Search

Abstract Plants are subjected to various biotic and abiotic stresses that significantly impact their growth and productivity. To achieve balanced crop growth and yield, including for leafy vegetables, the continuous application of micronutrient is crucial. This study investigates the effects of different concentrations of copper sulphate (0, 75, 125, and 175 ppm) on the morphological and biochemical features of Spinacia oleracea and Avena sativa. Morphological parameters such as plant height, leaf area, root length, and fresh and dry weights were optimized at a concentration of 75 ppm copper sulfate. At this concentration, chlorophyll a & b levels increased significantly in Spinacia oleracea (462.9 and 249.8 𝜇𝑔/𝑔), and Avena sativa (404.7 and 437.63𝜇𝑔/𝑔). However, carotenoid content and sugar levels in Spinacia oleracea were negatively affected, while sugar content in Avena sativa increased at 125 ppm (941.6 µg/ml). Protein content increased in Spinacia oleracea (75 ppm, 180.3 µg/ml) but decreased in Avena sativa. Phenol content peaked in both plants at 75 ppm (362.2 and 244.5 µg/ml). Higher concentrations (175 ppm) of copper sulfate reduced plant productivity and health. Plants exposed to control and optimal concentrations (75 and 125 ppm) of copper sulpate exhibited the best health and growth compared to those subjected to higher concentrations. Maximum plant height, leaf area, root length, fresh and dry weights were observed at lower concentrations (75 and 125 ppm) of copper sulfate, while higher concentrations caused toxicity. Optimal copper sulfate levels enhanced chlorophyll a, chlorophyll b, total chlorophyll, protein, and phenol contents but inhibited sugar and carotenoid contents in both Spinacia oleracea and Avena sativa. Overall, increased copper sulfate treatment adversely affected the growth parameters and biochemical profiles of these plants.

Abstract Green synthesis is an easy, safe, and environmentally beneficial nanoparticle creation method. It is a great challenge to simultaneously improve the capping and stabilizing agent carrier separation efficiency of photocatalysts. Herein, Zn-doped Titanium dioxide (TiO2) nanoparticles with high exposure of 360 nm using a UV/visible spectrophotometer were prepared via a one-step hydrothermal decomposition method. A detailed analysis reveals that the electronic structures were modulated by Zn doping; thus, the responsive wavelength was extended to 600 nm, which effectively improved the visible light absorption of TiO2. We have optimized the different parameters like concentration, time, and temperature. The peak for TiO2 is located at 600 cm-1 in FTIR. A scanning electron microscope revealed that TiO2 has a definite shape and morphology. The synthesized Zn-doped TiO2NPs were applied against various pathogens to study their anti-bacterial potentials. The anti-bacterial activity of Zn-doped TiO2 has shown robust against two gram-ve bacteria (Salmonella and Escherichia coli) and two gram + ve bacteria (Staphylococcus epidermidis and Staphylococcus aureus). Synthesized Zn-doped TiO2 has demonstrated strong antifungal efficacy against a variety of fungi. Moreover, doping TiO2 nanoparticles with metal oxide greatly improves their characteristics; as a result, doped metal oxide nanoparticles perform better than doped and un-doped metal oxide nanoparticles. Compared to pure TiO2, Zn-doped TiO2 nanoparticles exhibit considerable applications including antimicrobial treatment and water purification.

