Search

OBJECTIVES Lacerations comprise 5.6-33.6% of skiing/snowboarding related injuries. This study aimed to investigate the mechanism of injury and the location of these lacerations and propose preventive measures. METHODS After our state ethics committee approval, we retrospectively reviewed the medical records and surgical protocols of 46 patients (mean age (±SD) 34.6 (±15.3); 71.4% men) treated for severe skiing/snowboarding lacerations at our level-1 trauma centre between 2016 and 2021. Patients were asked to answer a questionnaire on their skiing experience, equipment used and the circumstances of the accident. RESULTS Lacerations around the hip, thigh, and knee accounted for 94%. The latter was the most common location (45%). Although 91.3% of patients wore appropriate clothing and full standard protection equipment, it did not offer any extra-resistance against skiing/snowboarding's edges. Skiers were more affected (91.3%) than snowboarders (8.7%). The most common mechanism of injury was inadvertent release of the bindings (52.2%), followed by insufficient ski level for the slope (21.7%) and collisions (17.4%). Long-term trends demonstrated an increasing incidence. CONCLUSION Identification of body areas at risk and the mechanisms of injury were the most significant findings of this work. These data encourage the development of specific injury prevention programs as the occurrence of these lesions tended to increase over the last few years. To reduce their incidence, we propose skiers to have their bindings regularly adjusted and manufacturers to develop cut-resistant skiwear. LEVEL OF EVIDENCE IV.

Hintergrund Begleitverletzungen können in bis zu 90 % der Fälle nach erstmaliger Schulterluxation auftreten. Auch wenn sie nicht immer einen Einfluss auf die Therapiewahl haben, so ist eine sorgfältige Diagnostik entscheidend. Einteilung In der Akutsituation ist eine konventionelle Bildgebung in mindestens 2 Ebenen (a.-p./Neer/evtl. axial) vor und nach Reposition zwingend. Luxationsfrakturen dürfen nicht übersehen bzw. durch das Manöver der geschlossenen Reposition sekundär disloziert werden. Bestehen ossäre glenoidale, humerale oder kombinierte Verletzungen, sollten sie gemäß Stabilitätskriterien versorgt werden. Dies kann umgehend, nach manifester Dezentrierung oder Instabilität entweder mittels Osteosythese oder als glenohumerale Stabilisation im Verlauf erfolgen. Bei einer Instabilität ist prinzipiell zur Bilanzierung einer ossären Ursache das Arthro-CT die Untersuchung der Wahl, welche auch eine Beurteilung der kapsulolabroligamentären Verletzung sowie einer traumatischen Rotatorenmanschettenläsion ermöglicht. Letztere ist jedoch besser mittels Arthro-MRT zu beurteilen. Diskussion Eine signifikante frische, meist größere oder massive, Rotatorenmanschettenläsion sollte rasch operativ angegangen werden. Medial reichende „off the track“ Hill-Sachs-Läsionen können mittels einer Hill-Sachs-Remplissage oder, wie auch glenoidale Defekte, mittels einer Kochenaugmentation versorgt werden. Langzeitresultate des Latarjet-Verfahrens zeigen 25 Jahre nach dem Eingriff die niedrigste Reluxationsrate < 4 %, eine gute Außenrotation, eine sehr hohe Patientenzufriedenheit und degenerative Veränderungen, welche vergleichbar mit der natürlichen Entwicklung nach erstmaliger Schulterluxation ohne Rezidiv sind., Background Almost 90 % of first time shoulder dislocations are associated with other injuries involving the glenohumeral joint complex. It is important to make an accurate diagnosis even if this does not always influence the choice of an appropriate therapy. Content In the acute setting it is imperative that X-ray imaging is performed before and after repositioning in at least two planes, i.e. anteroposterior (AP), Neer and if possible axial views. Fracture dislocations must not be overlooked as repositioning maneuvers can lead to secondary displacement or complete displacement of a fracture. If there is any evidence of an unstable glenoid fracture, humeral fracture or combined osseous lesions, they should be immediately treated with open reduction and internal fixation. Patients with an incongruent glenohumeral articulation or who suffer from recurrent instability require a surgical intervention. In recurrent shoulder instability with evidence of osseous lesions arthrography computed tomography (arthro-CT) is the most valuable investigation. Injuries to the capsulolabral complex and rotator cuff can be diagnosed with this modality but arthrography magnetic resonance imaging (arthro-MRI) can provide greater details with respect to rotator cuff lesions. Discussion Acute large or massive rotator cuff lesions require semi-urgent repair. Off-track Hill-Sachs lesions with medial extension should be addressed with a remplissage or bone grafting. The long-term results of a Latarjet procedure at 25-year follow-up showed a very low redislocation rate (< 4 %), good external rotation, very high patient satisfaction and a rate of degenerative changes comparable with the natural development of first time shoulder dislocations without recurrent instability.

