Search

Abstract Neural stimulation and modulation at high spatial resolution are crucial for mediating neuronal signaling and plasticity, aiding in a better understanding of neuronal dysfunction and neurodegenerative diseases. However, developing a biocompatible and precisely controllable technique for accurate and effective stimulation and modulation of neurons at the subcellular level is highly challenging. Here, we report an optomechanical method for neural stimulation and modulation with subcellular precision using optically controlled bio-darts. The bio-dart is obtained from the tip of sunflower pollen grain and can generate transient pressure on the cell membrane with submicrometer spatial resolution when propelled by optical scattering force controlled with an optical fiber probe, which results in precision neural stimulation via precisely activation of membrane mechanosensitive ion channel. Importantly, controllable modulation of a single neuronal cell, even down to subcellular neuronal structures such as dendrites, axons, and soma, can be achieved. This bio-dart can also serve as a drug delivery tool for multifunctional neural stimulation and modulation. Remarkably, our optomechanical bio-darts can also be used for in vivo neural stimulation in larval zebrafish. This strategy provides a novel approach for neural stimulation and modulation with sub-cellular precision, paving the way for high-precision neuronal plasticity and neuromodulation.

IntroductionThe massive loss of global glacier mass caused by climate problems has caused concern, while the Earth’s rotation as the most significant form of motion has also been subtly affected. However, the quantitative effects of massive glaciers losing mass on Earth’s rotation have not been revealed.MethodsHerein, the knowledge of moment of inertia and suitable rotational inertia models in classical mechanics is initially utilized to assess the effect of quantitative glaciers losing mass on Earth's rotation.ResultsAfter specific calculations, the putative 200 billion tons of glaciers losing mass bring on an increase of 1.4099×10-4s in Earth’s rotation time in 365 days.DiscussionThis work examines the connection between glaciers losing mass and Earth’s rotation from classical mechanics, thus providing the way for investigations of relationship between climate changes and Earth.

Abstract Large‐scale particle manipulation with single‐particle precision and further flexible patterning into functional structures is of huge potentials in many fields including bio‐optoelectronic sensing, colloidal lithography, and wearable devices. However, it is very challenging for the precision manipulation and flexible patterning of particles on complicated curved and functional substrates. In this work, opto‐thermal‐tension (OTT) mediated precision large‐scale particle manipulation and flexible patterning based on soap film are reported. Flexible manipulation and subsequent patterning of particles with single‐particle resolution is realized by optothermal regulated surface tension on soap films. Reconfigurable patterning of particle structures with different shapes as well as large‐scale ordered structures (up to 2000 particles) with particle sizes spanning two orders of magnitude (0.5–20 µm) is realized using this OTT mediation method. Importantly, due to the high flexibility of soap films, the patterned large‐scale particle structures can be non‐destructively transferred to curved and rough substrates, including rough iron pipe surface, leaf and skin surface. This OTT mediated method provides a new method for precision large‐scale particle manipulation and flexible patterning with high versatility on complicated functional substrates, with great potentials for optoelectronic and biophotonic sensing and wearable device design on different curved and rough functional substrates.

Abstract As promising energy-storage devices, zinc–air batteries (ZABs) exhibit slow reaction kinetics for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) occurring at their electrodes. High-performance bifunctional catalysts must thus be synthesized to accelerate the reversible conversion of oxygen and improve the rate and overall performance of ZABs. Herein, we reported the promising prospects of self-supported composite electrodes composed of wood-derived carbon (WDC) and bimetallic cobalt-iron alloys/oxides (CoFe-CoFe2O4@WDC) as efficient electrocatalysts for alkaline ORR/OER. WDC provided a favorable three-phase interface for heterogeneous reactions owing to its layered porous structure and genetic stability, thereby enabling mass diffusion and improving reaction kinetics. The CoFe2O4 spinel surface was reduced to bimetallic CoFe alloy to form abundant heterostructure interfaces that promote electron transfer. Under alkaline conditions, the optimized composite electrode exhibited a remarkable high half-wave potential of 0.85 V and an exceptionally low overpotential of 1.49 V. It also exhibited stable performance over an impressive 2340 cycles in a ZAB. Theoretical calculations also confirmed that the heterointerface addresses the issue of proton scarcity throughout the reaction and actively facilitates the creation of O–O bonds during the reversible transformation of oxygen. This study introduces a new concept for developing bifunctional and efficient electrocatalysts based on charcoal and encourages the sustainable and high-value use of forest biomass resources. Graphical Abstract

Abstract Background Evidence on the effectiveness of influenza vaccination in the elderly is limited, and results are controversial. There are also few reports from China. Methods We conducted a test-negative case-control study design to estimate influenza vaccine effectiveness (VE) against laboratory-confirmed influenza-associated visits among elderly (aged ≥ 60 years) across four influenza seasons in Ningbo, China, from 2018 to 19 to 2021-22. Influenza-positive cases and negative controls were randomly matched in a 1:1 ratio according to age, sex, hospital, and date of influenza testing. We used logistic regression models to compare vaccination odds ratios (ORs) in cases to controls. We calculated the VE as [100% × (1-adjusted OR)] and calculated the 95% confidence interval (CI) around the estimate. Results A total of 30,630 elderly patients tested for influenza with virus nucleic acid or antigen during the study period. After exclusions, we included 1 825 influenza-positive cases and 1 825 influenza-negative controls. Overall, the adjusted VE for influenza-related visits was 63.5% (95% CI, 56.3–69.5%), but varied by season. Influenza VE was 59.8% (95% CI, 51.5–66.7%) for influenza A and 89.6% (95% CI, 77.1–95.3%) for influenza B. The VE for ages 60–69 and 70–79 was 65.2% (95% CI, 55.4–72.9%) and 69.8% (95% CI, 58.7–77.9%), respectively, but only 45.4% (95% CI, 6.2–68.2%) for ages 80 and over. Conclusions Standard-dose inactivated influenza vaccine has shown good protection in the elderly in China. However, protection may not be satisfactory in people aged 80 years and older.

