Search

The spherical Fe3O4 with 300 nm in diameter was synthesized by typical thermal decomposition of Fe (III) organo-metallic precursor in polyol and polyacrylic acid. Fe-nanorods were prepared by reducing Fe (III) nitrate in presence of polyol-hydrazine-CTAB. Morphology and magnetic characterization of the nanoparticles were performed by ESEM, XRD and VSM studies. We performed detailed non-linear magnetorheological properties of three MR fluids (10 vol%) containing isotropic Fe3O4 and anisotropic Fe-nanorods under both small and large amplitude oscillatory flow. The MR samples demonstrated strong magnetorheological Payne effect i.e. rapid stress relaxation under increasing deformation and uniform magnetic field beyond linear viscoelastic region (LVR), which has not been studied in-depth in conventional MR fluids. We have also shown that stress softening was more pronounced for MR fluids with higher anisotropic contents, in contrast to isotropic MR fluid. The onset strains for LVR to non-linear region transition for anisotropic fluids were much lower than that of isotropic spherical nanoparticle-containing fluid. The stronger MR response for nanorod-containing MR fluids can be explained in terms of enhanced field-induced structuration., Comment: Keywords: linear viscoelasticity, large amplitude oscillatory strain, bidisperse MR fluids, magnetorheological Payne effect, stress relaxation, field-induced structuration. 14 pages, 5 figures, journal article

In this paper, we present the study of magnetorheological properties of magnetic fluids containing Co0.9Ni0.1 nanocluster that have been measured as a function of both magnetic field and temperature. Co-rich nanoclusters were synthesized by conventional homogeneous nucleation in liquid polyol. Morphological characterization using FESEM revealed the non-aggregated nature of nanoclusters with an average diameter of 450 nm. Crystal structure and room temperature magnetization measurements were performed by powder XRD and vibrating sample magnetometry (VSM). Two MR samples of different particle volume fractions were prepared. Temperature-dependent steady shear MR characterizations for both the samples in the range of 250C-550C demonstrated systematic decline of MR parameters with increasing temperatures. The temperature-induced thinning of shear stress and viscosity was explained in terms of change in effective volume fraction and magnetic saturation. To analyze the measured variation in MR response with increasing temperature, suitable temperature-sensitive scaling parameters were also constructed. Finally to generalize the trend, rheological master curves were constructed by using time-temperature-field superposition method., Comment: Keywords: Co0.9Ni0.1 nanocluster, temperature-dependent magnetorheology, steady shear, scaling parameters, rheological master curves 23 pages, 8 figures and 2 tables

In this paper we performed steady shear and oscillatory magnetorheological (MR) studies in magnetic fluids containing CoNi nanoclusters of 450 nm in diameter. Co-rich nanoclusters were synthesized by conventional homogeneous nucleation without any external surfactant or reducing agent in liquid polyol at elevated temperature. The x-ray diffraction, energy dispersive X-Ray analysis, scanning and transmission electron microscopy studies were done for analyzing the sample composition and morphology. Two variants of fluid samples were prepared by dispersing 15 vol% and 20 Vol% of CoNi powders in castor oil. Room temperature steady magnetoshear studies indicate viscoplastic behavior with stronger dependence of static yield stress on magnetization than a dipolar coupling that was operational in the dynamic yield stress. Magnetosweep measurements at constant shear rate showed interesting relaxation at high magnetic fields. We also explored dynamical elastic behavior through oscillatory magnetorheological studies under both strain sweep and frequency sweep modes, and showed glass transition like phenomenon occurring in them above critical shear amplitudes., Comment: Keywords: CoNi nanoclusters, magnetorheology, viscoplastic behavior, yield stress, viscous relaxation, multipolar interaction. 21 pages, 11 figures