Search

Based on the current UK decarbonization policy, a general outlook on potential routes for the glass industry to achieve net‐zero is discussed and the differentiation during decarbonization is specified. Biomass ash is considered a potential alternative raw material for low‐carbon glass manufacture as it is rich in certain advantageous components, chiefly network modifiers. Simple sieving processes were shown to effectively separate impurities such as S, Cl, and C from some biomass ashes according to particle size distribution. The concentration of undesirable impurities decreased with increasing particle size. Morphologies and X‐ray diffraction patterns of larger washed biomass ash particles indicated liquid/amorphous phase formation during biomass combustion. The washing of ashes was also shown to be a potential route to purification. A washed bracken ash relevant to both modern and ancient glass production was characterized for comparison. Ultraviolet‐visible near‐infrared (UV‐Vis‐near IR) absorption spectra of representative green container glasses produced using biomass ash confirmed that ∼5 wt.% ash in representative glass batches has little impact on the color and redox state of glasses; the redox status of glass produced using >2 mm biomass ash after washing was less reduced than that of glass produced using high levels (>∼9 wt.%) of >2 mm biomass ash after sieving alone, observed via the redox couple Cr3+/Cr6+ by UV‐Vis‐near IR absorption spectroscopy. [ABSTRACT FROM AUTHOR]

The energy intensive and CO2-generating nature of commercial mineral wool and glass production necessitates advances and changes in materials and processes. The derivation of raw materials from waste products arising from biomass energy generation offers the possibility of a two-fold environmental benefit: partial replacement of carbonate raw minerals in production, leading to lower CO2 release during melting; and the utilisation and valorisation of byproducts which may otherwise be sent to landfill. Glass samples with a basaltic mineral wool composition were produced with additions to the raw materials of 0, 1, 5 and 10 wt% of a fly ash and a bottom ash arising from biomass combustion. The resulting glasses were analysed by x-ray fluorescence (XRF), x-ray diffraction (XRD), dilatometry, 57Fe Mössbauer and Raman spectroscopies, and their densities, molar volumes and viscosity-temperature profiles were calculated and compared against benchmark glass samples. All biomass ash-containing glasses were closely similar in both composition and properties to the benchmark glass, with up to 10 wt% ash additions to the raw materials. In addition, the use of the biomass fly ash led to a reduction in batch CO2 content estimated to be 1·5 kg CO2 per tonne of batch for each 1 wt% addition. These initial results provide evidence supporting the further development of these ash materials as potential value-added raw materials for mineral wool manufacture. [ABSTRACT FROM AUTHOR]