IntroductionSepsis is a syndrome of organ dysfunction caused by a dysregulated host response to infection and septic shock. Currently, antibiotic therapy is the standard treatment for sepsis, but it can lead to drug resistance. The disturbance of the gut microbiota which is affected by sepsis could lead to the development of organ failure. It is reported that probiotics could shape the gut microbiota, potentially controlling a variety of intestinal diseases and promoting whole-body health.MethodsIn this study, we evaluated the preventive effects of intra- and extracellular products of probiotics on sepsis. The extracellular products of Lactococcus lactis (L. lactis) were identified through the in vivo cell experiments. The preventive effect and mechanism of L. lactis extracellular products on mouse sepsis were further explored through HE staining, mouse survival rate measurement, chip analysis, etc.ResultsL. lactis extracellular products increase cell survival and significantly reduce inflammatory factors secreted in a cellular sepsis model. In in vivo experiments in mice, our samples attenuated sepsis-induced pulmonary edema and inflammatory infiltrates in the lungs of mice, and reduced mortality and inflammatory factor levels within the serum of mice. Finally, the mechanism of sepsis prevention by lactic acid bacteria is suggested. Extracellular products of L. lactis could effectively prevent sepsis episodes.DiscussionIn animal experiments, we reported that extracellular products of L. lactis can effectively prevent sepsis, and preliminarily discussed the pathological mechanism, which provides more ideas for the prevention of sepsis. In the future, probiotics may be considered a new way to prevent sepsis.

Abstract The shortage and unevenness of fossil energy sources are affecting the development and progress of human civilization. The technology of efficiently converting material resources into energy for utilization and storage is attracting the attention of researchers. Environmentally friendly biomass materials are a treasure to drive the development of new‐generation energy sources. Electrochemical theory is used to efficiently convert the chemical energy of chemical substances into electrical energy. In recent years, significant progress has been made in the development of green and economical electrocatalysts for oxygen reduction reaction (ORR). Although many reviews have been reported around the application of biomass‐derived catalytically active carbon (CAC) catalysts in ORR, these reviews have only selected a single/partial topic (including synthesis and preparation of catalysts from different sources, structural optimization, or performance enhancement methods based on CAC catalysts, and application of biomass‐derived CACs) for discussion. There is no review that systematically addresses the latest progress in the synthesis, performance enhancement, and applications related to biomass‐derived CAC‐based oxygen reduction electrocatalysts synchronously. This review fills the gap by providing a timely and comprehensive review and summary from the following sections: the exposition of the basic catalytic principles of ORR, the summary of the chemical composition and structural properties of various types of biomass, the analysis of traditional and the latest popular biomass‐derived CAC synthesis methods and optimization strategies, and the summary of the practical applications of biomass‐derived CAC‐based oxidative reduction electrocatalysts. This review provides a comprehensive summary of the latest advances to provide research directions and design ideas for the development of catalyst synthesis/optimization and contributes to the industrialization of biomass‐derived CAC electrocatalysis and electric energy storage.

With the continuous development of the automobile industry, fast and efficient body styling methods have become crucial. Although traditional hand-drawn sketches and 3D modeling are feasible, they often consume lots of time, manpower and financial resources when faced with complex design requirements. Therefore, a quick method for car body modeling has become a hot topic in automotive design. This paper proposes a three-dimensional automotive wireframe model generation and surface reconstruction method based on a single image in any view. Firstly, 3D wireframe model generation for a single car image in any view. By the MobileNet V2 network trained based on the established 2D car body library USMV3085, the visual angle of a specific single car image in any view can be identified, following the relevant wireframe model can be generated with the weight coefficients computed by constrained least squares method according to the key points and the corresponding rotated key points of the 3D wireframe library. Secondly, the corresponding 3D surface is reconstructed automatically. With the skeleton line firstly computed by the Skeleton Generation Algorithm for every 2D projected split part of the 3D wireframe model, corresponding 3D boundary relation pairs and control polygons are obtained, following the 3D surface is reconstructed integrating all split parts. Compared to traditional computer-aided shape design, this automatic method greatly shortens the research and development cycle and has certain reference significance in car body design.

Summary: Hydrogen generation from boron hydride is important for the development of hydrogen economy. Cobalt (Co) element has been widely used in the hydrolysis of boron hydride. Pyrolysis is a common method for materials synthesis in catalytic fields. Herein, Co-based nanocomposites derived from the pyrolysis of organic metal precursors and used for hydrolysis of boron hydride are summarized and discussed. The different precursors consisting of MOF, supported, metal, and metal phosphide precursors are summarized. The catalytic mechanism consisting of dissociation mechanism based on oxidative addition-reduction elimination, pre-activation mechanism, SN2 mechanism, four-membered ring mechanism, and acid-base mechanism is intensively discussed. Finally, conclusions and outlooks are conveyed from the design of high-efficiency catalysts, the characterization of catalyst structure, the enhancement of catalytic activities, the investigation of the catalytic mechanism, and the catalytic stability of active structure. This review can provide guidance for designing high-efficiency catalysts and boosting development of hydrogen economy.

Summary: Zeolite-encaged metal nanoparticles (NPs) catalysts are emerging as a new frontier owing to their superior ability to stabilize the structure and catalytic performance in the thermal and environmental catalytic reaction. However, the pore size below 2 nm of the conventional zeolites usually limits the accessibility of metal active sites. Herein, Co-Cu NPs of about 2.5–3.5 nm were uniformly encapsulated in the intracrystalline mesoporous Silicalite-1 (S-1) through alkali-treatment ligand-assisted strategy. The obtained sample (termed CoxCu1-x@HS-1) exhibited efficient activity and stability in the ammonia borane hydrolysis with the highest TOF value of 21.46 molH2·molMe−1·min−1. UV–vis DRS spectra indicated that intracrystalline mesopores have greatly improved the openness and accessibility of the active sites, thus improving their catalytic performance. The introduction of Cu regulates the electronic properties of Co, further increasing hydrogen production activity. This research creates new prospects to design other high-performance hierarchical porous zeolite-confined metal/metal oxide catalysts.

Abstract The development of high‐performance organic blue light‐emitting emitters is in urgent to act as an excitation source to contribute the white light generation. On the other hand, the investigation on optical waveguides have been received increasing attentions because they can manipulate the light propagation accurately in the microscale to boost the optoelectronic and energy conversion applications. In this work, we facilely prepared a deep‐blue aggregation‐induced emission (AIE) dye, namely TPP‐4OMe, which shows high luminescent efficiency, narrow emission band and good stability in the aggregate state. TPP‐4OMe can be fabricated as deep‐blue AIE microfibers readily with definite morphology and composition. Based on the AIE microfibers, the active waveguide to transmit deep‐blue emission signals can be achieved with a very low optical loss coefficient (α) of 6.7 × 10−3 dB μm−1. Meanwhile, the full‐visible broadband low‐loss passive waveguide can be well performed with these AIE microfibers, which has never been observed in the pure organic crystals. More interestingly, the excellent properties of AIE microfibers enable them to act as a wave‐guiding excitation source, resulting in a distinct and pure white light emission. The present work not only provides excellent blue light‐emitting materials but also bridges the waveguide to realize the efficient white light emission to accelerate the practical applications.