Background: Acromioclavicular joint (ACJ) injuries are common. Despite this, it remains unclear how best to assess, classify, and manage these cases. A simple, reliable, valid, and accurate radiographic parameter to measure ACJ displacement would allow improved consistency of diagnosis and subsequent treatment pathways. Purpose: To evaluate “the circles measurement” and associated “ABC classification” as a tool for assessing ACJ displacement and injury classification. Study Design: Descriptive laboratory study. Methods: The circles measurement is taken from a lateral Alexander radiograph of the shoulder. The measurement is the center-to-center distance between 2 circles drawn to define the lateral extent of the clavicle and the anteromedial extent of the acromion; it is independent of the displacement plane, judging total ACJ displacement in any direction rather than trying to quantify vertical and/or horizontal displacement. When utilized clinically, the circles measurement is a single measurement calculated as the difference between values recorded for the injured and uninjured sides. Validation of the circles measurement was performed using lateral Alexander radiographs (including ±20° projection error in all planes) and computed tomography of standardized ACJ injury simulations. We assessed inter- and intrarater reliability, convergent validity, and discriminant validity of the circles measurement and subsequently generated a classification of ACJ injury based on displacement. Results: Reliability and validity of the circles measurement was excellent throughout. Interrater reliability (ICC [intraclass correlation coefficient] [2,1], 95% CI; n = 78; 4 observers) was 0.976 (0.964-0.985). Intrarater reliability (ICC [2,1]; 95% CI; n = 78; 2 measures) was 0.998 (0.996-0.998). Convergent validity (Pearson correlation coefficient, r) was 0.970 for ideal radiographs and 0.889 with ±20° projection error in all planes. Discriminant validity, with 1-way analysis of variance, showed a P value of 2) of 0.960, with the ability to distinguish between the previously defined stable (Rockwood IIIA) and unstable (Rockwood IIIB) injuries. The results permitted objective, statistically sound parameters for the proposed ABC classification system. Conclusion: The circles measurement is a simple, reliable, valid, accurate, and resilient parameter for assessing ACJ displacement and can be used in conjunction with the proposed ABC classification to define ACJ injuries more accurately and objectively than previously described. Clinical Relevance: This novel parameter has the potential to standardize the initial assessment and possibly the subsequent clinical management of ACJ injuries, in addition to providing a standardized measure for future research.

Degenerative rotator cuff tear is a frequent and multifactorial pathology. The role of bone morphology of the greater tuberosity and lateral acromion has been validated, and can be measured with two plain radiographic markers on true anteroposterior views: the greater tuberosity angle (GTA) and the critical shoulder angle (CSA). However, the interdependence of both markers remains unknown, as well as their relationship with the level of professional and sports activities involving the shoulder. The aim of this prospective comparative study was to describe the correlation between the GTA and CSA in patients with degenerative rotator cuff tears.GTA and CSA are independent factors from one another and from demographic factors, such as age, dominance, sports, or professional activities.All patients presenting to a shoulder specialized clinic were assigned to two groups. The first consisted of patients with a symptomatic degenerative rotator cuff tear visible on MRI and the control group consisted of patients with any other shoulder complaints and no history or visible imaging of any rotator cuff lesion.There were 51 shoulders in 49 patients in the rotator cuff tear group (RCT) and 53 shoulders in 50 patients in the control group. Patient demographics were similar in both groups. Mean GTA was 72.1°±3.7 (71.0-73.1) in the RCT group and 64.0°±3.3 (63.1-64.9) in the control group (p0.001). Mean CSA was 36.7°±3.7 (35.7-37.8) in the RCT group, and 32.1°±3.7 (31.1-33.1) in the control group (p0.001). A summation of GTA and CSA values over 103° increased the odds of having a rotator cuff tear by 97-fold (p0.001). There was no correlation between GTA and CSA, nor between GTA or CSA and age, sex, tear size, or dominance. Patients with different levels of professional and sports activities did not have significantly different GTA or CSA values.GTA and CSA are independent radiologic markers that can reliably predict the presence of a degenerative rotator cuff tear. A sum of both values over 103° increases the odds of having a rotator cuff tear by 97-fold. These markers are not correlated with patient demographic or environmental factors, suggesting that the variability of the native acromion and greater tuberosity morphology may be individual risk factors for rotator cuff tear.II; diagnostic study.

