Search

Since entering orbit on July 4, 2016, the Juno spacecraft has executed 34 closest approach passes of Jupiter, completing the prime mission. During each closest approach, called perijove, the spacecraft comes within 4,000 km of the cloud tops and the motion of the spacecraft becomes perturbed by the gravitational field of Jupiter. These small changes in the motion of the spacecraft are detected using the Juno Gravity Science Instrument by measuring the Doppler shift of the radio link between the Juno spacecraft and NASA’s Deep Space Network (DSN). During a majority of these closest approach passes, the 34-meter DSS-25 antenna transmits simultaneous X-band and Ka-band uplink to the spacecraft. Juno’s onboard X-band transponder and Ka-band translator phase-coherently return the signals back to Earth for reception at the same DSS-25 antenna. The precise frequency of these signals is measured by processing open-loop recordings of the signal. These measurements, characterized by ~5-10 micron/sec accuracies (after calibration of charged particle noise and Earth troposphere), have probed the gravity field of Jupiter to unprecedented precision, allowing for discoveries of Jupiter’s core size and depth of the zonal winds. Successful operations of the instrument during perijoves requires careful planning and coordination between DSN engineers, the Juno project, and the Juno science team. This work discusses the operations of the Juno Gravity Science Instrument after five years of prime mission operations. Lessons learned are documented to be applied to future missions and the Juno extended mission. Although the Juno extended mission formally started on August 1, 2021, on June 7, 2021, the trajectory was modified with a flyby of Ganymede, the third Galilean moon of Jupiter. Gravity and radio science investigations of Jupiter and its moons will continue to play a key role in Juno’s objectives during the extended mission.

On February 18, 2021, NASA’s Mars 2020 Rover “Perseverance” conducted the Entry, Descent, and Landing (EDL) sequence to land safely on the surface of Mars at Jezero Crater. Due to the criticality of the EDL sequence, redundant telecommunications strategies were utilized to observe the event. The rover transmitted an X-band (8.4 GHz) signal encoded with Multiple Frequency Shift Keying tones direct-to-Earth and a UHF (401.5 MHz) signal with 8 kbps encoded telemetry to orbiters, which relayed the signal back to Earth at X-band. NASA’s Deep Space Network complexes at Goldstone, California and Madrid, Spain received the direct-to-Earth X-band signal. Two of the largest steerable radio telescopes in the world, the 100-meter Green Bank Telescope in West Virginia and the Effelsberg 100-meter Radio Telescope in Germany also received the UHF carrier signal on Earth. During the EDL event, full spectrum recordings of the UHF and X-band signals were captured at these observatories using open-loop receivers. Real-time and post-processing signal analysis to determine power level, received frequency, and Doppler shift allowed determination of the spacecraft’s health and safety state during critical sequences, including event detection such as atmospheric entry, plasma blackouts, and parachute deployment. Simultaneous observations of the UHF and X-band radio links allow for redundancy in the event of a fault and greatly improve confidence in Doppler event detection.

We present results from the two radio occultations of the Cassini spacecraft by Titan in 2006, which probed mid-southern latitudes. Three of the ingress and egress soundings occurred within a narrow latitude range, 31.34 deg S near the surface, and the fourth at 52.8 deg S. Temperature - altitude profiles for all four occultation soundings are presented, and compared with the results of the Voyager 1 radio occultation (Lindal et al., 1983), the HASI instrument on the Huygens descent probe (Fulchignoni et al., 2005), and Cassini CIRS results (Flasar et al., 2005; Achterberg et al., 2008b). Sources of error in the retrieved temperature - altitude profiles are also discussed, and a major contribution is from spacecraft velocity errors in the reconstructed ephemeris. These can be reduced by using CIRS data at 300 km to make along-track adjustments of the spacecraft timing. The occultation soundings indicate that the temperatures just above the surface at 31-34 deg S are about 93 K, while that at 53 deg S is about 1 K colder. At the tropopause, the temperatures at the lower latitudes are all about 70 K, while the 53 deg S profile is again 1 K colder. The temperature lapse rate in the lowest 2 km for the two ingress (dawn) profiles at 31 and 33 deg S lie along a dry adiabat except within approximately 200m of the surface, where a small stable inversion occurs. This could be explained by turbulent mixing with low viscosity near the surface. The egress profile near 34 deg S shows a more complex structure in the lowest 2 km, while the egress profile at 53 deg S is more stable.