Search

Ballistocardiography (BCG) is the measurement of body movement by forces associated with heart contraction that can be used for monitoring cardiac activity. It has already been measured by force sensor and accelerometer. In this research, we developed a capacitive wristband that provides a method for single point, continuous BCG measurement, which has the potential to become a new type of sensor for wearable health care. The aim of this paper is to validate that the signal detected by capacitive electrodes is actually the BCG signal. Signals from four healthy subjects were acquired by a capacitive wristband together with Electrocardiogram (ECG). The capacitive signal was validated by both morphology matching analysis and wave occurrence time matching analysis to show that it is indeed BCG signal. JJ intervals extracted from BCG were shown to have potential to be surrogate of ECG RR series in heart rate variability analysis.

Noninvasive blood pressure (BP) measurement is an important tool for managing hypertension and cardiovascular disease. However, automated noninvasive BP measurement devices, which are usually based on the oscillometric method, do not always provide accurate estimation of BP. It has been found that change in arterial stiffness (AS) is an underlying mechanism of disagreement between an oscillometric BP monitor and a sphygmomanometer. This problem is addressed by incorporating parameters related to AS in the algorithm for BP measurement. Pulse transit time (PTT) is first used to estimate AS parameters, which are fixed into a model of the oscillometric envelope. This model can then be used to perform curve fitting to the measured signal using only four parameters: systolic BP, diastolic BP, mean BP, and lumen area at zero transmural pressure. The proposed technique is independent of the experimentally determined characteristic ratios that are commonly used in existing oscillometric methods. The accuracy of the proposed technique was evaluated by comparing with the same model without incorporation of AS, and with reference BP device measurements. The new method achieved standard deviation of error less than 8 mmHg and mean error less than 5 mmHg. The results show consistency with ANSI/AAMI SP-10 standard for noninvasive BP measurement techniques.

A variety of oscillometric algorithms have been recently proposed in the literature for estimation of blood pressure (BP). However, these algorithms possess specific strengths and weaknesses that should be taken into account before selecting the most appropriate one. In this paper, we propose a fusion method to exploit the advantages of the oscillometric algorithms and circumvent their limitations. The proposed fusion method is based on the computation of the weighted arithmetic mean of the oscillometric algorithms estimates, and the weights are obtained using a Bayesian approach by minimizing the mean square error. The proposed approach is used to fuse four different oscillometric blood pressure estimation algorithms. The performance of the proposed method is evaluated on a pilot dataset of 150 oscillometric recordings from 10 subjects. It is found that the mean error and standard deviation of error are reduced relative to the individual estimation algorithms by up to 7 mmHg and 3 mmHg in estimation of systolic pressure, respectively, and by up to 2 mmHg and 3 mmHg in estimation of diastolic pressure, respectively., (Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.)

Tissue resistance changes upon application of DC current. We posit that in a similar fashion, that scalp and skull resistances during trancranial direct current stimulation (tDCS) are variable, resulting in changes to intracranial dose. Transcranial magnetic stimulation (TMS), electoencephelogram (EEG), functional magnetic resonance imaging (fMRI), proton magnetic resonance spectroscopy ((1)H MRS) and functional near infrared spectroscopy (fNIRS) are technologies used to measure individual neural response to tDCS. These technologies are complex and may not be directly correlated to intracranial dose. We therefore present a bioimpedance spectroscopy method of measuring changes to the intracranial dose in vivo. Scalp resistance changes are measured during tDCS. Current flow through the scalp is calculated as the ratio of voltage measured on the scalp and scalp resistance. Variation of intracranial current is indirectly calculated from changes in the current shunted through the scalp. We thus demonstrate a novel methodology of on-line monitoring of scalp resistance and current as an objective feedback of estimated individual tDCS dose.

Presently 90 - 95% of children in the US wear disposable diapers before completing their toilet training at average age of 30 months. The diaper absorbs urine and liquid component from feces contaminated with excreted toxicants. In this initial study, we posit that the long contact between the diaper and the skin leads to increased dermal reabsorption of excreted body toxicants, mainly heavy metals, which are statistically associated with autism and neurodevelopmental disorder. We developed a mathematical model to analyse the increase of the level of toxicants due to dermal reabsorption after excretion. This simple kinetic model gives us the average reabsorbtion factor in the range of 1.6 to 5. The limitation of this work is that only mathematical model has been considered and it has not been verified experimentally.

