Search

This study evaluated the impact of silver particles, suspended in Arnica montana flower extract, on the physicochemical characteristics and release dynamics of antioxidant compounds in PVP (polyvinylpyrrolidone)-based hydrogel systems. The hydrogels were synthesized via photopolymerization with fixed amounts of crosslinker (PEGDA) and photoinitiator, while the concentration of the silver-infused extract was systematically varied. Key properties, including the density, porosity, surface roughness, swelling capacity, and water vapor transmission rate (WVTR), were quantitatively analyzed. The results demonstrated that increasing the silver content reduced the hydrogel density from 0.6669 g/cm 3 to 0.2963 g/cm 3 and increased the porosity from 4% to 11.04%. The surface roughness parameters (Ra) rose from 8.42 µm to 16.33 µm, while the WVTR increased significantly from 65.169 g/m 2 ·h to 93.772 g/m 2 ·h. These structural changes directly influenced the release kinetics of antioxidant compounds, with kinetic modeling revealing silver-dependent variations in the evaluated release mechanisms. This innovative approach of integrating silver particles and plant-derived antioxidants into hydrogels highlights a novel pathway for tailoring material properties. The observed enhanced porosity and moisture regulation underscore the hydrogels' potential for biomedical applications, particularly in wound care, where controlled moisture and antioxidant delivery are critical. These findings provide new insights into how silver particles modulate hydrogel structures and functionalities.

Modern oncology increasingly relies on the role of proteins as key components in cancer diagnosis, prognosis, and targeted therapy. This review examines advancements in protein biomarkers across several cancer types, including breast cancer, lung cancer, ovarian cancer, and hepatocellular carcinoma. These biomarkers have proven critical for early detection, treatment response monitoring, and tailoring personalized therapeutic strategies. The article highlights the utility of targeted therapies, such as tyrosine kinase inhibitors and monoclonal antibodies, in improving treatment efficacy while minimizing systemic toxicity. Despite these advancements, challenges like tumor resistance, variability in protein expression, and diagnostic heterogeneity persist, complicating universal application. The review underscores future directions, including the integration of artificial intelligence, advanced protein analysis technologies, and the development of combination therapies to overcome these barriers and refine personalized cancer treatment.

This study focuses on the selection and evaluation of a kinetic model for the release of vitamin C from different delivery systems, including microcapsules, hydrogels, and a hybrid system combining both. The microcapsules were synthesized from a 2% sodium alginate solution and with vitamin C incorporated in selected formulations. Hydrogels were obtained through photopolymerization using poly(ethylene glycol) diacrylate and polyvinyl alcohol, with and without the addition of vitamin C. The hybrid system incorporated the vitamin C-containing microcapsules within the hydrogel matrix. Physicochemical properties, such as density, porosity, and water vapor transmission rate (WVTR), were evaluated. Kinetic studies of vitamin C release were conducted under dynamic and static conditions, and the experimental data were fitted to six different kinetic models: zero-order, first-order, second-order, Higuchi, Korsmeyer-Peppas, and Hixson-Crowell. The Higuchi and Korsmeyer-Peppas models provided the best fit for most systems, indicating that the release is predominantly controlled by diffusion and, in dynamic conditions, swelling of the matrix. The hybrid system, while exhibiting slower release than the microcapsules and hydrogel alone, demonstrated more controlled and sustained release, which is advantageous for applications requiring prolonged action.

Hard bone disease is a clinical problem affecting more than 20 million people annually worldwide, with significant health, social, and economic consequences. For successful integration of any implant, the key aspects are bone regeneration, osseointegration at the bone-implant interface, and the mitigation of inflammation. The purpose of this research work is to demonstrate an innovative material system and method of biomaterial preparation for regenerative medicine. A number of studies were carried out for both hydroxyapatite powder and composites. Wet-precipitated synthesized hydroxyapatite was compared to commercial products through accurate physicochemical studies that confirmed the high purity of the obtained calcium phosphate without any impurities. Ti/HAp composites before and after sintering were compared by XRF, XRD, SEM, EDS, PSA, and roughness measurements, and the Vickers microhardness was analyzed. The fabrication of the biomaterial was based on a bottom-up approach, which involved fabricating HAp particles with specific morphologies using powder metallurgy (PM) to sinter Ti composites. The resulting gradient structures consisting of two compositions (5%HAp%5CMC and 10%HAp10%CMC) mimic the structure of bone tissue. The created pores of 10-100 µm in size will allow bone cells to penetrate the implant and regenerate bone. In turn, the introduction of hydroxyapatite into the material reduces the microhardness of the composite and introduces properties such as bioactivity. The developed composite material contains a combination of Ti alloy and hydroxyapatite (HAp), creating an excellent biomaterial that promotes bone growth and eliminates the problem of implant loosening by integrating it into the bone. This material requires further research, especially biological research. However, it shows promising potential for further experiments.

