Search

Following the 2nd release of the "Emerging PV reports," the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the "Emerging PV reports" extends the scope toward triple junction solar cells. [ABSTRACT FROM AUTHOR]

Following the 1st release of the "Emerging photovoltaic (PV) reports", the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd instalment of the "Emerging PV reports" extends the scope toward tandem solar cells and presents the current state‐of‐the‐art in tandem solar cell performance for various material combinations. [ABSTRACT FROM AUTHOR]

Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye‐sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi‐junction PVs. Nevertheless, it can be very time consuming to find or develop an up‐to‐date overview of the state‐of‐the‐art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state‐of‐the‐art emerging PVs. [ABSTRACT FROM AUTHOR]

The aim of the study is to determine marketing tactic and strategies based on Erzurum Civil cheese consumption preferences and the purchase patterns of the consumers who reside in Erzurum. The main material of the study was created by the primary data obtained from a survey conducted on 401 households residing in Erzurum during 2015 and consuming Erzurum Civil cheese. Principal Component Analysis (PCA) and Two-step Cluster Analysis were used to determine the main factores impacting on the consumers' purchase decisions, and to segment homogenious clusters according to their purchase frequencies, respectively by considering the data obtained. The results of the study highlighted that the heavy, medium and light users accounting consumption preferences of Erzurum Civil cheese gave more appreciation to the actual product images which combine generic brand with PDO and local brand under direct marketing approaches, to local branded products exposing core benefit with the region of origin and sensory quality, and to local branded products with augmented product image reprenting visual quality attributes, respectively. [ABSTRACT FROM AUTHOR]

The photovoltaic performance of blends of a series of 4,4′-Difluoro-4-bora-3a,4a-diaza-s-indacenes)-based (BODIPY) conjugated polymers donors with fullerene electron acceptors is investigated. Despite the high Voc values observed, solar cell device yields relatively low power conversion efficiencies. Our study takes into account the materials’ structure-property relationship, light harvesting capabilities, charge transport, collection properties and morphological characteristics to elucidate factors affecting the photovoltaic performance in this class of polymers. We show that elimination of low molecular weight species and suitable electrodes for hole collection can be used to overcome some of the observed limitations on photovoltaic performance. [ABSTRACT FROM AUTHOR]

The aims of the study were to determine the factors impacting on drinking milk consumption decisions of the consumers in Erzurum, and to provide the information to suppliers on how to implement the strategic marketing decisions by considering the main factors effecting on the milk consumption amounts based on homogenous consumer segments. The primary data obtained from a face-to-face questionnaire with 250 households residing in Erzurum, therefore, were the main material of the research. Principal Component Analysis (PCA) for the consumption preference factors of consumers' drinking milk, K-means Cluster Analysis for homogenous cluster segments related to high, middle, low-income professionals and Multiple Regression Analyses (MRC) to determine the efficiencies of the factors affecting the milk consumption amounts were used by taking into consideration these data. The results of the study highlighted that the high, middle and lowincome consumers gave purchase decisions towards drinking milk with the augmented product image processed as organic, with actual product image differentiated under the price discriminations and the generic raw milk focused on the core benefits, respectively. According to these results, the brand strategies related to the global/national brands under organic milk mix with high image, the private labels covering the actual product mix and the generic brands with region of origin focused on the core benefit could be implemented for homogeneous consumers segments, respectively. [ABSTRACT FROM AUTHOR]

The enormous synthetic efforts on novel solar cell materials require a reliable and fast technique for the rapid screening of novel donor/acceptor combinations in order to quickly and reliably estimate their optimized parameters. Here, we report the applicability of such a versatile and fast evaluation technique for bulk heterojunction (BHJ) organic photovoltaics (OPV) by utilizing a steady-state photoluminescence (PL) method confirmed by electroluminescence (EL) measurements. A strong relation has been observed between the residual singlet emission and the charge transfer state emission in the blend. Using this relation, a figure of merit (FOM) is defined from photoluminescence and also electroluminescence measurements for qualitative analysis and shown to precisely anticipate the optimized blend parameters of bulk heterojunction films. Photoluminescence allows contactless evaluation of the photoactive layer and can be used to predict the optimized conditions for the best polymer–fullerene combination. Most interestingly, the contactless, PL-based FOM method has the potential to be integrated as a fast and reliable inline tool for quality control and material optimization. [ABSTRACT FROM AUTHOR]

The tandem concept involves stacking two or more cells with complementary absorption spectra in series or parallel connection, harvesting photons at the highest possible potential. It is strongly suggested that the roll-to-roll production of organic solar cells will employ the tandem concept to enhance the power conversion efficiency (PCE). However, due to the undeveloped deposition techniques, the challenges in ink formulation as well as the lack of commercially available high performance active materials, roll-to-roll fabrication of highly efficient organic tandem solar cells currently presents a major challenge. The reported high PCE values from lab-scale spin-coated devices are, of course, representative, but not helpful for commercialization. Here, organic tandem solar cells with exceptionally high fill factors and PCE values of 7.66% (on glass) and 5.56% (on flexible substrate), which are the highest values for the solution-processed tandem solar cells fabricated by a mass-production compatible coating technique under ambient conditions, are demonstrated. To predict the highest possible performance of tandem solar cells, optical simulation based on experimentally feasible values is performed. A maximum PCE of 21% is theoretically achievable for an organic tandem solar cell based on the optimized bandgaps and achieved fill factors. [ABSTRACT FROM AUTHOR]

