Search

International audience; Context. The circumgalactic medium (CGM) is the location where the interplay between large-scale outflows and accretion onto galaxies occurs. Metals in different ionization states flowing between the circumgalactic and intergalactic mediums are affected by large galactic outflows and low-ionization state inflowing gas. Observational studies on their spatial distribution and their relation with galaxy properties may provide important constraints on models of galaxy formation and evolution. Aims. The main goal of this paper is to provide new insights into the spatial distribution of the circumgalactic of star-forming galaxies at 1.5 < z 1.5) and stellar mass (log[ M ⋆ / M ⊙ ] > 10.2) show stronger C IV absorptions compared with those low SFR (log[SFR/( M ⊙ yr −1 )]

International audience

The MCAO Assisted Visible Imager and Spectrograph (MAVIS), is a new instrument for ESO’s Very Large Telescope. The instrument will be installed at the Nasmyth focus of the UT4 telescope and is comprised of an imager and a spectrograph which will take advantage of the unprecedented angular resolution and sky coverage provided by LGS assisted MCAO correction at visible wavelengths. The Adaptive Optics Module (AOM) is the core engine of MAVIS, devoted to multi-conjugate wavefront sensing and correction, and designed to deliver a 30×30 arcsec2 corrected field of view to the scientific instruments. In this paper we focus on the optical design of the AOM, which has been optimized to perform several tasks including field de-rotation, atmospheric dispersion correction, and adaptive optics closed-loop operations. To maximize sky coverage, the system is designed to deliver a 2 arcmin field of view for the selection of up to 3 NGS for measurement of tip-tilt. The AOM module also includes a multiple LGS WFS for high-order wavefront measurements and two post-focal DMs for wide field turbulence compensation. The proposed design is the result of a trade-off study in which particular care has been devoted to satisfy performance and operational requirements, as well as modularity. We present here a complete description of the selected optical configuration with a summary of the performance analyses.

We recommend a conceptual design study for a spectroscopic facility in the southern hemisphere comprising a large diameter telescope, fiber system, and spectrographs collectively optimized for massively-multiplexed spectroscopy. As a baseline, we propose an 11.4-meter aperture, optical spectroscopic survey telescope with a five square degree field of view. Using current technologies, the facility could be equipped with 15,000 robotically-controlled fibers feeding spectrographs over 360, Comment: Submitted to the Astro2020 Decadal Survey as a facilities white paper

This paper discusses refractive, reflective and catadioptric designs for the Thirty Meter Telescope Fiber Wide Field Optical Spectrograph (WFOS) instrument concept. Custom macros were written to evaluate performance at the detector plane with the grating at the pupil as a function of fiber position in the pseudo-slit and wavelength, and a tolerance analysis has been performed for each design based on best engineering practices to assess performance robustness against opto-mechanical errors. The catadioptric camera appears to provide the best compromise in this regard.

This new type of very fast (F/0.95) camera is fully achromatic and made of only 3 components: a mirror and 2 fused silica lenses. The 2 lenses are glued together. The camera offers better image quality than classical Schmidt or equivalent and is much smaller and lighter. This camera was developed for the MOONS spectrograph.

During the development of the VLT instrumentation program, ESO acquired considerable expertise in the area of infrared detectors, their testing and optimizing their performance. This can mainly be attributed to a very competent team and most importantly to the availability of a very well suited test facility, namely, IRATEC. This test facility was designed more than 15 years ago, specifically for 1K × 1K detectors such as the Aladdin device, with a maximum field of only 30 mm square. Unfortunately, this facility is no longer suited for the testing of the new larger format detectors that are going to be used to equip the future E-ELT instruments. It is projected that over the next 20 years, there will be of the order of 50-100 very large format detectors to be procured and tested for use with E-ELT first and second generation instruments and VLT third generation instruments. For this reason ESO has initiated the in-house design and construction of a dedicated new IR detector arrays test facility: the Facility for Infrared Array Testing (FIAT). It will be possible to mount up to four 60 mm square detectors in the facility, as well as mosaics of smaller detectors. It is being designed to have a very low thermal background such that detectors with 5.3 μm cut-off material can routinely be tested. The paper introduces the most important use cases for which FIAT is designed: they range from performing routine performance measurements on acquired devices, optimization setups for custom applications (like spot scan intra-pixel response, persistence and surface reflectivity measurements), test of new complex operation modes (e.g. high speed subwindowing mode for low order sensing, flexure control, etc.) and the development of new tests and calibration procedures to support the scientific requirements of the E-ELT and to allow troubleshooting the unexpected challenges that arise when a new detector system is brought online. The facility is also being designed to minimize the downtime required to change to a new detector and then cool it down, ready for testing. The status of the opto-mechanical and cryogenic design is also described in detail, with particular emphasis on the technical solutions identified to fulfill the FIAT top level requirements. We will also describe how the FIAT project has been set-up as a training facility for the younger generation of engineers who are expected to take over the job from the experienced engineers and ensure that the lessons learnt in so many years of successful IR instrumentation projects at ESO are captured for this next generation.

The 4-meter Multi-Object Spectroscopic Telescope (4MOST) is a wide-field, high-multiplex spectroscopic survey facility under development for the Visible and Infrared Survey Telescope for Astronomy (VISTA) of the European Southern Observatory (ESO). The primary and secondary mirrors (M1 and M2) together with the Wide Field Corrector (WFC) system provide a pupil-centric and aberration corrected focal surface. The WFC is also an integral part of the metrology system. At the focal surface, we meet two wave front sensing (WFS) systems, a deployable camera at commissioning, an acquisition and guiding (A and G) unit and a secondary guiding unit. This paper provides an overview of design details and Manufacture, Assembly, Integration and Verification (MAIV) processes for the 4MOST WFC system.

