Search

This work addresses the critical challenge of optimal filter selection for a novel trace gas measurement device. This device uses photonic crystal filters to retrieve trace gas concentrations prone to photon and read noise. The filter selection directly influences accuracy and precision of the gas retrieval and therefore is a crucial performance driver. We formulate the problem as a stochastic combinatorial optimization problem and develop a simulator mimicking gas retrieval with noise. The objective function for selecting filters reducing retrieval error is minimized by the employed metaheuristics, that represent various families of optimizers. We aim to improve the found top-performing algorithms using our novel distance-driven extensions, that employ metrics on the space of filter selections. This leads to a novel adaptation of the UMDA algorithm, we call UMDA-U-PLS-Dist, equipped with one of the proposed distance metrics as the most efficient and robust solver among the considered ones. Analysis of filter sets produced by this method reveals that filters with relatively smooth transmission profiles but containing high contrast improve the device performance. Moreover, the top-performing obtained solution shows significant improvement compared to the baseline.

The Covariance Matrix Adaptation Evolution Strategy (CMA-ES) is one of the most successful examples of a derandomized evolution strategy. However, it still relies on randomly sampling offspring, which can be done via a uniform distribution and subsequently transforming into the required Gaussian. Previous work has shown that replacing this uniform sampling with a low-discrepancy sampler, such as Halton or Sobol sequences, can improve performance over a wide set of problems. We show that iterating through small, fixed sets of low-discrepancy points can still perform better than the default uniform distribution. Moreover, using only 128 points throughout the search is sufficient to closely approximate the empirical performance of using the complete pseudorandom sequence up to dimensionality 40 on the BBOB benchmark. For lower dimensionalities (below 10), we find that using as little as 32 unique low discrepancy points performs similar or better than uniform sampling. In 2D, for which we have highly optimized low discrepancy samples available, we demonstrate that using these points yields the highest empirical performance and requires only 16 samples to improve over uniform sampling. Overall, we establish a clear relation between the $L_2$ discrepancy of the used point set and the empirical performance of the CMA-ES.

In many cases, adversarial attacks are based on specialized algorithms specifically dedicated to attacking automatic image classifiers. These algorithms perform well, thanks to an excellent ad hoc distribution of initial attacks. However, these attacks are easily detected due to their specific initial distribution. We therefore consider other black-box attacks, inspired from generic black-box optimization tools, and in particular the log-normal algorithm. We apply the log-normal method to the attack of fake detectors, and get successful attacks: importantly, these attacks are not detected by detectors specialized on classical adversarial attacks. Then, combining these attacks and deep detection, we create improved fake detectors., Comment: log-normal mutations and their use in detecting surreptitious fake images

In time-series classification, understanding model decisions is crucial for their application in high-stakes domains such as healthcare and finance. Counterfactual explanations, which provide insights by presenting alternative inputs that change model predictions, offer a promising solution. However, existing methods for generating counterfactual explanations for time-series data often struggle with balancing key objectives like proximity, sparsity, and validity. In this paper, we introduce TX-Gen, a novel algorithm for generating counterfactual explanations based on the Non-dominated Sorting Genetic Algorithm II (NSGA-II). TX-Gen leverages evolutionary multi-objective optimization to find a diverse set of counterfactuals that are both sparse and valid, while maintaining minimal dissimilarity to the original time series. By incorporating a flexible reference-guided mechanism, our method improves the plausibility and interpretability of the counterfactuals without relying on predefined assumptions. Extensive experiments on benchmark datasets demonstrate that TX-Gen outperforms existing methods in generating high-quality counterfactuals, making time-series models more transparent and interpretable., Comment: Preprint, under review

In landscape-aware algorithm selection problem, the effectiveness of feature-based predictive models strongly depends on the representativeness of training data for practical applications. In this work, we investigate the potential of randomly generated functions (RGF) for the model training, which cover a much more diverse set of optimization problem classes compared to the widely-used black-box optimization benchmarking (BBOB) suite. Correspondingly, we focus on automated algorithm configuration (AAC), that is, selecting the best suited algorithm and fine-tuning its hyperparameters based on the landscape features of problem instances. Precisely, we analyze the performance of dense neural network (NN) models in handling the multi-output mixed regression and classification tasks using different training data sets, such as RGF and many-affine BBOB (MA-BBOB) functions. Based on our results on the BBOB functions in 5d and 20d, near optimal configurations can be identified using the proposed approach, which can most of the time outperform the off-the-shelf default configuration considered by practitioners with limited knowledge about AAC. Furthermore, the predicted configurations are competitive against the single best solver in many cases. Overall, configurations with better performance can be best identified by using NN models trained on a combination of RGF and MA-BBOB functions.