Background Cutibacterium acnes is one of the major pathogens responsible for infection after shoulder surgery. Surgical dissection of the dermis may expose C acnes from sebum-producing hair follicles. Because of contact with the surgeon's gloves and instruments, further spread occurs throughout the surgical field. The purpose of this study was to determine whether subcutaneous tissue disinfection could reduce the C acnes culture rate in primary open shoulder surgery. Methods All patients eligible for primary open shoulder surgery by a deltopectoral approach were prospectively enrolled in our 2-arm, randomized, single-blinded clinical trial. In all patients, a skin swab of the operative field was taken prior to standard surgical skin preparation. After exposure of the deltoid fascia, the disinfection group received an additional preparation of the subcutaneous layer with povidone-iodine solution. Once the proximal humerus was completely exposed, 5 swabs from different sites were taken for microbiological examination according to a strict specimen collection protocol. All cultures were incubated in aerobic and anaerobic conditions for 14 days. Results Between February and December 2019, 108 patients were enrolled in the 2 groups: treatment (n = 70) and control (n = 38). The 2 groups did not show any significant difference in terms of sex, age, body mass index, or occurrence of diabetes. The subcutaneous disinfection protocol significantly reduced the positive culture rate of the operating field for all germs combined (P = .036) and specifically for C acnes (P = .013). The reduction of positive swabs for C acnes was significant for the surgeon's gloves (P = .041), as well as the retractors (P = .007). Conclusion Disinfection of the subcutaneous tissue significantly reduced the C acnes culture rate during primary open shoulder surgery. We highly recommend this simple step as an adjunct to the current surgical practice to limit iatrogenic contamination of the surgical field. Future studies may observe a reduction in postoperative shoulder infection owing to this practice.

Background The Critical Shoulder Angle was introduced as a combined radiographic surrogate parameter reflecting the influence of the morphological characteristics of the scapula on the development of degenerative shoulder disease such as rotator cuff tears and osteoarthritis. Although, glenoid inclination and lateral extension of the acromion were studied in biomechanical models separately, no investigation included all three individual parameters that determine the Critical Shoulder Angle: glenoid inclination, acromial coverage and acromial height in one cadaveric study protocol. Methods Three proximal humerus cadavers were attached to a robotic shoulder simulator which allowed for independent change of either lateral acromial coverage, glenoid inclination or acromial height. Combined dynamic scapula-thoracic and glenohumeral abduction up to 60° with different Critical Shoulder Angle configurations was performed and muscle forces as well as joint reaction forces were recorded. Findings All three components had an effect on either muscle forces and or joint reaction forces. While glenoid inclination showed the highest impact on joint stability with increasing upward-tilting causing cranial subluxation, changing of the lateral acromial coverage or acromial height had less influence on stability but showed significant alteration of joint reaction forces. Interpretation All three components of the Critical Shoulder Angle, glenoid inclination, lateral acromial extension and acromial height showed independent biomechanical effects when changed isolated. However, glenoid inclination seems to have the largest impact regarding joint stability.

Muscle fat content of the rotator cuff increases after a tear. In the healthy rotator cuff, the influence of age, body mass index (BMI) and critical shoulder angle (CSA) on muscle fat content is unknown. The primary aim was to correlate muscle fat content with age, BMI and CSA. The secondary aims were (1) to correlate muscle fat content in the entire muscle and slice Y (most lateral sagittal slice with scapular spine) and (2) assessed the reliability for CSA measurement in MRI.In 26 healthy shoulders (17 subjects), aged 40-65 years, BMI 20-35 kg/mInfraspinatus muscle fat content correlates moderately with age (r = 0.553; p = 0.003) and BMI (r = 0.517; p = 0.007). Supraspinatus muscle fat content does not correlate with age (r = 0.363, p = 0.069) and BMI (r = 0.342, p = 0.087). No correlation between CSA and muscle fat content was found. Muscle fat content measurement in the entire muscle correlates strongly with measurement in slice Y (intraclass correlation coefficient supraspinatus muscle: 0.757; infraspinatus muscle: 0.794). CSA intermethod analysis between radiography and MR images shows very high reliability (intraclass correlation coefficient 0.9) and no systematical deviation in Bland-Altman analysis.Muscle fat content in the healthy infraspinatus muscle does correlate with age and BMI, but not with the CSA. Muscle fat content measurement in the rotator cuff using Dixon MRI showed a high reliability between slice Y and the entire muscle.III.