ASSIST - The Adaptive Secondary Setup and Instrument STimulator is a test setup to verify the operation of three elements of the VLT Adaptive Optics Facility, namely the Deformable Secondary Mirror (DSM) and the two AO systems using this DSM, the AO system for the visible light integral field spectrograph MUSE (GALACSI) and the AO system for the IR wide field imager HAWK-I (GRAAL). To support the testing of these elements, ASSIST will provide both an interferometry setup for testing the DSM as well as a full atmospheric turbulence simulator and star simulator to mimic the conditions at the telescope. To test the instruments using the DSM, the output beam is matched the output beam of the VLT telescope, including the correct exit-pupil and high-quality imaging and a similar hardware interface is provided. Since one of the modes to be verified is nearly diffraction limited, also the thermal and vibrational stability are very important, with strong constraints on both the mechanical as well as the optical design. ASSIST is finalizing its preliminary design phase and in this paper we present the current optical and mechanical design of ASSIST and the projected performance of the test bench for both the testing and calibration of the DSM as well as for the two AO systems under test.

ASSIST: The Adaptive Secondary Setup and Instrument STimulator is the test setup for the verification and calibration of three elements of the VLT Adaptive Optics Facility.; the Deformable Secondary Mirror (DSM) the AO system for MUSE and HAWK-I (GALACSI and GRAAL). In the DSM testing mode the DSM will be tested using both interferometry and fast wave front sensing. In full AO mode, ASSIST will allow testing of the AO systems under realistic atmospheric conditions and optically equivalent to the conditions on the telescope. ASSIST is nearing its final design review and in this paper we present the current optical and mechanical design of ASSIST. In this paper we highlight some of the specific aspects of ASSIST that we are developing for ASSIST.

ESPRESSO is a high resolution UV-vis spectrograph that will be placed in the combined Coude laboratory of the ESO VLT. The instrument is in its assembly phase and the Coude optics will start to be mounted at the telescope in the first quarter of 2016. This paper describes the optics of the train and the strategies for its alignment taking into account the main constraints: accessibility, mechanical, as per built optics, tolerances and tools.

MUSE, the Multi-Unit Spectroscopic Explorer, is an adaptive optics (AO)-assisted Integral Field Spectrograph, currently in the Preliminary Design Phase as a second generation instrument for the VLT. MUSE will feature two modes, each with an associated AO mode. The first mode is the wide field mode, mainly aiming at the study of high redshift galaxies. For this mode, the AO system has to deliver an improvement of at least a factor of two over the full 1′ × 1′ field of view. The second mode, the narrow field mode, aims at the high-resolution spectroscopy of nearby extended objects, for example, galaxies and globular clusters. For this mode, the AO system will have to deliver near-diffraction limited performance over a small field of view. In this paper, we discuss the trade-offs in the current design of GALACSI – the MUSE AO system – and illustrate with a number of simulations the expected performance in the wide- and narrow field modes.

We will introduce the present knowledge of the turbulence profile C n 2 and in particular we will emphasise the existence of a turbulence layer close to the ground. Then we will present the concept of Ground Layer Adaptive Optics and will provide estimates of performance expected from such systems and their potential for astronomical applications. Finally we will provide practical implementation concepts for two instruments at the VLT, MUSE and HAWK-I using multi-Laser Guide Stars and a large Deformable Secondary Mirror. The latter will also be described as its use is optimum for GLAO systems. To cite this article: N. Hubin et al., C. R. Physique 6 (2005).

The European Southern Observatory (ESO) together with external research institutes have built a Multi-Conjugate Adaptive Optics (MCAO) Demonstrator (MAD) to perform wide field-of-view adaptive optics correction (2′ in K band). The aim of MAD is to demonstrate the on-sky feasibility of the MCAO technique and to evaluate its critical aspects in the framework of both the 2nd generation instrumentation for the Very Large Telescope (VLT) and the Overwhelmingly Large Telescope (OWL). The MAD module will be installed on the VLT to perform on-sky observations. MAD comprises two deformable mirrors and two different multi-reference wavefront sensors with natural guide stars. In this article we present the MAD design, some aspects of the MAD calibration and the first closed-loop results in the laboratory in Single Conjugated Adaptive Optics (SCAO) and Ground Layer Adaptive Optics (GLAO) configurations. To cite this article: E. Marchetti et al., C. R. Physique 6 (2005).

Various projects to find planets or entire planetary systems around main sequence stars in the solar neighborhood are presently under way. When ELTs will be operational, there will be literally thousands of confirmed planetary systems including spectro-photometric detections. At this point it becomes inevitable to consider the next logical step : the spectroscopic analysis of the atmospheres of these planets. High-resolution spectroscopy, i.e. resolving $v \times \sin (i)$ of these planets, in the wavelength regime of 950-5500nm is a powerful and promising tool. In view of the obvious contrast problems in detecting such planets non-LTE features are specifically targeted. Sensitivity estimates for the detection of the non-thermal OH glow in oxygen-bearing atmospheres are given. With 8m -class telescopes such a search is impossible, but a dedicated spectrograph, e.g. at the projected ESO 100m OWL telescope could detect Earth-like planets at a distance of ${\approx} 10$ parsec. A conceptual design for a dedicated spectrograph, NOCTUA, is presented. In case of ELTs of smaller size the science case changes and the instrument requirements have to be adjusted. Preparatory work with CRIRES, ESO's C ryogenic I nfra r ed E chelle S pectrograph on the VLT at $\frac{\lambda}{\Delta \lambda} \approx 10^5$ as well as other science cases are shortly discussed.