Photovoltaic tandem technology has the potential to boost the power conversion efficiency of organic photovoltaic devices. Here, a reliable and efficient fully solution-processed intermediate layer (IML) consisting of ZnO and neutralized poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is demonstrated for series-connected multi-junction organic solar cells (OSCs). Drying at 80 °C in air is sufficient for this solution-processed IML to obtain excellent functionality and reliability, which allow the use of most of high performance donor materials in the tandem structure. An open circuit voltage ( Voc) of 0.56 V is obtained for single-junction OSCs based on a low band-gap polymer, while multi-junction OSCs based on the same absorber material deliver promising fill factor values along with fully additive Voc as the number of junctions increase. Optical and electrical simulations, which are reliable and promising guidelines for the design and investigation of multi-junction OSCs, are discussed. The outcome of optical and electrical simulations is in excellent agreement with the experimental data, indicating the outstanding efficiency and functionality of this solution-processed IML. The demonstration of this efficient, solution-processed IML represents a convenient way for facilitating fabrication of multi-junction OSCs to achieve high power conversion efficiency. [ABSTRACT FROM AUTHOR]

A new donor-acceptor copolymer consisting of triazoloquinoxaline and 9,9-dialkylfluorene units on the main chain has been synthesized, characterized and evaluated as donor material in bulk heterojunction solar cells using PC61BM as an acceptor. The resulting polymer PTQF showed good thermal stability and solubility in common organic solvents. Cyclic Voltammetry measurements showed that the PTQF has HOMO-LUMO energy levels of −5.13 and −3.62 eV, respectively. DFT calculations revealed that the HOMO is delocalized all over the thiophene and fluorene units and the LUMO is localized mainly on the triazole and pyrazine units. PTQF absorbs broadly in the visible region and exhibits a bandgap of 1.4 eV. Photovoltaic devices exhibited 1.7% efficiency for 1:2 PTQF:PC61BM blend ratio using Ca/Ag electrodes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013 [ABSTRACT FROM AUTHOR]

Abstract: A series of variable alkyl chain length substituted donor–acceptor (D–A) conjugated polymers with thiophene ring as the donor and benzotriazole moiety as the acceptor has been investigated in bulk heterojunction solar cells. The optical and electrochemical properties showed that the absorption onsets and the energy levels of the copolymers were not affected by alkyl substitution revealing 1.9eV of optical band gap. The morphologies of the blend film can be fine-tuned by increasing the chain length attached to the benzotriazole unit. Photovoltaic devices were fabricated using (6,6)-phenyl-C61-butyric acid methyl ester (PC60BM) and (6,6)-phenyl-C71-butyric acid methyl ester (PC70BM) as the acceptors. The maximum performance was achieved with a V oc of 0.75V, J sc of 3.70mA/cm2, FF of 45% and a PCE of 1.23% for the PTBT-DA10:PC70BM device using 1:4 w/w ratio in chlorobenzene (CB). [Copyright &y& Elsevier]

Abstract: 4,7-Bis(2,3-dihydrothieno [3,4-b] [1,4] dioxin-5-yl)-2-dodecyl-2H-benzo [1,2,3] triazole (BEBT) was polymerized both electrochemically (ePBEBT) and chemically (cPBEBT). Since chemical polymerization enabled a soluble polymer in common organic solvents, a single layer electrochromic device of ePBEBT was constructed. The polymer cPBEBT was also used in bulk heterojunction (BHJ) solar cells as the active layer in combination with a soluble fullerene derivative, 1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6)C61 PCBM. [Copyright &y& Elsevier]

Abstract: Electrochemical copolymerization was utilized to combine several properties into a single material in order to obtain a highly stable polymer with a low band gap to meet the requirements for color variation. In that sense, two new donor acceptor type electrochromic copolymers of 2,3-bis(4-tert-butylphenyl)-5,8-di(1H-pyrrol-2-yl) quinoxaline (TBPPQ) with bis(3,4-ethylenedioxythiophene) (BiEDOT) and with 4,7-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-2-dodecyl-2H-benzo [1,2,3] triazole (BEBT) were synthesized by electrochemical polymerization. Polymers revealed multicolor electrochromic properties with distinct accessible states and low operation potentials. Electrochromic and kinetic properties of polymers were investigated using cyclic voltammetry (CV) and in situ UV–vis–NIR spectroscopy. [Copyright &y& Elsevier]

Abstract: We report on the photophysical properties and photovoltaic performance of a polythiophene derivative, poly-2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl)quinoxaline (PHTQ) as an electron donor in bulk heterojunction solar cells blended with the acceptor 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene (PCBM). Devices were composed of PHTQ and varying amounts of PCBM (1:1, 1:2, 1:3, 1:4 w-w ratio). The components were spin cast from ortho-dichlorobenzene (ODCB) and characterized by measuring current–voltage characteristics under simulated AM 1.5 conditions. Efficiencies up to 0.3% have been reached. Incident photon to current efficiency (IPCE) is reported and the nanoscale morphology was investigated with atomic force microscopy (AFM). Photoinduced absorption spectroscopy confirms the photoinduced charge transfer in such donor acceptor blends. [Copyright &y& Elsevier]

