Search

Addressing global challenges of waste management demands innovative approaches to turn biowaste into valuable resources. This chapter explores the potential of microbial electrochemical technologies (METs) as an alternative opportunity for biowaste valorisation and resource recovery due to their potential to address limitations associated with traditional methods. METs leverage microbial-driven oxidation and reduction reactions, enabling the conversion of different feedstocks into energy or value-added products. Their versatility spans across gas, food, water and soil streams, offering multiple solutions at different technological readiness levels to advance several sustainable development goals (SDGs) set out in the 2030 Agenda. By critically examining recent studies, this chapter uncovers challenges, optimisation strategies, and future research directions for real-world MET implementations. The integration of economic perspectives with technological developments provides a comprehensive understanding of the opportunities and demands associated with METs in advancing the circular economy agenda, emphasising their pivotal role in waste minimisation, resource efficiency promotion, and closed-loop system renovation., (© 2024. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

The potential of nitrate electro-bioremediation has been fully demonstrated at the laboratory scale, although it has not yet been fully implemented due to the challenges associated with scaling-up bioelectrochemical reactors and their on-site operation. This study describes the initial start-up and subsequent stable operation of an electro-bioremediation pilot plant for the treatment of nitrate-contaminated groundwater on-site (Navata site, Spain). The pilot plant was operated under continuous flow mode for 3 months, producing an effluent suitable for drinking water in terms of nitrates and nitrites (<50 mg NO 3 L - L -1 L 2 - L -1 ). A maximum nitrate removal rate of 0.9 ± 0.1 kg NO 3 - m -3 d -1 (efficiency 82 ± 18 %) was achieved at a cathodic hydraulic retention time (HRT cat ) of 2.0 h with a competitive energy consumption of 4.3 ± 0.4 kWh kg -1 NO 3 - . Under these conditions, the techno-economic analysis estimated an operational cost of 0.40 € m -3 . Simultaneously, microbiological analyses revealed structural heterogeneity in the reactor, with denitrification functionality concentrated predominantly from the centre to the upper section of the reactor. The most abundant groups were Pseudomonadaceae, Rhizobiaceae, Gallionellaceae, and Xanthomonadaceae. In conclusion, this pilot plant represents a significant advancement in implementing this technology on a larger scale, validating its effectiveness in terms of nitrate removal and cost-effectiveness. Moreover, the results validate the electro-bioremediation in a real environment and encourage further investigation of its potential as a water treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Co-cultures of clostridia with distinct physiological properties have emerged as an alternative to increase the production of butanol and other added-value compounds from biomass. The optimal performance of mixed tandem cultures may depend on the stability and fitness of each species in the consortium, making the development of specific quantification methods to separate their members crucial. In this study, we developed and tested a multiplex qPCR method targeting the 16S rRNA gene for the simultaneous quantification of Clostridium acetobutylicum, Clostridium carboxidivorans and Clostridium cellulovorans in co-cultures. Designed primer pairs and probes could specifically quantify the three Clostridium species with no cross-reactions thus allowing significant changes in their growth kinetics in the consortia to be detected and correlated with productivity. The method was used to test a suitable medium composition for simultaneous growth of the three species. We show that higher alcohol productions were obtained when combining C. carboxidivorans and C. acetobutylicum compared to individual cultures, and further improved (> 90%) in the triplet consortium. Altogether, the methodology could be applied to fermentation processes targeting butanol productions from lignocellulosic feedstocks with a higher substrate conversion efficiency., (© 2023. The Author(s).)

Microbial electrosynthesis (MES) is a promising carbon utilization technology, but the low-value products (i.e., acetate or methane) and the high electric power demand hinder its industrial adoption. In this study, electrically efficient MES cells with a low ohmic resistance of 15.7 mΩ m 2 were operated galvanostatically in fed-batch mode, alternating periods of high CO 2 and H 2 availability. This promoted acetic acid and ethanol production, ultimately triggering selective (78% on a carbon basis) butyric acid production via chain elongation. An average production rate of 14.5 g m -2  d -1 was obtained at an applied current of 1.0 or 1.5 mA cm -2 , being Megasphaera sp. the key chain elongating player. Inoculating a second cell with the catholyte containing the enriched community resulted in butyric acid production at the same rate as the previous cell, but the lag phase was reduced by 82%. Furthermore, interrupting the CO 2 feeding and setting a constant pH 2 of 1.7-1.8 atm in the cathode compartment triggered solventogenic butanol production at a pH below 4.8. The efficient cell design resulted in average cell voltages of 2.6-2.8 V and a remarkably low electric energy requirement of 34.6 kWh el kg -1 of butyric acid produced, despite coulombic efficiencies being restricted to 45% due to the cross-over of O 2 and H 2 through the membrane. In conclusion, this study revealed the optimal operating conditions to achieve energy-efficient butyric acid production from CO 2 and suggested a strategy to further upgrade it to valuable butanol., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