The Multi-Conjugate Adaptive Optics module for the European Extremely Large Telescope has been designed to achieve uniform compensation of the atmospheric turbulence effects on a wide field of view in the near infrared. The design realized in the Phase A of the project is undergoing major revision in order to define a robust baseline in view of the next phases of the project. An overview of the on-going activities is presented.

The Enhanced Resolution Imager and Spectrograph (ERIS) is the new Adaptive Optics based instrument for ESO’s VLT aiming at replacing NACO and SINFONI to form a single compact facility with AO fed imaging and integral field unit spectroscopic scientific channels. ERIS completes the instrument suite at the VLT adaptive telescope. In particular it is equipped with a versatile AO system that delivers up to 95% Strehl correction in K band for science observations up to 5 micron It comprises high order NGS and LGS correction enabling the observation from exoplanets to distant galaxies with a large sky coverage thanks to the coupling of the LGS WFS with the high sensitivity of its visible WFS and the capability to observe in dust embedded environment thanks to its IR low order WFS. ERIS will be installed at the Cassegrain focus of the VLT unit hosting the Adaptive Optics Facility (AOF). The wavefront correction is provided by the AOF deformable secondary mirror while the Laser Guide Star is provided by one of the four launch units of the 4 Laser Guide Star Facility for the AOF. The overall layout of the ERIS AO system is extremely compact and highly optimized: the SPIFFI spectrograph is fed directly by the Cassegrain focus and both the NIX’s (IR imager) and SPIFFI’s entrance windows work as visible/infrared dichroics. In this paper we describe the concept of the ERIS AO system in detail, starting from the requirements and going through the estimated performance, the opto-mechanical design and the Real-Time Computer design.

The Enhanced Resolution Imager and Spectrograph (ERIS) is the next-generation adaptive optics near-IR imager and spectrograph for the Cassegrain focus of the Very Large Telescope (VLT) Unit Telescope 4, which will soon make full use of the Adaptive Optics Facility (AOF). It is a high-Strehl AO-assisted instrument that will use the Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). The project has been approved for construction and has entered its preliminary design phase. ERIS will be constructed in a collaboration including the MaxPlanck Institut fur Extraterrestrische Physik, the Eidgenossische Technische Hochschule Zurich and the Osservatorio Astrofisico di Arcetri and will offer 1 – 5 μm imaging and 1 – 2.5 μm integral field spectroscopic capabilities with a high Strehl performance. Wavefront sensing can be carried out with an optical high-order NGS Pyramid wavefront sensor, or with a single laser in either an optical low-order NGS mode, or with a near-IR low-order mode sensor. Due to its highly sensitive visible wavefront sensor, and separate near-IR low-order mode, ERIS provides a large sky coverage with its 1’ patrol field radius that can even include AO stars embedded in dust-enshrouded environments. As such it will replace, with a much improved single conjugated AO correction, the most scientifically important imaging modes offered by NACO (diffraction limited imaging in the J to M bands, Sparse Aperture Masking and Apodizing Phase Plate (APP) coronagraphy) and the integral field spectroscopy modes of SINFONI, whose instrumental module, SPIFFI, will be upgraded and re-used in ERIS. As part of the SPIFFI upgrade a new higher resolution grating and a science detector replacement are envisaged, as well as PLC driven motors. To accommodate ERIS at the Cassegrain focus, an extension of the telescope back focal length is required, with modifications of the guider arm assembly. In this paper we report on the status of the baseline design. We will also report on the main science goals of the instrument, ranging from exoplanet detection and characterization to high redshift galaxy observations. We will also briefly describe the SINFONI-SPIFFI upgrade strategy, which is part of the ERIS development plan and the overall project timeline.

CUBES is a high-efficiency, medium-resolution (R ≃ 20, 000) spectrograph dedicated to the “ground based UV” (approximately the wavelength range from 300 to 400nm) destined for the Cassegrain focus of one of ESO’s VLT unit telescopes in 2018/19. The CUBES project is a joint venture between ESO and Instituto de Astronomia, Geof´isica e Ciˆencias Atmosf´ericas (IAG) at the Universidade de S˜ao Paulo and the Brazilian Laborat´orio Nacional de Astrofs´ica (LNA). CUBES will provide access to a wealth of new and relevant information for stellar as well as extra-galactic sources. Principle science cases include the study of heavy elements in metal-poor stars, the direct determination of carbon, nitrogen and oxygen abundances by study of molecular bands in the UV range and the determination of the Beryllium abundance as well as the study of active galactic nuclei and the inter-galactic medium. With a streamlined modern instrument design, high efficiency dispersing elements and UV-sensitive detectors, it will enable a significant gain in sensitivity over existing ground based medium-high resolution spectrographs enabling vastly increased sample sizes accessible to the astronomical community. We present here a brief overview of the project, introducing the science cases that drive the design and discussing the design options and technological challenges.

