Search

We have developed arrays of nanomechanical systems (NEMS)by large-scaleintegration, comprising thousands of individual nanoresonators withdensities of up to 6 million NEMS per square centimeter. The individualNEMS devices are electrically coupled using a combined series-parallelconfiguration that is extremely robust with respect to lithographicaldefects and mechanical or electrostatic-discharge damage. Given thelarge number of connected nanoresonators, the arrays are able to handleextremely high input powers (>1 W per array, corresponding to <1mW per nanoresonator) without excessive heating or deterioration ofresonance response. We demonstrate the utility of integrated NEMSarrays as high-performance chemical vapor sensors, detecting a part-per-billionconcentration of a chemical warfare simulant within only a 2 s exposureperiod. [ABSTRACT FROM AUTHOR]

The Breakthrough Starshot Initiative aims to send a gram-scale probe to our nearest extrasolar neighbors using a laser-accelerated lightsail traveling at relativistic speeds. Thermal management is a key lightsail design objective because of the intense laser powers required but has generally been considered secondary to accelerative performance. Here, we demonstrate nanophotonic photonic crystal slab reflectors composed of 2H-phase molybdenum disulfide and crystalline silicon nitride, highlight the inverse relationship between the thermal band extinction coefficient and the lightsail's maximum temperature, and examine the trade-off between minimizing acceleration distance and setting realistic sail thermal limits, ultimately realizing a thermally endurable acceleration minimum distance of 23.3 Gm. We additionally demonstrate multiscale photonic structures featuring thermal-wavelength-scale Mie resonant geometries and characterize their broadband Mie resonance-driven emissivity enhancement and acceleration distance reduction. More broadly, our results highlight new possibilities for simultaneously controlling optical and thermal response over broad wavelength ranges in ultralight nanophotonic structures.

We argue that light sails with nanometer-scale thicknesses that are rapidly accelerated to relativistic velocities by lasers must be significantly curved in order to reduce their intrafilm mechanical stresses and avoid tears. Using an integrated opto-thermo-mechanical model, we show that the diameter and radius of curvature of a circular light sail should be comparable in magnitude, both on the order of a few meters, in optimal designs for gram-scale payloads. Moreover, we demonstrate that, when sufficient laser power is available, a sail's acceleration length decreases as its curvature increases. Our findings provide critical guidance for emerging light sail design programs, which herald a new era of interstellar space exploration to destinations such as the Oort cloud, the Alpha Centauri system, and beyond.

In atomic force microscopy, the cantilever probe is a critical component whose properties determine the resolution and speed at which images with nanoscale resolution can be obtained. Traditional cantilevers, which have moderate resonant frequencies and high quality factors, have relatively long response times and low bandwidths. In addition, cantilevers can be easily damaged by excessive deformation, and tips can be damaged by wear, requiring them to be replaced frequently. To address these issues, new cantilever probes that have hollow cross-sections and walls of nanoscale thicknesses made of alumina deposited by atomic layer deposition are introduced. It is demonstrated that the probes exhibit spring constants up to ≈100 times lower and bandwidths up to ≈50 times higher in air than their typical solid counterparts, allowing them to react to topography changes more quickly. Moreover, it is shown that the enhanced robustness of the hollow cantilevers enables them to withstand large bending displacements more readily and to be more resistant to tip wear., (© 2021 Wiley-VCH GmbH.)