Summary: Titanium silicate zeolite (TS-1) is widely used in the research on selective oxidations of organic substrates by H2O2. Compared with the chlorohydrin process and the hydroperoxidation process, the TS-1 catalyzed hydroperoxide epoxidation of propylene oxide (HPPO) has advantages in terms of by-products and environmental friendliness. This article reviews the latest progress in propylene epoxidation catalyzed by TS-1, including the HPPO process and gas phase epoxidation. The preparation and modification of TS-1 for green and sustainable production are summarized, including the use of low-cost feedstocks, the development of synthetic routes, strategies to enhance mass transfer in TS-1 crystal and the enhancement of catalytic performance after modification. In particular, this article summarizes the catalytic mechanisms and advanced characterization techniques for propylene epoxidation in recent years. Finally, the present situation, development prospect and challenge of propylene epoxidation catalyzed by TS-1 were prospected.

Abstract Expanding the application scenarios of wood-derived biochar guided by the conversion of traditional energy to new energy shows great promise as a field. As thrilling energy conversion apparatus, zinc-air batteries (ZABs) require cathode catalysts with high oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities and stability. Herein, two-dimensional nickel-iron hydroxide nanosheets were creatively assembled in N-doped wood-derived biochar (NiFe-LDH@NC) by an in-situ growth method. The categorized porous organization in wood-derived biochar facilitates the rapid seepage of electrolytes and rapid diffusion of reaction gases. The unique interfacial structure of biochar and NiFe-LDH accelerates electron transfer during oxygen electrocatalysis, and endows NiFe-LDH@NC with first-class catalytic activity and durability for ORR and OER. The ZAB derived from NiFe-LDH@NC showed elevated discharge productivity and cycle endurance, making it promising for viable applications. This work provided a convenient way for the conversion of wood-derived biochar to high-value added electrocatalysts. Graphical Abstract

Box beams constructed earlier were prone to inadequate bending capacity owing to low construction standards, overloading, and environmental degradation. To resolve the challenge, three full-scale box slab beams in service for 15 years were strengthened with a high-strength mortar layer and an ultra-high-performance concrete (UHPC) layer in this paper. The flexural performances of unstrengthened beams (control beam) and strengthened beams (mortar beam, UHPC beam) were investigated by in situ four-point bending tests and numerical simulations. The experimental results showed that the cracking of box beams, strengthened with high-strength mortar and UHPC layers, was effectively mitigated. In comparison to the control beam, the cracking load of the mortar beam and the UHPC beam increased by 20%, and the ultimate load increased by 23.5% and 35.3%, respectively. The high-strength mortar layer had little influence on the elastic-phase stiffness of box beams. In contrast, the stiffness of the elastic phase of the box beam, strengthened by the UHPC layer, increased by 32.9%. In the numerical simulations, the load-deflection curves obtained from finite elements and tests coincided well. The characteristic loads showed relatively good agreement with the test results, with errors below 10%. Combined with the tests and numerical analyses, the proposed equations for predicting the ultimate bearing capacities of the control beam, mortar beam, and UHPC beam were presented with a better prediction accuracy.

As one of the most innovative cement-based materials, ultra-high performance concrete (UHPC), with excellent durability and mechanical properties, has been widely used in strengthening existing bridges. In this study, in-situ four-point bending tests were carried out to investigate the flexural behavior of precast reinforced concrete (RC) hollow slab beams in service for 15 years strengthened with UHPC. Among them, three hollow slab beams were strengthened with UHPC, and the interface treatment was chiseling, planting rebars, and a combination of chiseling and planting rebars, respectively. The remaining one without any strengthening treatment was used as the control specimen. To evaluate the enhancement effect of different interface treatments on UHPC-strengthened beams, the cracking load, ultimate load, crack development and failure modes of UHPC-strengthened beams were analyzed. Results indicated that the stiffness, deflection capacity and flexural capacity of UHPC-strengthened beams was significantly improved. Meanwhile, the stiffness of UHPC-strengthened beams in the pre-damage stage was increased by 49%–94%, when compared with the unstrengthened beam. Correspondingly, the ultimate flexural capacity was increased by 29%–38%. The interface chiseling treatment was more favorable to enhance the deformation capacity of UHPC-strengthened beams. The interface planting rebar treatment was more favorable to enhancing the ductility of UHPC-strengthened beams. The crack development was effectively suppressed by the interface chiseling and planting rebars together. This contributes to a higher load capacity reserve for UHPC-strengthened beams. The bearing capacity under serviceability limit state of the UHPC-strengthened beams was increased by 1.25, 2, and 2.5 times through the interface treatments of chiseling, planting rebars, and a combination of both, respectively.

A large number of early hollow slab beams suffer from inadequate load carrying capacity, stiffness and durability, resulting from the overloading, environmental deterioration mechanism and poor maintenance. Most of the existing studies on the reinforcement of pre-damaged reinforced concrete beam carried out in scale-down models. However, the artificial pre-damage (mechanical damage and accelerated corrosion) alters the deterioration mechanism of reinforced concrete beam. The scale effect leads to disparities in force ratios acting on scale-down models and full-scale structures. To solve these problems, three 15-year-old full-scale hollow slab beams (taken from a serving bridge in Guangxi, China, with 15.96 m long) were respectively strengthened with steel-reinforced UHPC layer, GFRP-reinforced UHPC layer and CFRP layer. The flexural behaviors of the strengthened beams and the control beam were investigated by field four-point bending test and numerical simulation. The experimental results indicate that the ultimate flexural load capacity and stiffness of hollow slab beams after strengthened are respectively increased by 17.6%− 47.1% and 4.7%− 17.9%, and the deflection under service load is decreased by 7.6%− 19.1%. Meanwhile, UHPC is beneficial to improve the energy absorption capacity of hollow slab beams. Moreover, the main bearer of load is the tensile steel bars in the hollow slab beams and the reinforcement layers played an auxiliary role in load bearing. Finally, the accurate prediction formulas for the ultimate flexural load of strengthened hollow slab beams with a maximum error of only 3.5% were proposed.

Interface dipole modulated hot-electron ejection enables an on-chip electric readout plasmonic hydrogen sensor with abnormal S-shape I–V and advanced sensing performance at a limit of detection of 1 ppm.