In several applications of bioimpedance spectroscopy, the measured spectrum is parameterized by being fitted into the Cole equation. However, the extracted Cole parameters seem to be inconsistent from one measurement session to another, which leads to a high standard deviation of extracted parameters. This inconsistency is modeled with a source of random variations added to the voltage measurement carried out in the time domain. These random variations may originate from biological variations that are irrelevant to the evidence that we are investigating. Yet, they affect the voltage measured by using a bioimpedance device based on which magnitude and phase of impedance are calculated.By means of simulated data, we showed that Cole parameters are highly affected by this type of variation. We further showed that singular value decomposition (SVD) is an effective tool for parameterizing bioimpedance measurements, which results in more consistent parameters than Cole parameters. We propose to apply SVD as a preprocessing method to reconstruct denoised bioimpedance measurements. In order to evaluate the method, we calculated the relative difference between parameters extracted from noisy and clean simulated bioimpedance spectra. Both mean and standard deviation of this relative difference are shown to effectively decrease when Cole parameters are extracted from preprocessed data in comparison to being extracted from raw measurements.We evaluated the performance of the proposed method in distinguishing three arm positions, for a set of experiments including eight subjects. It is shown that Cole parameters of different positions are not distinguishable when extracted from raw measurements. However, one arm position can be distinguished based on SVD scores. Moreover, all three positions are shown to be distinguished by two parameters, R0/R∞ and Fc, when Cole parameters are extracted from preprocessed measurements. These results suggest that SVD could be considered as an effective technique for overcoming the variability of bio-impedance spectroscopy measurements.

Background: Transcranial direct current simulation (tDCS) is a non-invasive neuromodulation technique that has become increasingly popular as a potential therapeutic method for a variety of brain disorders. Since the treatment outcome may depend on the current density delivered to the brain cortical region, a significant challenge is to control the current dose reaching the cortical region., Objective and Methods: This study aims to investigate the effect of temperature on current delivery to the brain. We devised a method for modulating the amount of current delivered to the brain by changing the temperature of the scalp. We developed analytical and numerical models that describe the relationship between temperature and electrical properties of the scalp based on the following mechanisms: ion mobility and blood perfusion in scalp., Results and Conclusions: The current delivery to brain was investigated by changing the temperature between two electrodes that are attached to the surface of the scalp, within a tolerable physiological range. Results show that by increasing the temperature between two electrodes, a higher portion of current is shunted via the scalp and the proportion of the current that penetrates the scalp and skull into brain is decreased. On the other hand, cooling the area between two electrodes on the scalp increases the current delivery to the cortical region of the brain. Our results show that cooling the scalp during tDCS can be considered as a possible way to effectively control the current delivery to the brain and increase the efficacy of tDCS., (Copyright © 2015 Elsevier Inc. All rights reserved.)

The use of automated blood pressure (BP) monitoring is growing as it does not require much expertise and can be performed by patients several times a day at home. Oscillometry is one of the most common measurement methods used in automated BP monitors. A review of the literature shows that a large variety of oscillometric algorithms have been developed for accurate estimation of BP but these algorithms are scattered in many different publications or patents. Moreover, considering that oscillometric devices dominate the home BP monitoring market, little effort has been made to survey the underlying algorithms that are used to estimate BP. In this review, a comprehensive survey of the existing oscillometric BP estimation algorithms is presented. The survey covers a broad spectrum of algorithms including the conventional maximum amplitude and derivative oscillometry as well as the recently proposed learning algorithms, model-based algorithms, and algorithms that are based on analysis of pulse morphology and pulse transit time. The aim is to classify the diverse underlying algorithms, describe each algorithm briefly, and discuss their advantages and disadvantages. This paper will also review the artifact removal techniques in oscillometry and the current standards for the automated BP monitors.