Melatonin (MT) participates in plants' responses in plants’ response to cadmium (Cd) tolerance, although its work model remains elusive. Here, the function of MT in adjusting Cd accumulation in Gossypium hirsutum (CCRI12) was investigated. In this research we observed that exogenous 50 μM MT significantly reduced the Cd accumulation under 100 μМ Cd stress for 7 days of treatment in cotton seedlings. Cd markedly induced the ROS (H2O2, O2-) accumulation and elevated the expression of transporters for Cd uptake and translocation. After application of MT reduced ROS and MDA accumulation in response to high induction of antioxidant defense system; the genes encoding superoxide dismutase (GhSOD), catalase (GhCAT), and peroxidase (GhPOD), ascorbate peroxidase (GhAPX), and glutathione S-transferase (GhGST) were significantly upregulated accompanied by their level of content. Furthermore, MT down-regulated transporters for Cd uptake include Natural Resistance-Associated Macrophage Protein 1 (GhNRAMP3), Zinc/Iron-regulated transporter-like protein (GhZIP1/4/6), Heavy Metal ATPase gene (GhHMA2), and ATP-binding Cassette sub family C (GhABCC3/2). Exogenous application of MT raised the hemicelluloses, cellulose and pectin content accompanied by their expression levels, xyloglucan endotransglucosylase/hydrolase (GhXTH28/6/9/B), cellulose synthase like (GhCSLG1/2) and COBRA-like (GhCOBL4), pectin acetylesterases (GhPAE8/7), pectin methylesterases (GhPME31) which in turn increased the cell wall's binding capacity to Cd.

Bisphenol A (BPA) is a synthetic organic compound used as raw material in many industrial products, particularly epoxy resins and polycarbonate plastics. Due to its extensive applications, increasing contamination in the environment and adverse effects on living organisms, BPA has been regarded as a pollutant of emerging concern. In aquatic environments, it has been detected ubiquitously in concentrations ranging from few ng L−1 to several µg L−1. BPA has been found toxic to a number of aquatic organisms from diverse taxa at all trophic levels. In terms of photosynthetic organisms, a complex interplay occurs between BPA and algae. BPA adversely affects algae by inhibiting several physiological and biochemical processes; at the same time, algae potentially biodegrade and/or remediate the environmental BPA. In this review article these complex interactions between algae and BPA are elaborated. The effects of BPA on different parameters of algae including growth, light-harvesting pigments, photosynthesis, respiration, morphology and macromolecules are discussed. Considering the reported EC50/IC50 values of BPA for algae growth and following the criteria of the EU-Directive 93/67/EEC for classifying aquatic pollutants, BPA can be classified as toxic and harmful to algae (having EC50 in the range of 1–10 and 10–100 mg L−1). The oxidative stress caused by BPA resulting in lipids peroxidation of cellular membranes is the most possible cause of BPA toxicity in algae. In addition, the abilities of different algae to remove BPA by adsorption, accumulation and biodegradation are also compared and discussed. Algae remove BPA from water mainly by biodegrading it with monohydroxy-BPA and BPA-glycosides as the most common intermediates. Algae generally remove BPA more efficiently at low doses of BPA (lower than 1 mg L−1) but increase in the concentration of BPA greatly reduces the biodegradation efficiency of algae. For an in-depth understanding, the molecular responses of algae to BPA exposure are reviewed. This manuscript provides comprehensive information on the subject matter that would be useful for both academia and policy makers working in this domain.

Pinus is one of the most economical and ecological important conifers, model specie for studying sequence divergence and molecular phylogeney of gymnosperms. The less availability of information for genome resources enable researchers to conduct evolutionary studies of Pinus species. To improve understanding, we firstly reported, previously released chloroplast genome of 72 Pinus species, the sequence variations, phylogenetic relationships and genome divergence among Pinus species. The results displayed 7 divergent hotspot regions (trnD-GUC, trnY-GUA, trnH-GUG, ycf1, trnL-CAA, trnK-UUU and trnV-GAC) in studied Pinus species, which holds potential to utilized as molecular genetic markers for future phylogenetic studies in Pinnus species. In addition, 3 types of repeats (tandem, palindromic and dispersed) were also studied in Pinus species under investigation. The outcome showed P. nelsonii had the highest, 76 numbers of repeats, while P. sabiniana had the lowest, 13 13 numbers of repeats. It was also observed, constructed phylogenetic tree displayed division into two significant diverged clades: single needle (soft pine) and double-needle (hard pine). Theoutcome of present investigation, based on the whole chloroplast genomes provided novel insights into the molecular based phylogeny of the genus Pinus which holds potential for its utilization in future studies focusing genetic diversity in Pinnus species.

