Search

Bioactive and biodegradable scaffolds that mimic the natural extracellular matrix of bone serve as temporary structures to guide new bone tissue growth. In this study, 3D-printed scaffolds composed of poly (lactic acid) (PLA)-tricalcium phosphate (TCP) (90-10 wt.%) were modified with 1%, 5%, and 10 wt.% of ZnO to enhance bone tissue regeneration. A commercial chain extender named Joncryl was incorporated alongside ZnO to ensure the printability of the composites. Filaments were manufactured using a twin-screw extruder and subsequently used to print 3D scaffolds via fused filament fabrication (FFF). The scaffolds exhibited a homogeneous distribution of ZnO and TCP particles, a reproducible structure with 300 μm pores, and mechanical properties suitable for bone tissue engineering, with an elastic modulus around 100 MPa. The addition of ZnO resulted in enhanced surface roughness on the scaffolds, particularly for ZnO microparticles, achieving values up to 241 nm. This rougher topography was responsible for enhancing protein adsorption on the scaffolds, with an increase of up to 85% compared to the PLA-TCP matrix. Biological analyses demonstrated that the presence of ZnO promotes mesenchymal stem cell (MSC) proliferation and differentiation into osteoblasts. Alkaline phosphatase (ALP) activity, an important indicator of early osteogenic differentiation, increased up to 29%. The PLA-TCP composite containing 5% ZnO microparticles exhibited an optimized degradation rate and enhanced bioactivity, indicating its promising potential for bone repair applications., (© 2024 IOP Publishing Ltd.)

Background: Poly (lactic acid) (PLA) is a biodegradable polyester that has been exploited for a variety of biomedical applications, including tissue engineering. The incorporation of β-tricalcium phosphate (TCP) into PLA has imparted bioactivity to the polymeric matrix., Methods: We have modified a 90%PLA-10%TCP composite with SiO 2 and MgO (1, 5 and 10 wt%), separately, to further enhance the material bioactivity. Filaments were prepared by extrusion, and scaffolds were fabricated using 3D printing technology associated with fused filament fabrication., Results: The PLA-TCP-SiO 2 composites presented similar structural, thermal, and rheological properties to control PLA and PLA-TCP. In contrast, the PLA-TCP-MgO composites displayed absence of crystallinity, lower polymeric molecular weight, accelerated degradation ratio, and decreased viscosity within the 3D printing shear rate range. SiO 2 and MgO particles were homogeneously dispersed within the PLA and their incorporation increased the roughness and protein adsorption of the scaffold, compared to a PLA-TCP scaffold. This favorable surface modification promoted cell proliferation, suggesting that SiO 2 and MgO may have potential for enhancing the bio-integration of scaffolds in tissue engineering applications. However, high loads of MgO accelerated the polymeric degradation, leading to an acid environment that imparted the composite biocompatibility. The presence of SiO 2 stimulated mesenchymal stem cells differentiation towards osteoblast; enhancing extracellular matrix mineralization, alkaline phosphatase (ALP) activity, and bone-related genes expression., Conclusion: The PLA-10%TCP-10%SiO 2 composite presented the most promising results, especially for bone tissue regeneration, due to its intense osteogenic behavior. PLA-10%TCP-10%SiO 2 could be used as an alternative implant for bone tissue engineering application., (© 2023. Korean Tissue Engineering and Regenerative Medicine Society.)

The fabrication of customized implants by additive manufacturing has allowed continued development of the personalized medicine field. Herein, a 3D-printed bioabsorbable poly (lactic acid) (PLA)- β-tricalcium phosphate (TCP) (10 wt %) composite has been modified with CeO 2 nanoparticles (CeNPs) (1, 5 and 10 wt %) for bone repair. The filaments were prepared by melt extrusion and used to print porous scaffolds. The nanocomposite scaffolds possessed precise structure with fine print resolution, a homogenous distribution of TCP and CeNP components, and mechanical properties appropriate for bone tissue engineering applications. Cell proliferation assays using osteoblast cultures confirmed the cytocompatibility of the composites. In addition, the presence of CeNPs enhanced the proliferation and differentiation of mesenchymal stem cells; thereby, increasing alkaline phosphatase (ALP) activity, calcium deposition and bone-related gene expression. Results from this study have shown that the 3D printed PLA-TCP-10%CeO 2 composite scaffold could be used as an alternative polymeric implant for bone tissue engineering applications: avoiding additional/revision surgeries and accelerating the regenerative process., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors. Published by Elsevier Ltd.)

Polycaprolactone (PCL) has been extensively applied on tissue engineering because of its low-melting temperature, good processability, biodegradability, biocompatibility, mechanical resistance, and relatively low cost. The advance of additive manufacturing (AM) technologies in the past decade have boosted the fabrication of customized PCL products, with shorter processing time and absence of material waste. In this context, this review focuses on the use of AM techniques to produce PCL scaffolds for various tissue engineering applications, including bone, muscle, cartilage, skin, and cardiovascular tissue regeneration. The search for optimized geometry, porosity, interconnectivity, controlled degradation rate, and tailored mechanical properties are explored as a tool for enhancing PCL biocompatibility and bioactivity. In addition, rheological and thermal behavior is discussed in terms of filament and scaffold production. Finally, a roadmap for future research is outlined, including the combination of PCL struts with cell-laden hydrogels and 4D printing., (© 2021 Wiley Periodicals LLC.)

This paper investigates the use of an aqueous dispersion of polyethylene copolymer with a relatively high content of acrylic acid as a compatibilizer and as an alternative medium to obtain polyethylene CNF nanocomposites. The CNF content was varied from 1 to 90wt% and the appearance, optical, thermal, mechanical and rheological properties, as well the morphology of the films were evaluated. The PE/CNF films are transparent up to 20wt% of NFC indicating a good dispersion of CNF, but a poor distribution, with PE-rich and CNF-rich regions observed by SEM. Improved mechanical properties were achieved, with a 100% and 15,900% increase in the Young's modulus with 1wt% and 90wt% NFC, respectively. The rheological behavior indicated good melt processability. According to these results, aqueous polyolefin dispersions seem to be a promising, easy and relatively fast route for obtaining cellulose/polyolefins nanocomposites with low to high contents of cellulose nanofibrils., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Water suspensions of cellulose nanofibres with xylan, xyloglucan and pectin were studied for foaming and structural properties as a new means for food structuring. The dispersions were analysed with rheological measurements, microscopy and optical coherence tomography. A combination of xylan with TEMPO-oxidized nanocellulose produced a mixture with well-dispersed air bubbles, while the addition of pectin improved the elastic modulus, hardness and toughness of the structures. A similar structure was observed with native nanocellulose, but the elastic modulus was not as high. Shear flow caused cellulose nanofibres to form plate-like flocs in the suspension that accumulated near bubble interfaces. This tendency could be affected by adding laccase to the dispersion, but the effect was opposite for native and TEMPO-oxidized nanocellulose. Nanocellulose type also influenced the interactions between nanofibers and other polysaccharides. For example, xyloglucan interacted strongly with TEMPO-oxidized nanocellulose (high storage modulus) but not with native nanocellulose., (Copyright © 2017 Elsevier Ltd. All rights reserved.)