Two‐photon Polymerization (2PP) process for high‐resolution 3D printing presents an opportunity to design micro‐scale structures with a high surface‐to‐volume ratio for highly responsive devices. However, these acrylate or thiol‐based resins are electrically insulating and non‐functional in nature, therefore limiting their widespread application in biosensing and biotechnology. Here, a novel conductive polymeric composite resin to print conductive 3D micro‐structures via the 2PP technique is developed and its application in sensing are demonstrated. The composite consists of acrylate‐based 2PP resin and Poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS), a conductive and biocompatible organic semiconductor The PEDOT:PSS incorporation in resin through Raman and X‐ray photoelectron spectroscopy (XPS) is studied. An electrical conductivity of 3.5 × 102 S cm−1 in a 20 µm long and 10 µm high 3D printed micro‐structure which is suitable for electronic applications is achieved. An ultra‐fast micro‐3D printed humidity sensor with a response and recovery time of 0.15 and 0.3 s respectively is demonstrated. The printed sensors show high sensitivity in humidity levels of 0–80%RH. As a proof of concept, the real‐time respiration of a human body is recorded, implying a potential application in health monitoring systems. [ABSTRACT FROM AUTHOR]

A polymer switching between all RGB colors, black and transmissive states was synthesized. The polymer (PTBT) is soluble, processable, both p- and n-dopable, fluorescent and its properties in entire spectrum offer potential uses in NIR devices, LEDs and solar cells. PTBT possesses almost all properties in a single polymer for optoelectronic applications. [ABSTRACT FROM AUTHOR]

A polymer switching between all RGB colors, black and transmissive states was synthesized. The polymer (PTBT) is soluble, processable, both p- and n-dopable, fluorescent and its properties in entire spectrum offer potential uses in NIR devices, LEDs and solar cells. PTBT possesses almost all properties in a single polymer for optoelectronic applications. [ABSTRACT FROM AUTHOR]

Recent advances in light‐responsive materials enabled the development of devices that can wirelessly activate tissue with light. Here it is shown that solution‐processed organic heterojunctions can stimulate the activity of primary neurons at low intensities of light via photochemical reactions. The p‐type semiconducting polymer PDCBT and the n‐type semiconducting small molecule ITIC (a non‐fullerene acceptor) are coated on glass supports, forming a p–n junction with high photosensitivity. Patch clamp measurements show that low‐intensity white light is converted into a cue that triggers action potentials in primary cortical neurons. The study shows that neat organic semiconducting p–n bilayers can exchange photogenerated charges with oxygen and other chemical compounds in cell culture conditions. Through several controlled experimental conditions, photo‐capacitive, photo‐thermal, and direct hydrogen peroxide effects on neural function are excluded, with photochemical delivery being the possible mechanism. The profound advantages of low‐intensity photo‐chemical intervention with neuron electrophysiology pave the way for developing wireless light‐based therapy based on emerging organic semiconductors. [ABSTRACT FROM AUTHOR]

Solution‐processable halide perovskites have emerged as strong contenders for next‐generation solar cells owing to their favorable optoelectronic properties. To maintain the efficiency momentum of perovskite solar cells (PSCs), development of advanced processing techniques, particularly for the perovskite layer, is imperative. There is a close correlation between the quality of the perovskite layer and its photophysical properties: Highly crystalline large grains with uniform morphology of the perovskite layer and their interface with charge transporters are crucial for achieving high performance. Significant efforts have been dedicated to achieve perovskite films with large grains reaching the millimeter‐scale for high‐efficiency PSCs. Recent work showcases a transition from large grain polycrystalline to single‐crystalline (SC) PSCs made possible by the facile growth of perovskite single crystals. In this review, the recent progress of the large grain polycrystalline PSCs and grain boundary‐free SC‐PSCs is reported, particularly focusing on the recent approach of depositing large‐grained perovskite layers and single crystal growth technique, that have been adopted for fabrication of efficient PSCs. In addition, prospects of SC‐PSCs and their further development in terms of efficiency, device design, scalability, and stability are discussed. [ABSTRACT FROM AUTHOR]

Non‐fullerene acceptor (NFA)‐based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. The impact on QE of the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces is studied in blends of PBDB‐T‐2F donor with several pairs of lower bandgap NFAs. As in binary blends, the ionization energy offset between donor and acceptor (ΔIE) controls the QE and maximizes for ΔIE > 0.5 eV. However, ΔIE is not controlled by the individual NFAs IEs but by their average, weighted for their blending ratio. Using this property, the QE of a PBDB‐T‐2F:IEICO binary blend that has an insufficient ΔIE for charge generation is improved by adding a deep IE third component: IT‐4F. Combining two NFAs enables to optimize the D/A energy alignment and cells' QE without molecular engineering. [ABSTRACT FROM AUTHOR]