The dramatic increase in healthcare costs has become a significant burden to this era. Many patients are unable to access medication because of the high price of drugs. Genetic engineering has made advances to increase the yield, titer, and productivity in the bio-based production of chemicals, materials of interest, and identification of innovative targets for drug discovery. Currently, the production of homoglutamate (α-Aminoadipic acid) involves petrochemical routes that are costly with low yield and often not suitable for industrial production. Here, we established the development of NADH-dependent homoglutamate by engineering NADH-dependent phenylalanine dehydrogenase (PDH) from Thermoactinomyces intermedius, which provides a novel tool for in-vivo metabolic engineering and in-vitro catalysis. Based on computational insight into the structure, we proposed the site-specific directed mutagenesis of the two important residues of PDH through docking simulations by AutoDock Vina which elucidated the binding mode of PDH with α-Ketoadipic acid and ligands. Our results demonstrated that the catalytic efficiency Km/Kcat of the final mutant Ala135Arg showed a 3-fold increase amination activity towards the ketoadipic acid as compared to the other mutant Gly114Arg, a double mutant Gly114Arg/Ala135Arg, and wild type TiPDH. Furthermore, we have introduced formate dehydrogenase as a cofactor regenerative system in this study which further made this study economically viable. Our study unfolds the possibility of biosynthesis of other non-proteinogenic amino acids that might be valuable pharmaceutical intermediaries.

Polyethylenimines (PEIs), a group of polycationic molecules, are known to impair the outer membrane of Gram-negative bacteria and exhibit antimicrobial activity. The outer membrane of Gram-negative strains hinders the uptake of photosensitizer chlorophyllin. In this study, we report chlorophyllin and branched PEI combinations’ activity against Escherichia coli strains DH5α and RB791, Salmonella enterica sv. Typhimurium LT2, and Bacillus subtilis 168. The minimal bactericidal concentration (MBC) was determined by plating cells treated with different concentrations of PEI and chlorophyllin on agar and monitoring their growth after 24 h. All tested combinations of PEI and chlorophyllin were lethal for S. enterica after 240 min of incubation in light, whereas PEI alone (−1) was ineffective. In the darkness, complete inhibition was noted with a combination of ≥2.5 µg mL−1 chlorophyllin and 50 µg mL−1 PEI. If applied alone, PEI alone of ≥800 µg mL−1 of PEI was required to completely inactivate E. coli DH5α cells in light, whereas with ≥5 µg mL−1 chlorophyllin, only ≥100 µg mL−1 PEI was needed. No effect was detected in darkness with PEI alone. However, 1600 µg mL−1 PEI in combination with 2.5 µg mL−1 resulted in complete inactivation after 4 h dark incubation. PEI alone did not inhibit E. coli strain RB791, while cells were inactivated when treated with 10 µg mL−1 chlorophyllin in combination with ≥100 µg mL−1 (in light) or ≥800 µg mL−1 PEI (in darkness). Under illumination, B. subtilis was inactivated at all tested concentrations. In the darkness, 1 µg mL−1 chlorophyllin and 12.5 µg mL−1 PEI were lethal for B. subtilis. Overall, PEI can be used as an antimicrobial agent or potentiating agent for ameliorating the antimicrobial activity of chlorophyllin.

