Search

NiO-based films and nanostructured materials have received increasing attention for a variety of technological applications. Among the possible strategies for their fabrication, atomic layer deposition (ALD) and chemical vapor deposition (CVD), featuring manifold advantages of technological interest, represent appealing molecule-to-material routes for which a rational precursor design is a critical step. In this context, the present study is focused on the coordination sphere engineering of three heteroleptic Ni(II) β-diketonate–diamine adducts of general formula [NiL2TMEDA] [L = 1,1,1-trifluoro-2,4-pentanedionate (tfa), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedionate (fod) or 2,2,6,6-tetramethyl-3,5-heptanedionate (thd), and TMEDA = N,N,N′,N′-tetramethylethylenediamine]. Controlled variations in the diketonate structure are pursued to investigate the influence of steric hindrance and fluorination degree on the chemico-physical characteristics of the compounds. A multi-technique investigation supported by density functional calculations highlights that all complexes are air-insensitive and monomeric and that their thermal properties and fragmentation patterns are directly dependent on functional groups in the diketonate ligands. Preliminary thermal CVD experiments demonstrate the precursors' suitability for the obtainment of NiO films endowed with flat and homogeneous surfaces, paving the way to future implementation for CVD end-uses. [ABSTRACT FROM AUTHOR]

Graphitic carbon nitride (gCN) is a promising n-type semiconductor widely investigated for photo-assisted water splitting, but less studied for the (photo)electrochemical degradation of aqueous organic pollutants. In these fields, attractive perspectives for advancements are offered by a proper engineering of the material properties, e.g., by depositing gCN onto conductive and porous scaffolds, tailoring its nanoscale morphology, and functionalizing it with suitable cocatalysts. The present study reports on a simple and easily controllable synthesis of gCN flakes on Ni foam substrates by electrophoretic deposition (EPD), and on their eventual decoration with Co-based cocatalysts [CoO, CoFe2O4, cobalt phosphate (CoPi)] via radio frequency (RF)-sputtering or electrodeposition. After examining the influence of processing conditions on the material characteristics, the developed systems are comparatively investigated as (photo)anodes for water splitting and photoelectrocatalysts for the degradation of a recalcitrant water pollutant [potassium hydrogen phthalate (KHP)]. The obtained results highlight that while gCN decoration with Co-based cocatalysts boosts water splitting performances, bare gCN as such is more efficient in KHP abatement, due to the occurrence of a different reaction mechanism. The related insights, provided by a multi-technique characterization, may provide valuable guidelines for the implementation of active nanomaterials in environmental remediation and sustainable solar-to-chemical energy conversion. [ABSTRACT FROM AUTHOR]

[Display omitted] • Graphitic carbon nitride (g-C 3 N 4) is deposited by decantation and functionalized with CoO and CoFe 2 O 4 co-catalysts. • Pure g-C 3 N 4 -based composite systems, featuring an intimate contact with CoO and CoFe 2 O 4 nanoparticles, are obtained. • The construction of p - n g-C 3 N 4 -CoO and Z -scheme g-C 3 N 4 -CoFe 2 O 4 junctions is effective in enhancing oxygen evolution performances. • The present results pave the way to the implementation of stable, cheap and active anodes for solar water splitting. The ever-increasing energy demand from the world population has made the intensive use of fossil fuels an overarching threat to global environment and human health. An appealing alternative is offered by sunlight-assisted photoelectrochemical water splitting to yield carbon-free hydrogen fuel, but kinetic limitations associated to the oxygen evolution reaction (OER) render the development of cost-effective, eco-friendly and stable electrocatalysts an imperative issue. In the present work, OER catalysts based on graphitic carbon nitride (g-C 3 N 4) were deposited on conducting glass substrates by a simple decantation procedure, followed by functionalization with low amounts of nanostructured CoO and CoFe 2 O 4 by radio frequency (RF)-sputtering, and final annealing under inert atmosphere. A combination of advanced characterization tools was used to investigate the interplay between material features and electrochemical performances. The obtained results highlighted the formation of a p - n junction for the g-C 3 N 4 -CoO system, whereas a Z -scheme junction accounted for the remarkable performance enhancement yielded by g-C 3 N 4 -CoFe 2 O 4. The intimate contact between the system components also afforded an improved electrocatalyst stability in comparison to various bare and functionalized g-C 3 N 4 -based systems. These findings emphasize the importance of tailoring g-C 3 N 4 chemico-physical properties through the dispersion of complementary catalysts to fully exploit its applicative potential. [ABSTRACT FROM AUTHOR]