Background: To evaluate the impact of sampling rate on the predictive capability of continuous fetal heart rate (FHR) variability (fHRV) monitoring for detecting fetal acidemia during labor, we tested the performance of the root mean square of successive differences (RMSSD) in R-R intervals from the ECG when acquired with the sampling rate of 4 Hz currently available in FHR monitors, in comparison to the gold standard of 1000 Hz., Methods: Near-term ovine fetuses (N = 9) were chronically prepared with precordial electrodes for recording ECG, vascular catheters for blood sampling, and an umbilical cord occluder. For 1 min every 2.5 min, animals underwent mild partial umbilical cord occlusions (UCO) × 1 h, moderate partial UCO × 1 h, then complete UCO × 2 h, or until arterial pH reached <7.00. Arterial blood samples were drawn at baseline and every 20 min during the UCO series. RMSSD was calculated continuously in 5 min windows using an automated, standardized system (CIMVA.com). RESULTS are presented as mean ± SEM with significance assumed for p < 0.05., Results: Repetitive UCO resulted in pH decreasing from 7.35 ± 0.01 to 7.00 ± 0.03. In all nine animals, RMSSD increased from 16.7 ± 1.0 ms at baseline to 44.4 ± 2.3 ms, 70 ± 15 min prior to reaching the pH nadir when sampled at 1000 Hz. When sampled at 4 Hz, RMSSD at baseline measured 36.1 ± 6.0 ms and showed no significant increase during the UCO series until the pH nadir was reached. Consequently, early detection of severe hypoxic-acidemia would have been missed in all fetuses., Conclusion: RMSSD as a measure of fHRV when calculated from FHR sampled at 1000 Hz allowed for the early detection of worsening hypoxic-acidemia in each fetus. However, when calculated at the low sampling rate of 4 Hz used clinically, RMSSD remained unchanged until terminally when the nadir pH was reached. For early detection of fetal acidemia during labor, more sensitive means of acquiring FHR are therefore recommended than currently deployed, e.g., trans-abdominal fetal ECG.

Human detection is an integral component of civilian and military rescue operations, military surveillance and combat operations. Human detection can be achieved through monitoring of vital signs. In this article, a mathematical model of human breathing reflected signal received in PN-UWB radar is proposed. Unlike earlier published works, both chest and abdomen movements are considered for modeling the radar return signal along with the contributions of fundamental breathing frequency and its harmonics. Analyses of recorded reflected signals from three subjects in different postures and at different ranges from the radar indicate that ratios of the amplitudes of the harmonics contain information about posture and posture change.

Purpose: The aim of the study was to evaluate the feasibility of continuous heart and respiratory rate variability (HRV and RRV, respectively) monitoring in critically ill patients derived from electrocardiogram (ECG) and end-tidal capnography (etCO(2)) waveforms., Methods: Thirty-four patients (age, 56.5 ± 15.9 years; Acute Physiology and Chronic Health Evaluation II score, 22.8 ± 6.7) underwent continuous recording of ECG and etCO(2) waveforms from intensive care unit admission and intubation to discharge or maximum of 14 days. Overlapping 5-minute windows were analyzed with a wide range of variability measures (time, frequency, entropy, and scale-invariant and nonlinear domains). Waveform data quality, presence of disconnections and arrhythmias, quality of beat and breath detection, and subsequent variability computations were evaluated., Results: Patients were enrolled for 11.0 ± 3.6 days. The proportion of missing waveform data among all patients was (median [interquartile range, maximum]) 2.9% (1.3%-9.7%, 36.4%) for ECG and 3.1% (1.1%-11.4%, 84.5%) for etCO(2). Heart rate variability data loss (ie, proportion of windows removed) was 1.3% (1.0%-2.1%, 5.9%) due to disconnection, 0.6% (0.1%-3.9%, 39.5%) due to atrial fibrillation, and 6.6% (1.4%-17.9%, 89.0%) due to data cleaning. Respiratory rate variability data loss was 7.3% (2.9%-11.6%, 47.7%) due to disconnection (or apnea) and 5.5% (2.9%-8.4%, 56.4%) due to cleaning. Continuous individualized multiorgan variability analysis processing resulted in HRV and RRV computations for 81.2% ± 25.0% and 87.5% ± 11.9% of available ECG and etCO(2) waveform data, respectively., Conclusions: The quality of continuously recorded ECG and etCO(2) waveforms in critically ill patients is adequate for subsequent continuous variability monitoring in this pilot study. The clinical utility of continuous variability analysis merits further investigation., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Accurate automatic noninvasive assessment of blood pressure (BP) presents a challenge due to conditions like arrhythmias, obesity, and postural changes that tend to obfuscate arterial amplitude pulsations sensed by the cuff. Researchers tried to overcome this challenge by analyzing oscillometric pulses with the aid of a higher fidelity signal-the electrocardiogram (ECG). Moreover, pulse transit time (PTT) was employed to provide an additional method for BP estimation. However, these methods were not fully developed, suitably integrated, or tested. To address these issues, we present a novel method whereby ECG-assisted oscillometric and PTT (measured between ECG R-peaks and maximum slope of arterial pulse peaks) analyses are seamlessly integrated into the oscillometric BP measurement paradigm. The method bolsters oscillometric analysis (amplitude modulation) with more reliable ECG R-peaks provides a complementary measure with PTT analysis (temporal modulation) and fuses this information for robust BP estimation. We have integrated this technology into a prototype that comprises a BP cuff with an embedded conductive fabric ECG electrode, associated hardware, and algorithms. A pilot study has been undertaken on ten healthy subjects (150 recordings) to validate the performance of our prototype against United States Food and Drug Administration approved Omron oscillometric monitor (HEM-790IT). Our prototype achieves mean absolute difference of less than 5 mmHg and grade A as per the British Hypertension Society protocol for estimating BP, with the reference Omron monitor.

