Search

Summary: In a wind energy conversion system (WECS) based on a doubly fed induction generator (DFIG), a fast and smooth automatic synchronization of the DFIG with the utility grid is always desirable. Additionally, elimination of the need for a speed encoder makes the synchronization process much more reliable. This paper proposes a modified voltage controller‐based automatic grid‐synchronization strategy for the DFIG‐WECS using a rotor‐current‐dependent model‐reference‐adaptive‐system (MRAS) for rotor‐speed/position estimation. A V/f control‐based starting strategy is used to start the DFIG. An improved decoupled DFIG stator voltage controller is proposed to enhance the transient response during the DFIG grid synchronization. The modified controller is implemented in a grid‐voltage‐oriented reference frame to synchronize the DFIG‐stator with the grid. A robust modified MRAS with higher noise immunity and reduced machine parameter dependency is used to estimate the rotor‐speed/position during synchronization control. To validate the performance of the proposed strategy, a DFIG‐based WECS is modeled and simulated using an OPAL‐RT real‐time simulator, where a motor‐generator setup is modeled to have an equivalent WECS configuration. As compared with the latest reported work, this approach reduces the synchronization time by 16.99% while ensuring a smooth synchronization with no stator inrush‐current, even without any speed/position encoder. [ABSTRACT FROM AUTHOR]

Thirty seven genotypes of Morus alba L. from the trans-Himalaya with white, pink and black fruit were studied to find out variability and relationship of fruit color and sampling location with total antioxidant capacity, total polyphenol content (TPC), total flavonoid content (TFC) and total anthocyanin content (TAC) in fruit. The ferric reducing antioxidant potential (FRAP) ranged from 34.2 to 46.2 μmol Fe(II)/g DW. TPC ranged from 1.8 to 8.3 mg gallic acid equivalent (GAE)/g DW. The TFC ranged from 0.4 to 0.9 mg quercetin equivalent/g DW. Two way analysis of variance (ANOVA) revealed that fruit color has no significant relationship with TPC and TAC. However, fruit color showed inconsistent effect on antioxidant capacity as determined by different methods. Sampling location has significant effect on antioxidant capacity, TPC, TFC and TAC. Interaction between fruit color and sampling location showed significant effect on antioxidant capacity and TAC. The study therefore showed that source of genotypes from different sampling location is more important as compare to fruit color in determining antioxidant capacity, TPC, TFC and TAC in M. alba fruit from the trans-Himalaya. [ABSTRACT FROM AUTHOR]

Genome scan was done with 439 dominant marker loci to identify outlier loci in three populations of Morus alba from the trans-Himalayan region. Employing finite and hierarchical island population genetic models, we detected 30 (6.85%) loci under selection, of which 3.64% were under directional selection and 3.19% under balancing selection. The hierarchical island model was efficient in detecting signatures of natural selection with low occurrence of false positives. Data showed significant spatial genetic structure (SGS), especially in population from Nubra valley with significantly high SGS. Bayesian approach revealed high genetic differentiation and inbreeding in Nubra population. Indus and Suru valleys populations showed comparatively low SGS, genetic differentiation, and inbreeding. The study showed that M. alba falls in the range of mixed mating and outcrossing species. However, the population of Nubra valley showed selfing with high SGS. Significant SGS strengthens the presence of natural selection in M. alba natural populations. [ABSTRACT FROM AUTHOR]

Immature seeds were cultured on 10 different media for germination. Maximum germination was achieved on Lindeman orchid medium (37.12%) within 17 days of culturing. Protocorms with leaf primordia were cultured on BM-2 and 7 different modifications of Murashige and Skoog (MS) medium with various hormone combinations [0-3 mg/L indole butyric acid (IBA) and 0-3 mg/L kinetin (Kin)] for plantlet regeneration and mass multiplication. Maximum number of shoots (18.12 ± 0.3), highest shoot length (17.80 cm ± 2.16), maximum root number (8.25 ± 0.69), and highest root length (8.02 cm ± 1.45) were found on MS medium with 3 mg/L IBA and 1 mg/L Kin. Plantlets with 2-3 shoots were transferred to different potting mixtures for acclimatization to field conditions and further multiplication. One hundred percent survival was obtained in C-8 potting mixture consisting of cocopeat + vermiculite + perlite (1:1:1), which produced 75 shoots (25 plantlets) after 1 month of transplantation in the greenhouse. The current study describes for the first time a rapid in vitro protocorm development and mass multiplication protocol for Dactylorhiza hatagirea (D.Don) Soo that holds robust potential for large-scale propagation and metabolite production. [ABSTRACT FROM AUTHOR]