The lipopolysaccharide (LPS) transport (Lpt) system is responsible for transferring LPS from the periplasmic surface of the inner membrane (IM) to the outer leaflet of the outer membrane (OM), where it plays a crucial role in OM selective permeability. In E. coli seven essential proteins are assembled in an Lpt trans-envelope complex, which is conserved in γ-Proteobacteria. LptBFG constitute the IM ABC transporter, LptDE form the OM translocon for final LPS delivery, whereas LptC, an IM-anchored protein with a periplasmic domain, interacts with the IM ABC transporter, the periplasmic protein LptA, and LPS. Although essential, LptC can tolerate several mutations and its role in LPS transport is unclear. To get insights into the functional role of LptC in the Lpt machine we searched for viable mutants lacking LptC by applying a strong double selection for lptC deletion mutants. Genome sequencing of viable ΔlptC mutants revealed single amino acid substitutions at a unique position in the predicted large periplasmic domain of the IM component LptF (LptFSupC). In complementation tests, lptFSupC mutants suppress lethality of both ΔlptC and lptC conditional expression mutants. Our data show that mutations in a specific residue of the predicted LptF periplasmic domain can compensate the lack of the essential protein LptC, implicate such LptF domain in the formation of the periplasmic bridge between the IM and OM complexes, and suggest that LptC may have evolved to improve the performance of an ancestral six-component Lpt machine. [ABSTRACT FROM AUTHOR]

The assembly of lipopolysaccharide (LPS) in the outer leaflet of the outer membrane (OM) requires the transenvelope Lpt (lipopolysaccharide transport) complex, made in Escherichia coli of seven essential proteins located in the inner membrane (IM) (LptBCFG), periplasm (LptA), and OM (LptDE). At the IM, LptBFG constitute an unusual ATP binding cassette (ABC) transporter, composed by the transmembrane LptFG proteins and the cytoplasmic LptB ATPase, which is thought to extract LPS from the IM and to provide the energy for its export across the periplasm to the cell surface. LptC is a small IM bitopic protein that binds to LptBFG and recruits LptA via its N- and C-terminal regions, and its role in LPS export is not completely understood. Here, we show that the expression level of lptB is a critical factor for suppressing lethality of deletions in the C-terminal region of LptC and the functioning of a hybrid Lpt machinery that carries Pa-LptC, the highly divergent LptC orthologue from Pseudomonas aeruginosa. We found that LptB overexpression stabilizes C-terminally truncated LptC mutant proteins, thereby allowing the formation of a sufficient amount of stable IM complexes to support growth. Moreover, the LptB level seems also critical for the assembly of IM complexes carrying Pa-LptC which is otherwise defective in interactions with the E. coli LptFG components. Overall, our data suggest that LptB and LptC functionally interact and support a model whereby LptB plays a key role in the assembly of the Lpt machinery. [ABSTRACT FROM AUTHOR]

[Display omitted] • Graphitic carbon nitride (g-CN) is developed via electrophoresis and functionalized with Ag and Au by sputtering. • Pure g-CN-based composites containing atomically dispersed (Ag), low-sized (Au) or alloyed nanoparticles (Au + Ag), are obtained. • The higher performances produced by Au nanoparticle introduction depends on Schottky junctions and surface plasmon resonance (SPR). • The reported results open the door to improved photocatalysts for carbon–neutral energy production. The strategic interest in the production of green hydrogen by sunlight-activated water splitting has stimulated significant efforts aimed at the implementation of active and cost-effective catalysts for the oxygen evolution reaction (OER), the overall process bottleneck. Herein, we report on an original fabrication route to OER electrocatalysts based on graphitic carbon nitride. In particular, the target systems were deposited on conductive glass substrates via a simple electrophoretic technique and functionalized with highly dispersed noble metals (Au, Ag or Au + Ag) in low amounts by radio frequency (RF)-sputtering under mild conditions. An advanced material characterization revealed the possibility of tailoring carbon nitride morphology as a function of the used precursor and of achieving a homogeneous spatial distribution of the functionalizing metals. The latter ranged from atomically dispersed (silver), to low-sized nanoaggregates (gold) or partially alloyed core–shell nanoparticles (gold+silver), with an intimate metal-nitride interfacial contact. Functional tests evidenced a remarkable sensitivity to Vis light even at low applied potentials, and photoelectrocatalytic performances directly dependent on the nature of metal species and on the features of the underlying carbon nitride deposit. These evidences, rationalized mainly on the basis of Schottky junctions and the possible concurrence of surface plasmon resonance (SPR), candidate the proposed strategy as a versatile route to cheap and efficient OER electrocatalysts for energy conversion. [ABSTRACT FROM AUTHOR]