Background: Early diagnosis of sepsis enables timely resuscitation and antibiotics and prevents subsequent morbidity and mortality. Clinical approaches relying on point-in-time analysis of vital signs or lab values are often insensitive, non-specific and late diagnostic markers of sepsis. Exploring otherwise hidden information within intervals-in-time, heart rate variability (HRV) has been documented to be both altered in the presence of sepsis, and correlated with its severity. We hypothesized that by continuously tracking individual patient HRV over time in patients as they develop sepsis, we would demonstrate reduced HRV in association with the onset of sepsis., Methodology/principal Findings: We monitored heart rate continuously in adult bone marrow transplant (BMT) patients (n = 21) beginning a day before their BMT and continuing until recovery or withdrawal (12+/-4 days). We characterized HRV continuously over time with a panel of time, frequency, complexity, and scale-invariant domain techniques. We defined baseline HRV as mean variability for the first 24 h of monitoring and studied individual and population average percentage change (from baseline) over time in diverse HRV metrics, in comparison with the time of clinical diagnosis and treatment of sepsis (defined as systemic inflammatory response syndrome along with clinically suspected infection requiring treatment). Of the 21 patients enrolled, 4 patients withdrew, leaving 17 patients who completed the study. Fourteen patients developed sepsis requiring antibiotic therapy, whereas 3 did not. On average, for 12 out of 14 infected patients, a significant (25%) reduction prior to the clinical diagnosis and treatment of sepsis was observed in standard deviation, root mean square successive difference, sample and multiscale entropy, fast Fourier transform, detrended fluctuation analysis, and wavelet variability metrics. For infected patients (n = 14), wavelet HRV demonstrated a 25% drop from baseline 35 h prior to sepsis on average. For 3 out of 3 non-infected patients, all measures, except root mean square successive difference and entropy, showed no significant reduction. Significant correlation was present amongst these HRV metrics for the entire population., Conclusions/significance: Continuous HRV monitoring is feasible in ambulatory patients, demonstrates significant HRV alteration in individual patients in association with, and prior to clinical diagnosis and treatment of sepsis, and merits further investigation as a means of providing early warning of sepsis.

The effect of static electricity on the deposition of radon daughters onto charged surfaces is determined by a combined experimental and theoretical analysis. Experiments with charged surfaces exposed to the air in a normal working environment are analysed to determine an empirical radon daughter deposition rate. This factor is utilized to estimate the daughter deposition on a human head which is exposed to similar conditions of air quality and static charging. The results indicate that typical levels of static electricity can enhance the deposition of radon daughters by orders of magnitude compared with the uncharged condition. The corresponding yearly alpha dose equivalents to the basal skin layer and to the eye exceed recommended limits. Beside having an important impact from the public health perspective, these results suggest that the obscure and contradictory correlations found between radon concentrations and adverse health effects may arise from a failure to account for the effects of static electricity.