Sequence-related amplified polymorphism markers were used to assess the genetic structure in three natural populations of Morus alba from trans-Himalaya. Multilocation sampling was conducted across 14 collection sites. The overall genetic diversity estimates were high: percentage polymorphic loci 89.66%, Nei's gene diversity 0.2286, and Shannon's information index 0.2175. At a regional level, partitioning of variability assessed using analysis of molecular variance (AMOVA), revealed 80% variation within and 20% among collection sites. Pattern appeared in STRUCTURE, BARRIER, and AMOVA, clearly demonstrating gene flow between the Indus and Suru populations and a geographic barrier between the Indus-Suru and Nubra populations, which effectively hinders gene flow. The results showed significant genetic differentiation, population structure, high to restricted gene flow, and high genetic diversity. The assumption that samples collected from the three valleys represent three different populations does not hold true. The fragmentation present in trans-Himalaya was more natural and less anthropogenic. [ABSTRACT FROM AUTHOR]

Highlights: [•] Dactylorhiza hatagirea (D. Don) is an endangered orchid possessing high medicinal value. [•] NJ and Bayesian clustering analysis indicated that two clusters were gathered. [•] Habitat fragmentation from human pressure is the main threats for this species. [•] A proper conservation strategy is proposed for this endangered species. [ABSTRACT FROM AUTHOR]

• Novel set of resiliency metrics for underground distribution system are proposed. • A decision support tool is proposed for the network operator to enable resiliency. • Impact analysis is made by simulation study on a 110 Bus real distribution system. Natural disasters cause substantial damage to power distribution infrastructure with long duration of power outages. A resilient Power Distribution System (PDS) should be able to quickly absorb, adapt and recover from the catastrophic events. Enabling resiliency in the PDS is a new imperative for utilities to reduce financial losses, enhance customer satisfaction and supply critical loads in the network. Modern underground PDS comprise of underground feeders and overhead components. Though, these PDS are considered to be highly reliable; however, they still remain vulnerable to catastrophic events by virtue of their locations, age, maintenance and other factors. These factors have a direct impact on resiliency assessment of the system. Quick and accurate decision making by the network operator during and immediately after a natural disaster can make significant impact on the restoration of the system, particularly critical loads. This paper proposes a set of metrics for evaluation of resiliency for underground power distribution networks and a decision support tool for the network operator to enable resiliency in a PDS during network planning and operational contingency scenarios. It facilitates the decision making process to supply all critical loads in the network under all possible scenarios. The proposed decision support tool to enable resiliency is tested through simulation study on a real 110 Bus, 11 kV, underground PDS of CESC Limited, in Patuli area of Kolkata, India. [ABSTRACT FROM AUTHOR]

Abstract: It has become imperative for the power and energy engineers to look out for the renewable energy sources such as sun, wind, geothermal, ocean and biomass as sustainable, cost-effective and environment friendly alternatives for conventional energy sources. However, the non-availability of these renewable energy resources all the time throughout the year has led to research in the area of hybrid renewable energy systems. In the past few years, a lot of research has taken place in the design, optimization, operation and control of the renewable hybrid energy systems. It is indeed evident that this area is still emerging and vast in scope. The main aim of this paper is to review the research on the unit sizing, optimization, energy management and modeling of the hybrid renewable energy system components. Developments in research on modeling of hybrid energy resources (PV systems), backup energy systems (Fuel Cell, Battery, Ultra-capacitor, Diesel Generator), power conditioning units (MPPT converters, Buck/Boost converters, Battery chargers) and techniques for energy flow management have been discussed in detail. In this paper, an attempt has been made to present a comprehensive review of the research in this area in the past one decade. [Copyright &y& Elsevier]

Most of the available directional relaying schemes use the phase angle information of sequence components of voltage and current with a cycle or more as the decision time. Converter interfaced solar photovoltaic plants are subjected to follow grid codes, leading to significant voltage and current modulation compared to conventional synchronous machines based sources. This may result in malfunction of existing directional relaying. This paper presents a high-speed time-domain directional relaying method using only phase fault current for distribution systems in the presence of solar plant. The method proposes a fault direction discrimination function, and its sign provides the direction of fault. The proposed method is tested for various control options embedded in solar plant, fault parameters, and noisy signals in CIGRE 14-bus distribution system integrating solar plant. Results validate the ability of the proposed method to decide within one-fourth of a cycle following fault detection for both PV plant side as well as grid end. Comparative assessment reveals the superiority of the proposed current based direction relaying method over the existing technique. [ABSTRACT FROM AUTHOR]