The article explores innovative methods for creating high-insulation walls, essential for the future of energy-efficient and sustainable construction. It focuses on advanced 3D-printing technologies that allow for the construction of walls with superior insulation materials, optimizing thermal properties and significantly reducing energy for heating and cooling. The integration of thermal insulation within wall structures and innovations in building materials like lightweight composites, aerogels, and nanotechnology-based insulations are highlighted. It discusses the environmental, economic, and technical benefits of these innovations and the challenges to fully leverage 3D printing in construction. Future development directions emphasize materials that enhance thermal efficiency, sustainability, and functionality, promising a new era of sustainable and innovative construction practices.

Three-dimensional printing technology in construction is a rapidly growing field that offers innovative opportunities for design and construction execution. A key component of this process is the automated production of high-performance construction mixtures that meet specific requirements for strength, fluidity, and setting speed. This overview article outlines the history and development of 3D printing technology in the construction industry, describes various printing technologies, and discusses the properties and requirements for construction mixes. Special attention is given to automated systems for batching and mixing ingredients, which increase the precision and efficiency of production. The different types of construction mixes used in 3D printing and the main technical and operational challenges associated with their application are also presented. The article's conclusions highlight the potential of this technology to revolutionize the construction industry by improving efficiency and reducing costs and project lead times.

In recent years, the utilization of natural components has become crucial across various industries, including medicine. Particularly in biomedical contexts, hydrogel materials are of significant importance. Therefore, the objective of this research was to develop and analyze hydrogel materials infused with vitamin C. A key focus of this study was to conduct multiple syntheses with varying levels of vitamin C to explore the feasibility of creating materials with adjustable properties. The produced hydrogels underwent comprehensive physicochemical evaluation. The findings of this examination verified the correlation between the vitamin C content and the specific characteristics of the hydrogels. It was determined from these results that the samples displayed both sorptive and antioxidative capabilities, enabling their potential application in wound dressings or other biomedical uses. A notable benefit of these hydrogels is their adaptability, allowing for modifications to achieve desired attributes tailored to particular applications.

Bone tissue regeneration is one of the main areas of tissue engineering. A particularly important aspect is the development of new innovative composite materials intended for bone tissue engineering and/or bone substitution. In this article, the synthesis and characterization of ceramic-polymer composites based on polyvinylpyrrolidone, poly(vinyl alcohol) and hydroxyapatite (HAp) have been presented. The first part of the work deals with the synthesis and characterization of the ceramic phase. It was demonstrated that the obtained calcium phosphate is characterized by a heterogeneity and porosity indicating simultaneously its large specific surface area. Additionally, in the wound healing test, it was shown that the obtained powder supports the regeneration of L929 cells. Next, HAp-containing composite materials were obtained in the waste-free photopolymerization process and characterized in detail. It was proved that the obtained composites were characterized by sorption properties and stability during 12-day incubation in simulated physiological liquids. Importantly, the obtained composites showed no cytotoxic effect against the L929 murine fibroblasts - the cell viability was 94.5%. Then, confocal microscopy allowed to observe that murine fibroblasts effectively colonized the surface of the obtained polymer-ceramic composites, covering the entire surface of the biomaterial. Thus, the obtained results confirm the high potential of the obtained composites in the application of bone tissue regenerative medicine., (© 2023 Wiley Periodicals LLC.)

The use of natural ingredients in recent years has been of great importance in many industries and medicine. In biomedical applications, hydrogel materials also play a significant role. In view of this, the aim of this study was to synthesize and characterize hydrogel materials enriched with broadleaf linden hydrolate. An important aspect was to carry out a series of syntheses with varying types and amounts of crosslinking agents so as to test the possibility of synthesizing materials with controlled properties. The obtained hydrogels were subjected to detailed physicochemical analysis. The results of the tests confirmed the relationship between the selected properties and the type of crosslinking agent used. A crosslinking agent with a lower molar mass (575 g/mol) results in a material with a compact and strongly crosslinked structure, which is characterized by high surface roughness. The use of a crosslinking agent with a molecular weight of 700 g/mol resulted in a material with a looser-packed polymer network capable of absorbing larger amounts of liquids. The work also proved that regardless of the type of crosslinking agent used, the addition of linden hydrolate provides antioxidant properties, which is particularly important in view of the target biomedical application of such materials.