Abstract With high reconfigurability and swarming intelligence, programmable medical micromachines (PMMs) represent a revolution in microrobots for executing complex coordinated tasks, especially for dynamic routing of various targets along their respective routes. However, it is difficult to achieve a biocompatible implantation into the body due to their exogenous building blocks. Herein, a living microrouter based on an organic integration of endogenous red blood cells (RBCs), programmable scanning optical tweezers and flexible optofluidic strategy is reported. By harvesting energy from a designed optical force landscape, five RBCs are optically rotated in a controlled velocity and direction, under which, a specific actuation flow is achieved to exert the well‐defined hydrodynamic forces on various biological targets, thus enabling a selective routing by integrating three successive functions, i.e., dynamic input, inner processing, and controlled output. Benefited from the optofluidic manipulation, various blood cells, such as the platelets and white blood cells, are transported toward the damaged vessel and cell debris for the dynamic hemostasis and targeted clearance, respectively. Moreover, the microrouter enables a precise transport of nanodrugs for active and targeted delivery in a large quantity. The proposed RBC microrouter might provide a biocompatible medical platform for cell separation, drug delivery, and immunotherapy.

PurposeThe purpose of this study is to utilize a two-material decomposition to quantify bone marrow edema on a dual-energy computed tomography (DECT) scanner at the cervical, thoracic, and lumbar spine acute fractures in correlation with short tau inversion recovery (STIR) hyperintensity on magnetic resonance imaging (MRI) in comparison with the normal bone marrow.Materials and methodsThis retrospective institutional review board–approved study gathered patients over 18 years old who had acute cervical, thoracic, or lumbar spinal fractures scanned on a DECT scanner. Those who had a spinal MRI done with bone marrow STIR hyperintensity within 3 weeks of the DECT were included. The water (calcium) and fat (calcium) density (mg/cm3) measurements of the region of interest of the bone marrow were obtained at a normal anatomic equivalent site and at the fracture site where STIR hyperintensity was noted on MRI. A statistical analysis was performed using the paired t-test and Wilcoxon signed rank test (p > 0.05).ResultsA total of 20 patients met the inclusion criteria (males n = 17 males, females n = 3). A total of 32 fractures were analyzed: 19 cervical and 13 thoracolumbar. There were statistically significant differences in the water (43 ± 24 mg/cm3) and fat (36 ± 31 mg/cm3) density (mg/cm3) at the acute thoracic and lumbar spine fractures in correlation with edema on STIR images (both paired t-test

Car body design includes the construction of car sketches, 2D models and 3D models. The establishment of high-quality car body models usually relies on CAD software, which requires the proficient operating skills, and the efficiency is relatively low compared with automatic modeling. The time cost of communication between the designer and the model engineer will also affect the modeling efficiency. How to quickly and automatically generate high quality parametric models from car sketches or images efficiently has become a development direction for the automotive design. In this paper, we propose a template-based reconstruction method of 2D high-precision car body model. On the basis of the established 2D model database, a coarse model is achieved by the improved Orthogonal Matching Pursuit algorithm with few key points which are obtained by deep neural network; further, according to the proposed auto-fitting optimization algorithm of cubic Bezier curve, the modeling process of “from coarse to fine” is realized combining edge information. The proposed template-based 2D high-precision model reconstruction algorithm of the car body can greatly reduce the modeling time under the given modeling accuracy.

The realization of Jones matrix with full eight free parameters is particularly challenging. Here, the authors construct spatially varying Jones matrix with eight free parameters by cascading two-layer metasurfaces and use it for new optical functionalities.

A nonmetallic plasmonic heterostructure of W18O49 nanowires on reduced-graphene oxide is reported for the efficient dehydration of isopropanol to 100% propylene. The energy barrier is found to be reduced under full-spectrum irradiation.

Abstract Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large‐scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal‐organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h‐BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by‐products and the design of possible hydrogen product‐regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Abstract Contamination of nano‐biothreats, such as viruses, mycoplasmas, and pathogenic bacteria, is widespread in cell cultures and greatly threatens many cell‐based bio‐analysis and biomanufacturing. However, non‐invasive trapping and removal of such biothreats during cell culturing, particularly many precious cells, is of great challenge. Here, inspired by the wake‐riding effect, a biocompatible opto‐hydrodynamic diatombot (OHD) based on optical trapping navigated rotational diatom (Phaeodactylum tricornutum Bohlin) for non‐invasive trapping and removal of nano‐biothreats is reported. Combining the opto‐hydrodynamic effect and optical trapping, this rotational OHD enables the trapping of bio‐targets down to sub‐100 nm. Different nano‐biothreats, such as adenoviruses, pathogenic bacteria, and mycoplasmas, are first demonstrated to be effectively trapped and removed by the OHD, without affecting culturing cells including precious cells such as hippocampal neurons. The removal efficiency is greatly enhanced via reconfigurable OHD array construction. Importantly, these OHDs show remarkable antibacterial capability, and further facilitate targeted gene delivery. This OHD serves as a smart micro‐robotic platform for effective trapping and active removal of nano‐biothreats in bio‐microenvironments, and especially for cell culturing of many precious cells, with great promises for benefiting cell‐based bio‐analysis and biomanufacturing.

Sheep have historically been bred globally as a vital food source. To explore the transcriptome of adipose tissue and investigate key genes regulating adipose metabolism in sheep, adipose tissue samples were obtained from F1 Dorper × Hu sheep. High-throughput sequencing libraries for second- and third-generation sequencing were constructed using extracted total RNA. Functional annotation of differentially expressed genes and isoforms facilitated the identification of key regulatory genes and isoforms associated with sheep fat metabolism. SMRT-seq generated 919,259 high-accuracy cDNA sequences after filtering. Full-length sequences were corrected using RNA-seq sequences, and 699,680 high-quality full-length non-chimeric (FLNC) reads were obtained. Upon evaluating the ratio of total lengths based on FLNC sequencing, it was determined that 36,909 out of 56,316 multiple-exon isoforms met the criteria for full-length status. This indicates the identification of 330,375 full-length FLNC transcripts among the 370,114 multiple-exon FLNC transcripts. By comparing the reference genomes, 60,276 loci and 111,302 isoforms were identified. In addition, 43,423 new genes and 44,563 new isoforms were identified. The results identified 185 (3198), 394 (3592), and 83 (3286) differentially expressed genes (transcripts) between tail and subcutaneous, tail and visceral, and subcutaneous and visceral adipose tissues, respectively. Functional annotation and pathway analysis revealed the following observations. (1) Among the differentially expressed genes (DEGs) of TF and SF tissues, the downregulation of ACADL, ACSL6, and NC_056060.1.2536 was observed in SF, while FFAR4 exhibited upregulation. (2) Among the DEGs of TF and VF tissues, expressions of ACADL, ACSL6, COL1A1, COL1A2, and SCD were downregulated in VF, with upregulation of FFAR4. (3) Among SF and VF expressions of COL1A1, COL1A2, and NC_056060.1.2536 were downregulated in VF. Specific differentially expressed genes (ACADL, ACSL6, COL1A1, COL1A2, FFAR4, NC_056060.1.2536, and SCD) and transcripts (NC_056066.1.1866.16 and NC_056066.1.1866.22) were identified as relevant to fat metabolism. These results provide a dataset for further verification of the regulatory pathway associated with fat metabolism in sheep.