ObjectivesMore than 20 people die each year in snow avalanches in Switzerland. Previous studies have primarily described these victims, but were not population based. We investigated sociodemographic factors for avalanche mortality between 1995 and 2014 in the entire Swiss resident population.Design and methodsWithin the Swiss National Cohort we ascertained avalanche deaths by anonymous data linkage with the avalanche accident database at the Swiss WSL Institute of Snow and Avalanche Research SLF. We calculated incidence rates, by dividing the number of deaths from avalanches by the number of person-years, and hazard ratios (HRs) for sociodemographic and economic characteristics using Cox proportional hazard models.ResultsThe data linkage yielded 250 deaths from avalanche within the SNC population for the 20 years 1995 to 2014. The median distance between the place of residence and the place of the event (avalanche) was 61.1 km. Male gender, younger age (15-45 years), Swiss nationality, living in the Alpine regions, higher education, living in the highest socioeconomic quintile of neighbourhoods, being single, and living in a household with one or more children were associated with higher avalanche mortality rates. Furthermore, for younger persons (ConclusionOver a 20-year period in Switzerland, higher rates of dying in an avalanche were observed in men, in younger age groups, and persons with tertiary education, living in the highest socioeconomic quintile of neighbourhoods, and living in an Alpine region. For younger persons (

Introduction Un Critical Shoulder Angle (CSA) anormal a ete identifie comme un element participant a la survenue de pathologies comme les lesions de la coiffe des rotateurs (CSA important) ou l’omarthrose (CSA faible) dans de multiples etudes cliniques. Les hypotheses biomecaniques pour expliquer ces phenomenes sont qu’une modification du CSA entraine un changement des forces en cisaillement et en compression au niveau gleno-humeral. L’objectif de cette etude etait d’evaluer les consequences biomecaniques d’une modification du CSA en utilisant un simulateur informatique de l’articulation de l’epaule valide. Materiels et methodes Le modele musculo-squelettique tridimensionnel a dynamique inversee du membre superieur UKNSM (United Kingdom National Shoulder Model) a ete utilise. Trois conditions de CSA ont ete testees (CSA normal a 33°, CSA important a 38° et CSA diminue a 28°) lors de 2 types de mouvements (abduction et flexion de 30° a 120° d’amplitude) et a 2 vitesses differentes (lente ou rapide). Les parametres suivants ont ete analyse : – la magnitude (maximum et somme sur l’ensemble de l’amplitude) des forces de cisaillement gleno-humerales (SF) correspondant aux forces infero-superieur (IS) et antero-posterieur (AP) exercees dans le plan sagittal lors des mouvements, – la magnitude (maximum et somme sur l’ensemble de l’amplitude) des forces de compression gleno-humerales (CF) correspondant aux forces latero-mediales (LM) exercees dans le plan frontal lors des mouvements. Resultats Une augmentation du CSA entraine une augmentation des forces de cisaillement notamment de la composante infero-superieure (p > 0,05). Une reduction du CSA a pour consequence une augmentation des forces de compression (latero-mediales) gleno-humerale (p > 0,01). Le type de mouvement ou la vitesse n’avait pas d’influence significative sur ces resultats. Discussion La simulation informatique est la technique la plus aboutie et validee pour reproduire et analyser la biomecanique d’une articulation. Avec un CSA augmente, le vecteur des forces du deltoide est plus vertical, entrainant plus de forces en cisaillement, necessitant donc une augmentation des forces de la coiffe postero-superieure (pour contrebalancer) conduisant a une surutilisation et a therme a une rupture. Avec un CSA diminue, le vecteur des forces du deltoide est plus oblique (en interne), et donc en addition des forces de la coiffe des rotateurs, il y a une augmentation des forces en compression sur le cartilage generant une arthrose. Conclusion Cette etude avec un simulateur informatique de l’epaule confirme, d’un point de vue biomecanique, les donnees cliniques a propos des theories sur le CSA.

