Search

Edible films can incorporate antimicrobial extracts to provide microbiological stability on food surfaces. The aim of this study was to evaluate chitosan or starch edible films added by selected concentrations of Mexican oregano (Lippia berlandieri Schauer) essential oil to control anthracnose. Chitosan and starch edible films were formulated with essential oil concentrations of 0.00, 0.25, 0.50, 0.75, 1.00, 2.00, or 4.00%. Mold radial growth was evaluated by modified Gompertz equation. A significant (p < 0.05) change of Gompertz parameters was observed among essential oil concentrations, increasing the lag phase and decreasing radial growth rates as oil concentration increased. [ABSTRACT FROM AUTHOR]

In recent years different emerging technologies have been evaluated such as ultrasound, which is usually combined with other preservation factors in order to increase microbial inactivation. Staphylococcus aureus inactivation was performed by simultaneous application of heat (40, 50, or 60 °C) and low frequency ultrasound (20 kHz) at selected wave amplitudes (60, 75, or 90 µm) in culture broth (aw 0.96, and pH 3.5) with different concentrations of vanillin (200, 350, or 500 mg/kg). Death curves were fitted with the Fermi model. A synergic effect was observed when temperature is near to 40 °C at different ultrasonic amplitude waves and vanillin concentrations. Several studied combinations of ultrasound, temperature, and vanillin concentration could be applied in the food industry. En los ultimos anos se han evaluado diversas tecnologias emergentes como el ultrasonido, el cual es combinado con otros factores de conservacion para aumentar su eficacia para la inactivacion microbiana. La inactivacion de Staphylococcus aureus, se llevo a cabo aplicando simultaneamente temperatura (40, 50 o 60 °C), ultrasonido de baja frecuencia (20 kHz) con diferentes amplitudes de onda (60, 75 o 90 µm), y diferentes concentraciones de vainillina (200, 350 o 500 mg/kg) como antimicrobiano, en medios de cultivo con aw 0,96 y pH 3,5. Se modelaron las curvas de muerte con el modelo de Fermi. Se encontro un efecto sinergico de los factores estudiados, especialmente a temperaturas cercanas a 40 °C con diferentes amplitudes de onda ultrasonicas y concentraciones de vainillina. Los resultados obtenidos demuestran que varias de las combinaciones estudiadas podrian tener aplicacion en la industria de alimentos. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the antimicrobial effect of thymol and carvacrol in inhibiting Escherichia coli and Salmonella serovar Typhimurium inoculated on a fresh green salad through the vapor phase. A film-forming solution was prepared by dissolving starch, sorbitol, and variying concentrations of carvacrol, thymol, and a mixture of both. The film-forming solution containing the respective antimicrobial agent was then added lid, which was sealed rigidly and hermetically to achieve different concentrations (105 mg/L of air of carvacrol, 105 mg/L of air of thymol, and a mixture of 52 mg/L of air of carvacrol and 52 mg/L of air of thymol). Each active package contained fresh green salad inoculated with E. coli or Salmonella serovar Typhimurium. The active packages were then sealed and refrigerated at a temperature of 6 °C for 48 h. Growth/inhibition curves were modelled using the Weibull equation, and consumer acceptance was evaluated. Carvacrol can reduce up to 0.5 log-cycles, while thymol can reach almost 1 log cycle. Blending the components with half the concentration has a synergistic effect, inhibiting up to 2.5 log cycles. Consumer ratings revealed no significant differences between the packages. However, the average score was 5.4 on a 9-point hedonic scale, evaluators' comments did not indicate dislike or a strong taste characteristic of thymol and carvacrol., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interestsRaul Avila-Sosa reports administrative support was provided by Benemérita Universidad Autónoma de Puebla. Raul Avila-Sosa reports a relationship with Benemérita Universidad Autónoma de Puebla that includes: employment and non-financial support., (© 2024 The Author(s).)

Tomato is one of the most important fruits worldwide. It is widely consumed due to its sensory and nutritional attributes. However, like many other industrial crops, it is affected by biotic and abiotic stress factors, reducing its metabolic and physiological processes. Tomato plants possess different mechanisms of stress responses in which hormones have a pivotal role. They are responsible for a complex signaling network, where the antioxidant system (enzymatic and non-enzymatic antioxidants) is crucial for avoiding the excessive damage caused by stress factors. In this sense, it seems that hormones such as ethylene, auxins, brassinosteroids, and salicylic, jasmonic, abscisic, and gibberellic acids, play important roles in increasing antioxidant system and reducing oxidative damage caused by different stressors. Although several studies have been conducted on the stress factors, hormones, and primary metabolites of tomato plants, the effect of endogenous and/or exogenous hormones on the secondary metabolism is still poorly studied, which is paramount for tomato growing management and secondary metabolites production. Thus, this review offers an updated overview of both endogenous biosynthesis and exogenous hormone application in the antioxidant system of tomato plants as a response to biotic and abiotic stress factors.

