Search

In order to improve water and oxygen barrier properties, the surface of two commercial medical grade polyurethane (PU) membranes (Chronoflex® AR-LT and Bionate® II) was modified by a spray deposited film of poly(ethylene-co-vinyl alcohol) (EVOH). The influence of the temperature, the deposited layer thickness and the EVOH ethylene group percentage (27%, 32%, and 44% for EVOH27, EVOH32, and EVOH44, respectively) on the barrier properties of the PU/EVOH multilayered membranes was investigated. The increase of the EVOH layer thickness leads to higher oxygen barrier properties (the highest barrier improvement factor of 412 was obtained). However, in case of the deposited layer thickness higher than 18 μm, microcracks appeared on the treated surface promote a significant loss of the barrier effect. Due to its higher crystallinity degree, EVOH27 provides a higher oxygen barrier effect compared to EVOH32 and EVOH44. On the contrary, an increase of the water barrier properties was observed with the increase of the percentage of ethylene groups. Moreover, the delamination of the EVOH layer was noted after water permeation, especially in case of EVOH44, which is the most hydrophobic layer. Nevertheless, significant decrease of the water and oxygen permeability of the modified PU membranes was achieved, thus showing the benefit of using the EVOH spray deposition for the biomedical application, which requires high performance material with flexible and barrier properties.

Polyurethane (PU) elastomers represent an important class of segmented copolymers. Thanks to many available chemical compositions, a rather broad range of chemical, physical, and biocompatible properties of PU can be obtained. These polymers are often characterized by high tensile and tear strength, elongation, fatigue life, and wear resistance. However, their relatively high permeability towards gases and water as well as their biocompatibility still limits the PU’s practical application, especially for biomedical use, for example, in implants and medical devices. In this review, the barrier and permeability properties of segmented PUs related to their chemical structure and physical and chemical properties have been discussed, including the latest developments and different approaches to improve the PU barrier properties.

One major factor inhibiting natural wound-healing processes is infection through bacterial biofilms, particularly in the case of chronic wounds. In this study, the micro/nanostructure of a wound dressing was optimized in order to obtain a more efficient antibiofilm protein-release profile for biofilm inhibition and/or detachment. A 3D substrate was developed with asymmetric polyhydroxyalkanoate (PHA) membranes to entrap Dispersin B (DB), the antibiofilm protein. The membranes were prepared using wet-induced phase separation (WIPS). By modulating the concentration and the molecular weight of the porogen polymer, polyvinylpyrrolidone (PVP), asymmetric membranes with controlled porosity were obtained. PVP was added at 10, 30, and 50% w/w, relative to the total polymer concentration. The physical and kinetic properties of the quaternary nonsolvent/solvent/PHA/PVP systems were studied and correlated with the membrane structures obtained. The results show that at high molecular weight (Mw = 360 kDa) and high PV...