PURPOSE The aim of this study was to identify the most accurate and reliable quantitative radiographic parameters for assessing vertical and horizontal instability in different Rockwood grades of acromioclavicular joint (ACJ) separations. Furthermore, the effect of projectional variation on these parameters was investigated in obtaining lateral Alexander view radiographs. METHODS A Sawbone model of a scapula with clavicle was mounted on a holding device, and acromioclavicular dislocations as per the Rockwood classification system were simulated with the addition of horizontal posterior displacement. Projectional variations for each injury type were performed by tilting/rotating the Sawbone construct in the coronal, sagittal or axial plane. Radiographic imaging in the form of an anterior-posterior Zanca view and a lateral Alexander view were taken for each injury type and each projectional variation. Five newly defined radiographic parameters for assessing horizontal and vertical displacement as well as commonly used coracoclavicular distance view were measured. Reliability, validity and the effect of projectional variation were investigated for these radiographic measurements. RESULTS All radiographic parameters showed excellent intra- and interobserver reliability. The validity was excellent for the acromial centre line to dorsal clavicle (AC-DC) in vertical displacement and for the glenoid centre line to posterior clavicle (GC-PC) in horizontal displacement, whilst the remaining measurements showed moderate validity. For AC-DC and GC-PC, convergent validity expressed strong correlation to the effective distance and discriminant validity demonstrated its ability to differentiate between various grades of ACJ dislocations. The effect of projectional variation increased with the degree of deviation and was maximal (3 mm) for AC-DC in 20° anteverted malpositioning and for GC-PC in 20° retroverted malpositioning. CONCLUSIONS AC-DC and the GC-PC are two novel quantitative radiographic parameters of vertical and horizontal instability in ACJ dislocations that demonstrate excellent reliability and validity with reasonable inertness to malpositioning. The use of AC-DC for assessing vertical displacement and GC-PC for assessing horizontal displacement in a single Alexander view is recommended to guide the appropriate management of ACJ dislocations. A better appreciation of the degree of horizontal instability, especially in lower Rockwood grades (II, III) of ACJ dislocations, may improve management of these controversial injuries.

Background: Transfer of the latissimus dorsi tendon to the greater tuberosity of the humerus for treatment of an irreparable rotator cuff tear has been reported to yield good-to-excellent short to intermediate-term results in well-selected patients. The purpose of this study was to evaluate the long-term outcome of such transfers for irreparable posterosuperior rotator cuff tears to determine the durability of the results and to identify risk factors for an unfavorable outcome. Methods: Fifty-seven shoulders in fifty-five patients (seventeen women and thirty-eight men with a mean age of fifty-six years) were managed with latissimus dorsi tendon transfer. Final follow-up was performed at a mean of 147 months. Outcome measures included the Constant score and the Subjective Shoulder Value (SSV). Osteoarthritis, the acromiohumeral distance, and the so-called critical shoulder angle were assessed on standardized radiographs. Results: Forty-six shoulders in forty-four patients were available at the time of final follow-up. The mean SSV increased from 29% preoperatively to 70% at the time of final follow-up, the relative Constant score improved from 56% to 80%, and the pain score improved from 7 to 13 points (p < 0.0001 for all). Mean flexion increased from 118° to 132°, abduction increased from 112° to 123°, and external rotation increased from 18° to 33°. Mean abduction strength increased from 1.2 to 2.0 kg (p = 0.001). There was a slight but significant increase in osteoarthritic changes. Inferior results occurred in shoulders with insufficiency of the subscapularis muscle and fatty infiltration of the teres minor muscle. Superior functional results were observed in shoulders with a small postoperative critical shoulder angle. Conclusions: Latissimus dorsi tendon transfer offered an effective treatment for irreparable posterosuperior rotator cuff tears, with substantial and durable improvements in shoulder function and pain relief. Shoulders with fatty infiltration of the teres minor muscle and insufficiency of the subscapularis muscle tended to have inferior results, as did those with a large critical shoulder angle. Level of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Background This anatomic study investigated the distal humeral articular surface exposure achievable through a triceps-sparing oblique extra-articular osteotomy of the olecranon with a step-cut modification compared with the anconeus flap transolecranon apex distal chevron osteotomy. In addition, the bone contact surface areas of the osteotomized surfaces after transolecranon and extra-articular osteotomies were compared. Methods Seven pairs of fresh adult cadaveric elbow joints were examined. Each of the right elbows underwent triceps-sparing extra-articular step-cut olecranon osteotomy (SCOOT) with an anconeus flap, and the left elbows underwent the anconeus flap transolecranon apex distal chevron osteotomies (CO). The articular surface exposed by each of the osteotomy techniques was then digitally analyzed using a 3-dimensional measurement system. The bone contact surface area of the osteotomized surfaces was also assessed. Results The percentage of total joint exposed by the SCOOT group was less than the CO group (SCOOT: 64% ± 3% vs. CO: 73% ± 3%; P = .002). There was significantly greater bone contact surface area of the osteotomized surfaces in the SCOOT group compared with the CO group (SCOOT: 1172 ± 251 mm2 vs. CO: 457 ± 133 mm2; P = .002). Conclusion The triceps SCOOT procedure with an anconeus flap provides excellent distal humeral articular surface exposure with the added benefit of a substantially increased (2.6-times) bone contact surface area of the osteotomized surfaces.