It has been recently suggested that Alcaligenes use a previously unknown pathway to convert ammonium into dinitrogen gas (Dirammox) via hydroxylamine (NH 2 OH). This fact alone already implies a significant decrease in the aeration requirements for the process, but the process would still be dependent on external aeration. This work studied the potential use of a polarised electrode as an electron acceptor for ammonium oxidation using the recently described Alcaligenes strain HO-1 as a model heterotrophic nitrifier. Results indicated that Alcaligenes strain HO-1 requires aeration for metabolism, a requirement that cannot be replaced for a polarised electrode alone. However, concomitant elimination of succinate and ammonium was observed when operating a previously grown Alcaligenes strain HO-1 culture in the presence of a polarised electrode and without aeration. The usage of a polarised electrode together with aeration did not increase the succinate nor the nitrogen removal rates observed with aeration alone. However, current density generation was observed along a feeding batch test representing an electron share of 3% of the ammonium removed in the presence of aeration and 16% without aeration. Additional tests suggested that hydroxylamine oxidation to dinitrogen gas could have a relevant role in the electron discharge onto the anode. Therefore, the presence of a polarised electrode supported the metabolic functions of Alcaligenes strain HO-1 on the simultaneous oxidation of succinate and ammonium., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Electroactive microorganisms can exchange electrons with other cells or conductive interfaces in their extracellular environment. This property opens the way to a broad range of practical biotechnological applications, from manufacturing sustainable chemicals via electrosynthesis, to bioenergy, bioelectronics or improved, low-energy demanding wastewater treatments. Besides, electroactive microorganisms play key roles in environmental bioremediation, significantly impacting process efficiencies. This review highlights our present knowledge on microbial interactions promoting the communication between electroactive microorganisms in a biofilm on an electrode in bioelectrochemical systems (BES). Furthermore, the immediate knowledge gaps that must be closed to develop novel technologies will also be acknowledged., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Volatile silicon compounds present in the biogas of anaerobic digesters can cause severe problems in the energy recovery systems, inducing costly damages. Herein, the microbial community of a lab-scale biotrickling filter (BTF) was studied while testing its biodegradation capacity on octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5), in the presence of toluene, limonene and hexane. The reactor performance was tested at different empty bed residence times (EBRT) and packing materials. Community structure was analysed by bar-coded amplicon sequencing of the 16S rRNA gene. Microbial diversity and richness were higher in the inoculum and progressively decreased during BTF operation (Simpson's diversity index changing from 0.98-0.90 and Richness from 900 to 200 OTUs). Minimum diversity was found when reactor was operated at relatively low EBRT (7.3 min) using a multicomponent feed. The core community was composed of 36 OTUs (accounting for 55% of total sequences). Packing material played a key role in the community structure. Betaproteobacteriales were dominant in the presence of lava rock and were partially substituted by Corynebacteriales and Rhizobiales when activated carbon was added to the BTF. Despite these changes, a stable and resilient core microbiome was selected defining a set of potentially degrading bacteria for siloxane bioremoval as a complementary alternative to non-regenerative adsorption onto activated carbon., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

