationship between caregiver health differences and stress, gender type, kind of the care recipient (autism) and social and political situation in Europe and Italy. The collected data indicate the necessity to prevent caregiver psychological and physical health by appropriate laws, especially supporting women, often most involved in care activities.

Physical cues are decisive factors in extracellular matrix (ECM) formation and elaboration. Their transduction across scale lengths is an inherently symbiotic phenomenon that while influencing ECM fate is also mediated by the ECM structure itself. This study investigates the possibility of enhancing ECM elaboration by topological cues that, while not modifying the substrate macro scale mechanics, can affect the meso-scale strain range acting on cells incorporated within the scaffold. Vascular smooth muscle cell micro-integrated, electrospun scaffolds were fabricated with comparable macroscopic biaxial mechanical response, but different meso-scale topology. Seeded scaffolds were conditioned on a stretch bioreactor and exposed to large strain deformations. Samples were processed to evaluate ECM quantity and qualityvia: biochemical assay, qualitative and quantitative histological assessment and multi-photon analysis. Experimental evaluation was coupled to a numerical model that elucidated the relationship between the scaffold micro-architecture and the strain acting on the cells. Results showed an higher amount of ECM formation for the scaffold type characterized by lowest fiber intersection density. The numerical model simulations associated this result with the differences found for the change in cell nuclear aspect ratio and showed that given comparable macro scale mechanics, a difference in material topology created significant differences in cell–scaffold meso-scale deformations. These findings reaffirmed the role of cell shape in ECM formation and introduced a novel notion for the engineering of cardiac tissue where biomaterial structure can be designed to both mimick the organ level mechanics of a specific tissue of interest and elicit a desirable cellular response.

Objectives The present study compared physical, mechanical, and biologic characteristics of 4 clinically available surgical sealants for cardiovascular repair. Methods BioGlue (Cryolife Inc, Kennesaw, Ga), PreveLeak (Mallinckrodt Pharmaceuticals, St Louis, Mo), Tridyne VS (BD, Franklin Lakes, NJ), and Coseal (Baxter Healthcare Corporation, Westlake Village, Calif) were compared for the following properties: hydrated swelling, cytocompatibility, burst strength, biaxial stretching (elasticity), and in vitro degradation. Results Sealants showed a wide range of swelling upon hydration. By gravimetric and volumetric measurement, swelling was greatest for Coseal followed by Tridyne VS, BioGlue, and PreveLeak. Tridyne VS was the most cytocompatible based on Alamar Blue assay results, supporting 85% cell survival compared with 36% to 39% survival with the other sealants. All sealants withstood pressure above mean arterial pressure (70-110 mm Hg) and physiologic systolic blood pressure (90-140 mm Hg) in an ex vivo arterial flow burst model; lowest peak pressure at failure was PreveLeak at 235 ± 48 mm Hg, and highest peak pressure at failure was BioGlue at 596 ± 72 mm Hg. Biaxial tensile testing showed no differences in elasticity between ex vivo porcine aorta and carotid arteries and Tridyne VS or Coseal, and BioGlue and PreveLeak were significantly stiffer. In vitro degradation time for Coseal was 6 days and 21 days for Tridyne VS. No degradation was observed in BioGlue or PreveLeak for 30 days. Conclusions Although all sealants withstood supraphysiologic arterial pressure, there were differences in characteristics that may be important in clinical outcome. Coseal degradation time was short compared with other sealants, whereas BioGlue and PreveLeak showed a significant compliance mismatch with native porcine carotid artery. Tridyne VS was significantly more cytocompatible than the other 3 sealants.

Whole organ engineering and cell-based regenerative medicine approaches are being investigated as potential therapeutic options for end-stage liver failure. However, a major challenge of these strategies is the loss of hepatic specific function after hepatocytes are removed from their native microenvironment. The objective of the present study was to determine if solubilized liver extracellular matrix (ECM), when used as a media supplement, can better maintain hepatocyte phenotype compared to type I collagen alone or solubilized ECM harvested from a non-liver tissue source. Liver extracellular matrix (LECM) from four different species was isolated via liver tissue decellularization, solubilized, and then used as a media supplement for primary rat hepatocytes (PRH). The four species of LECM investigated were human, porcine, canine and rat. Cell morphology, albumin secretion, and ammonia metabolism were used to assess maintenance of hepatocyte phenotype. Biochemical and mechanical characterization of each LECM were also conducted. Results showed that PRH's supplemented with canine and porcine LECM maintained their phenotype to a greater extent compared to all other groups. PRH's supplemented with canine and porcine LECM showed increased bile production, increased albumin production, and the formation of multinucleate cells. The findings of the present study suggest that solubilized liver ECM can support in-vitro hepatocyte culture and should be considered for therapeutic and diagnostic techniques that utilize hepatocytes.