Stabilizing the acromioclavicular joint in the vertical and horizontal planes is challenging, and most current techniques do not reliably achieve this goal. The BiPOD repair is an arthroscopically assisted procedure performed with image intensifier guidance that reconstructs the coracoclavicular ligaments as well as the acromioclavicular ligaments to achieve bidirectional stability. Repair is achieved with a combination of 2-mm FiberTape (Arthrex, Naples, Florida) and 20-mm Poly-Tape (Neoligaments, Leeds, England) to achieve rigid repair, prevent bone abrasion, and promote tissue ingrowth. This study is a prospective review of the first 6 patients treated for high-grade acute acromioclavicular injury with the BiPOD technique. The study included 6 men who were 21 to 36 years old (mean, 27 years). At 6-month follow-up, complications were recorded and radiographic analysis was used to determine the coracoclavicular distance for vertical reduction and the amount of acromioclavicular translation on the Alexander axillary view was used to determine horizontal reduction. One patient had a superficial infection over the tape knot. The difference in coracoclavicular distance between the operated side and the uninvolved side was 9±2 mm preoperatively and 0.3±2 mm at 6-month follow-up. On Alexander axillary view, all 6 patients showed stable reduction, which is defined as a clavicle that is in line with the acromion. The findings show that BiPOD acromioclavicular reconstruction restores bidirectional stability of the acromioclavicular joint at 6 months. [ Orthopedics. 2017; 40(1):e35–e43.]

Background: The optimal placement of suture anchors in transosseous-equivalent (TOE) double-row rotator cuff repair remains controversial. Purpose: A 3-dimensional (3D) high-resolution micro–computed tomography (micro-CT) histomorphometric analysis of cadaveric proximal humeral greater tuberosities (GTs) was performed to guide optimal positioning of lateral row anchors in posterior-superior (infraspinatus and supraspinatus) TOE rotator cuff repair. Study Design: Descriptive laboratory study. Methods: Thirteen fresh-frozen human cadaveric proximal humeri underwent micro-CT analysis. The histomorphometric parameters analyzed in the standardized volumes of interest included cortical thickness, bone volume, and trabecular properties. Results: Analysis of the cortical thickness of the lateral rows demonstrated that the entire inferior-most lateral row, 15 to 21 mm from the summit of the GT, had the thickest cortical bone (mean, 0.79 mm; P = .0001), with the anterior-most part of the GT, 15 to 21 mm below its summit, having the greatest cortical thickness of 1.02 mm ( P = .008). There was a significantly greater bone volume (BV; posterior, 74.5 ± 27.4 mm3; middle, 55.8 ± 24.9 mm3; anterior, 56.9 ± 20.7 mm3; P = .001) and BV as a percentage of total tissue volume (BV/TV; posterior, 7.3% ± 2.7%, middle, 5.5% ± 2.4%; anterior, 5.6% ± 2.0%; P = .001) in the posterior third of the GT than in intermediate or anterior thirds. In terms of both BV and BV/TV, the juxta-articular medial row had the greatest value (BV, 87.3 ± 25.1 mm3; BV/TV, 8.6% ± 2.5%; P = .0001 for both) followed by the inferior-most lateral row 15 to 21 mm from the summit of the GT (BV, 62.0 ± 22.7 mm3; BV/TV, 6.1% ± 2.2%; P = .0001 for both). The juxta-articular medial row had the greatest value for both trabecular number (0.3 ± 0.06 mm–1; P = .0001) and thickness (0.3 ± 0.08 μm; P = .0001) with the lowest degree of trabecular separation (1.3 ± 0.4 μm; P = .0001). The structure model index (SMI) has been shown to strongly correlate with bone strength, and this was greatest at the inferior-most lateral row 15 to 21 mm from the summit of the GT (2.9 ± 0.9; P = .0001). Conclusion: The inferior-most lateral row, 15 to 21 mm from the tip of the GT, has good bone stock, the greatest cortical thickness, and the best SMI for lateral row anchor placement. The anterior-most part of the GT 15 to 21 mm below its summit had the greatest cortical thickness of all zones. The posterior third of the GT also has good bone stock parameters, second only to the medial row. The best site for lateral row cortical anchor placement is 15 to 21 mm below the summit of the GT. Clinical Relevance: Optimal lateral anchor positioning is 15 to 21 mm below the summit of the greater tuberosity in TOE.

