Search

In this research, thermal modeling has been done to investigate the effect of nanofluid on the performance of the linear parabolic collector. Therminol vapor/liquid phase fluid (VP-1) has been used as a base fluid; iron oxide nanoparticles have been used to produce mono-nanofluid; and iron oxide multi-walled carbon nanotubes nanocomposite has been used as nanoparticles to produce hybrid nanofluid. The fluid flow inside the absorber tube of the collector is assumed to be turbulent. The results show that when hybrid nanofluid and mono-nanofluid are used, the energy and exergy efficiencies of the collector are higher than those for the conditions of using the base fluid, but their amount is slightly lower with the use of hybrid nanofluid than when the working fluid is mono-nanofluid. According to the obtained results, the highest energy efficiency of the linear parabolic collector using nanofluid and mono-nanofluid is 70.2% and 70.4%, respectively, and the highest exergy efficiency is 35.7% and 35.9%, respectively. Despite this, the friction coefficient of mono-nanofluid compared to hybrid nanofluid was obtained on average about 9% higher. The results showed that the criterion for evaluating the performance of the collector (hydrodynamic thermal efficiency) when hybrid nanofluid is used is more than when mono-nanofluid is used. [ABSTRACT FROM AUTHOR]

Hybrid nanofluids are employed to enhance the antibacterial effect produced by solar radiation. Antimicrobial properties are present in metal nanoparticles (such as silver, copper, or zinc) or metal oxides (such as titanium dioxide or zinc oxide) when exposed to solar radiation. Nanomaterials that have antimicrobial properties are selected from the available literature. A solar sheet with an inclined plane has been chosen and filled with tri‐hybrid nanofluids (THNFs). Hybrid nanofluids including (CuO), Copper oxide, TiO2 (Titanium oxide), and SiO2 (Silicon dioxide), are selected from metal and metal oxide classes including water as a base fluid. The antimicrobial action caused by solar radiation is enhanced by the slip boundaries and variable porous space. The influence of flow and thermal fields on isotherms, velocities, flow lines, and Nusselt numbers are considered. The transformed system of differential equations is solved by the Control Volume Finite Element Method (CVFEM) and RK‐4 technique. The nanoparticulate volume fraction of CuO, TiO2, and SiO2 is largely responsible for the enhancement in the heat transfer rate (HT), as observed. Improved thermal performance is achieved through the flow of THNFs, which in turn acts as an antimicrobial agent. Increasing values of (ϕ=ϕ1+ϕ2+ϕ3,M,Ec,Rd,Q)$(\phi = {\phi }_1 + {\phi }_2 + {\phi }_3,M,Ec,Rd,Q)$ parameters lead to an improvement in the heat transfer rate, which in turn decreases microbial activity. [ABSTRACT FROM AUTHOR]

This study examines the generation of irreversibility and the behavior of stagnation point hybrid nanofluid flow on a Riga plate. The effects of nonlinear thermally convective and solar radiation are incorporated in the modeled equations. The nanoparticles of (Cu) and (Al2O3) are mixed with Glycol (C3H8O2) to hybridized it. The leading equations have been changed to dimension-free form by using the set of appropriate variables and then have been evaluated by Artificial Neural Network (ANN) approach. It is revealed in this work that, the velocity panels are amplified with expansion in Grashof number and electromagnetic factor while declined with escalation in magnet/electrode factor and nanoparticles concentration. Upsurge, in Eckert number for both the scenarios (Ec < 0) and (Ec > 0), the radiation factor and nanoparticles concentration cause augmentation in thermal characteristics. Radiation factor has positive impacts on Bejan number and generation of Entropy. Moreover, Bejan number is retarded while entropy is augmented with growth in Brinkman number. It is also established in this work that the principle of entropy generation for hybrid nanoparticles supports the efficient delivery of drug in cancer treatment. [ABSTRACT FROM AUTHOR]

Hybrid nanofluids are capable of being used as a carrier for delivering drugs to targeted areas in the body. For this purpose, the Casson hybrid nanofluids (HNFs) flow is suggested between the gap of two tubes. The study involves analyzing blood-based hybrid nanofluids (HNFs) that consist of silver (Ag) and titanium dioxide (TiO2) nanoparticles for applications of drug delivery. Titanium oxide nanoparticles, or TiO2 NPs, have strong photoactivity, low toxicity, and excellent biocompatibility, making them promising candidates for cancer treatment. The attractiveness of silver nanoparticles (AgNPs) for cancer therapy is due to their unique properties. Graphic representations are provided based on the simulations of non-dimensional velocity, temperature, and skin friction under physical parameter variations, for the applications of drug delivery are investigated and discussed. The control volume finite element method (CVFEM), is used to solve the problem. The new strategy of artificial neural networks (ANN) is also used to solve the transform equations. Nanoparticles increase drug stability and extend shelf life by protecting them from degradation or inactivation. [ABSTRACT FROM AUTHOR]