Time-series anomaly detection plays an important role in engineering processes, like development, manufacturing and other operations involving dynamic systems. These processes can greatly benefit from advances in the field, as state-of-the-art approaches may aid in cases involving, for example, highly dimensional data. To provide the reader with understanding of the terminology, this survey introduces a novel taxonomy where a distinction between online and offline, and training and inference is made. Additionally, it presents the most popular data sets and evaluation metrics used in the literature, as well as a detailed analysis. Furthermore, this survey provides an extensive overview of the state-of-the-art model-based online semi- and unsupervised anomaly detection approaches for multivariate time-series data, categorising them into different model families and other properties. The biggest research challenge revolves around benchmarking, as currently there is no reliable way to compare different approaches against one another. This problem is two-fold: on the one hand, public data sets suffers from at least one fundamental flaw, while on the other hand, there is a lack of intuitive and representative evaluation metrics in the field. Moreover, the way most publications choose a detection threshold disregards real-world conditions, which hinders the application in the real world. To allow for tangible advances in the field, these issues must be addressed in future work.

As attention to recorded data grows in the realm of automotive testing and manual evaluation reaches its limits, there is a growing need for automatic online anomaly detection. This real-world data is complex in many ways and requires the modelling of testee behaviour. To address this, we propose a temporal variational autoencoder (TeVAE) that can detect anomalies with minimal false positives when trained on unlabelled data. Our approach also avoids the bypass phenomenon and introduces a new method to remap individual windows to a continuous time series. Furthermore, we propose metrics to evaluate the detection delay and root-cause capability of our approach and present results from experiments on a real-world industrial data set. When properly configured, TeVAE flags anomalies only 6% of the time wrongly and detects 65% of anomalies present. It also has the potential to perform well with a smaller training and validation subset but requires a more sophisticated threshold estimation method., Comment: Submitted to Studies in Computational Intelligence Journal. arXiv admin note: substantial text overlap with arXiv:2309.02253

Topology optimization problems usually feature multiple local minimizers. To guarantee convergence to local minimizers that perform best globally or to find local solutions that are desirable for practical applications due to easy manufacturability or aesthetic designs, it is important to compute multiple local minimizers of topology optimization problems. Existing methods typically rely on Newton-type solvers during the optimization process, which makes them unsuitable for sensitivity-based topology optimization. In this paper, we introduce a novel deflation approach to systematically find multiple local minimizers of general topology optimization problems. The approach is based on a penalization of previously found local solutions in the objective. We validate our approach on the so-called two-pipes five-holes example. Finally, we introduce a model for the topology optimization of bipolar plates of hydrogen electrolysis cells and demonstrate that our deflation approach enables the discovery of novel designs for such plates.

The reference implementation of Cartesian Genetic Programming (CGP) was written in the C programming language. C inherently follows a procedural programming paradigm, which entails challenges in providing a reusable and scalable implementation model for complex structures and methods. Moreover, due to the limiting factors of C, the reference implementation of CGP does not provide a generic framework and is therefore restricted to a set of predefined evaluation types. Besides the reference implementation, we also observe that other existing implementations are limited with respect to the features provided. In this work, we therefore propose the first version of a modern C++ implementation of CGP that pursues object-oriented design and generic programming paradigm to provide an efficient implementation model that can facilitate the discovery of new problem domains and the implementation of complex advanced methods that have been proposed for CGP over time. With the proposal of our new implementation, we aim to generally promote interpretability, accessibility and reproducibility in the field of CGP., Comment: Accepted as a full paper in the BBSR track at the Genetic and Evolutionary Computation Conference (GECCO'24), July 14-18, 2024, Melbourne, Australia