Over the past few decades, the design and development of advanced materials based on two-dimensional (2D) ultra-thin materials for efficient energy catalysis and storage have aroused much attention. 2D ultra-thin materials have emerged as the most promising candidates for energy catalysis and storage because of their unique physical, chemical, and electronic properties. Herein, we review the research and application of 2D ultra-thin material-based catalysts for heterogeneous catalysis. The various catalysts based on 2D ultra-thin materials, such as MXenes, GO, black phosphorus, and h-BN, are discussed in detail for catalytic processes in the fields of electrocatalysis, photocatalysis, and energy catalysis. The fundamental relationships between the electronic structure and catalytic activity of 2D ultra-thin materials were described at the atomic level. A significant emphasis on the development of 2D ultra-thin materials and their intrinsic activity and stability was presented. Finally, the prediction and prospection of the future development of 2D ultra-thin materials as efficient nanomaterials are also conveyed. It is important to thoroughly understand and summarize such 2D ultra-thin materials to provide further guidance for structural optimization and performance improvement.

Abstract Rapid and accurate detection of microorganisms is critical to clinical diagnosis. As Raman spectroscopy promises label‐free and culture‐free detection of biomedical objects, it holds the potential to rapidly identify microorganisms in a single step. To stabilize the microorganism for spectrum collection and to increase the accuracy of real‐time identification, we propose an optofluidic method for single microorganism detection in microfluidics using optical‐tweezing‐based Raman spectroscopy with artificial neural network. A fiber optical tweezer was incorporated into a microfluidic channel to generate optical forces that trap different species of microorganisms at the tip of the tweezer and their Raman spectra were simultaneously collected. An artificial neural network was designed and employed to classify the Raman spectra of the microorganisms, and the identification accuracy reached 94.93%. This study provides a promising strategy for rapid and accurate diagnosis of microbial infection on a lab‐on‐a‐chip platform.

Abstract Background Papillary thyroid carcinoma (PTC) is the most common histological type of thyroid malignancy that tends to metastasize to cervical lymph nodes. In the present study, we aimed to investigate which clinicopathologic and ultrasound features of PTC are associated with clinical lymph node metastasis (LNM) and numbers of pathological LNM. Methods From January 2016 to December 2018, we identified a cohort of patients with PTC who underwent cervical ultrasonography and were diagnosed through operation and pathology. Clinical N1(cN1) and > 5 pathologic N1(pN1) were considered in the postoperative stratification to have an intermediate risk according to the 2015 ATA guidelines. Clinicopathological and ultrasound features in PTC patients were performed in accordance with the independent risk factors of cN1 and > 5pN1 respectively by using the univariate and multivariate analyses. Results We collected 748 PTC patients in the final inclusion criteria. There were 688 cN0 cases and 60 cN1 cases. From the analyses, primary tumor size > 2 cm, capsule contact, extrathyroidal extensions (ETE) and central LNM remained independent risk factors for cN1 in PTC patients. In the 748 PTC patients, 707 cases had ≤ 5 pN1, and 41 cases had > 5 pN1. Multifocality, primary tumor size > 2 cm, capsule contact and ETE are significant independent risk factors for > 5 pN1. Conclusions We concluded that multifocality, primary tumor size > 2 cm, capsule contact, ETE and central LNM were independent risk factors for the intermediate risk stratification in patients with PTC. Ultrasonography is a good technique for the preoperative lymph node staging of PTC and is helpful for detecting LNM.

Carbon nanotubes (CNTs) have exhibited immense potential for applications in biology and medicine, and once their intended purpose is fulfilled, the elimination of residual CNTs is essential to avoid negative effects. In this study, we demonstrated the effective collection and simple removal of CNTs dispersed in a suspension via thermal convection. First, a tapered fiber tip with a cone angle and end diameter of 10° and 3 μm, respectively, was fabricated via a heating and pulling method. Further, a laser beam with a power and wavelength of 100 mW and 1.55 μm, respectively, was launched into the tapered fiber tip, which was placed in a CNT suspension, resulting in the formation of a microbubble on the fiber tip. The temperature gradient on the microbubble and suspension surface induced thermal convection in the suspension, which resulted in the accumulation of CNTs on the fiber tip. The experimentally formed CNT cluster possessed a circular top surface with a diameter of 87 μm and an arched cross-section with a height of 19 μm. Furthermore, this CNT cluster was firmly attached to the fiber tip. Therefore, the removal of CNT clusters can be realized by simply removing the fiber tip from the suspension. Moreover, we simulated the thermal convection that caused CNT aggregation. The obtained results indicate that convection near the fiber tip flows toward it, which pushes the CNTs toward the fiber tip and enables their attachment to it. Further, the flow velocity is symmetrically distributed as a Gaussian function, which results in the formation of a circular top surface and arched cross-sectional profile for the CNT cluster. Our method may be applied in biomedicine for the collection and removal of nano-drug residues.