ESPRESSO is the next European exoplanets hunter. It will combine the efficiency of modern echelle spectrograph with extreme radial-velocity precision. It will be installed at Paranal's VLT in order to achieve two magnitudes gain with respect to its predecessor HARPS, and the instrumental radial-velocity precision will be improved to reach 10 cm/s level. We have constituted a Consortium of astronomical research institutes to fund, design and build ESPRESSO on behalf of and in collaboration with ESO, the European Southern Observatory. The project has passed the final design review in May 2013. The spectrograph will be installed at the Combined Coude Laboratory of the VLT, it will be linked to the four 8.2 meters Unit Telescopes through four optical "Coude trains" and will be operated either with a single telescope or with up to four UTs, enabling an additional 1.5 magnitude gain. Thanks to its characteristics and ability of combining incoherently the light of 4 large telescopes, ESPRESSO will offer new possibilities in many fields of astronomy. Our main scientific objectives are, however, the search and characterization of rocky exoplanets in the habitable zone of quiet, near-by G to M-dwarfs, and the analysis of the variability of fundamental physical constants. In this paper, we will present the scientific objectives, the capabilities of ESPRESSO, the technical solutions for the system and its subsystems, enlightening the main differences between ESPRESSO and its predecessors. The project aspects of this facility are also described, from the consortium and partnership structure to the planning phases and milestones.

Observations in seeing limited imaging conditions with an extremely large telescope - such as the European Extremely Large Telescope (E-ELT) - will require large detectors and very fast cameras (around F/1.0). The correction of field curvature is a complex task, requiring numerous optical elements operating with high incidence angles. Large format (60 to 90 mm square) concave detectors with a curvature radius between 500 and 250 mm would considerably simplify the optical design, while improving image quality and cutting cost of optical components. Potential applications are not limited to astronomy exclusively. The associated advantages of curved image sensors inside (mosaicked) focal planes have been described in our paper “The challenge of highly curved monolithic imaging detectors”, presented at SPIE 2010 [1]. This paper compares in a first step important developments in the area of curving CCD and CMOS detectors using different technical approaches linked to specific thinning processes with a novel approach followed after ESO’s initial feasibility study: First results of the latter are described with a report on the chosen curving technology aimed at producing 500 to 250 mm radius of curvature silicon detectors of approximately 60 mm square format (typical astronomical 4k × 4k CCDs). The curvature technique has been developed for front-illuminated devices with the goal of extending the process to back-illuminated sensors in the near future. We will discuss the fabrication process of curving the devices as well as the difficulties encountered during development. Characterization results from a curved detector, including metrology, and electrical performance before and after curvature are presented.

ESPRESSO, the VLT rocky exoplanets hunter, will combine the efficiency of modern echelle spectrograph with extreme radial-velocity precision. It will be installed at Paranal on ESO's VLT in order to achieve a gain of two magnitudes with respect to its predecessor HARPS, and the instrumental radial-velocity precision will be improved to reach 10 cm/s level. We have constituted a Consortium of astronomical research institutes to fund, design and build ESPRESSO on behalf of and in collaboration with ESO, the European Southern Observatory. The project has passed the preliminary design review in November 2011. The spectrograph will be installed at the so-called "Combined Coude Laboratory" of the VLT, it will be linked to the four 8.2 meters Unit Telescopes (UT) through four optical "Coude trains" and will be operated either with a single telescope or with up to four UTs. In exchange of the major financial and human effort the building Consortium will be awarded with guaranteed observing time (GTO), which will be invested in a common scientific program. Thanks to its characteristics and the ability of combining incoherently the light of 4 large telescopes, ESPRESSO will offer new possibilities in many fields of astronomy. Our main scientific objectives are, however, the search and characterization of rocky exoplanets in the habitable zone of quiet, near-by G to M-dwarfs, and the analysis of the variability of fundamental physical constants. In this paper, we present the ambitious scientific objectives, the capabilities of ESPRESSO, the technical solutions for the system and its subsystems, enlightening the main differences between ESPRESSO and its predecessors. The project aspects of this facility are also described, from the consortium and partnership structure to the planning phases and milestones.

At least during the last ten years, the Brazilian astronomical community has been asking for an echelle spectrograph for the 1.6 m telescope installed at Pico dos Dias Observatory (Brazopolis, MG, Brazil, OPD/MCTI/LNA). Among the scientific cases are topics related to the chemical evolution of the Galaxy, asteroseismology, chemical composition and chromospheric activities of solar type stars and the relations between solar analogues and terrestrial planets. During 2009 the project finally got started. The called ECHARPE spectrograph (Espectrografo ECHelle de Alta Resolucao para o telescopio Perkin-Elmer) is being projected to offer a spectral resolution of R ~ 50000, in the range 390-900 nm and with a single exposition. It will be a bench spectrograph with two channels: blue and red, fed by two optical fibers (object, sky or calibration) with aperture of 1.5 or 2.0 arcseconds. The instrument will be placed in one of the telescope pillar ramification, in the originals installations of a Coude spectrograph and in a specially created environment controlled room. In this work we will present the scientific motivations, the conceptual optical design, the expected performance of the spectrograph, and the status of its development. ECHARPE is expected to be delivered to the astronomical community in 2014, fully prepared and optimized for remote operations.