Health assumptions to the population due to the utilization of contaminated vegetables have been a great concern all over the world. In this study, an investigation has been conducted to ascertain metal concentrations in the wastewater, soil and commonly consumed vegetables from the vicinity of Gadoon Industrial Estate Swabi, Khyber Pakhtunkhwa Pakistan. Physicochemical parameters such as pH, electrical conductivity (EC), total dissolved solids (TDS), total suspended solids (TSS) and total solids (TS) and heavy metals such as Pb, Cr, Cd, Ni, Zn, Cu, Fe, Mn were determined using Atomic Absorption Spectrophotometer (AAS). Moreover, possible health risks due to the consumption of vegetables have also been estimated. pH and TSS in wastewater were found to be higher than the permissible limit set by WHO (1996). These results revealed that Cr concentration in the wastewater was above the permissible limits of United States Environmental Protection Agency (USEPA) which may lead to a detrimental effect on soil quality deterioration, ultimately leading to food contamination. ANOVA analysis demonstrated a significant difference in soil samples for Pb, Cr, Cd, Ni, Zn and Cu at p ≤ 0.001, for Mn at p ≤ 0.05 while no significant difference was observed for Fe respectively. ANOVA analysis also exhibited the highest mean value for Pb, Cr, Cd and Zn in vegetables. A substantial positive correlation was found among the soil and vegetable contamination. The transfer factor for Cr, Pb, Zn, Mn, Ni, Cd and Cu was greater than 0.5 due to contamination caused by domestic discharges and industrial effluents. Health assessment via consumption of dietary vegetables revealed a higher level than the permissible limit (HRI > 1) for Pb and Cd in children and adults. Enrichment factor (EF) due to consumption of vegetables was found higher for Pb and Cr respectively. Based on the findings of this study, there would be a significant risk to the consumers associated with consumptions of vegetables being cultivated in Gadoon Industrial Estate area of district Swabi. Therefore, strict regulatory control measures are highly recommended for the safety of vegetables originated from the study area.

In this research, eight local mung bean (Vigna radiata) varieties were analyzed for their performance against two levels of CdCl2 solution (0.3 and 0.5 mM) alone and priming with gibberellic acid (GA3) (100 μM), salicylic acid (SA) (50 μM) and proline (5 mM) solution prior to Cd exposure. Mung bean seedlings were analyzed for disturbance in cytological, morphological, biochemical and enzymatic parameters under cadmium stress. For cytological studies, 48 h grown mung bean seedlings root tips were used to prepare slides and studied for percent mitotic index (MI%) and to calculate percent C-mitosis, laggard, sticky and fragmented chromosomes, pictures were captured by a Nikon camera (DS-Fi 1 Japan) attached with a microscope. One-week grown mung seedlings were studied for growth traits, malondialdehyde (MDA), protein, proline and antioxidant enzymes. ANOVA and DMR test of this research revealed that all the tested mung bean varieties and treatments were significantly different regarding mitotic index and number of chromosomal aberrations. Both the Cd treatments exhibited increased total chromosomal aberrations with different types and a maximum decrease in MI%. In pretreated samples, GA3, SA and proline serve as mitigating agents that reduce mutagenic effects of Cd in mung bean by increasing MI% and decreasing chromosomal aberrations as compared to non-pretreated samples. Both the Cd treatments showed a decrease in all growth traits. Total proteins were also found to be significantly reduced in a dose-dependent manner in all genotypes. Cd treatment increased the activities of all antioxidant enzymes tested. Cd caused oxidative damage as indicated by elevated levels of MDA content in treated samples in comparison to control. Proline content levels were also high in Cd treated seedlings indicating stress. Results demonstrated that pretreatment with phytohormones and proline before Cd were found to improve all morphological parameters, by altering antioxidant enzymes activities along with a decrease in MDA and proline contents as well. It was further noticed that the performance of GA3 was better at 0.3 mM Cd treatment while SA was found to be a good mitigating agent at 0.5 mM Cd stress in all tested mung bean varieties. This research concluded less deleterious effects of Cd on AZRI-2006 while more sensitivity to NM-51 towards Cd. Priming with phytohormones and proline is a user-friendly, economical, and simple mitigation strategy to reduce Cd toxicity in plants and get better yield from contaminated lands.

