Search

• Affordable and adaptable VIP based internal and external retrofitting solutions. • Implementation of VIP based integral retrofitting solutions in two tertiary buildings. • Space heating energy saving analysis before and after VIP based retrofit. • Envelope heat loss coefficient reduction analysis before and after retrofitting. Vacuum insulation panels (VIPs) represent a huge opportunity to achieve nearly zero energy buildings, especially in the retrofitting of existing buildings. VIPs can be applied in conjunction with façade cladding elements, considerably reducing the heat losses or gains from the building by means of very slim wall construction systems or retrofit solutions. However, the fact that VIPs cannot be cut on-site, can be easily damaged during their handling, installation and use and have an envelope that can cause thermal bridging in the junction between panels or when combined with other materials, has hindered their penetration in the construction market. This paper presents two innovative façade retrofitting solutions, a rear ventilated façade and a stud mounted internal solution, that have tackled all these issues and provide thermal transmittances of 0.28 and 0.14 W/m2 K in relatively slim insulation systems of 10 cm widths. Solutions have been installed on the entire façade of two existing buildings located in Bilbao (Spain) and Malmö (Sweden) subjected to an integral rehabilitation process, covering 2100 m2. Buildings energy use have been monitored before and after the renovation, showing energy cuts of around 35% from pre-intervention status. This paper presents the lessons learnt during the design and installation process of the vacuum insulation integrating solutions in the façade of two existing buildings and the thermal performance results achieved after their retrofitting. [ABSTRACT FROM AUTHOR]