The organic photodiode (OPD) is a promising building block for solution‐processable, flexible, lightweight, and miniaturized photodetectors, ideal for wearable applications. Despite the advances in materials used in OPDs, their photocurrent and light responsivity are limited, and alternative methods are required to boost the signal response. Herein, a miniaturized organic electrochemical transistor (OECT) is integrated with an OPD module to unlock the potential of OPDs to acquire physiological signals. In this integrated photodetector (IPD) system, the light intensity regulates the OPD voltage output that modulates the OECT channel current. The high transconductance of the OECT provides efficient voltage‐to‐current conversion, enhancing the signal‐to‐noise ratio on the sensing site. A microscale, p‐type enhancement‐mode OECT with high gm and fast switching speed performs better in this application than depletion‐mode OECT of the same geometry. The IPD achieves a photocurrent and responsivity 318 and 140 times higher than the standalone OPD, respectively. It is shown that with the IPD, the amplitude of the photoplethysmogram signals detected by the OPD is enhanced by a factor of 2.9 × 103, highlighting its potential as a wearable biosensor and to detect weak, often uncaptured, light‐based signals from living systems. [ABSTRACT FROM AUTHOR]

Efficiencies of organic solar cells have practically doubled since the development of non‐fullerene acceptors (NFAs). However, generic chemical design rules for donor‐NFA combinations are still needed. Such rules are proposed by analyzing inhomogeneous electrostatic fields at the donor–acceptor interface. It is shown that an acceptor–donor–acceptor molecular architecture, and molecular alignment parallel to the interface, results in energy level bending that destabilizes the charge transfer state, thus promoting its dissociation into free charges. By analyzing a series of PCE10:NFA solar cells, with NFAs including Y6, IEICO, and ITIC, as well as their halogenated derivatives, it is suggested that the molecular quadrupole moment of ≈75 Debye Å balances the losses in the open circuit voltage and gains in charge generation efficiency. [ABSTRACT FROM AUTHOR]

An equivalent ohmic contact is successfully formed between low‐conductivity poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS) and solution‐processed aluminum‐doped ZnO (AZO). Because of its promising optical and electrical properties, this combination can serve as an efficient interconnection layer as well as an optical spacer in inverted‐structure organic tandem devices. [ABSTRACT FROM AUTHOR]

Abstract: 2-Dodecyl benzotriazole (BTz) and benzothiadiazole (BTd) containing alternating copolymers poly(4-(2-dodecyl-2H-benzo[d][1,2,3]triazol-4-yl)benzo[c][1,2,5]thiadiazole (P1), poly(4-(5-(2-dodecyl-7-(thiophen-2yl)-2H-benzo[d][1,2,3]triazol-4-yl)thiophen-2-yl)benzo[c] [1,2,5] thiadiazole (P2) and poly(4-(5-(2-dodecyl-7-(4-hexylthiophen-2-yl)-2H-benzo[d] [1,2,3]triazol-4-yl) -3-hexylthiophen-2-yl) benzo[c][1,2,5] thiadiazole (P3) were synthesized via Suzuki polycondensation reactions. The solubility of the polymers enabled spray coating to carry out the electrochemical and optical studies. Electronic and optical properties of resulting polymers showed that P2 is a great candidate to be used as processable blue electrochromic polymer which can switch to transparent upon oxidation. P3 was also investigated in terms of its electrochromic performance which has two different colored and a transparent states, whereas P1 does not exhibit any spectral change upon applied potentials. HOMO and LUMO values, band gaps and kinetic behavior of polymers upon externally applied potential are reported in detail. [Copyright &y& Elsevier]

Tuning the bandgap of electrochromic polymers is one of the important research topics in electrochromism. To understand clearly the effect of donor unit in donor-acceptor-donor-type polymers, 2,3-bis(4- tert-butylphenyl)-5,8-di(thiophen-2-yl)quinoxaline and 2,3-bis(4- tert-butylphenyl)-5-(2,3-dihydrothieno[3,4- b][1,4]dioxin- 5-yl)-8-(thiophen-2-yl)quinoxaline were synthesized and polymerized potentiodynamically. Their electrochemical and spectroelectrochemical studies were performed, and the results were compared with those of poly(2,3-bis(4- tert-butylphenyl)-5,8-bis(2,3-dihydrothieno[3,4- b][1,4]dioxin-5-yl)quinoxaline) (Gunbas et al., Adv Mater 2008, 20, 691-695). A blue shift in the polymer π-π* transitions revealed that the bandgap of such polymers with the same acceptor unit is related to the electron density of donor units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 [ABSTRACT FROM AUTHOR]

Abstract: Two low band gap conjugated polymers, poly[4,9-bis(4-hexylthien-2-yl)-6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline] (PHTTQ) and poly[5,10-bis(4-hexylthien-2-yl)-2,3,7,8-tetra(thien-2-yl)pyrazino[2,3-g]quinoxaline] (PHTPQ), consisting of alternating electron-rich 3-hexylthiophene and electron-deficient 6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline (TTQ) and 2,3,7,8-tetra(thien-2-yl)-2,3-dihydropyrazino[2,3-g]quinoxaline (TPQ) units were synthesized electrochemically. The structures of the π-conjugated monomers were tailored using thiophene as the pendant group on the acceptor units (TTQ and TPQ). The electrochemical and optical properties of the polymers were investigated by cyclic voltammetry and UV–vis–NIR spectroscopy. The absorption spectra of PHTPQ, revealing a 1.0eV band gap, exhibited three maxima at 352nm, 535nm, and 750nm. Consequently, its absorption spectra cover the region between 400 and 800nm, which make the polymer almost black in appearance. PHTTQ shows a λ max value of 820nm and a band gap of 0.8eV which is very low among other [1,2,5]thiadiazolo[3,4-g]quinoxaline-containing donor–acceptor type polymers. [Copyright &y& Elsevier]

