Search

This paper proposes a novel single-switch quasi-active power factor correction (PFC) converter based on two flyback dc/dc modules. To achieve a high efficiency, part of the input power is directly transferred to the load by the first dc/dc module. The rest of the input power is stored in the dc-bus capacitor and reprocessed by the second dc/dc module. Together, the dc-bus capacitor and the second dc/dc module also serve as a regenerative snubber. Furthermore, a quasi-active PFC circuit is provided to improve the power factor and to ensure the continuous current mode (CCM) operation of the input inductor without the need for sophisticated feedforward sensing and control mechanism. The quasi-active PFC circuit is driven by a magnetic switch, through the tertiary winding of the transformer of the first flyback module. The input current harmonics of the proposed converter meet the IEC 61000-3-2 (Classes A, C, and D) requirements. The dc-bus capacitor voltage is always less than the input voltage regardless of the load condition and is fairly invariant to large variations of the input voltages. High power factor with CCM operation and fast output voltage regulation have been achieved through a single-loop controller. Operating principles, analysis, and experimental results are presented to verify the effectiveness of the proposed converter. [ABSTRACT FROM PUBLISHER]

This paper discusses the major issues that exist in the single-stage ac/dc converters with power factor correction (PFC) and presents a novel converter based on a quasi-active PFC scheme. Two additional windings wound in the transformer of a conventional dc/dc flyback converter are used to drive and achieve continuous current mode operation of an input inductor. In addition, direct energy transfer paths are provided through the additional windings to improve the conversion efficiency and to reduce the dc bus capacitor voltage below 450 V for universal line applications. The proposed converter can be easily designed to comply with IEC 61000-3-2 Class D requirement and to achieve fast output voltage regulation. By properly tuning the converter parameters, a good tradeoff between efficiency, dc bus capacitor voltage stress, and harmonic content can be achieved. Operating principles, analysis, and experimental results of the proposed method are presented. [ABSTRACT FROM PUBLISHER]

This letter presents a novel ac/dc converter based on a quasi-active power factor correction (PFC) scheme. In the proposed circuit, the power factor is improved by using an auxiliary winding coupled to the transformer of a cascade dc/dc flyback converter. The auxiliary winding is placed between the input rectifier and the low-frequency filter capacitor to serve as a magnetic switch to drive an input inductor. Since the dc/dc converter is operated at high-switching frequency, the auxiliary windings produce a high frequency pulsating source such that the input current conduction angle is significantly lengthened and the input current harmonics is reduced. It eliminates the use of active switch and control circuit for PFC, which results in lower cost and higher efficiency. In order to achieve low harmonic content, the input inductor is designed to operate in discontinuous current mode. Operating principles, analysis, and experimental results of the proposed method are presented. [ABSTRACT FROM AUTHOR]

A photovoltaic (PV)-based stand-alone power system is usually used to manage the energy supplied from several power sources such as PV solar arrays and battery and deliver a continuous power to the users in an appropriate form. Traditionally, three different dc/dc converters would have been used. To reduce the cost and improve the power density of the power system, an integrated solution of PV isolated dc/dc three-port converter (TPC) is proposed in this paper. Zero current switching can be achieved for all main diodes and MOSFETs to improve the efficiency, and a continuous input current of solar array is maintained by adding a magnetic switch derived from a fourth winding of the half-bridge transformer. Based on the energy-balancing part formed by boost, the control methods for the single module to realize maximum power point tracking (MPPT), battery charge control, and main bus regulation are proposed. The power system control method for multimodules in parallel is also derived, and the operation of the TPC power system can be transited between conductance mode and MPPT mode automatically. Finally, the experimental results verify that the proposed TPC, together with the proposed control method, meets the requirements of a high-power-density stand-alone PV-battery power system. [ABSTRACT FROM PUBLISHER]

This paper presents a new application of power and voltage balance control schemes for the cascaded H-bridge multilevel inverter (CHMI)-based solid-state transformer (SST) topology. To reduce load on the controller and simplify modulation algorithm, a master–slave control (MSC) strategy is designed for the dual active bridge (DAB) stage. The master controller executes all control and modulation calculations, and the slave controllers manage only device switching and protection. Due to the inherent power and dc-link voltage unbalance in cascaded H-bridge-based SST, this paper presents a compensation strategy based on three-phase dq decoupled current controller. An optimum zero-sequence component is injected in the modulation scheme so that the three-phase grid currents are balanced. Furthermore, to tightly regulate the output voltage of all the DAB modules to target value, a dynamic reference voltage method is also implemented. With this proposed control method, the three-phase grid currents and dc-link voltage in each module can be simultaneously balanced. Finally, simulation and experimental results are presented to validate the performance of the controller and its application to microgrid SST. [ABSTRACT FROM PUBLISHER]

This paper proposes two novel dc/dc choppers with dc circuit breaker functionality for HVDC transmission lines. These converters feature step-up and/or step-down functions with instant interruption of short-circuit faults. Compared to other state-of-the-art converter topologies described in the literature, the proposed topologies have better control functions, lower manufacturing costs and reduced energy losses. A double closed-loop controller is designed to regulate the inductor current and output voltage of the converters. An auxiliary controller is also proposed to ensure proper shut-down of the circuit breaker in the event of dc short-circuit faults. The simulation and experimental results are presented to validate the effectiveness of the proposed converter configurations and control scheme. [ABSTRACT FROM AUTHOR]