Summary Background/Objective We have previously shown that an extracellular matrix (ECM) bioscaffold derived from porcine small intestine submucosa (SIS) enhanced the healing of a gap injury of the medial collateral ligament as well as the central third defect of the patellar tendon. With the addition of a hydrogel form of SIS, we found that a transected goat anterior cruciate ligament (ACL) could also be healed. The result begs the research question of whether SIS hydrogel has positive effects on ACL fibroblasts (ACLFs) and thus facilitates ACL healing. Methods In the study, ECM-SIS hydrogel was fabricated from the digestion of decellularised and sterilised sheets of SIS derived from αGal-deficient (GalSafe) pigs. As a comparison, a pure collagen hydrogel was also fabricated from commercial collagen type I solution. The morphometrics of hydrogels was assessed with scanning electron microscopy. The ECM-SIS and collagen hydrogels had similar fibre diameters (0.105 ± 0.010 μm vs. 0.114 ± 0.004 μm), fibre orientation (0.51 ± 0.02 vs. 0.52 ± 0.02), and pore size (0.092 ± 0.012 μm vs. 0.087 ± 0.008 μm). The preservation of bioactive properties of SIS hydrogel was assessed by detecting bioactive molecules sensitive to processing and enzyme digestion, such as growth factors fibroblast growth factor-2 (FGF-2) and transforming growth factor-beta 1 (TGF-β1), with enzyme-linked immunosorbent assay. ACLFs were isolated and expanded in culture from explants of rat ACLs (n = 3). The cells were then seeded on the hydrogels and cultured with 0%, 1%, and 10% foetal bovine serum (FBS) for 3 days and 7 days. Cell attachment was observed using a light microscope and scanning electron microscopy, whereas cell proliferation and matrix production (collagen types I and III) were examined with bromodeoxyuridine assays and reverse transcription-polymerase chain reaction, respectively. Results The results showed that FGF-2 and TGF-β1 in the SIS hydrogel were preserved by 50% (65.9 ± 26.1 ng/g dry SIS) and 90% (4.4 ± 0.6 ng/g dry SIS) relative to their contents in ECM-SIS sheets, respectively. At Day 3 of culture, ACLFs on the SIS hydrogel were found to proliferate 39%, 31%, and 22% more than those on the pure collagen hydrogel at 0%, 1%, and 10% FBS, respectively (p

Native semi-lunar heart valves are composed of a dense fibrous network that generally follows a curvilinear path along the width of the leaflet. Recent models of engineered valve leaflets have predicted that such curvilinear fiber orientations would homogenize the strain field and reduce stress concentrations at the commissure. In the present work, a method was developed to reproduce this curvilinear fiber alignment in electrospun scaffolds by varying the geometry of the collecting mandrel. Elastomeric poly(ester urethane)urea was electrospun onto rotating conical mandrels of varying angles to produce fibrous scaffolds where the angle of fiber alignment varied linearly over scaffold length. By matching the radius of the conical mandrel to the radius of curvature for the native pulmonary valve, the electrospun constructs exhibited a curvilinear fiber structure similar to the native leaflet. Moreover, the constructs had local mechanical properties comparable to conventional scaffolds and native heart valves. In agreement with prior modeling results, it was found under quasi-static loading that curvilinear fiber microstructures reduced strain concentrations compared to scaffolds generated on a conventional cylindrical mandrels. Thus, this simple technique offers an attractive means for fabricating scaffolds where key microstructural features of the native leaflet are imitated for heart valve tissue engineering.

An important class of biomaterials is composed of layered networks of elastomeric fibers. While there is a growing interest in modeling and simulation of the mechanical response of these biomaterials, a theoretical foundation for such simulations has yet to be firmly established. The present work addresses this issue in two ways. First, using methods of geometric probability we develop theoretical estimates for the linear and areal fiber intersection densities for two-dimensional fibrous networks. These are expressed in terms of the fiber density and orientation distribution function, both of which are relatively easy to measure properties. Secondly, we develop a random walk algorithm for geometric simulation of two-dimensional fibrous networks which can accurately reproduce prescribed fiber density and orientation distribution function. Furthermore, the linear and areal fiber intersection densities obtained with the algorithm are in agreement with the theoretical estimates. Both theoretical and computational results are compared with those obtained by post-processing of SEM images of actual scaffolds. These comparisons reveal difficulties inherent to resolving fine details of multilayered fibrous networks. We also note that one should think not in terms of sufficiently large specimens for analysis, but rather sufficiently fiber-filled specimens. Correctly identifying and matching key geometric features is a critically important first step for performing reliable mechanical simulations. The methods provided herein can provide a rational means to define and generate key geometric features from scaffold structural data.