The coexistence of different pollutants in groundwater is a common threat. Sustainable and resilient technologies are required for their treatment. The present study aims to evaluate microbial electrochemical technologies (METs) for treating groundwater contaminated with nitrate (NO 3 - L 3 and 5 mg As(III) L - L -1 and 5 mg As(III) L -1 ) identifying the key operational conditions. Different hydraulic retention times (HRT) were evaluated, reaching a maximum nitrate reduction rate of 519 g N-NO 3 - m 3 . Electrochemical and microbiological characterization of single granules suggested that arsenite at 5 mg L Net Cathodic Compartment d -1 at HRT of 2.3 h with a cathodic coulombic efficiency of around 100 %. Simultaneously, arsenic oxidation was complete at all HRT tested down to 1.6 h reaching an oxidation rate of up to 90 g As(III) m -3 Net Reactor Volume d -1 . Electrochemical and microbiological characterization of single granules suggested that arsenite at 5 mg L -1 did not have an inhibitory effect on a denitrifying biocathode mainly represented by Sideroxydans sp. Although the coexistence of abiotic and biotic arsenic oxidation pathways was shown to be likely, microbial arsenite oxidation linked to denitrification by Achromobacter sp. was the most probable pathway. This research paves the ground towards a real application for treating groundwater with widespread pollutants., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Hydrogen is a key intermediate element in microbial electrosynthesis as a mediator of the reduction of carbon dioxide (CO 2 ) into added value compounds. In the present work we aimed at studying the biological production of hydrogen in biocathodes operated at - 1.0 V vs. Ag/AgCl, using a highly comparable technology and CO 2 as carbon feedstock. Ten bacterial strains were chosen from genera Rhodobacter, Rhodopseudomonas, Rhodocyclus, Desulfovibrio and Sporomusa, all described as hydrogen producing candidates. Monospecific biofilms were formed on carbon cloth cathodes and hydrogen evolution was constantly monitored using a microsensor. Eight over ten bacteria strains showed electroactivity and H 2 production rates increased significantly (two to eightfold) compared to abiotic conditions for two of them (Desulfovibrio paquesii and Desulfovibrio desulfuricans). D. paquesii DSM 16681 exhibited the highest production rate (45.6 ± 18.8 µM min -1 ) compared to abiotic conditions (5.5 ± 0.6 µM min -1 ), although specific production rates (per 16S rRNA copy) were similar to those obtained for other strains. This study demonstrated that many microorganisms are suspected to participate in net hydrogen production but inherent differences among strains do occur, which are relevant for future developments of resilient biofilm coated cathodes as a stable hydrogen production platform in microbial electrosynthesis.

The benefits of plant-microbe interactions have been exploited extensively for nutrient removal. Radial oxygen loss in aquatic macrophytes potentially promotes nitrification and accelerates nitrogen removal through coupled nitrification-denitrification process. Nitrification is likely the limiting activity for an effective nitrogen removal in wetlands. In this work, we have quantified the effect of radial oxygen losses in Typha angustifolia plants in environments of contrasting salinities, including a temporary lagoon, a constructed wetland, and a river estuary. In all sites, radial oxygen diffusion occurred mainly at a narrow band, from 1 to 5 cm from the root tip, and were almost absent at the tip and basal sections of the root (> 5 cm). Root sections with active oxygen diffusion tended to show higher bacterial and archaeal densities in the rhizoplane according to 16S rRNA gene abundance data, except at higher salinities. Archaeal amoA /bacterial amoA gene ratios were highly variable among sites. Archaeal nitrifiers were only favoured over bacteria on the root surface of Typha collected from the constructed wetland. Collectively, radial oxygen loss had little effect on the nitrifying microbial community at the smaller scale (differences according to root-section), and observed differences were more likely related to prevailing physicochemical conditions of the studied environments or to long-term effects of the root microenvironment (root vs sediment comparisons).

In constructed wetlands (CW), denitrification usually accounts for > 60% of nitrogen removal and is supposedly affected by wetland management practices, such as dredging (and plant removal). These practices cause an impact in sediment properties and microbial communities living therein. We have quantified the effects of a sediment dredging event on dissimilatory nitrite reduction by analysing the structure and activities of the microbial community before and after the event. Potential rates for nitrate reduction to ammonia and denitrification were in accordance with changes in the physicochemical conditions. Denitrification was the predominant pathway for nitrite removal (> 60%) and eventually led to the complete removal of nitrate. On the contrary, dissimilatory nitrite reduction to ammonia (DNRA) increased from 5 to 18% after the dredging event. Both actual activities and abundances of 16S rRNA, nirK and nirS significantly decreased after sediment dredging. However, genetic potential for denitrification (qnirS + qnirK/q16S rRNA) remained unchanged. Analyses of the 16S rRNA gene sequences revealed the importance of vegetation in shaping microbial community structures, selecting specific phylotypes potentially contributing to the nitrogen cycle. Overall, we confirmed that sediment dredging and vegetation removal exerted a measurable effect on the microbial community, but not on potential nitrite + nitrate removal rates. According to redundancy analysis, nitrate concentration and pH were the main variables affecting sediment microbial communities in the Empuriabrava CWs. Our results highlight a high recovery of the functionality of an ecosystem service after a severe intervention and point to metabolic redundancy of denitrifiers. We are confident these results will be taken into account in future management strategies in CWs.

