Search

This paper investigates the structure and phase composition of Al–TiB2 metal matrix composites prepared from the Al–Ti–B system powder using self-propagating high-temperature synthesis (SHS) in semi-industrial conditions (the amount of the initial powder mixture was 1000 g). The samples produced in semi-industrial conditions do not differ from the laboratory samples, and consist of the aluminum matrix and TiB2 ceramic particles. The temperature rise leads to the growth in the average size of TiB2 particles from 0.4 to 0.6 µm as compared to the laboratory samples. SHS-produced composites are milled to the average particle size of 42.3 µm. The powder particles are fragmented, their structure is inherited from the SHS-produced Al–TiB2 metal matrix composite. The obtained powder can be used as the main raw material and additive in selective laser sintering, vacuum sintering, and hot pressing products. It is worth noting that these products can find their own application in the automotive industry: brake pads, drums, rail discs, etc. [ABSTRACT FROM AUTHOR]

This paper studies the impact of the mass fraction of NiTi–TiB2 particles obtained by the method of self-propagating high-temperature synthesis (SHS) on the phase composition, structure, and mechanical properties of composites made by direct laser deposition from an Inconel 625–NiTiz–TiB2 powder mixture. Composites were obtained from a powder mixture with the mass fraction of particles at 5–10 wt%, and they consisted of an Inconel 625 metal matrix wherein ceramic inclusions of titanium diboride TiB2 were distributed. Increasing the mass fraction of SHS-produced NiTi particles from 30 to 95 wt% led to the emergence of a NiTi intermetallide phase in the matrix material as well as an increase in the average TiB2 particle size and formation of their agglomerates. In addition, an increase in the microhardness of the materials was observed. The graph of tensile strength of Inconel 625–NiTi–TiB2 samples has a parabolic shape with a maximum at 1000 MPa (when the mass fraction of SHS-produced NiTi–TiB2 particles is at 30 wt%). A further increase in the mass fraction of NiTi–TiB2 led to a decrease in the tensile strength down to 400 MPa. Here the deformation of samples decreases linearly as the ratio of composite particles in the initial mixture increases. From a comparative analysis of the results obtained, the optimal mass fraction of composite NiTi–TiB2 particles in the Inconel 625-NiTi–TiB2 powder mixture was found to be 5 wt%. [ABSTRACT FROM AUTHOR]

This research work studies the structural phase parameters and physicomechanical properties of metal-matrix composite materials based on a Ni–TiB2 system obtained by additive manufacturing (specifically, direct laser deposition). The properties of the composites obtained were investigated at high temperatures (up to 1000 °C). The feasibility of the fabrication of a composite nanostructure of alloy with advanced physicomechanical properties was shown. The introduction of reinforcing TiB2 particles into an Inconel 625 matrix was confirmed to increase the microhardness and tensile strength of the material obtained. Apparently, the composite structure of the samples facilitates the realisation of several strengthening mechanisms: (1) a grain boundary mechanism that causes strengthening and dislocation movement; (2) a mechanism based on the grain structure breakdown and Hall–Petch relationship realisation. [ABSTRACT FROM AUTHOR]