Large Language Models (LLMs) such as GPT-4 have demonstrated their ability to understand natural language and generate complex code snippets. This paper introduces a novel Large Language Model Evolutionary Algorithm (LLaMEA) framework, leveraging GPT models for the automated generation and refinement of algorithms. Given a set of criteria and a task definition (the search space), LLaMEA iteratively generates, mutates and selects algorithms based on performance metrics and feedback from runtime evaluations. This framework offers a unique approach to generating optimized algorithms without requiring extensive prior expertise. We show how this framework can be used to generate novel black-box metaheuristic optimization algorithms automatically. LLaMEA generates multiple algorithms that outperform state-of-the-art optimization algorithms (Covariance Matrix Adaptation Evolution Strategy and Differential Evolution) on the five dimensional black box optimization benchmark (BBOB). The algorithms also show competitive performance on the 10- and 20-dimensional instances of the test functions, although they have not seen such instances during the automated generation process. The results demonstrate the feasibility of the framework and identify future directions for automated generation and optimization of algorithms via LLMs., Comment: Submitted to IEEE TEVC

Chance-constrained problems involve stochastic components in the constraints which can be violated with a small probability. We investigate the impact of different types of chance constraints on the performance of iterative search algorithms and study the classical maximum coverage problem in graphs with chance constraints. Our goal is to evolve reliable chance constraint settings for a given graph where the performance of algorithms differs significantly not just in expectation but with high confidence. This allows to better learn and understand how different types of algorithms can deal with different types of constraint settings and supports automatic algorithm selection. We develop an evolutionary algorithm that provides sets of chance constraints that differentiate the performance of two stochastic search algorithms with high confidence. We initially use traditional approximation ratio as the fitness function of (1+1)~EA to evolve instances, which shows inadequacy to generate reliable instances. To address this issue, we introduce a new measure to calculate the performance difference for two algorithms, which considers variances of performance ratios. Our experiments show that our approach is highly successful in solving the instability issue of the performance ratios and leads to evolving reliable sets of chance constraints with significantly different performance for various types of algorithms.

The rapid proliferation of smart devices coupled with the advent of 6G networks has profoundly reshaped the domain of collaborative machine learning. Alongside growing privacy-security concerns in sensitive fields, these developments have positioned federated learning (FL) as a pivotal technology for decentralized model training. Despite its vast potential, specially in the age of complex foundation models, FL encounters challenges such as elevated communication costs, computational constraints, and the complexities of non-IID data distributions. We introduce AutoFLIP, an innovative approach that utilizes a federated loss exploration phase to drive adaptive hybrid pruning, operating in a structured and unstructured way. This innovative mechanism automatically identifies and prunes model substructure by distilling knowledge on model gradients behavior across different non-IID client losses topology, thereby optimizing computational efficiency and enhancing model performance on resource constrained scenarios. Extensive experiments on various datasets and FL tasks reveal that AutoFLIP not only efficiently accelerates global convergence, but also achieves superior accuracy and robustness compared to traditional methods. On average, AutoFLIP reduces computational overhead by 48.8% and communication costs by 35.5%, while improving global accuracy. By significantly reducing these overheads, AutoFLIP offer the way for efficient FL deployment in real-world applications for a scalable and broad applicability.

Na\"ive restarts of global optimization solvers when operating on multimodal search landscapes may resemble the Coupon's Collector Problem, with a potential to waste significant function evaluations budget on revisiting the same basins of attractions. In this paper, we assess the degree to which such ``duplicate restarts'' occur on standard multimodal benchmark functions, which defines the \textit{redundancy potential} of each particular landscape. We then propose a repelling mechanism to avoid such wasted restarts with the CMA-ES and investigate its efficacy on test cases with high redundancy potential compared to the standard restart mechanism.

We prove several new versions of Hilbert's basis theorem for non-associative Ore extensions, non-associative skew Laurent polynomial rings, non-associative skew power series rings, and non-associative skew Laurent series rings. For non-associative skew Laurent polynomial rings, we show that both a left and a right version of Hilbert's basis theorem hold. For non-associative Ore extensions, we show that a right version holds, but give a counterexample to a left version; a difference that does not appear in the associative setting., Comment: 9 pages. Earlier versions of arXiv:2207.07994 have been split in two; this is the second part; corrected some typos; minor update

Optimization problems in dynamic environments have recently been the source of several theoretical studies. One of these problems is the monotonic Dynamic Binary Value problem, which theoretically has high discriminatory power between different Genetic Algorithms. Given this theoretical foundation, we integrate several versions of this problem into the IOHprofiler benchmarking framework. Using this integration, we perform several large-scale benchmarking experiments to both recreate theoretical results on moderate dimensional problems and investigate aspects of GA's performance which have not yet been studied theoretically. Our results highlight some of the many synergies between theory and benchmarking and offer a platform through which further research into dynamic optimization problems can be performed.

