Search

Inland waters are important sources of the greenhouse gasses (GHGs) carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) to the atmosphere. While a growing number of global estimates of inland water GHG emissions exists, the integration of inland waters into regional GHG budgets is often hampered by the lack of adequate geo-spatial datasets. Moreover, existing estimates diverge substantially, in part due to persisting uncertainties related to the size and distribution of effective inland water surface areas. In the framework of the 2nd phase of the REgional Carbon Cycle Assessment and Processes (RECCAP-2) initiative, we synthesize existing estimates of GHG emissions from streams, rivers, lakes and reservoirs, and homogenize them with regard to underlying global maps of inland water surface areas and the effects of seasonal ice cover. We then produce estimates of inland water GHG emissions for 10 extensive land regions that are used for the regional land budgets of RECCAP2. According to our synthesis, global inland waters emit 5.6 (3.5-9.1) Pg CO2 yr-1, 101 (83-135) Tg CH4 yr-1 and 326 (254-592) Gg N2O yr-1. South American rivers contribute about one third of global inland water CO2 emissions. North-American and Russian lakes contribute together one third of global inland water CH4 emissions. Finally, North America alone contributes one fourth of global inland water N2O emissions.The global inland water emissions sum up to a global warming potential (GWP) of an equivalent emission of 13.6 (10.0-20.3) and 8.3 (5.8-12.7) Pg CO2 yr-1 at a 20- and 100-year horizon, respectively. At 100-year horizon, the contribution of CO2 dominates the GWP of global inland water GHG emissions, with rivers being the largest emitters. At the 20-year horizon, on the contrary, lakes and rivers are equally important emitters, and the contributions of CH4 to the GWP of inland water GHG emissions even exceed those of CO2. Contributions of N2O to the GWP appear to be less significant at both time horizons. Normalized to the area of the RECCAP-2 land regions, South America and South East Asia show the highest inland water emission rates in terms of GWP, dominated by riverine CO2 emissions.

HydroSHEDS is a well-established database containing global hydrographic information. Although being widely used, the SRTM-based version 1 of HydroSHEDS has important limitations, in particular in areas above 60° N latitude. The coverage of this region is of low quality because no underpinning SRTM elevation data were available. As most hydrological models require topographic information and hydrographic data in terms of stream networks or catchment boundaries, the increased availability of accurate remote sensing data promotes the development of a second and refined version of the HydroSHEDS database. For this reason, HydroSHEDS v2 is currently created in collaboration between the German Aerospace Center (DLR), McGill University, Confluvio Consulting and the World Wildlife Fund. Foundation of HydroSHEDS v2 is the digital elevation model (DEM) of the TanDEM-X mission (TerraSAR-X add-on for Digital Elevation Measurement). This 0.4 arc-second resolution DEM with global coverage of land surfaces was created in partnership between DLR and Airbus Defence and Space. Enhanced pre-processing techniques are applied to preserve details of the high-resolution DEM in its hydrologically conditioned version. These pre-processing steps include an infill of invalid and unreliable elevation values, an automatic coastline delineation refined with manual corrections, an AI-based water detection algorithm, and a modification of elevation data in urban and vegetated areas for improved evaluation of the flow of water. Additionally, experiences and preliminary results from processing the water body mask at global scale are outlined. The hydrologically pre-conditioned DEM and the water body mask derived from the TanDEM-X dataset are in the subsequent steps further processed with refined hydrological optimization and correction algorithms to derive flow direction and flow accumulation maps. These gridded datasets are the core products of HydroSHEDS v2 and will be complemented with secondary information on river networks, lake shorelines, catchment boundaries, and their hydro-environmental attributes in vector format. The main release of HydroSHEDS v2 is scheduled for 2023 under a free license.