This manuscript presents a novel control architecture for the E-STATCOM (STATCOM integrated with Energy Storage System (ESS)) that is common for both the Stand-Alone (SA) as well as the Grid-Connected (GC) modes of operation of a microgrid operating under unbalanced conditions. The proposed control architecture fulfils the aim of regulating the E-STATCOM in such a manner so as to smoothen the power fluctuations of a nearby renewable energy source (solar, wind, etc) and also to maintain the voltage and frequency at the Point of Common Coupling (PCC) within the normal range of operation. Hence, the resultant real power injected by the renewable energy source along with the E-STATCOM is constant in magnitude, irrespective of whether the microgrid is in the GC or the SA mode of operation. Dynamically varying limits are introduced to provide inherent VSC over-current protection. In order to illustrate the performance of these control architectures, a model of the IEEE 34 node power distribution network that is being supplied by a solar Photo-Voltaic (PV) Distributed Generation (DG) unit, a wind DG unit and two identical E-STATCOMs (for compensating the power fluctuations from the PV and wind DG units) has been considered for study in PSCAD/EMTDC. [ABSTRACT FROM AUTHOR]

For fault ride-through requirement, solar photovoltaic (PV) plant remains connected to the grid during a fault. In such a situation, a PV plant operates in different modes and supplies current to comply with the requirements of the grid. The relative magnitude of phase current contributed by a PV plant during a fault is at par with the nominal current. Such a fault behavior restricts the application of available phase current based relaying approaches while protecting the distribution system with a PV plant. A protection method using local positive sequence voltage and current is proposed to protect a distribution system with PV plant. The method selects pickup current using proposed current-voltage curve for fault detection. A three-dimensional time-current-voltage characteristic is proposed for trip time calculation. Performance of the proposed method is tested for relays on both PV plant side and grid end using DigSilent PowerFactory simulation data for a CIGRE 14-bus distribution system with PV plant having different modes of operations. The method is found to be accurate and comparative assessment reveals its superiority. [ABSTRACT FROM AUTHOR]

Distribution lines are generally protected by overcurrent relays. With the integration of an inverter-interfaced solar photovoltaic (PV) plant having a current-limiting feature, the fault current seen by the relay on the PV side of that feeder becomes comparable to the load current. The conventional overcurrent relaying principle is not suitable for distribution line protection. Distance relay may be a viable option for protection of distribution lines connecting the solar PV plant. However, positive- and negative-sequence source impedances of the PV plant depend on an inverter controller, which results in limited performance of fixed setting distance relay. This article proposes an adaptive distance relay setting to protect distribution line connecting the PV plant, using prefault voltage and current data at the relaying point. The method calculates positive- and negative-sequence PV source impedances for boundary setting of distance relay at the PV side. The proposed trip boundary is modified adaptively with the change in prefault conditions of the PV plant. Performance of the proposed method is tested for different control strategies and operating capacities of the PV plant and variation in the grid source impedance on a 34-bus distribution system. Real-time application of the proposed method is validated in hardware-in-the-loop using OPAL-RT simulators with IEC 61850 as the communication protocol and found to be accurate. [ABSTRACT FROM AUTHOR]

This article proposes modeling and two controller design techniques for a triple active bridge (TAB) three-port dc–dc converter comprising of fuel cell, battery, and load. The sources are integrated, employing boost interleaved full-bridge converters in order to get smoother source current profile. The converter is a nonlinear multi-input multi-output (MIMO) system with a large number of control variables. Moreover, a high degree of coupling among the control variables makes its modeling and control system design quite cumbersome and complex. To overcome the complexity of analysis in a higher order system like TAB, a generalized frequency-domain modeling technique is introduced in this article. A new decoupling matrix-based proportional-integral controller design method is also proposed. It reduces the design complexity and improves the system dynamic performance (lower settling time, overshoot/undershoot in the controlled variables) in comparison to similar three-port converters reported in the literature. Further, the performance of the proposed controller is compared by simulation with another popular MIMO system controller design technique, namely the state feedback control. A 1-kW laboratory prototype is built and tested to verify the system performance during dynamic load changes, source current variation, and battery charging/discharging operation. [ABSTRACT FROM AUTHOR]