The ESO Adaptive Optics Facility (AOF) consists in an evolution of one of the ESO VLT unit telescopes to a laser driven adaptive telescope with a deformable mirror in its optical train. The project has completed the procurement phase and several large structures have been delivered to Garching (Germany) and are being integrated (the AO modules GRAAL and GALACSI and the ASSIST test bench). The 4LGSF Laser (TOPTICA) has undergone final design review and a pre-production unit has been built and successfully tested. The Deformable Secondary Mirror is fully integrated and system tests have started with the first science grade thin shell mirror delivered by SAGEM. The integrated modules will be tested in stand-alone mode in 2012 and upon delivery of the DSM in late 2012, the system test phase will start. A commissioning strategy has been developed and will be updated before delivery to Paranal. A substantial effort has been spent in 2011-2012 to prepare the unit telescope to receive the AOF by preparing the mechanical interfaces and upgrading the cooling and electrical network. This preparation will also simplify the final installation of the facility on the telescope. A lot of attention is given to the system calibration, how to record and correct any misalignment and control the whole facility. A plan is being developed to efficiently operate the AOF after commissioning. This includes monitoring a relevant set of atmospheric parameters for scheduling and a Laser Traffic control system to assist the operator during the night and help/support the observing block preparation. © (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

MUSE (Multi Unit Spectroscopic Explorer) is a second generation VLT panoramic integral field spectrograph developed for the European Southern Observatory (ESO), operating in the visible and Near Infrared wavelength range (0.465-0.93 μm) with a 1 arcmin square FoV sampled at 0.2arcsec. It is composed of a Calibration unit, a Fore-optics and a Splitting and relay system that feeds 24 identical Integral Field Units (IFU); each one incorporates an advanced image slicer associated with a classical spectrograph. This article will present the optical design choices that have been done to optimize the costs, size and performances of the instrument as well as a detailed ghost images analysis of the whole instrument.

X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope(VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300 to 2500 nm. It is designed to maximize the sensitivity in this spectral range through dichroic splitting in three arms with optimized optics, coatings, dispersive elements and detectors. It operates at intermediate spectral resolution (R~4,000 - 17,000, depending on wavelength and slit width) with fixed echelle spectral format (prism cross-dispersers) in the three arms. It includes a 1.8"x4" Integral Field Unit as an alternative to the 11" long slits. A dedicated data reduction package delivers fully calibrated two-dimensional and extracted spectra over the full wavelength range. We describe the main characteristics of the instrument and present its performance as measured during commissioning, science verification and the first months of science operations., accepted for publication in A&A

ASSIST, The Adaptive Secondary Setup and Instrument STimulator, is being developed to provide a testing facility for the ESO Adaptive Optics Facility (AOF). It will allow the off-telescope testing of three elements of the VLT AOF; the Deformable Secondary Mirror (DSM) and the AO systems for MUSE and HAWK-I (GALACSI and GRAAL). The core of ASSIST consists of a 2-mirror setup (AM1-AM2) allowing the on-axis test of the DSM in interferometric mode. However, during the initial stages of ASSIST integration, DSM would not be present. This makes the task of aligning AM1-AM2 to within an accuracy of 0.05mm/1 arcmin rather challenging. A novel technique known as Shack-Hartmann method has been developed and tested in the lab for this purpose. A Shack Hartmann wavefront sensor will be used to measure the mis-alignment between AM1-AM2 by recording the coma and astigmatism in the presence of large spherical aberration introduced because of tilt/decenter of AM2 with respect to AM1. Thereafter, 20 optical components including lenses, flat mirrors and beam-splitter cubes divided into five sub-assemblies should be aligned to AM1-AM2- DSM axis which ultimately passes through the mechanical axis of large AMOS rotator.

We present the science, design and performances of DIORAMAS, an imager and multi-slit spectrograph for the European Extremely Large Telescope. It covers a wide 6.8x6.8 arcmin² field, a large wavelength range 0.37 to 1.6 microns. The exceptional performances of this concept will enable extremely deep images to magnitudes AB~30 and high multiplex spectroscopy with up to ~500 slits observed simultaneously at spectral resolutions from R~300 to more than 120 slits at R~3000. The technical design is robust with only proven technology, and DIORAMAS could be developed on a timescale compatible with the EELT first light. Keywords : extremely large telescopes, spectroscopy, multi-slit spectroscopy, wide field imager, deep surveys 1. INTRODUCTION The study of first light in the Universe, the seeds of galaxies, as well as the main phases of galaxy evolution are some of the main science goals of the EELT, as identified in the Design Reference Mission (http://www.eso.org/sci/facilities/eelt/science/drm/). The sheer collecting power of the EELT will enable to observe very faint objects, with a gain in performance far superior to the gain when the 8-10m class telescopes surpassed the 4m class. On a point source, with a similar seeing, one can expect a 1.8 magnitude gain with the EELT compared to the VLT, or a factor about 27 in exposure time, a considerable advantage. However, a gain in performance is not only related to the telescope gathering power, but also, for many science investigations, to the capability of assembling large statistically representative samples of stars, galaxies, AGN, or any other (rare) categories of objects in the Universe. If one is able to observe more than one object at once, the performance gain is proportional to the number of objects observed simultaneously, and a key instrument driver is the size of the field of view adapted to the science. Large wide field imagers have been very powerful even on smaller telescopes (e.g. CFHT, VISTA, PanStarrs, soon VST, leading to LSST), where the etendue A : combining the aperture of the telescope

MUSE (Multi Unit Spectroscopic Explorer) is a second generation VLT panoramic integral field spectrograph developed for the European Southern Observatory (ESO), operating in the visible wavelength range (0.465-0.93 μm). It is composed of 24 identical Integral Field Units (IFU); each one incorporates an advanced image slicer associated with a classical spectrograph and a detector vessel. The Image Slicer subsystem -ISS- is composed of two mirror arrays of 48 spherical elements each. It is made of Zerodur and uses an innovative polishing approach where all individual components are polished together by classical method. The MUSE Spectrograph -SPS-, with fast output focal ratio of f/1.95, implements a Volume Phase Holographic Grating - VPHG. The last subsystem, the Detector Vessel -DV- includes a chip of 4k by 4k 15μm pixels supported by a Vacuum and Cryogenic System - VCS - provided by ESO. The first out of 24 IFUs for MUSE instrument has been manufactured, aligned and tested last months. First, this paper describes the optical design, the manufacturing and test results (image quality, pupil and field of view positioning) of each subsystem independently. Second, we will focus on overall system performance (image quality and positioning) of the spectrograph associated with the detector vessel. At the end, the test results (image quality, positioning, throughput, mechanical interfaces) of the first IFU for MUSE instrument will be reported. Most of them are compliant with requirements that it demonstrates that the manufacturing, integration, alignment and tests processes are mature and gives good confidence for serial production by 24 times applied to MUSE instrument.