Abstract Background Colorectal cancer (CRC) represents a common malignancy in gastrointestinal tract. Iodine-125 (125I) seed implantation is an emerging treatment technology for unresectable tumors. This study investigated the mechanism of 125I seed in the function of CRC cells. Methods The CRC cells were irradiated with different doses of 125I seed (0.4, 0.6 and 0.8 mCi). miR-615 expression in CRC tissues and adjacent tissues was detected by RT-qPCR. miR-615 expression was intervened with miR-615 mimic or miR-615 inhibitor, and then the CRC cells were treated with 5-AZA (methylation inhibitor). The CRC cell growth, invasion and apoptosis were measured. The methylation level of miR-615 promoter region was detected. The xenograft tumor model irradiated by 125I seed was established in nude mice. The methylation of miR-615, Ki67 expression and CRC cell apoptosis were detected. Results 125I seed irradiation repressed the growth and facilitated apoptosis of CRC cells in a dose-dependent manner. Compared with adjacent tissues, miR-615 expression in CRC tissues was downregulated and miR-615 was poorly expressed in CRC cells. Overexpression of miR-615 suppressed the growth of CRC cells. 125I seed-irradiated CRC cells showed increased miR-615 expression, reduced growth rate and enhanced apoptosis. The methylation level of miR-615 promoter region in CRC cells was decreased after 125I seed treatment. In vivo experiments confirmed that 125I seed-irradiated xenograft tumors showed reduced methylation of the miR-615 promoter and increased miR-615 expression, as well as decreased Ki67 expression and enhanced apoptosis. The target genes of miR-615 and its regulatory downstream pathway were further predicted by bioinformatics analysis. Conclusions 125I seed repressed the growth and facilitated the apoptosis of CRC cells by suppressing the methylation of the miR-615 promoter and thus activating miR-615 expression. The possible mechanism was that miR-615-5p targeted MAPK13, thus affecting the MAPK pathway and the progression of CRC.

Early detection of tumors has great significance for formative detection and determination of treatment plans. However, cancer detection remains a challenging task due to the interference of diseased tissue, the diversity of mass scales, and the ambiguity of tumor boundaries. It is difficult to extract the features of small-sized tumors and tumor boundaries, so semantic information of high-level feature maps is needed to enrich the regional features and local attention features of tumors. To solve the problems of small tumor objects and lack of contextual features, this paper proposes a novel Semantic Pyramid Network with a Transformer Self-attention, named SPN-TS, for tumor detection. Specifically, the paper first designs a new Feature Pyramid Network in the feature extraction stage. It changes the traditional cross-layer connection scheme and focuses on enriching the features of small-sized tumor regions. Then, we introduce the transformer attention mechanism into the framework to learn the local feature of tumor boundaries. Extensive experimental evaluations were performed on the publicly available CBIS-DDSM dataset, which is a Curated Breast Imaging Subset of the Digital Database for Screening Mammography. The proposed method achieved better performance in these models, achieving 93.26% sensitivity, 95.26% specificity, 96.78% accuracy, and 87.27% Matthews Correlation Coefficient (MCC) value, respectively. The method can achieve the best detection performance by effectively solving the difficulties of small objects and boundaries ambiguity. The algorithm can further promote the detection of other diseases in the future, and also provide algorithmic references for the general object detection field.

Abstract Using a single biological element as a photonic component with well-defined features has become a new intriguing paradigm in biophotonics. Here we show that endogenous lipid droplets in the mature adipose cells can behave as fully biocompatible microlenses to strengthen the ability of microscopic imaging as well as detecting intra- and extracellular signals. By the assistance of biolenses made of the lipid droplets, enhanced fluorescence imaging of cytoskeleton, lysosomes, and adenoviruses has been achieved. At the same time, we demonstrated that the required excitation power can be reduced by up to 73%. The lipidic microlenses are finely manipulated by optical tweezers in order to address targets and perform their real-time imaging inside the cells. An efficient detecting of fluorescence signal of cancer cells in extracellular fluid was accomplished due to the focusing effect of incident light by the lipid droplets. The lipid droplets acting as endogenous intracellular microlenses open the intriguing route for a multifunctional biocompatible optics tool for biosensing, endoscopic imaging, and single-cell diagnosis.

Using ultra-high performance concrete (UHPC) as the pavement layer on the orthotropic steel deck (OSD) can greatly enhance the rigidity to solve the fatigue cracking of the steel deck and the resulting damage to the pavement layer. However, the thin UHPC layer limits the extensive use of the short stud connector. In this study, three types of interfaces were designed by introducing different additives into the epoxy matrix, and the shear properties of each interface and short stud connector were compared. Then, the influence of short stud connectors and optimized interface on the composite bridge deck’s bending property was analyzed through the composite bridge deck’s bending test. Moreover, the mechanical behavior of the interface in the composite bridge deck is discussed based on the finite element model. The results show that the ultimate load of the composite bridge deck with the optimized interface is reduced by 21.5% compared with that of the composite bridge deck with the short stud connector. However, the composite bridge deck with the optimized interface has higher bending stiffness before failure and is less affected by cyclic loading. Moreover, the composite bridge deck with the optimized interface is unsuitable for cyclic loading conditions when the defect area reaches 30%. Finally, the numerical simulation of the composite bridge deck with the optimized interface is successfully realized based on the cohesive zone model, and the applicability of the interface in the composite bridge deck is verified.

The emerging biological entities-based biophotonic probes, such as biological lasers, biophotonic waveguides, and bio-microlenses, have opened up an entirely new window for bio-detection and imaging with high biocompatibility.

BackgroundUlcerative colitis (UC) is an inflammatory lesion of the colon from various causes. As current therapeutic drugs have adverse effects on patients with UC, there is a growing demand for alternative medicines from natural and functional foods. Locust bean gum, as a dietary fiber, has a variety of physiological effects.MethodsIn the present study, locust bean gum hydrolysate (LBGH) was obtained from the acid hydrolysis of locust bean gum. The structure of LBGH was characterized by thin-layer chromatography and high performance liquid chromatography (HPLC)-electrospray ionization (ESI)-mass spectrometry (MS)/MS analysis. And we investigated the therapeutic effect of LBGH on a mouse model of dextran sulfate sodium (DSS)-induced colitis.ResultsIt was observed that the LBGH consisted of a mixture of monosaccharides and oligosaccharides with a degree of polymerization (DP) 2–7. LBGH treatment dramatically alleviated colonic pathological damage, suppressed the overproduction of pro-inflammatory factors and the activation of nuclear factor κB (NF-κB), increased the mRNA expression of tight junction proteins, and increased the abundance of probiotics such as Lactobacillus and Bifidobacterium in the gut.ConclusionThere is a correlation between these mitigating effects on inflammation and the treatment of LBGH. Therefore, LBGH has tremendous potential in the treatment of colitis.