A great interest has arisen in using Deep Generative Models (DGM) for generative design. When assessing the quality of the generated designs, human designers focus more on structural plausibility, e.g., no missing component, rather than visual artifacts, e.g., noises or blurriness. Meanwhile, commonly used metrics such as Fre\'chet Inception Distance (FID) may not evaluate accurately because they are sensitive to visual artifacts and tolerant to semantic errors. As such, FID might not be suitable to assess the performance of DGMs for a generative design task. In this work, we propose to encode the to-be-evaluated images with a Denoising Autoencoder (DAE) and measure the distribution distance in the resulting latent space. Hereby, we design a novel metric Fre\'chet Denoised Distance (FDD). We experimentally test our FDD, FID and other state-of-the-art metrics on multiple datasets, e.g., BIKED, Seeing3DChairs, FFHQ and ImageNet. Our FDD can effectively detect implausible structures and is more consistent with structural inspections by human experts. Our source code is publicly available at https://github.com/jiajie96/FDD_pytorch.

We introduce and study flipped non-associative polynomial rings. In particular, we show that all Cayley-Dickson algebras naturally appear as quotients of a certain type of such rings; this extends the classical construction of the complex numbers (and quaternions) as a quotient of a (skew) polynomial ring to the octonions, and beyond. We also extend some classical results on algebraic properties of Cayley-Dickson algebras by McCrimmon to a class of flipped non-associative polynomial rings., Comment: 17 pages; corrected an error; fixed some typos

We introduce hom-associative versions of the higher order Weyl algebras, generalizing the construction of the first hom-associative Weyl algebras. We then show that the higher order hom-associative Weyl algebras are simple, and that all their one-sided ideals are principal., Comment: 6 pages; minor update

The number of proposed iterative optimization heuristics is growing steadily, and with this growth, there have been many points of discussion within the wider community. One particular criticism that is raised towards many new algorithms is their focus on metaphors used to present the method, rather than emphasizing their potential algorithmic contributions. Several studies into popular metaphor-based algorithms have highlighted these problems, even showcasing algorithms that are functionally equivalent to older existing methods. Unfortunately, this detailed approach is not scalable to the whole set of metaphor-based algorithms. Because of this, we investigate ways in which benchmarking can shed light on these algorithms. To this end, we run a set of 294 algorithm implementations on the BBOB function suite. We investigate how the choice of the budget, the performance measure, or other aspects of experimental design impact the comparison of these algorithms. Our results emphasize why benchmarking is a key step in expanding our understanding of the algorithm space, and what challenges still need to be overcome to fully gauge the potential improvements to the state-of-the-art hiding behind the metaphors.

When benchmarking optimization heuristics, we need to take care to avoid an algorithm exploiting biases in the construction of the used problems. One way in which this might be done is by providing different versions of each problem but with transformations applied to ensure the algorithms are equipped with mechanisms for successfully tackling a range of problems. In this paper, we investigate several of these problem transformations and show how they influence the low-level landscape features of a set of 5 problems from the CEC2022 benchmark suite. Our results highlight that even relatively small transformations can significantly alter the measured landscape features. This poses a wider question of what properties we want to preserve when creating problem transformations, and how to fairly measure them.

Although deep reinforcement learning methods can learn effective policies for challenging problems such as Atari games and robotics tasks, algorithms are complex, and training times are often long. This study investigates how Evolution Strategies perform compared to gradient-based deep reinforcement learning methods. We use Evolution Strategies to optimize the weights of a neural network via neuroevolution, performing direct policy search. We benchmark both deep policy networks and networks consisting of a single linear layer from observations to actions for three gradient-based methods, such as Proximal Policy Optimization. These methods are evaluated against three classical Evolution Strategies and Augmented Random Search, which all use linear policy networks. Our results reveal that Evolution Strategies can find effective linear policies for many reinforcement learning benchmark tasks, unlike deep reinforcement learning methods that can only find successful policies using much larger networks, suggesting that current benchmarks are easier to solve than previously assumed. Interestingly, Evolution Strategies also achieve results comparable to gradient-based deep reinforcement learning algorithms for higher-complexity tasks. Furthermore, we find that by directly accessing the memory state of the game, Evolution Strategies can find successful policies in Atari that outperform the policies found by Deep Q-Learning. Evolution Strategies also outperform Augmented Random Search in most benchmarks, demonstrating superior sample efficiency and robustness in training linear policy networks.