Thermionic energy converters are solid-state heat engines that have the potential to produce electricity with efficiencies of over 30% and area-specific power densities of 100 Wcm -2 . Despite this prospect, no prototypes reported in the literature have achieved true efficiencies close to this target, and many of the most recent investigations report power densities on the order of mWcm -2 or less. These discrepancies stem in part from the low-temperature (<1300 K) test conditions used to evaluate these devices, the large vacuum gap distances (25-100 µm) employed by these devices, and material challenges related to these devices' electrodes. This review will argue that, for feasible electrode work functions available today, efficient performance requires generating output power densities of >1 Wcm -2 and employing emitter temperatures of 1300 K or higher. With this result in mind, this review provides an overview of historical and current design architectures and comments on their capacity to realize the efficiency and power potential of thermionic energy converters. Also emphasized is the importance of using standardized efficiency metrics to report thermionic energy converter performance data., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

We report light-driven levitation of macroscopic polymer films with nanostructured surface as candidates for long-duration near-space flight. We levitated centimeter-scale disks made of commercial 0.5-micron-thick mylar film coated with carbon nanotubes on one side. When illuminated with light intensity comparable to natural sunlight, the polymer disk heats up and interacts with incident gas molecules differently on the top and bottom sides, producing a net recoil force. We observed the levitation of 6-mm-diameter disks in a vacuum chamber at pressures between 10 and 30 Pa. Moreover, we controlled the flight of the disks using a shaped light field that optically trapped the levitating disks. Our experimentally validated theoretical model predicts that the lift forces can be many times the weight of the films, allowing payloads of up to 10 milligrams for sunlight-powered low-cost microflyers at altitudes of 50 to 100 km., (Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

Scaling down miniature rotorcraft and flapping-wing flyers to sub-centimeter dimensions is challenging due to complex electronics requirements, manufacturing limitations, and the increase in viscous damping at low Reynolds numbers. Photophoresis, or light-driven fluid flow, was previously used to levitate solid particles without any moving parts, but only with sizes of 1-20 µm. Here, architected metamaterial plates with 50 nm thickness are leveraged to realize photophoretic levitation at the millimeter to centimeter scales. Instead of creating lift through conventional rotors or wings, the nanocardboard plates levitate due to light-induced thermal transpiration through microchannels within the plates, enabled by their extremely low mass and thermal conductivity. At atmospheric pressure, the plates hover above a solid substrate at heights of ≈0.5 mm by creating an air cushion beneath the plate. Moreover, at reduced pressures (10-200 Pa), the increased speed of thermal transpiration through the plate's channels creates an air jet that enables mid-air levitation and allows the plates to carry small payloads heavier than the plates themselves. The macroscopic metamaterial structures demonstrate the potential of this new mechanism of flight to realize nanotechnology-enabled flying vehicles without any moving parts in the Earth's upper atmosphere and at the surface of other planets., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Low work function materials are essential for efficient thermionic energy converters (TECs), electronics, and electron emission devices. Much effort has been put into finding thermally stable material combinations that exhibit low work functions. Submonolayer coatings of alkali metals have proven to significantly reduce the work function; however, a work function less than 1 eV has not been reached. We report a record-low work function of 0.70 eV by inducing a surface photovoltage (SPV) in an n-type semiconductor with an alkali metal coating. Ultraviolet photoelectron spectroscopy indicates a work function of 1.06 eV for cesium/oxygen-activated GaAs consistent with density functional theory model predictions. By illuminating with a 532 nm laser we induce an additional shift down to 0.70 eV due to the SPV. Further, we apply the SPV to the collector of an experimental TEC and demonstrate an I - V curve shift consistent with the collector work function reduction. This method opens an avenue toward efficient TECs and next-generation electron emission devices., Competing Interests: The authors declare no competing financial interest., (Copyright © 2019 American Chemical Society.)