Ammonia borane (AB) can be catalytically hydrolyzed to provide hydrogen at room temperature due to its high potentaial for hydrogen storage. Non-precious metal heterogeneous catalysts have broad application in the field of energy catalysis. In this article, catalysts precursor is obtained from Co-Ti-resorcinol-formaldehyde resin by sol–gel method. Co/TiO2@N-C (CTC) catalyst is prepared by calcining the precursor under high temperature conditions in nitrogen atmosphere. Co-CoOx/TiO2@N-C (COTC) is generated by the controllable oxidation reaction of CTC. The catalyst can effectively promote the release of hydrogen during the hydrolytic dehydrogenation of AB. High hydrogen generation at a specific rate of 5905 mL min−1 gCo−1 is achieved at room temperature. The catalyst retains its 85% initial catalytic activity even for its fifth time use in AB hydrolysis. The synergistic effect among Co, Co3O4 and TiO2 promotes the rate limiting step with dissociation and activation of water molecules by reducing its activation energy. The applied method in this study promotes the development of non-precious metals in catalysis for utilization in clean energy sources.

Aiming at the problems of high energy consumption and particle breakage in the pneumatic conveying process of large-scale breeding enterprises, in this paper, based on the theoretical calculated value of particle suspension velocity, a computational fluid model and a discrete element model are established based on computational fluid dynamics (CFD) and discrete element method (DEM). Then, through the numerical simulation of gas-solid two-phase flow, the influence of four factors of conveying wind speed, particle mass flow rate, pipe diameter, and particle size on the velocity distribution of particles in a horizontal pipe, dynamic pressure change in the pipe, pressure drop in the pipe, and solid mass concentration are studied. The results show that the k-ε turbulence model can better simulate the movement of gas-solid two-phase flow, and through the analysis of the simulation, the influence of four different factors on the conveying characteristics is obtained, which provides a scientific basis for the construction of the conveying line.

In recent years, numerous studies have explored the benefits of utilizing prestressed carbon fiber-reinforced polymer (CFRP) for strengthening concrete structures. However, research on the reinforcement of prestressed CFRP on full-scale hollow RC box girders, particularly damaged bridges, remains limited. In this study, both experiments and finite element analysis (FEA) were performed to investigate the flexural behavior of full-scale hollow RC box girders with varying degrees of damage, which were strengthened using CFRP with different levels of prestress. The adhesive behavior of the CFRP–concrete interface was considered in the FEA. Numerical simulations were conducted to assess the flexural behaviors of the girders, including failure modes, yield and ultimate loads, and deflections. The results revealed that the application of prestressed CFRP efficiently increased the yield and ultimate loads of the box girders. Specifically, when the degree of damage of the hollow box girder was less than 23%, the flexural bearing capacity of the repaired girder could be recovered after being strengthened with two prestressed CFRP strips measuring 50 mm in width and 3 mm in thickness. However, the risk of premature debonding at the CFRP–concrete interface increased when the prestressing level of CFRP and degree of damage of hollow RC box girders exceeded 35% and 40%, respectively. These findings suggest that the use of prestressed CFRP may be a promising method for repairing damaged hollow RC box girders, but careful consideration of the degree of damage and prestressing level would be necessary to ensure the effectiveness and safety of the repair.

Clubroot is caused by Plasmodiophora brassicae, which threatens Brassicaceae crop production worldwide. In recent years, there has been an outbreak and rapid spread of clubroot in many major cruciferous crop-producing areas of China. In this study, we identified a cabbage material DingWen (DW) with different resistant capabilities from Huashuang5R (H5R) and Huayouza62R of Brassica napus, which are currently used as the main resistant cultivars for clubroot management in China. We used a next-generation sequencing-based bulked segregant analysis approach, combined with genetic mapping to identify clubroot-resistant (CR) genes from F1 population generated from a cross between the DW (CR) and HZSX (clubroot susceptible). The CR locus of DW (named CRA8.1) was mapped to a region between markers A08-4346 and A08-4853, which contains two different loci CRA8.1a and CRA8.1b after fine mapping. The CRA8.1b loci contain a fragment of 395 kb between markers A08-4624 and A08-4853 on A08 chromosome, and it is responsible for the resistance to PbZj and PbXm isolates. However, together with CRA8.1a, corresponding to a 765-kb region between markers A08-4346 and A08-4624, then it can confer resistance to PbXm+. Finally, through expression analysis between resistant and susceptible materials, two genes encoding TIR-NBS-LRR proteins (BraA08g039211E and BraA08g039212E) and one gene encoding an RLP protein (BraA08g039193E) were identified to be the most likely CR candidates for the peculiar resistance in DW.

Abstract Optogenetics has become a widely used technique in neuroscience research, capable of controlling neuronal activity with high spatiotemporal precision and cell‐type specificity. Expressing exogenous opsins in the selected cells can induce neuronal activation upon light irradiation, and the activation depends on the power of incident light. However, high optical power can also lead to off‐target neuronal activation or even cell damage. Limiting the incident power, but enhancing power distribution to the targeted neurons, can improve optogenetic efficiency and reduce off‐target effects. Here, the use of optical lenses made of polystyrene microspheres is demonstrated to achieve effective focusing of the incident light of relatively low power to neighboring neurons via photonic jets. The presence of microspheres significantly localizes and enhances the power density to the target neurons both in vitro and ex vivo, resulting in increased inward current and evoked action potentials. In vivo results show optogenetic stimulation with microspheres that can evoke significantly more motor behavior and neuronal activation at lowered power density. In all, a proof‐of‐concept of a strategy is demonstrated to increase the efficacy of optogenetic neuromodulation using pulses of reduced optical power.

Because of the increased incidence and prevalence, ulcerative colitis (UC) has become a global health issue in the world. Current therapies for UC are not totally effective which result in persistent and recurrent symptom of many patients. Lactobacillus with anti-inflammatory effects might be beneficial to the prevention or treatment for UC. Here, we examined the ameliorative effects of the metabolites of Lactobacillus fermentum F-B9-1 (MLF) in Caco-2 cells and dextran sodium sulfate (DSS)-induced UC model mice. MLF displayed intestinal barrier-protective activities in Caco-2 cells by increasing the expression of Occludin and ZO-1. They also showed anti-inflammatory potential in interleukin (IL)-1β and IL-6. In order to further examine the in vivo anti-inflammatory effect of MLF, the MLF was gavaged in the DSS-induced UC model mice. The intragastric administration of MLF effectively alleviated colitis symptoms of weight loss, diarrhea, colon shortening, and histopathological scores, protected intestinal barrier function by increasing Occludin and ZO-1, and attenuated colonic and systemic inflammation by suppressing production of IL-1β and IL-6. Finally, the use of MLF remodeled the diversity of the gut microbiota and increased the number of beneficial microorganisms. Overall, the results demonstrated that MLF relieved DSS-induced UC in mice. And MLF might be an effective therapy method to UC in the clinic in the future.