Abstract: Two new quinoxaline and ethylenedioxythiophene (EDOT) based polymers; poly(5,8-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-2-(phenyll)-3-ferrocenylquinoxaline) (P1) and poly(5,8-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-2,3-di(naphthalen-2-yl) quinoxaline) (P2) were synthesized and characterized in terms of their electrochemical and spectroelectrochemical properties. The polymers were both p and n-type dopable. The polymers can be switched between green and transparent states during p-doping/dedoping. They were compared with their previously reported analogues in order to investigate ferrocene pendant group effect on electrochromic characteristics. [ABSTRACT FROM AUTHOR]

Abstract: 2-Dodecyl benzotriazole and 9,9-dioctylfluorene containing alternating copolymers poly((9,9-dioctylfluorene)-2,7-diyl-(2-dodecyl-benzo[1,2,3]triazole)) (P1), poly((9,9-dioctylfluorene)-2,7-diyl-(4,7-bis(thien-2-yl) 2-dodecyl-benzo[1,2,3]triazole)) (P2), poly((9,9-dioctylfluorene)-2,7-diyl-(4,7-bis(3-hexylthien-5-yl) 2-dodecyl-benzo[1,2,3]triazole)) (P3) were synthesized via Suzuki polycondensation. Electronic and optical properties of resulting polymers showed that all polymers are both p and n dopable and have multicolored electrochromic states. HOMO and LUMO values, band gaps and spectral response of polymers upon externally applied potential and trifluoro acetic acid (TFA) addition were given in detail. [ABSTRACT FROM AUTHOR]

Abstract: Donor–acceptor–donor (DAD) type benzimidazole (BIm) and 3,4 ethylenedioxythiophene (EDOT) bearing monomers were synthesized and electrochemically polymerized. Pendant group at 2-C position of the imidazole ring was functionalized with phenyl (P1), EDOT (P2) and ferrocene (P3) in order to observe substituent effect on electrochemical and electrochromic properties of corresponding polymers. Spectroelectrochemical results showed that different pendant groups resulted in polymers with slightly different optical band gaps (1.75, 1.69 and 1.77 eV respectively) and different number of achievable colored states. Optoelectronic performance and comparison of results with other well known π-accepting benzazole bearing DAD type polymers were reported in detail. [ABSTRACT FROM AUTHOR]

Abstract: A benzothiadiazole bearing donor–acceptor–donor (D–A–D) type monomer (M3) was synthesized using the combination of 3, 4-ethylenedioxythiophene (EDOT) and thiophene donor units to understand the effect of donor strength on the optoelectronic and electrochemical properties. The resulting monomer was polymerized electrochemically (P3) and compared with its symmetrical thiophene (P1) and EDOT (P2) bearing homologues whether there exists a combination of the electrochemical and optical characteristics. Also, copolymer studies were performed with symmetrical thiophene (M1) and EDOT (M2) containing monomers in order to compare the results with P3. Cyclic voltammetry (CV) and spectroelectrochemistry results revealed that P3 is a low band gap polymer (1.18eV) having both p-and n-type property which is superior to the copolymers synthesized using M1 and M2. [ABSTRACT FROM AUTHOR]

Abstract: Ferrocene substituted donor–acceptor–donor type polymer; poly(5,8-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-2-(naphthalen-2-yl)-3-ferrocenyl-4a,8a-dihydroquinoxaline) (PDEFNQ) was synthesized and its electrochromic properties were investigated. Cyclic voltammetry and spectroelectrochemistry studies for PDEFNQ showed that it is a multichromic green to transmissive polymer with high tendency to be both p and n doped. PDEFNQ is foreseen as a promising candidate for various applications. [Copyright &y& Elsevier]

Sputtered nickel oxide (NiOx) is an attractive hole‐transport layer for efficient, stable, and large‐area p‐i‐n metal‐halide perovskite solar cells (PSCs). However, surface traps and undesirable chemical reactions at the NiOx/perovskite interface are limiting the performance of NiOx‐based PSCs. To address these issues simultaneously, an efficient NiOx/perovskite interface passivation strategy by using an organometallic dye molecule (N719) is reported. This molecule concurrently passivates NiOx and perovskite surface traps, and facilitates charge transport. Consequently, the power conversion efficiency (PCE) of single‐junction p‐i‐n PSCs increases from 17.3% to 20.4% (the highest reported value for sputtered‐NiOx based PSCs). Notably, the N719 molecule self‐anchors and conformally covers NiOx films deposited on complex surfaces. This enables highly efficient textured monolithic p‐i‐n perovskite/silicon tandem solar cells, reaching PCEs up to 26.2% (23.5% without dye passivation) with a high processing yield. The N719 layer also forms a barrier that prevents undesirable chemical reactions at the NiOx/perovskite interface, significantly improving device stability. These findings provide critical insights for improved passivation of the NiOx/perovskite interface, and the fabrication of highly efficient, robust, and large‐area perovskite‐based optoelectronic devices. [ABSTRACT FROM AUTHOR]