Organosilicon compounds are the most undesirable compounds for the energy recovery of biogas. These compounds are still resistant to biodegradation when biotechnologies are considered for biogas purification. Herein we isolated 52 bacterial species from anaerobic batch enrichment cultures (BEC) saturated with D4 and from an anaerobic lab-scale biotrickling filter (BTF) fed with a gas flow containing D4 as unique carbon source. Among those Methylibium sp. and Pseudomonas aeruginosa showed the highest capacity to remove D4 (53.04% ± 0.03 and 24.42% ± 0.02, respectively). Contrarily, co-culture evaluation treatment for the biodegradation of siloxanes together with volatile organic compounds removed a lower concentration of D4 compared to toluene and limonene, which were completely removed. Remarkably, the siloxane D5 proved to be more biodegradable than D4. Substrates removal values achieved by Methylibium sp. suggested that this bacterial isolate could be used in biological removal technologies of siloxanes., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Electromethanogenesis is the bioreduction of carbon dioxide (CO2) to methane (CH4) utilizing an electrode as electron donor. Some studies have reported the active participation of Methanobacterium sp. in electron capturing, although no conclusive results are available. In this study, we aimed at determining short-time changes in the expression levels of [NiFe]-hydrogenases (Eha, Ehb and Mvh), heterodisulfide reductase (Hdr), coenzyme F420-reducing [NiFe]-hydrogenase (Frh), and hydrogenase maturation protein (HypD), according to the electron flow in independently connected carbon cloth cathodes poised at- 800 mV vs. standard hydrogen electrode (SHE). Amplicon massive sequencing of cathode biofilm confirmed the presence of an enriched Methanobacterium sp. population (>70% of sequence reads), which remained in an active state (78% of cDNA reads), tagging this archaeon as the main methane producer in the system. Quantitative RT-PCR determinations of ehaB, ehbL, mvhA, hdrA, frhA, and hypD genes resulted in only slight (up to 1.5 fold) changes for four out of six genes analyzed when cells were exposed to open (disconnected) or closed (connected) electric circuit events. The presented results suggested that suspected mechanisms for electron capturing were not regulated at the transcriptional level in Methanobacterium sp. for short time exposures of the cells to connected-disconnected circuits. Additional tests are needed in order to confirm proteins that participate in electron capturing in Methanobacterium sp., Competing Interests: The authors have declared that no competing interests exist.

The high genetic similarity between some carboxydotrophic bacteria does not allow for the use of common sequencing techniques targeting the 16S rRNA gene for species identification. 16S rRNA sequencing fails to discriminate among Clostridium ljungdahlii and 'Clostridium autoethanogenum', despite this two species exhibit significant differences in CO2 assimilation and alcohol production. In this work we designed PCR primers targeting for the DNA gyrase subunit A (gyrA) and a putative formate/nitrite transporter (fnt) to specifically detect the presence of 'C. autoethanogenum', C. ljungdahlii or Clostridium carboxidivorans. We could confirm the simultaneous presence of C. ljungdahlii and 'C. autoethanogenum' in different bioreactors, and a preference of the latter for high CO2 content.