NiO-based nanomaterials have attracted considerable interest for different applications, which have stimulated the implementation of various synthetic approaches aimed at modulating their chemico-physical properties. In this regard, their bottom-up preparation starting from suitable precursors plays an important role, although a molecular-level insight into their reactivity remains an open issue to be properly tackled. In the present study, we focused on the fragmentation of Ni(II) diketonate-diamine adducts, of interest as vapor-phase precursors for Ni(II) oxide systems, by combining electrospray ionization mass spectrometry (ESI-MS) with multiple collisional experiments (ESI-MSn) and theoretical calculations. The outcomes of this investigation revealed common features in the fragmentation pattern of the target compounds: (i) in the first fragmentation, the three complexes yield analogous base-peak cations by losing a negatively charged diketonate moiety; in these cations, Ni-O and Ni-N interactions are stronger and the Ni positive charge is lower than in the parent neutral complexes; (ii) the tendency of ligand electronic charge to migrate towards Ni further increases in the subsequent fragmentation, leading to the formation of a tetracoordinated Ni environment featuring an interesting cation-π intramolecular interaction. [ABSTRACT FROM AUTHOR]

Simple Summary: In situ vaccination (ISV) envisages the intratumoral injection of immunostimulatory molecules, which inflame the tumor and induce anti-tumor immune responses. Since bacterial outer membrane vesicles (OMVs) are naturally decorated with components which stimulate innate immunity, we tested whether OMVs can be used in ISV. Using three different tumor mouse models, we demonstrated the effectiveness of OMVs in inhibiting tumor development and in curing a large fraction of treated mice. We also show that if combined with tumor-specific neoantigens, the anti-tumor activity of OMVs is further enhanced. These latter results are particularly relevant since they support the use of a general strategy to optimize any in situ vaccination protocol. Considering their potency and the ease with which are produced, OMV-based ISV has the potential to become a standard of care for most solid tumors, particularly as a neoadjuvant therapy to be performed before surgery. In situ vaccination (ISV) is a promising cancer immunotherapy strategy that consists of the intratumoral administration of immunostimulatory molecules (adjuvants). The rationale is that tumor antigens are abundant at the tumor site, and therefore, to elicit an effective anti-tumor immune response, all that is needed is an adjuvant, which can turn the immunosuppressive environment into an immunologically active one. Bacterial outer membrane vesicles (OMVs) are potent adjuvants since they contain several microbe-associated molecular patterns (MAMPs) naturally present in the outer membrane and in the periplasmic space of Gram-negative bacteria. Therefore, they appear particularly indicted for ISV. In this work, we first show that the OMVs from E. coli BL21(DE3)Δ60 strain promote a strong anti-tumor activity when intratumorally injected into the tumors of three different mouse models. Tumor inhibition correlates with a rapid infiltration of DCs and NK cells. We also show that the addition of neo-epitopes to OMVs synergizes with the vesicle adjuvanticity, as judged by a two-tumor mouse model. Overall, our data support the use of the OMVs in ISV and indicate that ISV efficacy can benefit from the addition of properly selected tumor-specific neo-antigens. [ABSTRACT FROM AUTHOR]