Symbolic regression (SR) poses a significant challenge for randomized search heuristics due to its reliance on the synthesis of expressions for input-output mappings. Although traditional genetic programming (GP) algorithms have achieved success in various domains, they exhibit limited performance when tree-based representations are used for SR. To address these limitations, we introduce a novel SR approach called Fourier Tree Growing (FTG) that draws insights from functional analysis. This new perspective enables us to perform optimization directly in a different space, thus avoiding intricate symbolic expressions. Our proposed algorithm exhibits significant performance improvements over traditional GP methods on a range of classical one-dimensional benchmarking problems. To identify and explain limiting factors of GP and FTG, we perform experiments on a large-scale polynomials benchmark with high-order polynomials up to degree 100. To the best of the authors' knowledge, this work represents the pioneering application of functional analysis in addressing SR problems. The superior performance of the proposed algorithm and insights into the limitations of GP open the way for further advancing GP for SR and related areas of explainable machine learning., Comment: 14 pages, 3 figures. Submitted to Genetic and Evolutionary Computation Conference (GECCO-2024)

In this work, we propose a model-agnostic instance-based post-hoc explainability method for time series classification. The proposed algorithm, namely Time-CF, leverages shapelets and TimeGAN to provide counterfactual explanations for arbitrary time series classifiers. We validate the proposed method on several real-world univariate time series classification tasks from the UCR Time Series Archive. The results indicate that the counterfactual instances generated by Time-CF when compared to state-of-the-art methods, demonstrate better performance in terms of four explainability metrics: closeness, sensibility, plausibility, and sparsity., Comment: The paper has been accepted by the XAI4Sci workshop of AAAI 2024

Benchmarking heuristic algorithms is vital to understand under which conditions and on what kind of problems certain algorithms perform well. In most current research into heuristic optimization algorithms, only a very limited number of scenarios, algorithm configurations and hyper-parameter settings are explored, leading to incomplete and often biased insights and results. This paper presents a novel approach we call explainable benchmarking. Introducing the IOH-Xplainer software framework, for analyzing and understanding the performance of various optimization algorithms and the impact of their different components and hyper-parameters. We showcase the framework in the context of two modular optimization frameworks. Through this framework, we examine the impact of different algorithmic components and configurations, offering insights into their performance across diverse scenarios. We provide a systematic method for evaluating and interpreting the behaviour and efficiency of iterative optimization heuristics in a more transparent and comprehensible manner, allowing for better benchmarking and algorithm design., Comment: Submitted to ACM TELO

In this paper, we present ECL, a novel multi-modal dataset containing the textual and numerical data from corporate 10K filings and associated binary bankruptcy labels. Furthermore, we develop and critically evaluate several classical and neural bankruptcy prediction models using this dataset. Our findings suggest that the information contained in each data modality is complementary for bankruptcy prediction. We also see that the binary bankruptcy prediction target does not enable our models to distinguish next year bankruptcy from an unhealthy financial situation resulting in bankruptcy in later years. Finally, we explore the use of LLMs in the context of our task. We show how GPT-based models can be used to extract meaningful summaries from the textual data but zero-shot bankruptcy prediction results are poor. All resources required to access and update the dataset or replicate our experiments are available on github.com/henriarnoUG/ECL., Comment: Presented at the 6th Workshop on Financial Technology and Natural Language Processing (FinNLP) @ IJCNLP-AACL 2023 in Bali, Indonesia