Research efforts aimed at increasing ethanol and butanol productivity from syngas are currently gaining attention. For most model carboxydotrophic bacteria, production rates, yields and maximum product titres have been studied in detail, but little is known on alcohol toxicity in these bacteria. The aim of this work was to investigate the inhibitory effects of ethanol and butanol on the growth of Clostridium ljungdahlii PETC, C. carboxidivorans P7, and 'Butyribacterium methylotrophicum DSM3468'. Experiments to determine inhibitory effects due to product accumulation were carried out using a synthetic mixture of CO:CO2:H2 as a substrate. These conditions were chosen to mimic gaseous effluents of biomass and waste gasification plants. Inhibition effects were recorded as changes in growth parameters. No significant inhibition was observed for ethanol at concentrations below 15 g/L. The three species exhibited higher sensitivity to butanol. Half inhibition constants for butanol could be estimated for P7 (IC50 = 4.12 g/L), DSM3468 (IC50 = 1.79 g/L), and PETC (IC50 = 9.75 g/L). In conclusion, at least for the tested strains, alcohol toxicity is not an immediate handicap for increasing alcohol production of the tested homoacetogenic strains.

Natural attenuation processes alleviate the impact of fertilization practices on groundwater resources. Therefore, identifying the occurrence of denitrification has become a requirement for water quality management. Several approaches are useful for this purpose, such as isotopic and microbiological methods, each of them providing distinct but complementary information about denitrification reactions, attenuation rates and their occurrence in the aquifer. In this paper, we investigate the contribution of both approaches to describe denitrification in a consolidated rock aquifer (limestone and marls), with a porosity related to fracture networks located in the northeastern sector of the Osona basin (NE Spain). Isotopic methods indicated the origin of nitrate (fertilization using manure) and that denitrification occurred, reaching a reduction of near 25% of the nitrate mass in groundwater. The studied area could be divided in two zones with distinct agricultural pressures and, consequently, nitrate concentrations in groundwater. Denitrification occurred in both zones and at different levels, indicating that attenuation processes took place all along the whole hydrogeological unit, and that the observed levels could be attributed to a larger flow path or, in a minor extent, to mixing processes that mask the actual denitrification rates. Microbiological data showed a correlation between denitrifier genes and the isotopic composition. However, the groundwater microbiome and the distribution of denitrifying bacteria did not reveal a major influence on the denitrification level observed by isotopic methods. This focuses the interest of microbiological analysis to identify functional genes within the bacteria present in the aquifer. Results indicated that isotopic methods provide information of the overall denitrification ability of the hydrogeological unit, and that genomic data represent the processes actually acting nearby the well. A combination of both approaches is advised to support induced in situ attenuation actions in polluted sites., (Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.)

To date acetate is the main product of microbial electrosynthesis (MES) from carbon dioxide (CO 2 ). In this work a tubular bioelectrochemical system was used to carry out MES and enhance butyrate production over the other organic products. Batch tests were performed at a fixed cathode potential of -0.8V vs SHE. The reproducibility of the results according to previous experiments was validated in a preliminary test. According to the literature butyrate production could take place by chain elongation reactions at low pH and high hydrogen partial pressure (p H2 ). During the experiment, CO 2 supply was limited to build up p H2 and trigger the production of compounds with a higher degree of reduction. In test 1 butyrate became the predominant end-product, with a concentration of 59.7mMC versus 20.3mMC of acetate, but limitation on CO 2 supply resulted in low product titers. CO 2 limitation was relaxed in test 2 to increase the bioelectrochemical activity but increase p H2 and promote the production of butyrate, what resulted in the production of 87.5mMC of butyrate and 34.7mMC of acetate. The consumption of ethanol, and the presence of other products in the biocathode (i.e. caproate) suggested that butyrate production took place through chain elongation reactions, likely driven by Megasphaera sueciensis (>39% relative abundance). Extraction and concentration of butyrate was performed by liquid membrane extraction. A concentration phase with 252.4mMC of butyrate was obtained, increasing also butyrate/acetate ratio to 16.4. The results are promising for further research on expanding the product portfolio of MES., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This study reveals that reduction of carbon dioxide (CO 2 ) to commodity chemicals can be functionally compartmentalized in bioelectrochemical systems. In the present example, a syntrophic consortium composed by H 2 -producers (Rhodobacter sp.) in the biofilm is combined with carboxidotrophic Clostridium species, mainly found in the bulk liquid. The performance of these H 2 -mediated electricity-driven systems could be tracked by the activity of a biological H 2 sensory protein identified at cathode potentials between -0.2V and -0.3V vs SHE. This seems to point out that such signal is not strain specific, but could be detected in any organism containing hydrogenases. Thus, the findings of this work open the door to the development of a biosensor application or soft sensors for monitoring such systems., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Microbial fuel cells (MFCs) can be designed to combine water treatment with concomitant electricity production. Animal manure treatment has been poorly explored using MFCs, and its implementation at full-scale primarily relies on the bacterial distribution and activity within the treatment cell. This study reports the bacterial community changes at four positions within the anode of two almost identically operated MFCs fed swine manure. Changes in the microbiome structure are described according to the MFC fluid dynamics and the application of a maximum power point tracking system (MPPT) compared to a fixed resistance system (Ref-MFC). Both external resistance and cell hydrodynamics are thought to heavily influence MFC performance. The microbiome was characterised both quantitatively (qPCR) and qualitatively (454-pyrosequencing) by targeting bacterial 16S rRNA genes. The diversity of the microbial community in the MFC biofilm was reduced and differed from the influent swine manure. The adopted electric condition (MPPT vs fixed resistance) was more relevant than the fluid dynamics in shaping the MFC microbiome. MPPT control positively affected bacterial abundance and promoted the selection of putatively exoelectrogenic bacteria in the MFC core microbiome (Sedimentibacter sp. and gammaproteobacteria). These differences in the microbiome may be responsible for the two-fold increase in power production achieved by the MPPT-MFC compared to the Ref-MFC., Competing Interests: The authors have declared that no competing interests exist.

