Search

Liquid phase axial mixing studies have been carried out in the novel solid–liquid circulating fluidized bed (SLCFB). The SLCFB primarily consists of a single multistage column (having an inner diameter of 100 mm i.d. and length of 1.40 m) which is divided into two sections wherein both the steps of utilization, namely loading (e.g., adsorption and catalytic reaction) and regeneration of solid phase, can be carried out simultaneously in continuous mode. Weak base anion exchange resin was used as the solid phase, whereas water as the fluidizing medium. The effects of physical properties of solid phase, superficial liquid velocity, and solid circulation rate on liquid phase axial dispersion coefficient were investigated. The dispersion coefficient increases monotonically with an increase in the size of solid particle, superficial liquid velocity, and solid circulation rate. The axial dispersion model (ADM) was used to model experimental residence time distribution (RTD) data. A good agreement was found between ADM predictions and the experimental measurements. A unified correlation has also been proposed to determine dispersion coefficient as a function of physical properties of solid and liquid phases, superficial liquid velocity, and solid circulation rate based on all previous and present experimental data on multistage SLCFB.

Amino acids are vital precursors in many biochemical production pathways in addition to efficient nitrogen source which could enhance microbial growth yields. Therefore, in present study, the effect of amino acids from aliphatic and aromatic family was comprehensively evaluated in batch and integrated fed batch fermentation system. Clostridium acetobutylicum NRRL B-527 was able to utilize 54.15 ± 1.0 g/L glucose to produce 12.43 ± 0.10 g/L butanol under batch cultivation. Interestingly, a significant step up in butanol titer (20.82 ± 0.33 g/L)was achieved by using fed-batch fermentation process integrated with liquid–liquid extraction module. Besides, mathematical modeling studies demonstrated the best fitting of experimental data with first order reaction kinetics. Overall, an enhancement in solvent titer by induction of essential cellular components coupled with advance bioprocess strategy was successfully utilized in this study for its further applications.

Solid-liquid circulating fluidized beds (SLCFBs) offer several attractive features over conventional solid-liquid fluidized beds such as efficient liquid-solid contact, favorable mass and heat transfer, reduced back-mixing of phases, and integrated reactor and regenerator design. These unique features have stimulated theoretical and experimental investigations over the past two decades on transport phenomena in SLCFBs. However, there is a need to compile and analyze the published information with a coherent theme to design and develop SLCFB with sufficient degree of confidence for commercial application. Therefore, the present work reviews and analyzes the literature on hydrodynamic, mixing, heat transfer, and mass transfer characteristics of SLCFBs comprehensively. Suitable recommendations have also been made for future work in concise manner based on the knowledge gaps identified in the literature. Furthermore, a novel multistage SLCFB has been proposed to overcome the limitations of existing SLCFBs. The proposed model of SLCFB primarily consists of a single multistage column which is divided into two sections wherein both the steps of utilization viz. loading (adsorption, catalytic reaction, etc.) and regeneration of solid phase could be carried out simultaneously on a continuous mode.

Biorefinery sector has become a serious dispute for cleaner and sustainable development in recent years. In the present study, pretreatment of pineapple peel waste was carried out in high pressure reactor using various pretreatment-enhancers. The type and concentration effect of each enhancer on hemicellulose solubilization was systematically investigated. The binary acid (phenol + sulfuric acid) at 180 °C was found to be superior amongst other studied enhancers, giving 81.17% (w/v) hemicellulose solubilization in liquid-fraction under optimized conditions. Solid residue thus obtained was subjected to enzymatic hydrolysis that resulted into 24.50% (w/v) cellulose breakdown. Treated solid residue was further characterized by scanning electron microscopy and fourier transform infrared spectroscopy to elucidate structural changes. The pooled fractions (acid treated and enzymatically hydrolyzed) were fermented using Clostridium acetobutylicum NRRL B 527 which resulted in butanol production of 5.18 g/L with yield of 0.13 g butanol/g sugar consumed. Therefore, pretreatment of pineapple peel waste evaluated in this study can be considered as milestone in utilization of low cost feedstock, for bioenergy production.

The present work proposes a novel radially cross-flow multistage solid-liquid circulating fluidized bed (SLCFB). The SLCFB primarily consists of a single multistage column (having an inner diameter of 100. mm and length of 1.40. m), which is divided into two sections wherein both the steps of utilization or loading (e.g., adsorption and catalytic reaction) and regeneration of the solid phase can be carried out simultaneously in continuous mode. The hydrodynamic characteristics were studied using ion exchange resin as the solid phase and water as the fluidizing medium. The loading and flooding states were determined for three particle sizes; i.e., 0.30, 0.42, and 0.61. mm. The effects of the superficial liquid velocity and solid feed rate on the solid hold-up were investigated under loading and flooding conditions. The solid hold-up increases with an increase in the solid feed rate and decreases with an increase in the superficial liquid velocity. An artificial-intelligence formalism, namely the multilayer perceptron neural network (MLPNN), was employed for the prediction of the solid hold-up. The input space of MLPNN-based model consists of four parameters, representing operating and system parameters of the proposed SLCFB. The developed MLPNN-based model has excellent prediction accuracy and generalization capability.

Efficient yet economic production of biofuel(s) using varied second-generation feedstock needs to be explored in the current scenario to cope up with global fuel demand. Hence, the present study was performed to reveal the use of cauliflower waste for acetone–butanol–ethanol (ABE) production using Clostridium acetobutylicum NRRL B 527. The proximate analysis of cauliflower waste demonstrated to comprise 17.32% cellulose, 9.12% hemicellulose, and 5.94% lignin. Drying of cauliflower waste was carried out in the temperature range of 60–120 °C to investigate its effect on ABE production. The experimental drying data were simulated using moisture diffusion control model. The cauliflower waste dried at 80 °C showed maximum total sugar yield of 26.05 g L−1. Furthermore, the removal of phenolics, acetic acid, and total furans was found to be 90–97, 10–40, and 95–97%, respectively. Incidentally, maximum ABE titer obtained was 5.35 g L−1 with 50% sugar utilization.