Abstract Intracellular thermometry provides important information about the physiological activity of single cells and has been implemented using diverse temperature‐sensitive materials as nanoprobes. However, measuring the temperature of specific organelles or subcellular structures is challenging because it requires precise positioning of the nanoprobes. Here, it is shown that dispersed fluorescent nanodiamonds (FNDs) endocytosed in living cells can be aggregated into microspheres using optical forces and used as intracellular temperature probes. The aggregation of the FNDs and electromagnetic resonance between individual nanodiamonds in the microspheres lead to a sevenfold intensity enhancement of 546‐nm laser excitation. With the assistance of a scanning optical tweezing system, the FND microspheres can be precisely patterned and positioned within the cells. By measuring the fluorescence spectra of the microspheres, the temperatures at different locations within the cells are detected. The method provides an approach to the constructing and positioning of nanoprobes in an intracellular manner, which has potential applications in high‐precision and flexible single‐cell analysis.

Bolt shear connectors used in prefabricated steel–concrete composite beams can be arranged into a group to enhance the construction efficiency, which will cause the multi-bolt effect and further affect the shear performance of bolt connectors. This paper developed three-dimensional finite element models of push-out specimens to investigate the shear performance of multi-bolt connectors. Numerical results showed that the friction coefficient at the interfaces between the steel girders and precast concrete (PC) slabs and bolt preload dramatically improved the initial stiffness of bolts; when the longitudinal spacing of bolts was reduced from 100 mm to 60 mm, the decrease in the average peak load per bolt was 3.5%, 9.2%, and 11.4% for bolts of 16 mm, 20 mm, and 24 mm diameters. A modified calculation method for the shear resistance of multi-bolt shear connectors was proposed based on the numerical analysis, and a simplified model of shear load versus relative slip was further developed.

Abstract One challenge facing the development of air electrodes for Zn–air batteries (ZABs) is the embedment of active sites into carbon, which requires cracks and blends between powder and membrane and results in low energy efficiency during manufacturing and utilization. Herein, a surface phosphorization‐monolithic strategy is proposed to embed CoO nanoparticles into paulownia carbon plate (P–CoO@PWC) as monolithic electrodes. Benefiting from the retention of natural transport channels, P–CoO@PWC‐2 is conducive to the construction of three‐phase interface structure for efficient mass transfer and high electrical conductivity. The electrode exhibits remarkable catalytic activities for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with a small overpotential gap (EOER − EORR = 0.68 V). Density functional theory calculations reveal that the incorporation of P on P–CoO@PWC‐2 surface adjusts the electronic structure to promote the dissociation of water and the activation of oxygen, thus inducing catalytic activity. The monolithic P–CoO@PWC‐2 electrode for quasi‐solid‐state or aqueous ZABs has excellent specific power, low charge–discharge voltage gap (0.83 V), and long‐term cycling stability (over 700 cycles). This work serves as a new avenue for transforming abundant biomass into high‐value energy‐related engineering products.

Although quantum biological electron transfer is important in many biological processes, imaging of the events in live cells has remained challenging. Here, the authors demonstrate real-time optical detection of quantum biological electron tunnelling between nanoparticles and cytochrome c inside living cells.

Abstract Background Long non-coding RNAs (lncRNAs) are promising therapeutic molecules of cancer. Here we aim to study the therapeutic effect and mechanism of a lncRNA, HOXA11-AS, in oral squamous cell carcinoma (OSCC). Methods OSCC tissues and adjacent matched paraneoplastic normal tissues used in this study were collected from 42 OSCC patients. The significant downregulation or upregulation of HOXA11-AS expression in OSCC cells was confirmed by quantitative real-time PCR (qRT-PCR). Bioinformatics analysis of StarBase were performed to investigate the potential microRNAs mediated by HOXA11-AS. HOXA11-AS-transfected cells or control cells were subcutaneously injected into nude mice to further determine the effects of HOXA11-AS on OSCC progression in vivo. Results qRT-PCR analysis indicated that HOXA11-AS expression was significantly upregulated in OSCC tissues. Functional studies revealed that HOXA11-AS significantly promotes cell proliferation, reduces the percentage of G0/G1 phase cells and enhances the cell invasion in OSCC. Bioinformatics analysis suggested that a microRNA (miRNA), miR-518a-3p, is as a target of HOXA11-AS. Alteration of miR-518a-3p levels by HOXA11-AS transduced to changes in PDK1 expression. In a mouse model of OSCC, HOXA11-AS overexpression promoted tumor growth, concomitant with reduced miR-518a-3p expression and increased PDK1 expression. Conclusion Taken together, our study demonstrates that HOXA11-AS/miR-518a-3p/PDK1 axis is an important regulator of OSCC progression and may serve as a potential therapeutic target in OSCC. HARMU20150128, registered at Jan, 28 2018.

The advantages of using prestressed carbon fiber reinforced polymer (CFRP) for strengthening and retrofitting structures have been reported in recent years. In this regard, most of the studies on prestressed CFRP technique have been carried out in the laboratory test with small-scale and no damage (reinforced concrete) RC beam. However, the real structures that need to be retrofitted in service are often degraded or damaged due to early cracking. This paper aims at studying the effect of prestressed CFRP method on full-scale and damaged RC beams. The damaged levels of four full-scale damaged hollow RC beams taken from an old bridge were evaluated. One damaged beam was tested to check the residual capacity, and the other three were strengthened with prestressed composite strengthened CFRP and steel-carbon fiber reinforced polymer (SCFRP). The flexural behavior of non-strengthened and prestressed strengthened beams was investigated. During the experiments, the failure modes, deflection, yield and ultimate load, strains of concrete, steel reinforcements, and SCFRP were measured and analyzed. The results showed that the stiffness at the elastic stage was increased by 64.9%, 66.9%, and 67.1% after strengthened by SCFRP with 30%, 40%, and 60% prestressing level. Moreover, the ultimate load of damaged hollow RC beams were improved by 19.53%, 21.82%, and 31.9%, respectively. The flexural behavior of the severely damaged RC beam with strength reduction coefficient of 0.65 can be recovered after being strengthened by SCFRP with 40% prestressing levels. Meanwhile, SCFRP-concrete interface debonding failure occurred when the prestressing level exceed 60%, and the characteristics of brittle failure became more evident with increased prestressing level of the SCFRP.