Background: Prolonged percutaneous Kirschner wire transfixion after correction of lesser toe deformities has been associated with an increased rate of complications such as infection, wire breakage or loosening. Currently, the duration of wire transfixion is based on the surgeons' opinion rather than on evidence. We hypothesized that a transfixion time of 3 weeks when compared to 6 weeks would decrease complication rates without an increase in the rate of recurrent deformity. Methods: We prospectively randomized 52 lesser toes corrected for a moderate hammer- or claw toe deformity by means of resectional arthroplasty of the proximal interphalangeal joint into two groups with 3 and 6 weeks of Kirschner wire transfixion, respectively. Kirschner wire-associated complication rates and incidence of early recurrence of malalignment in a short term followup of three months were assessed. Forty-six toes, 23 in each group, were available for final followup. Results: No statistically significant differences were found in pre- and postoperative total AOFAS scores between the groups. No Kirschner wire associated complications occurred. Recurrent malalignment was more often documented in the group with 3 weeks of transfixion (11 of 23 toes, 47.8%) when compared to 6 weeks (two of 23 toes, 8.7%) at 3 months followup. Interphalangeal joint motion was significantly reduced with prolonged Kirschner wire transfixion, indicating a more stable fibrous union ( p = 0.038). Conclusion: At short-term followup, Kirschner wire transfixion of 6 weeks as opposed to 3 weeks showed a lower rate of recurrent malalignment without an increase in Kirschner wire associated complications. Level of Evidence: II, Prospective Comparative Study

Anatomical variability within the autonomic nervous system has long been accepted. This study evaluated the anatomical variability of the cervicothoracic ganglion (CTG) according to its form and, in addition, provided precise measurements between the CTG and the anterior tubercle of the transverse process of the sixth cervical vertebra (C6TP), the first costovertebral articulation, and the vertebral artery. Forty-two adult cadavers were dissected, 22 male and 20 females. Five main forms of CTG were documented; spindle (31.9%), dumbbell (23.2%), truncated (21.7%), perforated (14.5%), and inverted-L (8.7%). The means for length, width, and thickness of the CTG were 18.5 mm, 8.2 mm, and 4.5 mm, respectively. The dimensions were found to be slightly larger in the males than females and on the left sides as compared to the right. The mean shortest distance between the CTGs and the vertebral artery was found to be 2.8 mm, whilst the mean shortest distances to C6TP was 25.7 mm and to the first costovertebral articulation was 1.7 mm. There is great variability in the morphology of the CTG with five common forms consistently seen. The relation to the vertebral artery may influence the form of the ganglion. Two previously undocumented forms are recorded; the truncated which describes the important juxtaposition of the CTG and the vertebral artery and the perforated which describes the piercing of the ganglion itself by the artery. The findings are considered to be of clinical importance to anesthetists, surgeons, neurosurgeons, and anatomists.

We report a continuous series of periprosthetic femoral fractures after knee arthroplasty treated with a locking plate. We hypothesize that minimally invasive surgery and immediate weight-bearing improve functional recovery.From June 2002 to December 2008, 15 patients with 16 fractures were treated. Median age was 81 years. The autonomy level according to the mobility score of Parker and Palmer showed a median of 5 (0-9). Osteosynthesis was performed mainly through a minimally invasive approach using a locking compression plate. The rehabilitation protocol consisted of immediate mobilization and, whenever possible, immediate unrestricted weight-bearing.Five patients died during follow-up, more than 1 year after osteosynthesis. Their results were included. Autonomy and mobility were preserved with a median postoperative score of 4 (0-9) according to Parker and Palmer. The consolidation rate was 93.8%, which was obtained within 10 weeks. There were no mechanical or infectious complications. Fourteen cases were treated with minimally invasive surgery without fracture exposition; the remaining 2 required a slightly more extended approach. Full weight-bearing occurred 10 times; 20-kg partial weight-bearing was advised twice; and on 4 occasions, no weight-bearing was allowed for 6 weeks.Osteosynthesis with a minimally invasive bridge-plating technique is effective in the treatment of periprosthetic, distal femoral fractures without component loosening. Immediate full weight-bearing is possible if certain rules are respected. The surgical management presented herein is beneficial for these challenging fractures, and it may help reduce the complication rate and improve functional outcome.