This review aims to evaluate the state of saffron's main bioactive compounds and their relationship with its commercial quality. Saffron is the commercial name for the dried red stigmas of the Crocus sativus L. flower. It owes its sensory and functional properties mainly to the presence of its carotenoid derivatives, synthesized throughout flowering and also during the whole production process. These compounds include crocin, crocetin, picrocrocin, and safranal, which are bioactive metabolites. Saffron's commercial value is determined according to the ISO/TS3632 standard that determines their main apocatotenoids. Other techniques such as chromatography (gas and liquid) are used to detect the apocarotenoids. This, together with the determination of spectral fingerprinting or chemo typing are essential for saffron identification. The determination of the specific chemical markers coupled with chemometric methods favors the discrimination of adulterated samples, possible plants, or adulterating compounds and even the concentrations at which these are obtained. Chemical characterization and concentration of various compounds could be affected by saffron's geographical origin and harvest/postharvest characteristics. The large number of chemical compounds found in the by-products (flower parts) of saffron (catechin, quercetin, delphinidin, etc.) make it an interesting aromatic spice as a colorant, antioxidant, and source of phytochemicals, which can also bring additional economic value to the most expensive aromatic species in the world.

Saffron is derived from the stigmas of the flower Crocus sativus L. The drying process is the most important post-harvest step for converting C. sativus stigmas into saffron. The aim of this review is to evaluate saffron's post-harvest conditions in the development of volatile compounds and its aroma descriptors. It describes saffron's compound generation by enzymatic pathways and degradation reactions. Saffron quality is described by their metabolite's solubility and the determination of picrocrocin, crocins, and safranal. The drying process induce various modifications in terms of color, flavor and aroma, which take place in the spice. It affects the aromatic species chemical profile. In the food industry, saffron is employed for its sensory attributes, such as coloring, related mainly to crocins (mono-glycosyl esters or di-glycosyl polyene).

The aim of this work was to evaluate the in vitro and in vivo effectiveness of thymol and carvacrol added to edible starch films and coatings against Colletotrichum gloeosporioides . In vitro evaluation consisted of determining minimal inhibitory concentration (MIC) of carvacrol and thymol was determined at different pH values against Colletotrichum gloeosporioides . With MIC values, binary mixtures were developed. From these results, two coatings formulations were in vivo evaluated on mango and papaya. Physicochemical analysis, color change, fruit lesions and C. gloeosporioides growth were determined during storage. In vitro assay indicated that the MIC value of carvacrol and thymol against C. gloeosporioides was 1500 mg/L at pH 5. An additive effect was determined with 750/750 and 1125/375 mg/L mixtures of carvacrol and thymol, respectively. Coated fruits with selected mixtures of carvacrol and thymol presented a delay in firmness, maturity index and color change. Moreover, a fungistatic effect was observed due to a reduction of lesions in coated fruits. These results were corroborated by the increase in the lag phase value and the reduction of the growth rate. Carvacrol and thymol incorporated into edible films and coatings are able to reduce the incidence of anthracnose symptoms on mango and papaya.

The aim of this study was to evaluate the structural, physical, and antifungal characteristics of starch edible films added with nanocomposites and Mexican oregano ( Lippia berlandieri Schauer) essential oil (EO). Starch edible films were formulated with Mexican oregano EO (0%, 1%, or 2% v / v ) and bentonite or halloysite (2%). Physical properties such as L * (luminosity), hue, film thickness, and O 2 and CO 2 permeability were determined. Structural analysis was carried out via atomic force microscopy (AFM). Antifungal activity against Aspergillus niger, Fusarium spp., and Rhizopus spp. was evaluated. The addition of EO and nanocomposites reduced luminosity, providing color to the edible films. Film thickness increased through the addition of EO concentration. O 2 and CO 2 permeability was increased by bentonite/EO films, and for halloysite films, CO 2 permeability decreased as EO concentration increased. The addition of EO with both nanocomposites shows an evident morphological change in film structure, decreasing pore density and increasing pore size. In general, Mexican oregano EO added to edible starch films has an adequate fungicidal effect. The most sensitive microorganism tested was A. niger. Edible films added with Mexican oregano EO and nanocomposites show better physical and antifungal properties due to an adequate structural change in the biopolymer matrix.

