Search

Nanomaterials bring to expression unique electronic properties that promote advanced functionality and technologies. Albeit, nanoscale growth presents paramount challenges for synthesis limiting the diversity in structures and compositions. Here, we demonstrate solid-state topotactic exchange that converts Wurtzite InAs nanowires into Zintl phase Eu$_3$In$_2$As$_4$ nanowires. In situ evaporation of Eu and As over InAs nanowire cores in molecular beam epitaxy results in mutual exchange of Eu from the shell and In from the core. A continuous Eu$_3$In$_2$As$_4$ shell thereby grows that gradually consumes the InAs core and converts it into a single phase Eu$_3$In$_2$As$_4$ nanowire. Topotaxy, which facilitates the mutual exchange, is supported by the substructure of the As matrix which is similar across the Wurtzite InAs and Zintl Eu$_3$In$_2$As$_4$. We provide initial evidence of an antiferromagnetic transition at T$_N$ $\sim$ 6.5 K in the Zintl phase Eu$_3$In$_2$As$_4$ nanowires. Ab initio calculation confirms the antiferromagnetic state and classifies Eu$_3$In$_2$As$_4$ as a $C_2 T$ axion insulator hosting both chiral hinge modes and unpinned Dirac surface states. The topotactic mutual-exchange growth of Zintl Eu$_3$In$_2$As$_4$ nanowires thus enables the exploration of intricate magneto-topological states of nanomaterials. Moreover, it may open the path for topotactic mutual-exchange synthesis of nanowires made of other exotic compounds., Comment: 45 pages, 23 figures

First-principle calculations were employed to analyze the effects induced by vacancies of molybdenum (Mo) and sulfur (S) on the dielectric properties of few-layered MoS2. We explored the combined effects of vacancies and dipole interactions on the dielectric properties of few-layered MoS2. In the presence of dielectric screening, we investigated uniformly distributed Mo and S vacancies, and then considered the case of concentrated vacancies. Our results show that the dielectric screening remarkably depends on the distribution of vacancies owing to the polarization induced by the vacancies and on the interlayer distances. This conclusion was validated for a wide range of wide-gap semiconductors with different positions and distributions of vacancies, providing an effective and reliable method for calculating and predicting electrostatic screening of dimensionally reduced materials. We further provided a method for engineering the dielectric constant by changing the interlayer distance, tuning the number of vacancies and the distribution of vacancies in few-layered van der Waals materials for their application in nanodevices and supercapacitors.

The exploration of magnetic topological insulators is instrumental in exploring axion electrodynamics and intriguing transport phenomena, such as the quantum anomalous Hall effect. Here, we report that a family of magnetic compounds Eu$_{2n+1}$In$_{2}$(As,Sb)$_{2n+2}$ ($n=0,1,2$) exhibit both gapless Dirac surface states and chiral hinge modes. Such a hybrid-order topology hatches surface-dependent quantum geometry. By mapping the responses into real space, we demonstrate the existence of chiral hinge modes along the $c$ direction, which originate from the half-quantized anomalous Hall effect on two gapped $ac$/$bc$ facets due to Berry curvature, while the unpinned Dirac surface states on the gapless $ab$ facet generate an intrinsic nonlinear anomalous Hall effect due to the quantum metric. When Eu$_{3}$In$_{2}$As$_{4}$ is polarized to the ferromagnetic phase by an external magnetic field, it becomes an ideal Weyl semimetal with a single pair of type-I Weyl points and no extra Fermi pocket. Our work predicts rich topological states sensitive to magnetic structures, quantum geometry-induced transport and topological superconductivity if proximitized with a superconductor., Comment: 11 pages, 5 figures

Two dimensional (2D) semiconductors present unique opportunities to intertwine optical and magnetic functionalities and to tune these performances through defects and dopants. Here, we integrate exciton pumping into a quantum sensing protocol on nitrogen-vacancy centers in diamond to image the optically-induced transient stray fields in few-layer, antiferromagnetic CrCl$_3$. We discover that exciton recombination enhances the in-plane magnetization of the CrCl$_3$ layers, with a predominant effect in the surface monolayers. Concomitantly, time-resolved photoluminescence measurements reveal that nonradiative exciton recombination intensifies in atomically thin CrCl$_3$ with tightly localized, nearly dipole-forbidden excitons and amplified surface-to-volume ratio. Supported by experiments under controlled surface exposure and density functional theory calculations, we interpret the magnetically enhanced state to result from a defect-assisted Auger recombination that optically activates electron transfer between water vapor related surface impurities and the spin-polarized conduction band. Our work validates defect engineering as a route to enhance intrinsic magnetism in single magnetic layers and opens a novel experimental platform for studying optically-induced, transient magnetism in condensed matter systems., Comment: 11 pages, 8 figures