Gasification of organic wastes coupled to syngas fermentation allows the recovery of carbon in the form of commodity chemicals, such as carboxylates and biofuels. Acetogenic bacteria ferment syngas to mainly two-carbon compounds, although a few strains can also synthesize four-, and six-carbon molecules. In general, longer carbon chain products have a higher biotechnological (and commercial) value due to their higher energy content and their lower water solubility. However, de-novo synthesis of medium-chain products from syngas is quite uncommon in acetogenic bacteria. An alternative to de-novo synthesis is bioproduction of short-chain products (C2 and C4), and their subsequent elongation to C4, C6, or C8 through reversed β-oxidation metabolism. This two-step synergistic approach has been successfully applied for the production of up to C8 compounds, although the accumulation of alcohols in these mixed cultures remained below detection limits. The present work investigates the production of higher alcohols from syngas by open mixed cultures (OMC). A syngas-fermenting community was enriched from sludge of an anaerobic digester for a period of 109 days in a lab-scale reactor. At the end of this period, stable production of ethanol and butanol was obtained. C6 compounds were only transiently produced at the beginning of the enrichment phase, during which Clostridium kluyveri, a bacterium able to carry out carbon chain elongation, was detected in the community. Further experiments showed pH as a critical parameter to maintain chain elongation activity in the co-culture. Production of C6 compounds was recovered by preventing fermentation pH to decrease below pH 4.5-5. Finally, experiments showed maximal production of C6 compounds (0.8 g/L) and alcohols (1.7 g/L of ethanol, 1.1 g/L of butanol, and 0.6 g/L of hexanol) at pH 4.8. In conclusion, low fermentation pH is critical for the production of alcohols, although detrimental to C. kluyveri. Fine control of fermentation pH to final values around 4.8 could allow sustained production of higher alcohols.

Microorganisms are vital in mediating the earth's biogeochemical cycles; yet, despite our rapidly increasing ability to explore complex environmental microbial communities, the relationship between microbial community structure and ecosystem processes remains poorly understood. Here, we address a fundamental and unanswered question in microbial ecology: 'When do we need to understand microbial community structure to accurately predict function?' We present a statistical analysis investigating the value of environmental data and microbial community structure independently and in combination for explaining rates of carbon and nitrogen cycling processes within 82 global datasets. Environmental variables were the strongest predictors of process rates but left 44% of variation unexplained on average, suggesting the potential for microbial data to increase model accuracy. Although only 29% of our datasets were significantly improved by adding information on microbial community structure, we observed improvement in models of processes mediated by narrow phylogenetic guilds via functional gene data, and conversely, improvement in models of facultative microbial processes via community diversity metrics. Our results also suggest that microbial diversity can strengthen predictions of respiration rates beyond microbial biomass parameters, as 53% of models were improved by incorporating both sets of predictors compared to 35% by microbial biomass alone. Our analysis represents the first comprehensive analysis of research examining links between microbial community structure and ecosystem function. Taken together, our results indicate that a greater understanding of microbial communities informed by ecological principles may enhance our ability to predict ecosystem process rates relative to assessments based on environmental variables and microbial physiology.