The Multi-conjugate Adaptive Optics RelaY (MAORY) for the European Extremely Large Telescope (E-ELT) provides a corrected field of view of up to 2 arcmin diameter over the wavelength range 0.8-2.4 μm. It is expected to achieve a correction of high quality and uniformity with high sky coverage: with a seeing of 0.8 arcsec in the visible, the expected Strehl Ratio averaged over a 1 arcmin field is approximately 50% at 2.16 μm wavelength over 50% of the sky at the Galactic Pole. Wavefront correction is obtained by means of the E-ELT adaptive mirrors M4/M5 and of two post-focal deformable mirrors conjugated at 4km and 12.7km from the telescope pupil. Wavefront sensing is performed by 6 Sodium laser guide stars and by 3 natural guide stars, used to measure atmospheric and windshake tilt and to provide a reference for the focus and for the low-order aberrations induced by the Sodium layer. MAORY is located on the E-ELT Nasmyth platform and has a gravity invariant port, feeding the high angular resolution camera MICADO, and a lateral port for a detached instrument as the infrared spectrograph SIMPLE.

ESPRESSO, the Echelle SPectrograph for Rocky Exoplanets and Stable Spectroscopic Observations, will combine the efficiency of modern echelle spectrograph design with extreme radial-velocity precision. It will be installed on ESO's VLT in order to achieve a gain of two magnitudes with respect to its predecessor HARPS, and the instrumental radialvelocity precision will be improved to reach cm/s level. Thanks to its characteristics and the ability of combining incoherently the light of 4 large telescopes, ESPRESSO will offer new possibilities in various fields of astronomy. The main scientific objectives will be the search and characterization of rocky exoplanets in the habitable zone of quiet, nearby G to M-dwarfs, and the analysis of the variability of fundamental physical constants. We will present the ambitious scientific objectives, the capabilities of ESPRESSO, and the technical solutions of this challenging project.

In a recent optical design study of CODEX - a visible spectrograph planned for the European Extremely Large Telescope (E-ELT) - it was determined that a significant simplification of the optical design - accompanied by an improvement of the image quality - could be achieved through the application of large format (90mm square) concave spherically curved detectors with a low radius of curvature (500 to 250mm). Current assemblies of image sensors and optics rely on the optics to project a corrected image onto a flat detector. While scientific large-size CCDs (49mm square) have been produced unintentionally with a spherical radius of convex curvature of around 5m, in the past most efforts have concentrated onto flattening the light-sensitive detector silicon area as best as possible for both scientific state-of-the-art systems, as well as commercial low-cost consumer products. In some cases curved focal planes are mosaicked out of individual flat detectors, but a standard method to derive individual spherically curved large size detectors has not been demonstrated. This paper summarizes important developments in the area of curved detectors in the past and their different technical approaches mostly linked to specific thinning processes. ESO's specifications for an ongoing feasibility study are presented. First results of the latter are described with a link to theoretical and practical examinations of currently available technology to implement curved CCD and CMOS detectors for scientific applications.

The testing and verification of ESO Very Large Telescope Adaptive Optics Facility (VLT-AOF) requires new and innovative techniques to deal with the absence of an intermediate focus on the telescope. ASSIST, The Adaptive Secondary Setup and Instrument STimulator, was developed to provide a testing facility for the ESO AOF and will allow off-telescope testing of three elements of the VLT Adaptive Optics Facility; the Deformable Secondary Mirror (DSM) and the AO systems for MUSE and HAWK-I (GALACSI and GRAAL). ASSIST will provide a full testing environment which includes an interferometric testing mode for the DSM, an on-axis testing mode with a single wavefront sensor and full operation testing modes for both the AO systems. Both natural as well as laser guide stars will be simulated under various asterisms and a realistic turbulent atmosphere will be provided for varying atmospheric conditions. ASSIST passed its final design review and is now being manufactured, integrated and tested and will be operational in mid 2011, in time for first testing with the DSM.

MAORY, the Multi-conjugated Adaptive Optics RelaY for the European Extremely Large Telescope, will be located on one of the Nasmyth platforms of the telescope to provide multi conjugated adaptive optics correction of the wavefront. The scientific instruments fed by the module will benefit from a corrected field of view of 2 arcmin diameter with high performance uniformity across the field. The two post-focal deformable mirrors are projected at high altitude by the optical system based on 5 mirrors and one dichroic which splits the laser light of the artificial reference stars from the science channel. The third deformable mirror, conjugated to the ground, is integrated into the telescope. Six laser guide stars are foreseen in order to measure the wavefront distortions and three natural guide stars are used to solve the tip-tilt indetermination problem. The natural guide stars wavefront sensors are located close to the output focal plane in order to minimize the non common path aberrations. Two output ports are foreseen: one gravity invariant located below the optical bench and one on one side of the bench to feed large instruments placed on the Nasmyth platform.