Controlling and understanding electron correlations in quantum matter is one of the most challenging tasks in materials engineering. In the past years a plethora of new puzzling correlated states have been found by carefully stacking and twisting two-dimensional van der Waals materials of different kind. Unique to these stacked structures is the emergence of correlated phases not foreseeable from the single layers alone. In Ta-dichalcogenide heterostructures made of a good metallic 1H- and a Mott-insulating 1T-layer, recent reports have evidenced a cross-breed itinerant and localized nature of the electronic excitations, similar to what is typically found in heavy fermion systems. Here, we put forward a new interpretation based on first-principles calculations which indicates a sizeable charge transfer of electrons (0.4-0.6 e) from 1T to 1H layers at an elevated interlayer distance. We accurately quantify the strength of the interlayer hybridization which allows us to unambiguously determine that the system is much closer to a doped Mott insulator than to a heavy fermion scenario. Ta-based heterolayers provide therefore a new ground for quantum-materials engineering in the regime of heavily doped Mott insulators hybridized with metallic states at a van der Waals distance., Comment: 9 pages, 5 figures

There has been budding demand for the fast, reliable, inexpensive, non-invasive, sensitive, and compact sensors with low power consumption in various fields, such as defence, chemical sensing, health care, and safe environment monitoring units. Particularly, an efficient detection of chemical warfare agents (CWAs) is of great importance for the safety and security of the humans. Inspired by this, we explored molybdenum carbide MXenes (Mo2CTx; Tx= O, F, S) as efficient sensors towards selected CWAs, such as arsine (AsH3), mustard gas (C4H8Cl2S), cyanogen chloride (NCCl), and phosgene (COCl2) both in aqueous and non-aqueous mediums. Our van der Waals corrected density functional theory (DFT) calculations reveal that the CWAs bind with Mo2CF2, and Mo2CS2 monolayers under strong chemisorption with binding energies in the range of -2.33 to -4.05 eV, whereas Mo2CO2 results in comparatively weak bindings of -0.29 to -0.58 eV. We further report the variations in the electronic properties, electrostatic potentials and work functions of Mo2CTx upon the adsorption of CWAs, which authenticate an efficient sensing mechanism. Statistical thermodynamic analysis is applied to explore the sensing properties of Mo2CTx at various of temperatures and pressures. We believe that our findings will pave the way to an innovative class of low-cost reusable sensors for the sensitive and selective detection of highly toxic CWAs in air as well as in aqueous media.

Van der Waals epitaxy on the surface of two-dimensional (2D) layered crystals has gained significant research interest for the assembly of well-ordered nanostructures and fabrication of vertical heterostructures based on 2D crystals. Although van der Waals epitaxial assembly on the hexagonal phase of transition metal dichalcogenides (TMDCs) has been relatively well characterized, a comparable study on the distorted octahedral phase (1T' or Td) of TMDCs is largely lacking. Here we investigate the assembly behavior of one-dimensional (1D) AgCN microwires on various distorted TMDC crystals, namely 1T'-MoTe2, Td-WTe2, and 1T'-ReS2. The unidirectional alignment of AgCN chains is observed on these crystals, reflecting the symmetry of underlying distorted TMDCs. Polarized Raman spectroscopy and transmission electron microscopy directly confirm that AgCN chains display the remarkable alignment behavior along the distorted chain directions of underlying TMDCs. The observed unidirectional assembly behavior can be attributed to the favorable adsorption configurations of 1D chains along the substrate distortion, which is supported by our theoretical calculations and observation of similar assembly behavior from different cyanide chains. The aligned AgCN microwires can be harnessed as facile markers to identify polymorphs and crystal orientations of TMDCs., Comment: 23 pages, 6 main figures

Using density functional theory (DFT) calculations, we investigated the adsorption of CO2 molecules on 3d transition metal (TM)-benzene complexes. Our calculations show that the maximum number of CO2 molecules adsorbable on Sc or Ti atoms is three, but the 18-electron rule predicts it should be four. The 18-electron rule is generally successful in predicting the maximum H2 adsorption number for TM atoms including Sc or Ti atoms. We found that the 18-electron rule fails to correctly predict CO2 binding on Sc- or Ti-benzene complexes because CO2 binding, in contrast to H2 binding, requires additional consideration for steric hindrance due to the large bond length of CO2. We calculated the occupation function for CO2 using the Tolman cone angle, which shows that three CO2 molecules fully occupy the available space around Sc- and Ti-benzene complexes. This estimation is the same maximum CO2 adsorption number predicted by DFT calculations. Therefore, we propose that the occupation function for CO2 using the Tolman cone angle is an efficient model for evaluating steric hindrance of CO2 adsorption on a surface., Comment: 17 pages, 4 figures, 1 table

Nano-materials, such as metal-organic frameworks, have been considered to capture CO$_2$. However, their application has been limited largely because they exhibit poor selectivity for flue gases and low capture capacity under low pressures. We perform a high-throughput screening for selective CO$_2$ capture from flue gases by using first principles thermodynamics. We find that elements with empty d orbitals selectively attract CO$_2$ from gaseous mixtures under low CO$_2$ pressures at 300 K and release it at ~450 K. CO$_2$ binding to elements involves hybridization of the metal d orbitals with the CO$_2$ $\pi$ orbitals and CO$_2$-transition metal complexes were observed in experiments. This result allows us to perform high-throughput screening to discover novel promising CO$_2$ capture materials with empty d orbitals and predict their capture performance under various conditions. Moreover, these findings provide physical insights into selective CO$_2$ capture and open a new path to explore CO$_2$ capture materials., Comment: 17 pages, 6 figures