Search

This paper presents a novel approach for extracting 3D weld point information using a two-stage deep learning pipeline based on readily available 2D RGB cameras. Our method utilizes YOLOv8s for object detection, specifically targeting vertices, followed by semantic segmentation for precise pixel localization. This pipeline addresses the challenges posed by low-contrast images and complex geometries, significantly reducing costs compared with traditional 3D-based solutions. We demonstrated the effectiveness of our approach through a comparison with a 3D-point-cloud-based method, showcasing the potential for improved speed and efficiency. This research advances the field of automated welding by providing a cost-effective and versatile solution for extracting key information from 2D images. [ABSTRACT FROM AUTHOR]

The use of both hands is a common practice in everyday life. The capacity to interact with the environment is largely dependent on the ability to use both hands. A thorough review of the current state of the art reveals that commercially available prosthetic hands designed for children are very different in functionality from those developed for adults, primarily due to prosthetic hands for adults featuring a greater number of actuated joints. Many times, patients stop using their prosthetic device because they feel that it does not fit well in terms of shape and size. With the idea of solving these problems, the design of HandBot-Kid has been developed with the anthropomorphic qualities of a child between the ages of eight and twelve in mind. Fitting the features of this age range, the robotic hand has a length of 16 cm, width of 7 cm, thickness of 3.6 cm, and weight of 328 g. The prosthesis is equipped with a total of fifteen degrees of freedom (DOF), with three DOFs allocated to each finger. The concept of design for manufacturing and assembly (DFMA) has been integrated into the development process, enabling the number of parts to be optimized in order to reduce the production time and cost. The utilization of 3D printing technology in conjunction with aluminum machining enabled the manufacturing process of the robotic hand prototype to be streamlined. The flexion–extension movement of each finger exhibits a trajectory that is highly similar to that of a real human finger. The four-bar mechanism integrated into the finger design achieves a mechanical advantage (MA) of 40.33% and a fingertip pressure force of 10.23 N. Finally, HandBot-Kid was subjected to a series of studies and taxonomical tests, including Cutkosky (16 points) and Kapandji (4 points) score tests, and the functional results were compared with some commercial solutions for children mentioned in the state of the art. [ABSTRACT FROM AUTHOR]

This paper presents the development of an optical force sensor architecture directed to prototyping and cost-effective applications, where the actual force requirements are still not well defined or the most suitable commercial technologies would highly increase the cost of the device. The working principle of this sensor consists of determining the displacement of a lens by measuring the distortion of a refracted light beam. This lens is attached to an elastic interface whose elastic constant is known, allowing the estimation of the force that disturbs the optical system. In order to satisfy the requirements of the design process in an inexpensive way, this sensor can be built by fast prototyping technologies and using non-optical grade elements. To deal with the imperfections of this kind of manufacturing procedures and materials, four fitting models are proposed to calibrate the implemented sensor. In order to validate the system, two different sensor implementations with measurement ranges of ±45 N and ±10 N are tested with the proposed models, comparing the resulting force estimation with respect to an industrial-grade load cell. Results show that all models can estimate the loads with an error of about 6% of the measurement range. [ABSTRACT FROM AUTHOR]

This paper presents a novel kinematic reconstruction of the human arm chain with five degrees of freedom and the estimation of the shoulder location during rehabilitation therapy assisted by end-effector robotic devices. This algorithm is based on the pseudoinverse of the Jacobian through the acceleration of the upper arm, measured using an accelerometer, and the orientation of the shoulder, estimated with a magnetic angular rate and gravity (MARG) device. The results show a high accuracy in terms of arm joints and shoulder movement with respect to the real arm measured through an optoelectronic system. Furthermore, the range of motion (ROM) of 50 healthy subjects is studied from two different trials, one trying to avoid shoulder movements and the second one forcing them. Moreover, the shoulder movement in the second trial is also estimated accurately. Besides the fact that the posture of the patient can be corrected during the exercise, the therapist could use the presented algorithm as an objective assessment tool. In conclusion, the joints' estimation enables a better adjustment of the therapy, taking into account the needs of the patient, and consequently, the arm motion improves faster. [ABSTRACT FROM AUTHOR]