In thermionic energy converters, the absolute efficiency can be increased up to 40% if space-charge losses are eliminated by using a sub-10-µm gap between the electrodes. One practical way to achieve such small gaps over large device areas is to use a stiff and thermally insulating spacer between the two electrodes. We report on the design, fabrication and characterization of thin-film alumina-based spacers that provided robust 3-8 μm gaps between planar substrates and had effective thermal conductivities less than those of aerogels. The spacers were fabricated on silicon molds and, after release, could be manually transferred onto any substrate. In large-scale compression testing, they sustained compressive stresses of 0.4-4 MPa without fracture. Experimentally, the thermal conductance was 10-30 mWcm -2 K -1 and, surprisingly, independent of film thickness (100-800 nm) and spacer height. To explain this independence, we developed a model that includes the pressure-dependent conductance of locally distributed asperities and sparse contact points throughout the spacer structure, indicating that only 0.1-0.5% of the spacer-electrode interface was conducting heat. Our spacers show remarkable functionality over multiple length scales, providing insulating micrometer gaps over centimeter areas using nanoscale films. These innovations can be applied to other technologies requiring high thermal resistance in small spaces, such as thermophotovoltaic converters, insulation for spacecraft and cryogenic devices., Competing Interests: Conflict of interestJ.W.S. is the founder and K.V.H. is an employee of Spark Thermionics, Inc., which aims to commercialize thermionic energy converters. S.M.N., C.L., J.W.S., I.B. are inventors on a patent application that describes the use of similar spacers for thermionic energy conversion., (© The Author(s) 2019.)

Corrugated paper cardboard provides an everyday example of a lightweight, yet rigid, sandwich structure. Here we present nanocardboard, a monolithic plate mechanical metamaterial composed of nanometer-thickness (25-400 nm) face sheets that are connected by micrometer-height tubular webbing. We fabricate nanocardboard plates of up to 1 centimeter-square size, which exhibit an enhanced bending stiffness at ultralow mass of ~1 g m -2 . The nanoscale thickness allows the plates to completely recover their shape after sharp bending even when the radius of curvature is comparable to the plate height. Optimally chosen geometry enhances the bending stiffness and spring constant by more than four orders of magnitude in comparison to solid plates with the same mass, far exceeding the enhancement factors previously demonstrated at both the macroscale and nanoscale. Nanocardboard may find applications as a structural component for wings of microflyers or interstellar lightsails, scanning probe cantilevers, and other microscopic and macroscopic systems.

Many applications of graphene can benefit from the enhanced mechanical robustness of graphene-based components. We report how the stiffness of vertical graphene (VG) sheets is affected by the introduction of defects and fluorination, both separately and combined. The defects were created using a high-energy ion beam while fluorination was performed in a XeF 2 etching system. After ion bombardment alone, the average effective reduced modulus (E r ), equal to ∼4.9 MPa for the as-grown VG sheets, approximately doubled to ∼10.0 MPa, while fluorination alone almost quadrupled it to ∼18.4 MPa. The maximum average E r of ∼32.4 MPa was achieved by repeatedly applying fluorination and ion bombardment. This increase can be explained by the formation of covalent bonds between the VG sheets due to ion bombardment, as well as the conversion from sp 2 to sp 3 and increased corrugation due to fluorination.

We report the fabrication and characterization of graphene nanostructures with mechanical properties that are tuned by conformal deposition of alumina. Vertical graphene (VG) sheets, also called carbon nanowalls (CNWs), were grown on copper foil substrates using a radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) technique and conformally coated with different thicknesses of alumina (Al2O3) using atomic layer deposition (ALD). Nanoindentation was used to characterize the mechanical properties of pristine and alumina-coated VG sheets. Results show a significant increase in the effective Young's modulus of the VG sheets with increasing thickness of deposited alumina. Deposition of only a 5 nm thick alumina layer on the VG sheets nearly triples the effective Young's modulus of the VG structures. Both energy absorption and strain recovery were lower in VG sheets coated with alumina than in pure VG sheets (for the same peak force). This may be attributed to the increase in bending stiffness of the VG sheets and the creation of connections between the sheets after ALD deposition. These results demonstrate that the mechanical properties of VG sheets can be tuned over a wide range through conformal atomic layer deposition, facilitating the use of VG sheets in applications where specific mechanical properties are needed.