International audience; MAORY is the Multi-conjugate Adaptive Optics RelaY module for the European Extremely Large Telescope. It will be located on the Nasmyth platform of the telescope to feed scientific instruments. The module is supposed to re-image one to one the telescope focal plane with diffraction limited optical quality and to provide multi-conjugate adaptive optics correction of the wavefront distortion induced by the atmosphere. The system is based on six laser guide stars for sensing the wavefront distortion and three deformable mirrors for correcting it. A dichroic is used to split the laser light from the light of the scientific and natural guide stars channel. Two output ports, selected by the dichroic orientation, are foreseen: one in a gravity invariant configuration and one in a vertical position to feed large instruments. In this article the current optical and mechanical design are presented together with the thermal analysis.

An image slicer breadboard has been designed, manufactured and tested for MUSE (Multi Unit Spectroscopic Explorer) instrument, a second generation integral field spectrograph developed for the European Southern Observatory (ESO) for the VLT. MUSE is operating in the visible and near IR wavelength range (0.465-0.93 μm) and is composed of 24 identical Integral Field Units; each one incorporates an advanced image slicer associated with a classical spectrograph. This paper describes the original optical design, the manufacturing, component test results (shape, roughness, reflectivity, microscopic visualization) and overall system performance (image quality, alignment) of the image slicer breadboard. This one is a combination of two mirror arrays of 48 elements each. It is made of Zerodur and uses a new polishing approach where all individual optical components are polished together by classical method. This image slicer constitutes the first one which has the largest number of active slices (48) associated with strict tolerances in term of positioning. The main results of the tests on this image slicer breadboard will then be presented. Most of them are compliant with requirements. This demonstrates that the manufacturing process is mature and gives good confidence for serial production applied to MUSE instrument.

MAORY, the multi-conjugate adaptive optics module for the E-ELT, is supposed to be placed in one of the two Nasmyth platforms of the telescope, re-imaging the focal plane with a diffraction limited image quality. The requested operating wavelength is from 0.6 to 2.4μm with a high throughput. The module will include a natural guide stars wave front sensor (NGS WFS) and a laser guide stars WFS (LGS WFS) and will feed at least two scientific instruments with a corrected field of view up to 2 arcmin, providing a mechanical de-rotation for the light instruments attached (< 4tons). We present below a preliminary optical design of the post focal relay taking count of the required performance. A particular attention is paid to the critical aspects such as the pupil de-rotation, the light splitting between the WFSs and the scientific channel and the deformable mirrors (DMs) optical parameters and dimensioning.

To achieve very-high spectral resolutions (R>100,000) with large telescopes (D>8m) new optical solutions have been investigated in the context of the ESPRESSO project for the VLT, starting from the initial design of CODEX for the E-ELT. ESPRESSO is a high-efficiency, high-stability, high-resolution visible spectrograph for the combined Coude focus of the VLT. Among these new solutions, we can mention: free-form optics, used to design an all-mirror anamorphic pupil slicer, large mosaic echelle grating, slanted VPH gratings, super-corrected atmospheric dispersion corrector. All these solutions have been usefully applied to design the spectrograph for ESPRESSO, and its Coude relay system.

CRIRES is a cryogenic, pre-dispersed, infrared Echelle spectrograph designed to provide a nominal resolving power ν/Δν of 105 between 1000 and 5000 nm for a nominal slit width of 0.2". The CRIRES installation at the Nasmyth focus A of the 8-m VLT UT1 (Antu) marks the completion of the original instrumentation plan for the VLT. A curvature sensing adaptive optics system feed is used to minimize slit losses and to provide 0.2" spatial resolution along the slit. A mosaic of four Aladdin InSb-arrays packaged on custom-fabricated ceramic boards has been developed. It provides for an effective 4096 × 512 pixel focal plane array to maximize the free spectral range covered in each exposure. Insertion of gas cells is possible in order to measure radial velocities with high precision. Measurement of circular and linear polarization in Zeeman sensitive lines for magnetic Doppler imaging is foreseen but not yet fully implemented. A cryogenic Wollaston prism on a kinematic mount is already incorporated. The retarder devices will be located close to the Unit Telescope focal plane. Here we briefly recall the major design features of CRIRES and describe the commissioning of the instrument including a report of extensive testing and a preview of astronomical results.

The Multi-Conjugate Adaptive Optics Demonstrator (MAD) built by ESO with the contribution of two external consortia is a powerful test bench for proving the feasibility of Multi-Conjugate (MCAO) and Ground Layer Adaptive Optics (GLAO) techniques both in the laboratory and on the sky. MAD is based on a two deformable mirrors correction system and on two multi-reference wavefront sensors (Star Oriented and Layer Oriented) capable to observe simultaneously some pre-selected configurations of Natural Guide Stars. MAD corrects up to 2 arcmin field of view in K band. After a long laboratory test phase, it has been installed at the VLT and it successfully performed on-sky demonstration runs on several astronomical targets for evaluating the correction performance under different atmospheric turbulence conditions. In this paper we present the results obtained on the sky in Star Oriented mode for MCAO and GLAO configurations and we correlate them with different atmospheric turbulence parameters. Finally we compare some of the on-sky results with numerical simulations including real turbulence profile measured at the moment of the observations.

