Search

Near-field optical microscopes with two independent tips for simultaneous excitation and detection can be essential tools for studying localized optical phenomena on the subwavelength scale. Here, we report on the implementation of a fully automated and robust dual-tip scanning near-field optical microscope (SNOM), in which the excitation tip is stationary, while the detection tip automatically scans the surrounding area. To monitor and control the distance between the two probes, mechanical interactions due to shear forces are used. We experimentally investigate suitable scan parameters and find that the automated dual-tip SNOM can operate stably for a wide range of parameters. To demonstrate the potential of the automated dual-tip SNOM, we characterize the propagation of surface plasmon polaritons on a gold film for visible and near-infrared wavelengths. The good agreement of the measurements with numerical simulations verifies the capability of the dual-tip SNOM for the near-field characterization of localized optical phenomena.

Digital imaging has been steadily improving over the past decades and we are moving towards a wide use of multi- and hyperspectral cameras. A key component of such imaging systems are color filter arrays, which define the spectrum of light detected by each camera pixel. Hence, it is essential to develop a variable, robust and scalable way for controlling the transmission of light. Nanostructured surfaces, also known as metasurfaces, offer a promising solution as their transmission spectra can be controlled by shaping the wavelength-dependent scattering properties of their constituting elements. Here we present, metasurfaces based on silicon nanodisks, which provide filter functions with amplitudes reaching 70-90% of transmission, and well suitable for RGB and CMY color filter arrays, the initial stage towards the further development of hyperspectral filters. We suggest and discuss possible ways to expand the color gamut and improve the color values of such optical filters.

We present a planar spectro-polarimeter based on Fabry-P{\'e}rot cavities with embedded polarization-sensitive high-index nanostructures. A $7~\mu$m-thick spectro-polarimetric system for 3 spectral bands and 2 linear polarization states is experimentally demonstrated. Furthermore, an optimal design is theoretically proposed, estimating that a system with a bandwidth of 127~nm and a spectral resolution of 1~nm is able to reconstruct the first three Stokes parameters \textcolor{black}{with a signal-to-noise ratio of -13.14~dB with respect to the the shot noise limited SNR}. The pixelated spectro-polarimetric system can be directly integrated on a sensor, thus enabling applicability in a variety of miniaturized optical devices, including but not limited to satellites for Earth observation.

High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silicon film into an array of Mie resonators. The proposed technique is based on laser-interference-induced dewetting. A precise control of the laser pulse energy enables the fabrication of ordered dielectric metasurfaces in areas spanning tens of micrometers and consisting of thousands of hemispherical nanoparticles with a single laser shot. The fabricated nanoparticles exhibit a wavelength-dependent optical response with a strong electric dipole signature. Variation of the pre-deposited silicon film thickness allows tailoring of the resonances in the targeted visible and infrared spectral ranges. Such direct and high-throughput fabrication paves the way towards a simple realization of spatially invariant metasurface-based devices.

Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effects: crystallization and reshaping, while the heat is localized by a high-precision positioning of the focused laser beam. Moreover, for the first time, the resonant behavior of dielectric metasurface elements is exploited to engineer a specific absorption profile, which leads to a spatially-selective heating and a customized modification. Such technique has a potential to reduce the complexity in the fabrication of non-uniform metasurface-based optical elements. Two distinct cases, a spatial pixelation of a large-scale metasurface and a height modification of metasurface elements, are explicitly demonstrated.

Digital color imaging relies on spectral filters on top of a pixelated sensor, such as a CMOS image sensor. An important parameter of imaging devices is their resolution, which depends on the size of the pixels. For many applications, a high resolution is desirable, consequently requiring small spectral filters. Dielectric nanostructures, due to their resonant behavior and its tunability, offer the possibility to be assembled into flexible and miniature spectral filters, which could potentially replace conventional pigmented and dye-based color filters. In this paper, we demonstrate the generation of transmissive structural colors based on uniform-height amorphous silicon nanostructures. We optimize the structures for the primary RGB colors and report the construction of sub-micrometer RGB filter arrays for a pixel size down to 0.5 {\mu}m.