Background & aimHepatitis B and C infections are global issues that are associated with a massive financial burden in developing countries where vertical transmission is the major mode and remains high. This cross-sectional study was designed to investigate the seroepidemiology and associated risk factors of hepatitis B virus (HBV) and hepatitis C virus (HCV) infections among 375 pregnant women attending antenatal care health facilities at Bacha Khan Medical Complex (BKMC) Shahmansoor and District Head Quarter (DHQ) Hospital Swabi, Khyber Pakhtunkhwa, Pakistan.MethodologyFrom a total of 375 pregnant women selected using systematic random sampling from both hospitals, 10 ml of blood samples were collected and alienated serum was examined for indicators identification through the Immuno-Chromatographic Test (ICT) and 3rd Generation Enzyme-Linked Immunosorbent Assay (ELISA). A pre-structured questionnaire was used to collect the socio-demographic data and possible risk factors. The data was analyzed via SPSS 23.0 statistical software. A chi-square analysis was performed to determine the association between variables. P-value < 0.05 was set statistically significant.ResultsThe overall frequency of HBV and HCV among 375 pregnant women involved in the study was 3.7% and 2.1% respectively. None of the pregnant women were co-infected with HBV and HCV. Dental extraction (P = 0.001) and blood transfusion (P = 0.0005) were significantly allied with HBV infection while surgical procedure (P = 0.0001) was significantly associated with HCV infection. Moreover the sociodemographic characteristics: residential status (P = 0.017) and educational level (P = 0.048) were found significant risk factors of HBsAg and maternal age (P = 0.033) of anti-HCV, respectively.Conclusion & recommendationHBV and HCV infections are intermediary endemic in the study area. A higher prevalence of HBV was detected among pregnant mothers with a history of dental extraction, history of blood transfusion, resident to the urban area and low educational level. The age and surgical procedures were the potential risk factors found significantly associated with HCV positivity among pregnant mothers in our setup. Future negotiations to control vertical transmission should include routine antenatal screening for these infections early in pregnancy and the requirement of efficient preventive tools including the birth dose of the hepatitis B vaccine in combination with hepatitis B immune globulins to the neonate.

Abstract Background Medicinal plants are rich source of traditional herbal medicine around the globe. Most of the plant’s therapeutic properties are due to the presence of secondary bioactive compounds. Methods The present study analyzed the High Pressure Liquid Chromatography (HPLC) fractions of Puncia granatum (peel) extracts (aqueous, chloroform, ethanol and hexane) against multidrug resistant bacterial pathogens (Acinetobacter baumannii, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus). All the fractions having antibacterial activity was processed for bioactive compounds identification using LC MS/MS analysis. Results Among total HPLC fractions (n = 30), 4 HPLC fractions of P. granatum (peel) showed potential activity against MDR pathogens. Fraction 1 (F1) and fraction 4 (F4) collected from aqueous extract showed maximum activity against P. aeruginosa. Fraction 2 (F2) of hexane showed antibacterial activity against three pathogens, while ethanol F4 exhibited antibacterial activity against A. baumannii. The active fractions were processed for LC MS/MS analysis to identify bioactive compounds. Valoneic acid dilactone (aqueous F1 and F4), Hexoside (ethanol F4) and Coumaric acid (hexane F2) were identified as bioactive compounds in HPLC fractions. Conclusion Puncia granatum peel extracts HPLC fractions exhibited potential inhibitory activity against MDR bacterial human pathogens. Several bioactive compounds were identified from the HPLC fractions. Further characterization of these compounds may be helpful to conclude it as therapeutic lead molecules against MDR pathogens.