Unusual mechanical properties of mechanical metamaterials are determined by their carefully designed and tightly controlled geometry at the macro- or nanoscale. We introduce a class of nanoscale mechanical metamaterials created by forming continuous corrugated plates out of ultrathin films. Using a periodic three-dimensional architecture characteristic of mechanical metamaterials, we fabricate free-standing plates up to 2 cm in size out of aluminium oxide films as thin as 25 nm. The plates are formed by atomic layer deposition of ultrathin alumina films on a lithographically patterned silicon wafer, followed by complete removal of the silicon substrate. Unlike unpatterned ultrathin films, which tend to warp or even roll up because of residual stress gradients, our plate metamaterials can be engineered to be extremely flat. They weigh as little as 0.1 g cm(-2) and have the ability to 'pop-back' to their original shape without damage even after undergoing multiple sharp bends of more than 90°.

Low work function materials are critical for energy conversion and electron emission applications. Here, we demonstrate for the first time that an ultralow work function graphene is achieved by combining electrostatic gating with a Cs/O surface coating. A simple device is built from large-area monolayer graphene grown by chemical vapor deposition, transferred onto 20 nm HfO2 on Si, enabling high electric fields capacitive charge accumulation in the graphene. We first observed over 0.7 eV work function change due to electrostatic gating as measured by scanning Kelvin probe force microscopy and confirmed by conductivity measurements. The deposition of Cs/O further reduced the work function, as measured by photoemission in an ultrahigh vacuum environment, which reaches nearly 1 eV, the lowest reported to date for a conductive, nondiamond material.

We present a density functional theory-based method for calculating thermionic emission currents from a cathode into vacuum using a non-equilibrium Green's function approach. It does not require semi-classical approximations or crude simplifications of the electronic structure used in previous methods and thus provides quantitative predictions of thermionic emission for adsorbate-coated surfaces. The obtained results match well with experimental measurements of temperature-dependent current densities. Our approach can thus enable computational design of composite electrode materials.

We introduce a model for the effect of cesium adsorbates on the work function of transition metal surfaces. The model builds on the classical point-dipole equation by adding exponential terms that characterize the degree of orbital overlap between the 6s states of neighboring cesium adsorbates and its effect on the strength and orientation of electric dipoles along the adsorbate-substrate interface. The new model improves upon earlier models in terms of agreement with the work function-coverage curves obtained via first-principles calculations based on density functional theory. All the cesiated metal surfaces have optimal coverages between 0.6 and 0.8 monolayers, in accordance with experimental data. Of all the cesiated metal surfaces that we have considered, tungsten has the lowest minimum work function, also in accordance with experiments.

Solar-energy conversion usually takes one of two forms: the 'quantum' approach, which uses the large per-photon energy of solar radiation to excite electrons, as in photovoltaic cells, or the 'thermal' approach, which uses concentrated sunlight as a thermal-energy source to indirectly produce electricity using a heat engine. Here we present a new concept for solar electricity generation, photon-enhanced thermionic emission, which combines quantum and thermal mechanisms into a single physical process. The device is based on thermionic emission of photoexcited electrons from a semiconductor cathode at high temperature. Temperature-dependent photoemission-yield measurements from GaN show strong evidence for photon-enhanced thermionic emission, and calculated efficiencies for idealized devices can exceed the theoretical limits of single-junction photovoltaic cells. The proposed solar converter would operate at temperatures exceeding 200 degrees C, enabling its waste heat to be used to power a secondary thermal engine, boosting theoretical combined conversion efficiencies above 50%.

We propose a magnetomechanical device that exhibits many properties of a laser. The device is formed by a nanocantilever and dynamically polarized paramagnetic nuclei of a solid sample in a strong external magnetic field. The corresponding quantum oscillator and effective two-level systems are coupled by the magnetostatic dipole-dipole interaction between a permanent magnet on the cantilever tip and the magnetic moments of the spins, so that the entire system is effectively described by the Jaynes-Cummings model. We consider the possibility of observing transient and cw lasing in this system, and show how these processes can be used to improve the sensitivity of magnetic resonance force microscopy.