Brazil, Colombia, Ecuador, Peru, Bolivia, Venezuela, Suriname, Guyana, and French Guiana share an area of 7,295,710 km 2 of the Amazon region. It is estimated that the Amazonian forest offers the greatest flora and fauna biodiversity on the planet and on its surface could cohabit 50% of the total existing living species; according to some botanists, it would contain about 16-20% of the species that exist today. This region has native fruit trees in which functional properties are reported as antioxidant and antiproliferative characteristics. Amazon plants offer a great therapeutic potential attributed to the content of bioactive phytochemicals. The aim of this mini review is to examine the state of the art of the main bioactive components of the most studied Amazonian plants. Among the main functional compounds reported were phenolic compounds, unsaturated fatty acids, carotenoids, phytosterols, and tocopherols, with flavonoids and carotenoids being the groups of greatest interest. The main beneficial effect reported has been the antioxidant effect, evaluated in most of the fruits investigated; other reported functional properties were antimicrobial, antimutagenic, antigenotoxic, analgesic, immunomodulatory, anticancer, bronchodilator, antiproliferative, and anti-inflammatory, including hypercholesterolemic effects, leishmanicidal activity, induction of apoptosis, protective action against diabetes, gastroprotective activity, and antidepressant effects.

The aim of this study was to evaluate the antifungal activity (in vitro) of thymol and carvacrol alone or in mixtures against Fusarium verticillioides and Rhizopus stolonifer, and to obtain primary growth models. Minimal inhibitory concentration (MIC) was evaluated with fungal radial growth with thymol or carvacrol concentrations (0-1600mg/l). Mixtures were evaluated using concentrations below MIC values. Radial growth curves were described by the modified Gompertz equation. MIC values of carvacrol were 200mg/l for both fungi. Meanwhile, MIC values of thymol were between 500 and 400mg/l for F. verticillioides and R. stolonifer, respectively. A synergistic effect below MIC concentrations for carvacrol (100mg/l) and thymol (100-375mg/l) was observed. Significant differences (p<0.05) between the Gompertz parameters for the antimicrobial concentrations and their tested mixtures established an inverse relationship between antimicrobial concentration and mycelial development of both fungi. Modified Gompertz parameters can be useful to determine fungistatic concentrations., (Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.)

Antimicrobial agents can be incorporated into edible films to provide microbiological stability, since films can be used as carriers of a variety of additives to extend product shelf life and reduce the risk of microbial growth on food surfaces. Addition of antimicrobial agents to edible films offers advantages such as the use of small antimicrobial concentrations and low diffusion rates. The aim of this study was to evaluate inhibition by vapor contact of Aspergillus niger and Penicillium digitatum by selected concentrations of Mexican oregano (Lippia berlandieri Schauer), cinnamon (Cinnamomum verum) or lemongrass (Cymbopogon citratus) essential oils (EOs) added to amaranth, chitosan, or starch edible films. Essential oils were characterized by gas chromatography-mass spectrometry (GC/MS) analysis. Amaranth, chitosan and starch edible films were formulated with essential oil concentrations of 0.00, 0.25, 0.50, 0.75, 1.00, 2.00, or 4.00%. Antifungal activity was evaluated by determining the mold radial growth on agar media inoculated with A. niger and P. digitatum after exposure to vapors arising from essential oils added to amaranth, chitosan or starch films using the inverted lid technique. The modified Gompertz model adequately described mold growth curves (mean coefficient of determination 0.991 ± 0.05). Chitosan films exhibited better antifungal effectiveness (inhibition of A. niger with 0.25% of Mexican oregano and cinnamon EO; inhibition of P. digitatum with 0.50% EOs) than amaranth films (2.00 and 4.00% of cinnamon and Mexican oregano EO were needed to inhibit the studied molds, respectively). For chitosan and amaranth films a significant increase (p<0.05) of lag phase was observed among film concentrations while a significant decrease (p<0.05) of maximum specific growth was determined. Chitosan edible films incorporating Mexican oregano or cinnamon essential oil could improve the quality of foods by the action of the volatile compounds on surface growth of molds., (Copyright © 2011. Published by Elsevier B.V.)

Edible films can incorporate antimicrobial agents to provide microbiological stability, since they can be used as carriers of a wide number of additives that can extend product shelf life and reduce the risk of pathogenic bacteria growth on food surfaces. Addition of antimicrobial agents to edible films offers advantages such as the use of low antimicrobial concentrations and low diffusion rates. The aim of this study was to evaluate inhibition of Aspergillus niger and Penicillium spp. by selected concentrations of Mexican oregano (Lippia berlandieri Schauer) essential oil added to amaranth, chitosan, or starch edible films. Oregano essential oil was characterized by gas chromatography-mass spectrometry (GC/MS) analysis. Amaranth, chitosan, and starch edible films were formulated with essential oil concentrations of 0%, 0.25%, 0.50%, 0.75%, 1%, 2%, and 4%. Mold radial growth was evaluated inoculating spores in 2 ways: edible films were placed over inoculated agar, Film/Inoculum mode (F/I), or the edible films were first placed in the agar and then films were inoculated, Inoculum/Film mode (I/F). The modified Gompertz model adequately described growth curves. There was no significant difference (P > 0.05) in growth parameters between the 2 modes of inoculation. Antifungal effectiveness of edible films was starch > chitosan > amaranth. In starch edible films, both studied molds were inhibited with 0.50% of essential oil. Edible films added with Mexican oregano essential oil could improve the quality of foods by controlling surface growth of molds.