The use of synthetic pesticides to control pests and increase crops yield is a common practice, but they cause several environmental and health problems. Therefore, there is a need to explore alternative approaches to reduce the sole dependence on synthetic pesticides. The present study was conducted to screen the extracts of Neem seed and Turmeric rhizome for pesticidal activities against okra pests (aphids). Experiments were conducted in field with four plots. One plot was kept as a control (unsprayed) and one was sprayed with synthetic pesticides, one with Neem seeds extract and one with Turmeric rhizome extract. The effect on number of pests, plant growth and yield was observed at regular intervals. A significant reduction in pests was recorded in all treatments as compared to the control. Neem seed extract was more effective than Turmeric rhizome extract as revealed by a 73% decrease in aphids by Neem extract in comparison to 54% by Turmeric extract after last application. Both the extracts were found to be more effective than the synthetic pesticides in controlling okra pests. Both the extracts had stimulatory effects on okra growth and yield. For example, the total yield of plots sprayed with Neem (53.3 kg plot-1) and Turmeric extract (47.7 kg plot-1) was higher than the yield of control plot (33.8 kg plot-1) and plot sprayed with synthetic pesticides (39 kg plot-1). It is concluded that Neem and Turmeric extracts can be used as alternative of synthetic pesticides for controlling pests attacks in okra.

Environmental pollution with heavy metals is a serious issue worldwide posing threats to humans, animals and plants and to the stability of overall ecosystem. Chromium (Cr) is one of most hazardous heavy metals with a high carcinogenic and recalcitrant nature. Aim of the present study was to select low-cost biosorbent using wheat straw and Eupatorium adenophorum through simple carbonization process, capable of removing Cr (VI) efficiently from wastewater. From studied plants a low cost adsorbent was prepared for removing Cr (VI) from aqueous solution following very simple carbonization method excluding activation process. Several factors such as pH, contact time, sorbent dosage and temperature were investigated for attaining ideal condition. For analysis of adsorption equilibrium isotherm data, Langmuir, Freundlich and Temkin models were used while pseudo-first-order, pseudo-second-order, external diffusion and intra-particle diffusion models were used for the analysis of kinetic data. The obtained results revealed that 99.9% of Cr (VI) removal was observed in the solution with a pH of 1.0. Among all the tested models Langmuir model fitted more closely according to the data obtained. Increase in adsorption capacity was observed with increasing temperature revealing endothermic nature of Cr (VI). The maximum Cr (VI) adsorption potential of E. adenophorum and wheat straw was 89.22 mg per 1 gram adsorbent at 308K. Kinetic data of absorption precisely followed pseudo-second-order model. Present study revealed highest potential of E. adenophorum and wheat straw for producing low cost adsorbent and to remove Cr (VI) from contaminated water.

Green synthesis is an easy, safe, and environmentally beneficial nanoparticle creation method. It is a great challenge to simultaneously improve the capping and stabilizing agent carrier separation efficiency of photocatalysts. Herein, Zn-doped Titanium dioxide (TiO2) nanoparticles with high exposure of 360 nm using a UV/visible spectrophotometer were prepared via a one-step hydrothermal decomposition method. A detailed analysis reveals that the electronic structures were modulated by Zn doping; thus, the responsive wavelength was extended to 600 nm, which effectively improved the visible light absorption of TiO2. We have optimized the different parameters like concentration, time, and temperature. The peak for TiO2 is located at 600 cm-1 in FTIR. A scanning electron microscope revealed that TiO2 has a definite shape and morphology. The synthesized Zn-doped TiO2NPs were applied against various pathogens to study their anti-bacterial potentials. The anti-bacterial activity of Zn-doped TiO2 has shown robust against two gram-ve bacteria (Salmonella and Escherichia coli) and two gram + ve bacteria (Staphylococcus epidermidis and Staphylococcus aureus). Synthesized Zn-doped TiO2 has demonstrated strong antifungal efficacy against a variety of fungi. Moreover, doping TiO2 nanoparticles with metal oxide greatly improves their characteristics; as a result, doped metal oxide nanoparticles perform better than doped and un-doped metal oxide nanoparticles. Compared to pure TiO2, Zn-doped TiO2 nanoparticles exhibit considerable applications including antimicrobial treatment and water purification. [ABSTRACT FROM AUTHOR]