Monolithically stacked tandem solar cells present opportunities to absorb more of the sun's radiation while reducing the degree of energetic loss through thermalization. In these applications, the bandgap of the tandem's constituent subcells must be carefully adjusted so as to avoid competition for photons. Organic photovoltaics based on nonfullerene acceptors (NFAs) have recently exploded in popularity owing to the ease with which their electrical and optical properties can be tuned through chemistry. Here, highly complementary and efficient 2‐terminal tandem solar cells are reported based on a wide bandgap amorphous silicon absorber, and a narrow bandgap NFA bulk‐heterojunction with power conversion efficiencies (PCEs) exceeding 15%. Interface engineering of this tandem device allows for high PCEs across a wide range of light intensities both above and below "1 sun." Furthermore, the addition of an inorganic silicon subcell enhances the operational stability of the tandem by reducing the light‐stress experienced by the bulk heterojunction, resolving a long‐standing stumbling block in organic photovoltaic research. [ABSTRACT FROM AUTHOR]

Slot‐die (SD) coating is used to fabricate fully solution processed organic solar cells (OSCs) based on a blend of high performance donor polymer (PTB7‐Th) and a non‐fullerene acceptor (IEICO‐4F) for stable devices over extended periods of operation. The optimization of a sequential deposition process of transport and active layers, under ambient conditions, enable high efficiency slot‐die coated solar cells with remarkable power conversion efficiencies (PCE) > 11.0% to bridge the gap between lab‐to‐fab. Fully slot‐die coated inverted OSCs are demonstrated with efficiencies reaching 11% along with 1 cm2 devices, proving the scalability and reproducibility of the proposed technique. Further, replacing the evaporated Ag electrode with solution processed Ag nanowire (AgNW) electrodes shows the highest light utilization efficiency of 5.26% for semi‐transparent OSC with a PCE of 9.07% and average visible transmission of 58%. [ABSTRACT FROM AUTHOR]

New polymer donors and nonfullerene acceptors have elevated the performance and stability of solar cells to higher grounds. To achieve their full potential, they require their adaptation to scalable and cost‐effective solution manufacturing techniques for large area deposition. Likewise, formulating scalable solution‐based transport layer inks that are compatible with the photoactive layer is imperative. This manuscript reports the full integration of solution‐based transport layers and electrode alongside a PTB7‐Th:IEICO‐4F bulk heterojunction in inverted architecture through inkjet‐printing, resulting in power conversion efficiencies up to 12.4% opaque devices and 9.5% semitransparent devices with average visible transmittance values of 50.1%, including hole transport layer. The wetting envelope of the highly‐hydrophobic photoactive layer alongside the surface energy of candidate solutions and solvents allows the formulation of thick transport layer inks that are compatible with the drop‐on‐demand inkjet‐printing process and yield uniform and homogenous films. Moreover, the surface energy components of the donor and acceptor serves as a fingerprint to assess the vertical stratification of the photoactive layer with the inclusion of different solvents. This methodology addresses a scale‐up bottleneck of solution‐based transport layers for high‐efficiency organic cells, enabling its adaptation to high‐throughput techniques including slot‐die and roll‐to‐roll coating. [ABSTRACT FROM AUTHOR]

B Organic Bioelectronic b Highly photosensitive, organic p-n junctions stimulate primary neurons when illuminated with low-intensity light I via i photochemical reactions. The profound advantages of low-intensity, photo-chemical intervention with neuron electrophysiology, pave the way for developing wireless, light therapy, based on emerging organic semiconductors. The electrophysiology of primary neurons can be influenced by photochemical reactions, even when these neurons are situated away from the surface of polymers. [Extracted from the article]

While photovoltaic blends based on non‐fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene‐based acceptors that readily co‐crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine‐grained ternary blend with nanometer‐sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high‐temperature processing protocols, which are needed for upscaling and high‐throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability. [ABSTRACT FROM AUTHOR]

Power conversion efficiencies of perovskite solar cells (PSCs) have rapidly increased from 3.8% to a certified 25.2% within only a decade. Eliminating possible recombination losses at the interfaces is essential to further improve both efficiency and stability of this class of emerging photovoltaic technology. Herein, a simple approach for improving the electron extraction of the PC60BM electron transport layer (ETL) is presented by sequentially depositing Al:ZnO (AZO) and triphenyl‐phosphine oxide (TPPO) on top of it, in a p–i–n device configuration. The efficiency of the resulting CH3NH3PbI3‐based solar cell is shown to improve from 14.6%, measured for the control PC60BM‐only cell, to 17.9% for double‐ETL (PC60BM/AZO) and 19.2% for triple‐ETL (PC60BM/AZO/TPPO)‐based devices, respectively. Optimized triple‐ETL‐based cells exhibit high fill factor of 82%. The combination of electrical and quantum mechanical calculations shows that efficiency improvement is attributed to reduced trap‐assisted recombination at the interface and better energy level alignment due to chemical interactions between PC60BM, AZO, and TPPO. Moreover, it is shown that the use of multilayer ETL results in better device stability (T80 ≈ 800 h) under constant illumination. This work opens new possibilities for inexpensive highly efficient and stable multilayered contacts for PSCs by combining organic small molecules and metal oxides. [ABSTRACT FROM AUTHOR]