Background: Controversy exists about the role of metatarsus primus elevatus (MPE) in the presence of hallux rigidus. Previous studies could neither confirm nor reject a causative relationship. Measurement of the true elevation of the first metatarsal according to current techniques lack either precision or accuracy or both. The purpose of this study was to assess MPE by means of a new radiographic measurement method and to analyze how the MPE-values differed among hallux rigidus, hallux valgus and control groups. Materials and Methods: A retrospective study was performed of standing AP and lateral radiographs of 295 feet (221 patients; average age 54 years) randomly selected from our databank. According to general radiographic and clinical criteria, 99 were defined as hallux rigidus. Ninety-nine feet had a hallux valgus deformity without severe arthritis. Ninety-seven radiographs with normal MP-I joints and no other forefoot deformity served as a control group. The elevation of the first metatarsal bone in relation to the second metatarsal (MPE), the first metatarsopahlangeal dorsiflexion angle (DFA), the hallux valgus angle (HVA), the intermetatarsal angle (IMA), the interphalangeal angle (IPA) and the degeneration of the first metatarsophalangeal joint were measured. Three independent raters were involved to assess the inter-rater reliability of a new MPE measurement method. For statistic analyses, ANOVA testing was used. Results: MPE was significantly greater in patients with hallux rigidus (+5.2 mm; 95% CI: 4.7 to 5.7) when compared with hallux valgus (+2.8 mm; 95% CI: 2.2 to 3.4) or the control group (+2.6; 95% CI: 2.0–3.2; p < 0.0001). The DFA was found to be significantly lower in the hallux rigidus group (9 degrees; 95% CI: 8 to 10) when compared with those measured in the hallux valgus (14 degrees; 95% CI: 13 to 16) and control groups (11 degrees; 95% CI: 10 to 12; p < 0.0001). There was a no correlation found between MPE and osteoarthritis at MP-I joint ( r = 0.35; p < 0.0001). A moderate correlation was found between increasing MPE and decreasing DFA ( r = 0.5; p < 0.0001). The inter-rater reliability of the MPE measurement method was found to be accurate and reproducible ( r = 0.9; p < 0.0001). Conclusion: Based on the findings in this study, an MPE greater than 5 mm could be considered a predictive factor in the presence of hallux rigidus. However, the mechanism of MPE has yet to be determined.Level of Evidence: III, Case Control Series

Hypothesis Satisfactory results after repair of isolated axillary nerve lesions using sural nerve autografts have been reported, but a delay between injury and surgical repair exceeding 6 months was one of the most important negative predictors of functional outcome. From our experience, we hypothesize that good results can be obtained even after a delay exceeding 6 months and we opted in this study to assess the value of delayed axillary nerve reconstruction. Materials and methods We evaluated clinical outcome and donor-site morbidity in 12 patients (mean age, 37; range, 19-66 years) who underwent axillary nerve repair with sural nerve graft with an average 11.25-month a delay between trauma and surgery (range, 8-20 months). Follow-up examination at least 24 months after treatment included assessment of shoulder range of motion, deltoid muscle strength in near full extension, deltoid extension lag, and sensibility. Constant Score, subjective shoulder value, and the Disabilities of Arm, Shoulder and Hand score were also assessed. Results All patients showed an improved deltoid function of at least M3. Postoperative extension lag, as the most specific sign of isolated deltoid function, improved from 57.5° to 14.2°. All stated that they would have identical elective surgery again. Relevant donor-site morbidity was not observed. Conclusion Our data indicate that even delayed axillary nerve grafting may lead to satisfactory functional results with a low morbidity and should therefore be done in selected patients.

Background The critical shoulder angle combines the acromion index and glenoid inclination and has potential to discriminate between shoulders at risk for rotator cuff tear or osteoarthritis and those that are asymptomatic. However, its biomechanics, and particularly the role of the glenoid inclination, are not yet fully understood. Methods A shoulder simulator was used to analyze the independent influence of glenoid inclination during abduction from 0 to 60°. Spindle motors transferred tension forces by a cable-pulley on human cadaveric humeri. A six-degree-of-freedom force transducer was mounted directly behind the polyethylene glenoid to measure shear and compressive joint reaction force and calculate the instability ratio (ratio of shear and compressive joint reaction force) with the different force ratios of the deltoid and supraspinatus muscles (2:1 and 1:1). A stepwise change in the inclination by 5° increments allowed simulation of a critical shoulder angle range of 20° to 45°. Findings Tilting the glenoid to cranial (increasing the critical shoulder angle) increases the shear joint reaction force and therefore the instability ratio. A balanced force ratio (1:1) between the deltoid and the supraspinatus allowed larger critical shoulder angles before cranial subluxation occurred than did the deltoid-dominant ratio (2:1). Interpretation Glenoid inclination-dependent changes of the critical shoulder angle have a significant impact on superior glenohumeral joint stability. The increased compensatory activity of the rotator cuff to keep the humeral head centered may lead to mechanical overload and could explain the clinically observed association between large angles and degenerative rotator cuff tears.

Level of Evidence: V, Expert Opinion