This paper proposes a jellyfish search algorithm (JSA)-based offline method to design a DC voltage controller of AC/DC front-end converter (FEC) in a doubly fed induction generator (DFIG)-based wind energy conversion system (WECS). First, a multi-objective tuning problem is formulated using a full-order converter model to achieve maximum utilization of converter parameters in controller design. Next, a normalized mono-objective problem is developed using a utopia-tracking approach to reduce the computational complexity in design. Finally, the mono-objective problem is solved using JSA to enhance the controller performance by obtaining optimal gain values for the controller. A comparative study is performed with other metaheuristic optimization techniques to justify the use of JSA in this application. The results confirm that the accuracy of the JSA-based approach is higher, whereas the execution time of the method is lower than the other methods. Furthermore, to validate the performance of the proposed approach, a DFIG-based WECS is modeled and simulated using OPAL-RT real-time simulator. A grid voltage-oriented vector control is used as the overall control algorithm for the FEC. Unlike the conventional pole-zero cancellation method, the proposed approach provides no voltage overshoot during voltage development. Compared to the published literature, it also ensures 40.65% lesser voltage deviation without any overcurrent, irrespective of wind speed and load variations. [ABSTRACT FROM AUTHOR]

This manuscript develops a unified control structure for Distributed Generation (DG) units based on Voltage Source Converters considering unbalanced and non-linear operating conditions. This control structure works for both the Islanded and the Grid-connected modes of operation of the Micro-Grid (MG). The objective of this control scheme is to regulate the line currents of the DG unit in such a manner that the voltage at the Point of Common Coupling (PCC) remains balanced despite the line currents of the DG unit being unbalanced and distorted. Multiple adaptive P-R controllers have been proposed for the current control loop of the Voltage Source Converter (VSC). These controllers have been implemented with resettable integrators so as to limit the DC components in the post fault current of the VSC. The Battery Energy Storage System (BESS) is interfaced to the DC link of the VSC through bi-directional dc-dc converters. An improved control structure for the bi-directional dc-dc converter has been developed. The effectiveness of these control structures have been presented and tested in PSCAD/EMTDC in an IEEE 34 node distribution system model being fed by two identical DG units. [ABSTRACT FROM AUTHOR]

The winter annuals Brassica tournefortii and Raphanus raphanistrum (Brassicaceae) share similar habitats and life-history traits, but differ in their reproduction system (self-compatibility vs. self-incompatibility, respectively). The two phylogenetically close species offer means to assess the effect of reproductive biology on genetic diversity between and within populations. In general, genetic diversity between populations of B. tournefortii was higher than that found between populations of R. raphanistrum , while higher genetic diversity indices were evident within populations of R. raphanistrum. In addition, the results of pairwise genetic distances indicated that the genetic distances between populations can be associated to the species' reproductive biology and not to the population's distribution pattern. We discuss whether knowledge of reproductive and habitat characteristics can be used to predict genetic diversity when planning sampling scheme for ex situ conservation. [ABSTRACT FROM AUTHOR]

• Unique set of physical system metrics for overhead power distribution network (OPDN) and inclusion of normalization and inverse effect of metrics in the resiliency assessment process. • A methodology for resiliency quantification using DPC, kth-order additive fuzzy measure and CI that accurately represents the interaction and individual importance of various resiliency metrics. • An algorithm for resiliency enabling under normal operating condition and operational contingency scenario with an ability to detect and analyze sub-networks formed during the HILP events. • Resiliency enhancement methodology that correlates the system hardening measures employed in the OPDN with that of the incremental improvement in resiliency of the FNs and performs the cost-benefit analysis. The natural disasters that are classified as high impact low probability (HILP) events have a major effect on the power system infrastructure, in particular, the overhead power distribution networks (OPDNs) causing significant challenges in maintaining continuity of service to critical loads (CLs). A resilient OPDN should maintain operational normalcy by quickly absorbing, adapting and recovering from the HILP events resulting in an improved customer satisfaction through continuity of electricity supply and minimal safety hazards. Modern OPDS predominantly consists of overhead electric lines and poles with diverse characteristics by virtue of their age, maintenance, location etc. Unlike the normal operating conditions, quick and accurate decision making from the network operator becomes very critical in maintaining the resiliency of a OPDN during HILP events. This paper proposes a novel framework for resiliency assessment, quantification, enabling and enhancement that facilitates resilient reconfiguration of an OPDN during HILP events. Two novel physical system metrics with multiple sub- factors specific to the overhead networks are also proposed for resiliency assessment followed by resiliency quantification using diamond pairwise comparison, kth -order additive fuzzy measure and Choquet integral. The resiliency enabling and enhancement algorithms for contingency scenarios as well as cost-benefit analysis for network planning strategies are presented in this work. The novel resiliency framework presented in this work is used to enable the resiliency of a OPDN and provide the relevant information about the feasible network options with their resiliency value. The performance of the proposed framework is illustrated on the 415V OPDN in Nayabad area of the CESC Limited, Kolkata, India through simulation case studies. [ABSTRACT FROM AUTHOR]