Determination of correlations between transmural mechanical and morphological properties of aorta would provide a quantitative baseline for assessment of preventive and therapeutic strategies for aortic injuries and diseases. A multimodal and multidisciplinary approach was adopted to characterize the transmural morphological properties of descending porcine aorta. Histology and multi-photon microscopy were used for describing the media layer micro-architecture in the circumferential-radial plane, and Fourier Transform infrared imaging spectroscopy was utilized for determining structural protein, and total protein content. The distributions of these quantified properties across the media thickness were characterized and their relationship with the mechanical properties from a previous study was determined. Our findings indicate that there is an increasing trend in the instantaneous Young[U+05F3]s modulus (E), elastic lamella density (ELD), structural protein (SPR), total protein (TPR), and elastin and collagen circumferential percentage (ECP and CCP) from the inner towards the outer layers. Two regions with equal thickness (inner and outer halves) were determined with significantly different morphological and material properties. The results of this study represent a substantial step toward anatomical characterization of the aortic wall building blocks and establishment of a foundation for quantifying the role of microstructural components on the functionality of aorta.

Ventral hernia is often addressed surgically by the placement of prosthetic materials, either synthetic or from allogeneic and xenogeneic biologic sources. Despite advances in surgical approaches and device design, a number of postsurgical limitations remain, including hernia recurrence, mesh encapsulation, and reduced vascularity of the implanted volume. The in situ controlled release of angiogenic factors from a scaffold facilitating abdominal wall repair might address some of these issues associated with suboptimal tissue reconstruction. Furthermore, a biocomposite material that combines the favorable mechanical properties achievable with synthetic materials and the bioactivity associated with xenogeneic tissue sources would be desirable. In this report, an abdominal wall repair scaffold has been designed based on a microfibrous, elastomeric poly(ester carbonate)urethane urea matrix integrated with a hydrogel derived from decellularized porcine dermis (extracellular matrix [ECM] gel) and poly(lactic-co-glycolic acid) (PLGA) microspheres loaded with nitro-oleic acid (NO(2)-OA). NO(2)-OA is an electrophilic fatty acid nitro-alkene derivative that, under hypoxic conditions, induces angiogenesis. This scaffold was utilized to repair a rat abdominal wall partial thickness defect, hypothesizing that the nitro-fatty acid release would facilitate increased angiogenesis at the 8-week endpoint. The quantification of neovascularization was conducted by novel methodologies to assess vessel morphology and spatial distribution. The repaired abdominal wall defects were evaluated by histopathologic methods, including quantification of the foreign body response and cellular ingrowth. The results showed that NO(2)-OA release was associated with significantly improved regional angiogenesis. The combined biohybrid scaffold and NO(2)-OA-controlled release strategy also reduced scaffold encapsulation, increased wall thickness, and enhanced cellular infiltration. More broadly, the three components of the composite scaffold design (ECM gel, polymeric fibers, and PLGA microparticles) enable the tuning of performance characteristics, including scaffold bioactivity, degradation, mechanics, and drug release profile, all decisive factors to better address current limitations in abdominal wall repair or other soft tissue augmentation procedures.

In the present work, we demonstrate that the mesoscopic in-plane mechanical behavior of membrane elastomeric scaffolds can be simulated by replication of actual quantified fibrous geometries. Elastomeric electrospun polyurethane (ES-PEUU) scaffolds, with and without particulate inclusions, were utilized. Simulations were developed from experimentally-derived fiber network geometries, based on a range of scaffold isotropic and anisotropic behaviors. These were chosen to evaluate the effects on macro-mechanics based on measurable geometric parameters such as fiber intersections, connectivity, orientation, and diameter. Simulations were conducted with only the fiber material model parameters adjusted to match the macro-level mechanical test data. Fiber model validation was performed at the microscopic level by individual fiber mechanical tests using AFM. Results demonstrated very good agreement to the experimental data, and revealed the formation of extended preferential fiber orientations spanning the entire model space. We speculate that these emergent structures may be responsible for the tissue-like macroscale behaviors observed in electrospun scaffolds. To conclude, the modeling approach has implications for (1) gaining insight on the intricate relationship between fabrication variables, structure, and mechanics to manufacture more functional devices/materials, (2) elucidating the effects of cell or particulate inclusions on global construct mechanics, and (3) fabricating better performing tissue surrogates that could recapitulate native tissue mechanics.