RodZ of rod‐shaped bacteria functions to link MreB filaments to the Rod peptidoglycan (PG) synthase complex that moves circumferentially perpendicular to the long cell axis, creating hoop‐like sidewall PG. Ovoid‐shaped bacteria, such as Streptococcus pneumoniae (pneumococcus; Spn) that lack MreB, use a different modality for peripheral PG elongation that emanates from the midcell of dividing cells. Yet, S. pneumoniae encodes a RodZ homolog similar to RodZ in rod‐shaped bacteria. We show here that the helix‐turn‐helix and transmembrane domains of RodZ(Spn) are essential for growth at 37°C. ΔrodZ mutations are suppressed by Δpbp1a, mpgA(Y488D), and ΔkhpA mutations that suppress ΔmreC, but not ΔcozE. Consistent with a role in PG elongation, RodZ(Spn) co‐localizes with MreC and aPBP1a throughout the cell cycle and forms complexes and interacts with PG elongasome proteins and regulators. Depletion of RodZ(Spn) results in aberrantly shaped, non‐growing cells and mislocalization of elongasome proteins MreC, PBP2b, and RodA. Moreover, Tn‐seq reveals that RodZ(Spn), but not MreCD(Spn), displays a specific synthetic‐viable genetic relationship with aPBP1b, whose function is unknown. We conclude that RodZ(Spn) acts as a scaffolding protein required for elongasome assembly and function and that aPBP1b, like aPBP1a, plays a role in elongasome regulation and possibly peripheral PG synthesis. [ABSTRACT FROM AUTHOR]

Lipopolysaccharide ( LPS) is the main glycolipid present in the outer leaflet of the outer membrane ( OM) of Gram-negative bacteria, where it modulates OM permeability, therefore preventing many toxic compounds from entering the cell. LPS biogenesis is an essential process in Gram-negative bacteria and thus is an ideal target pathway for the development of novel specific antimicrobials. The lipopolysaccharide transport (Lpt) system is responsible for transporting LPS from the periplasmic surface of the inner membrane, where it is assembled, to the cell surface where it is then inserted in the OM. The Lpt system has been widely studied in Escherichia coli, where it consists of seven essential proteins located in the inner membrane (Lpt BCFG), in the periplasm (LptA) and in the OM (Lpt DE). In the present study, we focus our attention on the Pseudomonas aeruginosa PAO1 Lpt system. We identified an LptA orthologue, named LptH, and solved its crystal structure at a resolution of 2.75 Å. Using interspecies complementation and site-directed mutagenesis of a conserved glycine residue, we demonstrate that P. aeruginosa LptH is the genetic and functional homologue of E. coli LptA, with whom it shares the β-jellyroll fold identified also in other members of the canonical E. coli Lpt model system. Furthermore, we modeled the N-terminal β-jellyroll domain of P. aeruginosa LptD, based on the crystal structure of its homologue from Shigella flexneri, aiming to provide more general insight into the mechanism of LPS binding and transport in P. aeruginosa. Both LptH and LptD may represent new targets for the discovery of next generation antibacterial drugs, targeting specific opportunistic pathogens such as P. aeruginosa. Database Coordinates and structure factors have been deposited in the Protein Data Bank under accession number PDB . [ABSTRACT FROM AUTHOR]

Lipopolysaccharide (LPS) is the main glycolipid present in the outer leaflet of the outer membrane (OM) of Gram-negative bacteria, where it modulates OM permeability, therefore preventing many toxic compounds from entering the cell. LPS biogenesis is an essential process in Gram-negative bacteria and thus is an ideal target pathway for the development of novel specific antimicrobials. The lipopolysaccharide transport (Lpt) system is responsible for transporting LPS from the periplasmic surface of the inner membrane, where it is assembled, to the cell surface where it is then inserted in the OM. The Lpt system has been widely studied in Escherichia coli, where it consists of seven essential proteins located in the inner membrane (LptBCFG), in the periplasm (LptA) and in the OM (LptDE). In the present study, we focus our attention on the Pseudomonas aeruginosa PAO1 Lpt system. We identified an LptA orthologue, named LptH, and solved its crystal structure at a resolution of 2.75 A. Using interspecies complementation and site-directed mutagenesis of a conserved glycine residue, we demonstrate that P. aeruginosa LptH is the genetic and functional homologue of E. coli LptA, with whom it shares the b-jellyroll fold identified also in other members of the canonical E. coli Lpt model system. Furthermore, we modeled the N-terminal b-jellyroll domain of P. aeruginosa LptD, based on the crystal structure of its homologue from Shigella flexneri, aiming to provide more general insight into the mechanism of LPS binding and transport in P. aeruginosa. Both LptH and LptD may represent new targets for the discovery of next generation antibacterial drugs, targeting specific opportunistic pathogens such as P. aeruginosa. [ABSTRACT FROM AUTHOR]