Choosing a set of benchmark problems is often a key component of any empirical evaluation of iterative optimization heuristics. In continuous, single-objective optimization, several sets of problems have become widespread, including the well-established BBOB suite. While this suite is designed to enable rigorous benchmarking, it is also commonly used for testing methods such as algorithm selection, which the suite was never designed around. We present the MA-BBOB function generator, which uses the BBOB suite as component functions in an affine combination. In this work, we describe the full procedure to create these affine combinations and highlight the trade-offs of several design decisions, specifically the choice to place the optimum uniformly at random in the domain. We then illustrate how this generator can be used to gain more low-level insight into the function landscapes through the use of exploratory landscape analysis. Finally, we show a potential use-case of MA-BBOB in generating a wide set of training and testing data for algorithm selectors. Using this setup, we show that the basic scheme of using a set of landscape features to predict the best algorithm does not lead to optimal results, and that an algorithm selector trained purely on the BBOB functions generalizes poorly to the affine combinations.

The primary objective of this paper is to conduct a comparative analysis between two Machine Learning approaches: Tensor Networks (TN) and Variational Quantum Classifiers (VQC). While both approaches share similarities in their representation of the Hilbert space using a logarithmic number of parameters, they diverge in the manifolds they cover. Thus, the aim is to evaluate and compare the expressibility and trainability of these approaches. By conducting this comparison, we can gain insights into potential areas where quantum advantage may be found. Our findings indicate that VQC exhibits advantages in terms of speed and accuracy when dealing with data, characterized by a small number of features. However, for high-dimensional data, TN surpasses VQC in overall classification accuracy. We believe that this disparity is primarily attributed to challenges encountered during the training of quantum circuits. We want to stress that in this article, we focus on only one particular task and do not conduct thorough averaging of the results. Consequently, we recommend considering the results of this article as a unique case without excessive generalization.

Deep Generative Models (DGMs) are widely used to create innovative designs across multiple industries, ranging from fashion to the automotive sector. In addition to generating images of high visual quality, the task of structural design generation imposes more stringent constrains on the semantic expression, e.g., no floating material or missing part, which we refer to as plausibility in this work. We delve into the impact of noise schedules of diffusion models on the plausibility of the outcome: there exists a range of noise levels at which the model's performance decides the result plausibility. Also, we propose two techniques to determine such a range for a given image set and devise a novel parametric noise schedule for better plausibility. We apply this noise schedule to the training and sampling of the well-known diffusion model EDM and compare it to its default noise schedule. Compared to EDM, our schedule significantly improves the rate of plausible designs from 83.4% to 93.5% and Fr\'echet Inception Distance (FID) from 7.84 to 4.87. Further applications of advanced image editing tools demonstrate the model's solid understanding of structure.

We consider the problem of learning multiple tasks in a continual learning setting in which data from different tasks is presented to the learner in a streaming fashion. A key challenge in this setting is the so-called "catastrophic forgetting problem", in which the performance of the learner in an "old task" decreases when subsequently trained on a "new task". Existing continual learning methods, such as Averaged Gradient Episodic Memory (A-GEM) and Orthogonal Gradient Descent (OGD), address catastrophic forgetting by minimizing the loss for the current task without increasing the loss for previous tasks. However, these methods assume the learner knows when the task changes, which is unrealistic in practice. In this paper, we alleviate the need to provide the algorithm with information about task changes by using an online clustering-based approach on a dynamically updated finite pool of samples or gradients. We thereby successfully counteract catastrophic forgetting in one of the hardest settings, namely: domain-incremental learning, a setting for which the problem was previously unsolved. We showcase the benefits of our approach by applying these ideas to projection-based methods, such as A-GEM and OGD, which lead to task-agnostic versions of them. Experiments on real datasets demonstrate the effectiveness of the proposed strategy and its promising performance compared to state-of-the-art methods.

A clear need for automatic anomaly detection applied to automotive testing has emerged as more and more attention is paid to the data recorded and manual evaluation by humans reaches its capacity. Such real-world data is massive, diverse, multivariate and temporal in nature, therefore requiring modelling of the testee behaviour. We propose a variational autoencoder with multi-head attention (MA-VAE), which, when trained on unlabelled data, not only provides very few false positives but also manages to detect the majority of the anomalies presented. In addition to that, the approach offers a novel way to avoid the bypass phenomenon, an undesirable behaviour investigated in literature. Lastly, the approach also introduces a new method to remap individual windows to a continuous time series. The results are presented in the context of a real-world industrial data set and several experiments are undertaken to further investigate certain aspects of the proposed model. When configured properly, it is 9% of the time wrong when an anomaly is flagged and discovers 67% of the anomalies present. Also, MA-VAE has the potential to perform well with only a fraction of the training and validation subset, however, to extract it, a more sophisticated threshold estimation method is required.