The aorta possesses a micro-architecture that imparts and supports a high degree of compliance and mechanical strength. Alteration of the quantity and/or arrangement of the main load-bearing components of this micro-architecture - the elastin and collagen fibers - leads to mechanical, and hence functional, changes associated with aortic disease and aging. Therefore, in the future, the ability to rigorously characterize the wall fiber micro-architecture could provide insight into the complicated mechanisms of aortic wall remodeling in aging and disease. Elastin and collagen fibers can be observed using state-of-the-art multi-photon microscopy. Image-analysis algorithms have been effective at characterizing fibrous constructs using various microscopy modalities. The objective of this study was to develop a custom MATLAB-language automated image-based analysis tool to describe multiple parameters of elastin and collagen micro-architecture in human soft fibrous tissue samples using multi-photon microscopy images. Human aortic tissue samples were used to develop the code. The tool smooths, cleans and equalizes fiber intensities in the image before segmenting the fibers into a binary image. The binary image is cleaned and thinned to a fiber skeleton representation of the image. The developed software analyzes the fiber skeleton to obtain intersections, fiber orientation, concentration, porosity, diameter distribution, segment length and tortuosity. In the future, the developed custom image-based analysis tool can be used to describe the micro-architecture of aortic wall samples in a variety of conditions. While this work targeted the aorta, the software has the potential to describe the architecture of other fibrous materials, tube-like networks and connective tissues

Intramyocardial hydrogel injection is an innovative and promising treatment for myocardial infarction (MI) and has recently entered clinical trials. By providing mechanical support to the ventricular wall, hydrogel injectate may act to preserve cardiac function and slow the remodeling process that leads to heart failure. However, improved outcomes will likely depend on the use of hydrogels specifically designed for this unique application, and better understanding of the mechanisms affected by the intervention. In this work, we present the first large animal study achieving functional and geometrical improvements in treating MI using a relatively stiff, fully synthetic hydrogel designed for intramyocardial injection. In addition, the renin-angiotensin system coincided with the mechanical effects of hydrogel injection and attenuated left ventricular remodeling, even after significant hydrogel degradation had occurred in vivo. These results may inspire further optimization of hydrogel materials used in intramyocardial hydrogel injection therapy and a better description of physiologic pathways affected by its implementation to facilitate successful clinical translation.

The basement membrane complex (BMC) is a critical component of the extracellular matrix (ECM) that supports and facilitates the growth of cells. This study investigates four detergents commonly used in the process of tissue decellularization and their effect upon the BMC. The BMC of porcine urinary bladder was subjected to 3% Triton-X 100, 8 mM 3-[(3-cholamidopropyl) dimethylammonio]-1-propanesulfonate (CHAPS), 4% sodium deoxycholate or 1% sodium dodecyl sulfate (SDS) for 24 h. The BMC structure for each treatment group was assessed by immunolabeling, scanning electron microscopy (SEM) and second harmonic generation (SHG) imaging of the fiber network. The composition was assessed by quantification of dsDNA, glycosaminoglycans (GAG) and collagen content. The results showed that collagen fibers within samples treated with 1% SDS and 8 mM CHAPS were denatured, and the ECM contained fewer GAG compared with samples treated with 3% Triton X-100 or 4% sodium deoxycholate. Human microvascular endothelial cells (HMEC) were seeded onto each BMC and cultured for 7 days. Cell-ECM interactions were investigated by immunolabeling for integrin β-1, SEM imaging and semi-quantitative assessment of cellular infiltration, phenotype and confluence. HMEC cultured on a BMC treated with 3% Triton X-100 were more confluent and had a normal phenotype compared with HMEC cultured on a BMC treated with 4% sodium deoxycholate, 8 mM CHAPS and 1% SDS. Both 8 mM CHAPS and 1% SDS damaged the BMC to the extent that seeded HMEC were able to infiltrate the damaged sub-basement membrane tissue, showed decreased confluence and an atypical phenotype. The choice of detergents used for tissue decellularization can have a marked effect upon the integrity of the BMC of the resultant bioscaffold. © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Current extracellular matrix (ECM) derived scaffolds offer promising regenerative responses in many settings, however in some applications there may be a desire for more robust and long lasting mechanical properties. A biohybrid composite material that offers both strength and bioactivity for optimal healing towards native tissue behavior may offer a solution to this problem. A regionally distinct biocomposite scaffold composed of a biodegradable elastomer (poly(ester urethane)urea) and porcine dermal ECM gel was generated to meet this need by a concurrent polymer electrospinning/ECM gel electrospraying technique where the electrosprayed component was varied temporally during the processing. A sandwich structure was achieved with polymer fiber rich upper and lower layers for structural support and an ECM-rich inner layer to encourage cell ingrowth. Increasing the upper and lower layer fiber content predictably increased tensile strength. In a rat full thickness abdominal wall defect model, the sandwich scaffold design maintained its thickness whereas control biohybrid scaffolds lacking the upper and lower fiber-rich regions failed at 8 weeks. Sandwich scaffold implants also showed higher collagen content 4 and 8 weeks after implantation, exhibited an increased M2 macrophage phenotype response at later times and developed biaxial mechanical properties better approximating native tissue. By employing a processing approach that creates a sheet-form scaffold with regionally distinct zones, it was possible to improve biological outcomes in body wall repair and provide the means for further tuning scaffold mechanical parameters when targeting other applications. Copyright © 2013 John Wiley & Sons, Ltd.