Ultra‐lightweight solar cells have attracted enormous attention due to their ultra‐conformability, flexibility, and compatibility with applications including electronic skin or miniaturized electronics for biological applications. With the latest advancements in printing technologies, printing ultrathin electronics is becoming now a reality. This work offers an easy path to fabricate indium tin oxide (ITO)‐free ultra‐lightweight organic solar cells through inkjet‐printing while preserving high efficiencies. A method consisting of the modification of a poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) ink with a methoxysilane‐based cross‐linker (3‐glycidyloxypropyl)trimethoxysilane (GOPS)) is presented to chemically modify the structure of the electrode layer. Combined with plasma and solvent post‐treatments, this approach prevents shunts and ensures precise patterning of solar cells. By using poly(3‐hexylthiophene) along rhodanine‐benzothiadiazole‐coupled indacenodithiophene (P3HT:O‐IDTBR), the power conversion efficiency (PCE) of the fully printed solar cells is boosted up to 4.73% and fill factors approaching 65%. All inkjet‐printed ultrathin solar cells on a 1.7 µm thick biocompatible parylene substrate are fabricated with PCE reaching up to 3.6% and high power‐per‐weight values of 6.3 W g−1. After encapsulation, the cells retain their performance after being exposed for 6 h to aqueous environments such as water, seawater, or phosphate buffered saline, paving the way for their integration in more complex circuits for biological systems. [ABSTRACT FROM AUTHOR]

Copolymerization towards obtaining full visible light absorption is highlighted. Randomly distributed segments of different oligomers resulted in neutral state black copolymers. Solution processability and highly transmissive gray oxidized states make copolymers great candidates to be used in low cost flexible organic electronics. [ABSTRACT FROM AUTHOR]

The recent re‐emergence of halide perovskites has received escalating interest for optoelectronic applications. In addition to photovoltaics, the multifunctional nature of halide perovskites has led to diverse applications. The ultralow thermal conductivity coupled with decent mobility and charge carrier tunability led to the prediction of halide perovskites as a possible contender for future thermoelectrics. Herein, recent advances in thermal transport of halide perovskites and their potentials and challenges for thermoelectrics are reviewed. An overview of the phonon behavior in halide perovskites, as well as the compositional dependency is analyzed. Understanding thermal transport and knowing the thermal conductivity value is crucial for creating effective heat dissipation schemes and determining other thermal‐related properties like thermo‐optic coefficients, hot‐carrier cooling, and thermoelectric efficiency. Recent works on halide perovskite‐based thermoelectrics together with theoretical predictions for their future viability are highlighted. Also, progress on modulating halide perovskite‐based thermoelectric properties using light and chemical doping is discussed. Finally, strategies to overcome the limiting factors in halide perovskite thermoelectrics and their prospects are emphasized. [ABSTRACT FROM AUTHOR]

Fullerenes have formed an integral part of high performance organic solar cells over the last 20 years, however their inherent limitations in terms of synthetic flexibility, cost and stability have acted as a motivation to develop replacements; the so-called non-fullerene electron acceptors. A rapid evolution of such materials has taken place over the last few years, yielding a number of promising candidates that can exceed the device performance of fullerenes and provide opportunities to improve upon the stability and processability of organic solar cells. In this review we explore the structure–property relationships of a library of non-fullerene acceptors, highlighting the important chemical modifications that have led to progress in the field and provide an outlook for future innovations in electron acceptors for use in organic photovoltaics. [ABSTRACT FROM AUTHOR]

Abstract: Poly (3‐hexylthiophene) (P3HT) was an early frontrunner in the development of donor polymers to be used in organic photovoltaics. A relatively straightforward and inexpensive synthesis suggests that it may be the most viable donor polymer to use in large‐scale commercial organic solar cells. Replacing fullerenes with new electron acceptors has led to significant improvements in device performance and stability, with devices now able to exceed an efficiency of 7%. Past studies have reported a dependence of device performance on the molecular weight of the polymer in fullerene‐containing blends, however, with nonfullerene acceptors now showing promise a similar study was needed. P3HT blends, with two nonfullerene acceptors (O‐IDTBR and EH‐IDTBR), were probed using a number of polymer batches with varying molecular weights. O‐IDTBR was shown to exhibit a dependence on the polymer molecular weight, with optimal performance achieved with a 34 kDa polymer, while EH‐IDTBR displayed an independence in performance with varying polymer molecular weight. Probing the thermal and morphological behavior of the P3HT:O‐IDTBR blends suggests that an optimal morphology with pronounced donor and acceptor domains was only achieved with the 34 kDa polymer, and a greater degree of mixing was exhibited in the other blends, likely leading to poorer device performance. [ABSTRACT FROM AUTHOR]

Abstract: N‐type organic small molecules (SMs) are attracting attention in the organic electronics field, due to their easy purification procedures with high yield. However, only a few reports show SMs that perform well in both organic field‐effect transistors (OFETs) and organic solar cells (OSCs). Here, the synthesis and characterization of an n‐type small molecule with an indacenodithieno[3,2‐b]thiophene (IDTT) core unit and linear alkylated side chain (C16) (IDTTIC) are reported. Compared to the state‐of‐the‐art n‐type molecule IDTIC, IDTTIC exhibits smaller optical bandgap and higher absorption coefficient, which is due to the enhanced intramolecular effect. After mixing with the polymer donor PBDB‐T, IDTIC‐based solar cells deliver a power conversion efficiency of only 5.67%. In stark contrast, the OSC performance of IDTTIC improves significantly to 11.2%. It is found that the superior photovoltaic properties of PBDB‐T:IDTTIC blends are mainly due to reduced trap‐assisted recombination and enhanced molecular packing coherence length and higher domain purity when compared to IDTIC. Moreover, a significantly higher electron mobility of 0.50 cm2 V−1 s−1 for IDTTIC in OFET devices than for IDTIC (0.15 cm2 V−1 s−1) is obtained. These superior performances in OSCs and OFETs demonstrate that SMs with extended π‐conjugation of the backbone possess a great potential for application in organic electronic devices. [ABSTRACT FROM AUTHOR]