In this paper we consider the topology optimization for a bipolar plate of a hydrogen electrolysis cell. We present a model for the bipolar plate using the Stokes equation with an additional drag term, which models the influence of fluid and solid regions. Furthermore, we derive a criterion for a uniform flow distribution in the bipolar plate. To obtain shapes that are well-manufacturable, we introduce a novel smoothing technique for the fluid velocity. Finally, we present some numerical results and investigate the influence of the smoothing on the obtained shapes.

Generative Engineering Design approaches driven by Deep Generative Models (DGM) have been proposed to facilitate industrial engineering processes. In such processes, designs often come in the form of images, such as blueprints, engineering drawings, and CAD models depending on the level of detail. DGMs have been successfully employed for synthesis of natural images, e.g., displaying animals, human faces and landscapes. However, industrial design images are fundamentally different from natural scenes in that they contain rich structural patterns and long-range dependencies, which are challenging for convolution-based DGMs to generate. Moreover, DGM-driven generation process is typically triggered based on random noisy inputs, which outputs unpredictable samples and thus cannot perform an efficient industrial design exploration. We tackle these challenges by proposing a novel model Self-Attention Adversarial Latent Autoencoder (SA-ALAE), which allows generating feasible design images of complex engineering parts. With SA-ALAE, users can not only explore novel variants of an existing design, but also control the generation process by operating in latent space. The potential of SA-ALAE is shown by generating engineering blueprints in a real automotive design task., Comment: 18 pages, 8 figures

Extending a recent suggestion to generate new instances for numerical black-box optimization benchmarking by interpolating pairs of the well-established BBOB functions from the COmparing COntinuous Optimizers (COCO) platform, we propose in this work a further generalization that allows multiple affine combinations of the original instances and arbitrarily chosen locations of the global optima. We demonstrate that the MA-BBOB generator can help fill the instance space, while overall patterns in algorithm performance are preserved. By combining the landscape features of the problems with the performance data, we pose the question of whether these features are as useful for algorithm selection as previous studies suggested. MA-BBOB is built on the publicly available IOHprofiler platform, which facilitates standardized experimentation routines, provides access to the interactive IOHanalyzer module for performance analysis and visualization, and enables comparisons with the rich and growing data collection available for the (MA-)BBOB functions., Comment: To appear in the AutoML 2023 proceedings (ABCD track)

Locality is a crucial property for efficiently optimising black-box problems with randomized search heuristics. However, in practical applications, it is not likely to always find such a genotype encoding of candidate solutions that this property is upheld with respect to the Hamming distance. At the same time, it may be possible to use domain-specific knowledge to define a metric with locality property. We propose two mutation operators to solve such optimization problems more efficiently using the metric. The first operator assumes prior knowledge about the distance, the second operator uses the distance as a black box. Those operators apply an estimation of distribution algorithm to find the best mutant according to the defined in the paper function, which employs the given distance. For pseudo-boolean and integer optimization problems, we experimentally show that both mutation operators speed up the search on most of the functions when applied in considered evolutionary algorithms and random local search. Moreover, those operators can be applied in any randomized search heuristic which uses perturbations. However, our mutation operators increase wall-clock time and so are helpful in practice when distance is (much) cheaper to compute than the real objective function., Comment: 10 pages, 2 figures

Within the optimization community, the question of how to generate new optimization problems has been gaining traction in recent years. Within topics such as instance space analysis (ISA), the generation of new problems can provide new benchmarks which are not yet explored in existing research. Beyond that, this function generation can also be exploited for solving complex real-world optimization problems. By generating functions with similar properties to the target problem, we can create a robust test set for algorithm selection and configuration. However, the generation of functions with specific target properties remains challenging. While features exist to capture low-level landscape properties, they might not always capture the intended high-level features. We show that a genetic programming (GP) approach guided by these exploratory landscape analysis (ELA) properties is not always able to find satisfying functions. Our results suggest that careful considerations of the weighting of landscape properties, as well as the distance measure used, might be required to evolve functions that are sufficiently representative to the target landscape.