Hydrogel materials are used in many fields of science and industry. They are of particular importance in biomedical applications. In this work, hydrogels were obtained that could act as a dressing for wounds, at the same time being a carrier of substances with antioxidant activity. The discussed materials were obtained in the field of UV radiation. The correlation between the amount of photoinitiator used and the physicochemical properties and surface morphology of the obtained materials was investigated. In addition, the hydrogels have been incorporated with wild rose extract, which is characterized by antioxidant and anti-inflammatory effects. The analysis of the sorption capacity confirmed that the obtained material is able to absorb significant amounts of incubation fluids, which, in terms of application, will enable the absorption of exudate from the wound. The highest stability of materials was noted for hydrogels obtained with the use of intermediate amounts of photoinitiator, i.e., 50 µL and 70 µL. In the case of using 20 µL or 100 µL, the photopolymerization process did not proceed properly and the obtained material was characterized by a lack of homogeneity and high brittleness. With the increase in the amount of photoinitiator, an increase in the surface roughness of hydrogel materials was confirmed. In turn, spectroscopic analysis ruled out the degradation of materials in incubation fluids, indicating the potential for their use in biomedical applications.

Injection molding is a method commonly used to manufacture plastic products. This technology makes it possible to obtain products of specially designed shape and size. In addition, the developed mold allows for repeated and repeatable production of selected plastic parts. Over the years, this technology grew in importance, and nowadays, products produced by injection molding are used in almost every field of industry. This paper is a review and provides information on recent research reports in the field of modern injection molding techniques. Selected plastics most commonly processed by this technique are discussed. Next, the chosen types of this technique are presented, along with a discussion of the parameters that affect performance and process flow. Depending on the proposed method, the influence of various factors on the quality and yield of the obtained products was analyzed. Nowadays, the link between these two properties is extremely important. The work presented in the article refers to research aimed at modifying injection molding methods enabling high product quality with high productivity at the same time. An important role is also played by lowering production costs and reducing the negative impact on the environment. The review discusses modern injection molding technologies, the development of which is constantly progressing. Finally, the impact of the technology on the ecological environment is discussed and the perspectives of the process were presented.

The interest in the application of plant extracts as modifiers of polymers intended for biomedical purposes is constantly increasing. The therapeutical properties of the licorice root, including its anti-inflammatory and antibacterial activity, make this plant particularly promising. The same applies to silver nanoparticles showing antibacterial properties. Thus the main purpose of the research was to design hydrogel dressings containing both licorice root extract and nanosilver so as to obtain a system promoting wound regeneration processes by preventing infection and inflammation within the wound. The first step included the preparation of the plant extract via the solid-liquid extraction using the Soxhlet extractor and the synthesis of silver nanoparticles by the chemical reduction of silver ions using a sodium borohydride as a reducing agent. Subsequently, hydrogels were synthesized via photopolymerization and subjected to studies aiming at characterizing their sorption properties, surface morphology via scanning electron microscopy, and their impact on simulated physiological liquids supported by defining these liquids' influence on hydrogels' structures by FT-IR spectroscopy. Next, the tensile strength of hydrogels and their percentage elongation were determined. Performed studies also allowed for determining the hydrogels' wettability and free surface energies. Finally, the cytotoxicity of hydrogels towards L929 murine fibroblasts via the MTT reduction assay was also verified. It was demonstrated that developed materials showed stability in simulated physiological liquids. Moreover, hydrogels were characterized by high elasticity (percentage elongation within the range of 24-29%), and their surfaces were hydrophilic (wetting angles below 90°). Hydrogels containing both licorice extract and nanosilver showed smooth and homogeneous surfaces. Importantly, cytotoxic properties towards L929 murine fibroblasts were excluded; thus, developed materials seem to have great potential for application as innovative dressings.

The research subject of this paper are natural polymer-based hydrogels modified with albumin particles. The proteins were obtained via the salt-induced precipitation method, and next characterized using dynamic light scattering (DLS), UV-Vis spectroscopy and FT-IR spectroscopy. The most favorable composition showing monodispersity and particles with a size lower than 40 nm was selected for modification of hydrogels. Such systems were obtained via the photopolymerization performed under the influence of UV radiation using diacrylate poly(ethylene glycol) as a crosslinking agent and 2-hydroxy-2-methylpropiophenone as a photoinitiator. Next, the hydrogels' swelling ability, mechanical properties, wettability and surface morphology were characterized. Moreover, FT-IR spectroscopy, incubation studies in simulated physiological liquids, pro-inflammatory activity analysis and MTT reduction assay with L929 murine fibroblasts were performed. The release profiles of proteins from hydrogels were also verified. Materials modified with proteins showed higher swelling ability, increased flexibility even by 50% and increased surface hydrophilicity. Hydrogels' contact angles were within the range 62-69° while the tensile strength of albumin-containing hydrogels was approx. 0.11 MPa. Furthermore, the possibility of the effective release of protein particles from hydrogels in acidic environment (approximately 70%) was determined. Incubation studies showed hydrogels' stability and lack of their degradation in tested media. The viability of fibroblasts was 89.54% for unmodified hydrogel, and approx. 92.73% for albumin-modified hydrogel, and such an increase indicated the positive impact of the albumin on murine fibroblast proliferation.