Communication-assisted distance protection schemes are widely used for three-terminal line protection and are susceptible to power swings. The available differential protection scheme is also considered to be suited to protect three-terminal lines and is free from problems associated with the power swing. However, the performance of the current differential protection scheme may be affected if an outfeed condition occurs during an internal fault. This paper presents a new technique for protecting three-terminal transmission lines immune to power swing. The technique uses synchronized voltage and current measurements from three terminals for calculating voltage at the tee-point. The maximum magnitude of the superimposed component of positive-sequence voltage estimated at the tee-point is compared with the maximum magnitude of superimposed componentas of the positive-sequence voltage measured at three terminals of the line to discriminate a fault from power swing. The method is accurate even for an outfeed condition during the internal fault, current-transformer saturation during severe internal or external faults, large load rejection, and different prefault loading conditions occur during the power swing. The proposed algorithm is verified using data simulated through EMTDC/PSCAD for a 400-kV double-circuit three-terminal system. [ABSTRACT FROM AUTHOR]

Maloperation of the zone 3 element of distance relays during stressed system conditions, such as power swing, load encroachment, or voltage stressed condition is one of the main reasons for large disturbances in power systems. The improved protection technique for zone 3 can help to prevent such maloperation and, thus, more reliable power systems can be envisaged. This paper proposes an algorithm that utilizes two new criteria: 1) the maximum value of the transient monitoring function obtained from three-phase currents and 2) the phase angle of the positive-sequence impedance to support zone 3 of the distance relay. The technique is tested for various power system events, such as the three-phase fault during the power swing, load encroachment, voltage stressed conditions, and current-transformer saturation during the three-phase fault using data simulated through EMTDC/PSCAD in the IEEE 39-bus New England system. The simulation results show that the zone 3 protection scheme using the proposed technique can correctly discriminate the three-phase fault from stressed system conditions. [ABSTRACT FROM PUBLISHER]

This paper presents a synchronized phasor measurement-based wide-area backup protection scheme which compares the magnitude of sequence voltages of buses at a system protection center to identify the bus closest to the fault. Then, the sign of cosine of the angle between voltage and current at both ends of all lines connected to this bus are compared to identify the faulted branch. The technique is tested for various faults resulting in voltage/current inversion in a series-compensated line and during load encroachment and power swing conditions using data simulated through EMTDC/PSCAD for a nine-bus, three-machine power system. The scheme is found to be accurate and fast. With today's synchronized phasor measurement technology and communication system, the proposed scheme can overcome the limitations of the conventional backup protection scheme. [ABSTRACT FROM AUTHOR]

Abstract: Successful integration of plug-in hybrid electric vehicles (PHEVs) into the power system is a major challenge for the future smart grid. As a result, this topic has attracted the attention of researchers from different communities in the past few years. Recent research progress has addressed different technical aspects of PHEV integration into the smart grid; such as charging and control strategies of PHEVs, vehicle-to-grid (V2G) technology, and several application domains, such as wind energy integration, frequency regulation, design of parking areas and participation in electricity markets. Most of these works require formulation of mathematical models which extensively use artificial intelligence techniques, intelligent methods and agent-based computing approaches to solve the computational problems. This paper presents a comprehensive survey of different research problems and their solution approaches in the context of PHEV integration to smart grid. [Copyright &y& Elsevier]