Up to date a few electroactive bacteria embedded in biofilms are described to catalyze both anodic and cathodic reactions in bioelectrochemical systems (i.e. bidirectional electron transfer). How these bacteria transfer electrons to or from the electrode is still uncertain. In this study the extracellular electron transfer mechanism of bacteria within an electroactive biofilm was investigated by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). First, a mature anodic electroactive biofilm was developed from an activated sludge sample (inoculum), acetate as electron donor and a poised electrode (+397mV vs. SHE). Later, this biofilm was "switched" to biocathodic conditions by feeding it with a medium containing nitrates and poising the electrode at -303mV vs. SHE. The electrochemical characterization indicated that both, acetate oxidation and nitrate reduction took place at a similar formal potential of -175±05 and -175±34mV vs. SHE, respectively. The biofilm was predominantly composed by Geobacter sp. at both experimental conditions. Taken together, the results indicated that both processes could be catalyzed by using the same electron conduit, and most likely by the same bacterial consortium. Hence, this study suggests that electroactive bacteria within biofilms could use the same electron transfer conduit for catalyzing anodic and cathodic reactions., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Incubation of carboxydotrophs at 37 °C provides optimal conditions for their growth. However, a fast accumulation of organic acids, specifically acetate, during the exponential growth phase may result in low alcohol production and substrate consumption due to a phenomenon known as "acid crash". The present work investigates growth and productivity of Clostridium carboxidivorans P7 at two incubation temperatures. At 37 °C the culture was not able to override the "acid crash", resulting in low ethanol titers (1.56 mM). On the other hand, lower metabolic rates at 25 °C enhanced ethanol and butanol production (32.1 and 14.5 mM, respectively). Moreover, at low temperatures, hexanol and caproic acid were also produced at significant concentrations, 8.21 and 9.02 mM respectively, among the highest values reported for P7. Our results demonstrate that production of biofuels with longer carbon chains molecules may be enhanced incubating syngas-fermenting acetogenic bacteria at sub-optimal temperatures., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Conventional swine manure treatment is performed by anaerobic digestion, but nitrogen is not treated. Microbial Fuel Cells (MFCs) allow organic matter and nitrogen removal with concomitant electricity production. MFC microbiomes treating industrial wastewaters as swine manure have not been characterized. In this study, a multidisciplinary approach allowed microbiome relation with nutrient removal capacity and electricity production. Two different MFC configurations (C-1 and C-2) were used to treat swine manure. In C-1, the nitrification and denitrification processes took place in different compartments, while in C-2, simultaneous nitrification-denitrification occurred in the cathode. Clostridium disporicum and Geobacter sulfurreducens were identified in the anode compartments of both systems. C. disporicum was related to the degradation of complex organic matter compounds and G. sulfurreducens to electricity production. Different nitrifying bacteria populations were identified in both systems because of the different operational conditions. The highest microbial diversity was detected in cathode compartments of both configurations, including members of Bacteroidetes, Chloroflexiaceae and Proteobacteria. These communities allowed similar removal rates of organic matter (2.02-2.09 kg COD m(-3)d(-1)) and nitrogen (0.11-0.16 kg Nm(-3)d(-1)) in both systems. However, they differed in the generation of electric energy (20 and 2 mW m(-3) in C-1 and C-2, respectively)., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Gasification of sewage sludge allows the recovery of energy, and produces a mix of CO, CO₂and H₂called synthesis gas (or syngas), which can be fermented by acetogenic bacteria to added-value products. This work presents the conversion of syngas to organic acids and alcohols using both pure and mixed cultures. Pure culture kinetic experiments with Clostridium carboxidivorans P7 resulted in the production of high concentrations of acetate (454 mgC/L) and ethanol (167 mgC/L). The pH was the main factor driving solventogenesis, with about 50% of the products in the form of alcohols at pH 5. Conversely, laboratory-scale experiments using a carboxydotrophic mixed culture of the genus Clostridium enriched from anaerobic digester sludge of a municipal wastewater treatment plant was capable of producing mainly butyrate, with maximum concentration of 1,184 mgC/L.