Hydrogels belong to the group of polymers with a three-dimensional crosslinked structure, and their crosslinking density strongly affects their physicochemical properties. Here, we verified the impact of both the average molecular weight of crosslinking agents used during the photopolymerization of hydrogels and that of their content on selected properties of these materials. First, PVP-based hydrogels modified with Aloe vera juice and L-ascorbic acid were prepared using UV radiation. Next, their surface morphology was characterized via optical scanning electron microscopy, whereas their chemical structure was investigated by FT-IR spectroscopy. Moreover, we verified the tendency of the hydrogels to degrade in selected physiological liquids, as well as their tensile strength, percentage of elongation, and swelling capability. We found that the more crosslinking agent in the hydrogel matrix, the higher its tensile strength and the less elongation. The hydrogels showed the highest stability during incubation in SBF and 2% hemoglobin solution. A sharp decrease in the pH of distilled water observed during the incubation of the hydrogels was probably due to the release of Aloe vera juice from the hydrogel matrices. This was additionally confirmed by the decrease in the intensity of the absorption band derived from the polysaccharides included in this additive and by the decrease in the swelling ratio after 48 h. Importantly, all hydrogels demonstrated swelling properties, and it was proven that the higher content of the crosslinking agent in hydrogels, the lower their swelling ability.

Hydrogels belong to the group of polymers that are more and more often considered as innovative dressing materials. It is important to develop materials showing the most advantageous properties from the application viewpoint wherein in the case of hydrogels, the type and the amount of the crosslinking agent strongly affect their properties. In this work, PVP-based hydrogels containing Aloe vera juice and L-ascorbic acid were obtained via UV-induced polymerization. Next, their surface morphology (via both optical, digital and scanning electron microscope), sorption capacity, tensile strength, and elongation were characterized. Their structure was analyzed via FT-IR spectroscopy wherein their impact on the simulated body liquids was verified via regular pH and temperature measurements of these liquids during hydrogels' incubation. It was demonstrated that as the amount of the crosslinker increased, the polymer structure was more wrinkled. Next, hydrogels showed relatively smooth and only slightly rough surface, which was probably due to the fact that the modifiers filled also the outer pores of the materials. Hydrogels demonstrated buffering properties in all incubation media, wherein during the incubation the release of Aloe vera juice probably took place as evidenced by the decrease in the pH of the incubation media and the disappearance of the absorption band deriving from the polysaccharides included in the composition of this additive. Next, it was proved that as the amount of the crosslinker increased, hydrogels' crosslinking density increased and thus their swelling ratio decreased. Hydrogels obtained using a crosslinking agent with higher average molecular weight showed higher swelling ability than the materials synthesized using crosslinker with lower average molecular weight. Moreover, as the amount of the crosslinking agent increased, the tensile strength of hydrogels as well as their percentage elongation also increased.

In recent times, a great interest is directed to developing biomaterials incorporated with various therapeutical substances which may enhance them with new properties and thus increase their application potential. In this work, polyvinylpyrrolidone (PVP)-based hydrogels modified with Aloe vera juice and vitamin C and differing in the amount of the photoinitiator used during their synthesis were developed. Analysis of hydrogels included characterization of their chemical structure via FT-IR spectroscopy, sorption properties, wettability, surface morphology, behavior in simulated physiological liquids and mechanical properties. Finally, hydrogels' cytotoxicity towards L929 murine fibroblasts using MTT reduction assay was additionally verified. It was demonstrated that as the amount of the photoinitiator used during the synthesis of hydrogels increased, the smoother their surface and the higher their hydrophilicity. Next, the greater the amount of the photoinitiator, the lower is the percentage elongation of the hydrogel and the greater the hardness. In turn, the swelling ability of hydrogels depended strongly on the type of the absorbed liquid-swelling ratios of samples in distilled water were 24% higher than in SBF, 18% higher than in Ringer liquid, and 32% higher than in hemoglobin wherein the amount of the photoinitiator did not affect this property. Additionally, hydrogels were stable and did not degrade in simulated physiological liquids. The only changes in pH of the incubation media were probably caused by the active substances release from hydrogels which was also confirmed via a lesser intensity of the absorption band on FT-IR spectra corresponding to the functional group occurring in compounds included in Aloe vera juice. Importantly, the viability of fibroblasts incubated with developed materials was at least 86%. Thus the hydrogels, due to their properties, seem to show application potential to be used for biomedical purposes, e.g., as innovative dressing materials.