A distance relaying scheme is susceptible to power swing. To avoid unintended trip operation during such conditions, a power swing blocking function is utilized in distance relays. However, if a fault occurs during power swing, the relay should detect the fault and trip as soon as possible. The detection of fault in a series-compensated line during the power swing is further complicated due to complex transients produced by series capacitor and the metal–oxide varistor (MOV) protecting it. This paper proposes a negative-sequence current-based technique for detecting all types of faults during the power swing in a series-compensated line. The technique is tested for different series-compensated systems including a 9-bus 3-machine power system. Different types of faults: symmetrical, asymmetrical, and high resistance occurring during the power swing are simulated through EMTDC/PSCAD to test the algorithm. The method is compared with available techniques and found to be accurate and fast. [ABSTRACT FROM PUBLISHER]

GTR1 and GTR2 transporters are components of the source to sink translocation network of glucosinolates, which are major defence metabolites in the Brassicaceae. These transporters can be genetically manipulated for reduction of seed‐glucosinolates without inhibiting glucosinolate biosynthesis, thereby maintaining the inherent defence potential of plants. However, the different roles of GTRs in influencing tissue‐specific distribution of glucosinolates in agriculturally important Brassica crops are yet unknown. Here, we report functional characterization of two groups of glucosinolate transporters (GTR1 and GTR2) from Brassica juncea based on gene expression data, biochemical analysis, gene‐complementation studies in GTR‐deficient mutants and RNAi‐based knockdown followed by insect feeding experiments. Although both GTRs showed ubiquitous expression patterns and broad substrate specificity, the single‐gene knockdown lines displayed different phenotypes. The GTR2‐knockdown plants showed a significant reduction of glucosinolates in seeds and a higher accumulation in leaves and pods, while the GTR1‐knockdown plants displayed a smaller reduction of glucosinolates in seeds and significantly lower glucosinolate levels in leaves. Consequently, knockdown of GTR2 resulted in higher resistance towards the generalist pest, Spodoptera litura. Overall, our study highlights the distinctive roles of B. juncea GTRs in tissue‐specific accumulation of glucosinolates and the potential for manipulating GTR2 for enhanced nutrition and plant defence. The glucosinolate transporters GTR1 and GTR2 exhibit differential potential for tissue‐specific manipulation of glucosinolate content for enhanced nutrition and defence traits in the oilseed, Brassica juncea. [ABSTRACT FROM AUTHOR]

Multiple microgrids (MMGs) may be interconnected through voltage source converters (VSC) for controlled power sharing among themselves. VSCs in large interconnected micro- grids may use non-communication based droop control to share total power demand in the ratio of their droop coefficients. However, a constant droop ratio restricts the power delivery capability of the VSCs although surplus power may be available in their respective sources. In this paper, along with a unified power management strategy for intra and inter microgrid power sharing in a hybrid AC-DC MMG system, a novel adaptive droop control algorithm is presented that dynamically changes droop coefficients of the VSCs to ensure maximum utilization of available resources in each microgrid under different operating modes. Stability analysis of the proposed control method is performed and comparison of the system performance with fixed and adaptive droop ratio is illustrated by simulating the MMG in MATLAB SIMULINK using real solar irradiance field data. It is validated from simulation results that the adaptive droop control method increases utilization of renewable energy sources within microgrids and reduces energy import from utility grid. [ABSTRACT FROM AUTHOR]

As grid codes evolve, inverter-interfaced renewable generation may be required to take greater responsibility for grid support. It may be obliged to source a large current during a short-circuit fault in the grid and provide large dynamic reactive power, beyond the inverter rating, for voltage recovery after the fault clearance. In this sense, the inverter-interfaced generating system would behave more similarly to a conventional synchronous machine. This is not yet mandatory but current technology cannot readily support it if required in the future, because the power semiconductors would overheat unless they are drastically derated. This study proposes a method to increase the power semiconductor's transient thermal capacity, and hence its short-term over-current capability, by integrating a phase-change material inside the power semiconductor module. Experiment and thermodynamic simulation across different materials are used to illustrate the feasibility of the concept and the factors that should be considered in such a design. The study shows that 1.5 p.u. (per unit) overcurrent could be achieved for 30 s, which is typical of synchronous generators; and 3.0 p.u. fault current could be achieved for 3 s. A custom-made 1200-V, 50-A IGBT half-bridge module integrating a liquid metal as the phase change material is compared with a conventional commercially available module. A validated simulation model is then used to further evaluate the proposal, regarding a 1700-V, 1000-A IGBT module for use in a wind turbine. [ABSTRACT FROM AUTHOR]