A comprehensive suite of Adaptive Optics systems and AO-assisted instruments is currently under development for the VLT and will be built around a hyperbolic convex adaptive Deformable Secondary Mirror (DSM). In telescopes with such a secondary mirror, test and calibration of both the DSM and the science instruments using it are notoriously expensive and time-consuming. The Adaptive Secondary Setup and Instrument Stimulator (ASSIST) is being developed to allow test and integration of three key elements of the future VLT Adaptive Telescope Facility: the DSM and 2 instrument-specific adaptive optics systems (GALACSI for MUSE and GRAAL for HAWK-I). The core of ASSIST is a standalone interferometric test setup for the DSM allowing its test at its center of curvature (significantly reducing the size of the classical hyperbole focii test configuration). This setup is completed by a star simulator for both natural and laser guide stars, a turbulence generator (for realistic AO performance measurements), a corrector system generating a VLT-like exit pupil and a Nasmyth rotator simulator interfacing with the two AO systems. In this paper we present the optical architecture of ASSIST, detailing the current design of the different parts of the system, and discuss its projected performance and compliance with the test and calibration requirements.

HAWK-I is a new wide-field infrared camera under development at ESO. With four Hawaii-2RG detectors, a 7.5 arcminute square field of view and 0.1 arcsecond pixels, it will be an optimum imager for the VLT, and a major enhancement to existing and future infrared capabilities at ESO. HAWK-I will eventually make use of ground-layer AO achieved through a deformable secondary mirror/laser guide star facility planned for the VLT.

In telescopes with a Deformable Secondary Mirror, the testing and calibration of both the DSM itself as well as the instruments using this DSM are expensive and time consuming processes. Especially in telescopes without an intermediate focus before the DSM, a number of calibrations can only be performed on a real star during night time. A full suite of Adaptive Optics systems and AO-assisted instruments is currently under development for the VLT, also know as the VLT Adaptive Telescope. ASSIST was developed to assist in the integration and testing of three elements of the VLT Adaptive Telescope Facility; the DSM; the MUSE AO system 'GALACSI' and the HAWK-I AO system 'GRAAL.' The core of ASSIST is a support infrastructure to integrate the DSM in a compact and stable test setup. A Nasmyth rotator simulator will be provided for attaching the two AO systems, while ASSIST will be fed by a star simulator and turbulence generator for realistic performance measurements of both the DSM as well as the AO system under test. An on-axis high-speed interferometer will be used for additional testing of the functional operation of the DSM. In this paper we present the requirements and design of ASSIST and the projected performance of the test bench for both the testing and calibration of the DSM as well as for the two AO systems under test.

Glass and metallic image slicer breadboards have been designed, manufactured and tested for MUSE (Multi Unit Spectroscopic Explorer) instrument, a second generation integral field spectrograph developed for the European Southern Observatory (ESO) for the VLT. MUSE is operating in the visible and near IR wavelength range (0.465-0.93 μm) and is composed of 24 identical integral field units; each one incorporates an advanced image slicer associated with a classical spectrograph. This presentation describes the optical design, the manufacturing, component test results (shape, roughness, Bidirectional Reflection Distribution Function - BRDF) and overall system performance (image quality, alignment) of two image slicer breadboards. The first one is made of Zerodur and uses individual optical components polished by a classical method and assembled together by molecular adhesion. This breadboard is a combination of mirrors and mini-lens arrays. The second one is made of metal (copper or invar) using monolithic or segmented optical elements and state-ofthe- art diamond-turning machines. It is composed of two sets of reflective mirrors. We will then conclude with a comparison between these two different breadboards by choosing the most suitable solution for the 24 MUSE image slicers.

The Multi-Conjugate Adaptive Optics Demonstrator (MAD) built by ESO with the contribution of two external consortia is a powerful test bench for proving the feasibility of Ground Layer (GLAO) and Multi-Conjugate Adaptive Optics (MCAO) techniques both in the laboratory and on the sky. The MAD module will be installed at one of the VLT unit telescope in Paranal observatory to perform on-sky observations. MAD is based on a two deformable mirrors correction system and on two multi-reference wavefront sensors (Star Oriented and Layer Oriented) capable to observe simultaneously some pre-selected configurations of Natural Guide Stars. MAD is expected to correct up to 2 arcmin field of view in K band. MAD is completing the test phase in the Star Oriented mode based on Shack-Hartmann wavefront sensing. The GLAO and MCAO loops have been successfully closed on simulated atmosphere after a long phase of careful system characterization and calibration. In this paper we present the results obtained in laboratory for GLAO and MCAO corrections testing with bright guide star flux in Star Oriented mode paying also attention to the aspects involving the calibration of such a system. A short overview of the MAD system is also given.

The Multi Unit Spectroscopic Explorer (MUSE) is a second-generation VLT panoramic integral-field spectrograph under preliminary design study. MUSE has a field of 1x1 arcmin**2 sampled at 0.2x0.2 arcsec**2 and is assisted by the VLT ground layer adaptive optics ESO facility using four laser guide stars. The simultaneous spectral range is 465-930 nm, at a resolution of R~3000. MUSE couples the discovery potential of a large imaging device to the measuring capabilities of a high-quality spectrograph, while taking advantage of the increased spatial resolution provided by adaptive optics. This makes MUSE a unique and tremendously powerful instrument for discovering and characterizing objects that lie beyond the reach of even the deepest imaging surveys. MUSE has also a high spatial resolution mode with 7.5x7.5 arcsec**2 field of view sampled at 25 milli-arcsec. In this mode MUSE should be able to obtain diffraction limited data-cubes in the 600-930 nm wavelength range. Although the MUSE design has been optimized for the study of galaxy formation and evolution, it has a wide range of possible applications; e.g. monitoring of outer planets atmosphere, environment of young stellar objects, super massive black holes and active nuclei in nearby galaxies or massive spectroscopic surveys of stellar fields in the Milky Way and nearby galaxies., Astronomical Telescopes and Instrumentation, SPIE 6265 Orlando 24-31May 2006 9 pages