Abstract: The solution‐processed organic photodetectors underpin an emerging technology with inherent implications in the biological sensors and imaging displays. Conventional organic photodiodes, the core element of an organic photodetector, rely mainly on fullerene‐based acceptors, which in combination with high and middle bandgap donors, limit the spectral photosensitivity to the visible range. Even in the case of low bandgap polymers the oscillator strength and thus the extinction coefficient are usually limited in the NIR due to the nature of molecular orbital hybridization. Instead, it is showed that pairing prototypical poly(3‐hexylthiophene) (P3HT) with rhodanine‐benzothiadiazole‐coupled indacenodithiophene (IDTBR), a nonfullerene electron acceptor absorbing beyond 750 nm, as the photoactive material of a simple photodiode results in a highly efficient organic photodetector with a record responsivity of 0.42 A W−1 and external quantum efficiency (EQE) of 69% in the NIR (755 nm). Nonfullerene‐based photodiodes are processed on amorphous silicon active matrix backplanes to realize large area flat panel photodetector imagers able to detect objects under visible and NIR light conditions with an exceptional combination of responsivity, dynamic response and image crosstalk. [ABSTRACT FROM AUTHOR]

Abstract: Organic bulk heterojunction solar cells based on small molecule acceptors have recently seen a rapid rise in the power conversion efficiency with values exceeding 13%. This impressive achievement has been obtained by simultaneous reduction of voltage and charge recombination losses within this class of materials as compared to fullerene‐based solar cells. In this contribution, the authors review the current understanding of the relevant photophysical processes in highly efficient nonfullerene acceptor (NFA) small molecules. Charge generation, recombination, and charge transport is discussed in comparison to fullerene‐based composites. Finally, the authors review the superior light and thermal stability of nonfullerene small molecule acceptor based solar cells, and highlight the importance of NFA‐based composites that enable devices without early performance loss, thus resembling so‐called burn‐in free devices. [ABSTRACT FROM AUTHOR]

We report the synthesis of two barbiturate end-capped non-fullerene acceptors and demonstrate their efficient function in high voltage output organic solar cells. The acceptor with the lower LUMO level is shown to exhibit suppressed geminate recombination losses, resulting in enhanced photocurrent generation and higher overall device efficiency. [ABSTRACT FROM AUTHOR]

Abstract: Nonfullerene acceptors (NFAs) in blends with highly crystalline donor polymers have been shown to yield particularly high device voltage outputs, but typically more modest quantum yields for photocurrent generation as well as often lower fill factors (FF). In this study, we employ transient optical and optoelectronic analysis to elucidate the factors determining device photocurrent and FF in blends of the highly crystalline donor polymer PffBT4T‐2OD with the promising NFA FBR or the more widely studied fullerene acceptor PC71BM. Geminate recombination losses, as measured by ultrafast transient absorption spectroscopy, are observed to be significantly higher for PffBT4T‐2OD:FBR blends. This is assigned to the smaller LUMO‐LUMO offset of the PffBT4T‐2OD:FBR blends relative to PffBT4T‐2OD:PC71BM, resulting in the lower photocurrent generation efficiency obtained with FBR. Employing time delayed charge extraction measurements, these geminate recombination losses are observed to be field dependent, resulting in the lower FF observed with PffBT4T‐2OD:FBR devices. These data therefore provide a detailed understanding of the impact of acceptor design, and particularly acceptor energetics, on organic solar cell performance. Our study concludes with a discussion of the implications of these results for the design of NFAs in organic solar cells. [ABSTRACT FROM AUTHOR]

A novel fused heterocycle-flanked diketopyrrolopyrrole (DPP) monomer, thieno[2,3-b]pyridine diketopyrrolopyrrole (TPDPP), was designed and synthesized. When copolymerized with 3,4-difluorothiophene using Stille coupling polymerization, the new polymer pTPDPP-TF possesses a highly planar conjugated polymer backbone due to the fused thieno[2,3-b]pyridine flanking unit that effectively alleviates the steric hindrance with both the central DPP core and the 3,4-difluorothiophene repeat unit. This new polymer exhibits a high electron affinity (EA) of -4.1 eV and was successfully utilized as an n-type polymer semiconductor for applications in organic field-effect transistors (OFETs) and all polymer solar cells. A promising n-type charge carrier mobility of 0.1 cm2 V-1 s-1 was obtained in bottom-contact, top-gate OFETs, and a power conversion efficiency (PCE) of 2.72% with a high open-circuit voltage (VOC) of 1.04 V was achieved for all polymer solar cells using PTB7-Th as the polymer donor. [ABSTRACT FROM AUTHOR]