The main objective of wastewater treatment plants (WWTPs) is to remove pathogens, nutrients, organics, and other pollutants from wastewater. After these contaminants are partially or fully removed through physical, biological, and/or chemical processes, the treated effluents are discharged into receiving waterbodies. However, since WWTPs cannot remove all contaminants, especially those of emerging concern, they inevitably represent concentrated point sources of residual contaminant loads into surface waters. To understand the severity and extent of the impact of treated-wastewater discharges from such facilities into rivers and lakes, as well as to identify opportunities of improved management, detailed information about WWTPs is required, including (1) their explicit geospatial locations to identify the waterbodies affected and (2) individual plant characteristics such as the population served, flow rate of effluents, and level of treatment of processed wastewater. These characteristics are especially important for contaminant fate models that are designed to assess the distribution of substances that are not typically included in environmental monitoring programs. Although there are several regional datasets that provide information on WWTP locations and characteristics, data are still lacking at a global scale, especially in developing countries. Here we introduce a spatially explicit global database, termed HydroWASTE, containing 58 502 WWTPs and their characteristics. This database was developed by combining national and regional datasets with auxiliary information to derive or complete missing WWTP characteristics, including the number of people served. A high-resolution river network with streamflow estimates was used to georeference WWTP outfall locations and calculate each plant's dilution factor (i.e., the ratio of the natural discharge of the receiving waterbody to the WWTP effluent discharge). The utility of this information was demonstrated in an assessment of the distribution of treated wastewater at a global scale. Results show that 1 200 000 km of the global river network receives wastewater input from upstream WWTPs, of which more than 90 000 km is downstream of WWTPs that offer only primary treatment. Wastewater ratios originating from WWTPs exceed 10 % in over 72 000 km of rivers, mostly in areas of high population densities in Europe, the USA, China, India, and South Africa. In addition, 2533 plants show a dilution factor of less than 10, which represents a common threshold for environmental concern. HydroWASTE can be accessed at https://doi.org/10.6084/m9.figshare.14847786.v1 (Ehalt Macedo et al., 2021).

The present research proposes a two-step physics- and machine-learning(ML)-based electromechanical impedance (EMI) measurement data evaluation approach for sandwich face layer debonding detection and size estimation in structural health monitoring (SHM) applications. As a case example, a circular aluminum sandwich panel with idealized face layer debonding was used. Both the sensor and debonding were located at the center of the sandwich. Synthetic EMI spectra were generated by a finite-element(FE)-based parameter study, and were used for feature engineering and ML model training and development. Calibration of the real-world EMI measurement data was shown to overcome the FE model simplifications, enabling their evaluation by the found synthetic data-based features and models. The data preprocessing and ML models were validated by unseen real-world EMI measurement data collected in a laboratory environment. The best detection and size estimation performances were found for a One-Class Support Vector Machine and a K-Nearest Neighbor model, respectively, which clearly showed reliable identification of relevant debonding sizes. Furthermore, the approach was shown to be robust against unknown artificial disturbances, and outperformed a previous method for debonding size estimation. The data and code used in this study are provided in their entirety, to enhance comprehensibility, and to encourage future research. Version of record

Assigning formal protection status to watersheds can help secure water quality. However, little is known about what spatial proportion of a watershed should be protected, what type of forma...

Although the network of national parks in Zambia offers a degree of protection for freshwater diversity, the protection status of numerous systems outside of these parks requires further action. The biodiversity associated with its freshwater systems, both lotic and lentic, is unique, covering a climatic gradient from tropical to subtropical across the Zambezi and Congo basins. Recent Zambian legislation allows for the delineation of water resource protection areas (WRPAs), with one of the criteria being that they include aquatic areas of ecological importance (AEIs). In this study, a systematic conservation planning approach was used to identify aquatic AEIs objectively. Importantly, the approach included a rigorous and iterative stakeholder engagement and review process. The conservation planning software marxan was chosen because of its ability to integrate upstream–downstream connectivity. In total, 5,671 planning units (sub-catchments with an average area of approx. 14,000 ha) were populated with 77 biodiversity features: data were drawn from a wide range of sources, and included fishes, semi-aquatic mammals, molluscs, amphibians, and ecotonal physiographic features, such as waterfalls. Sub-catchments were preferentially chosen using a combination of area- and distance-weighted boundary costs. The final solution highlights critical clusters in each of the major freshwater ecoregions in Zambia, with all conservation targets being met. Results show that although the existing protected area network also coincides with identified aquatic AEIs, approximately 80% of all aquatic AEIs fall outside of formally protected areas. The outcomes of this process serve as one of three prioritization layers (the other two being water provision and sensitivity to human impacts) that are integrated in a larger study to select and prioritize WRPAs.

SummaryClimate change presents a particularly complex challenge in the context of flyway scale conservation of migratory bird species as it requires coordinated action by multiple countries along these species’ migratory routes. Coordinating conservation responses requires understanding the vulnerability of species and their habitats to climate change at the flyway scale throughout each species’ annual cycle. To contribute to such understanding, we used species distribution models to assess the exposure to climate change of waterbird species that are the focus of the Agreement on the Conservation of African-Eurasian Migratory Waterbirds (AEWA). We found that the species with the smallest proportion of their current range projected to be climatically suitable by 2050 (those whose distributions respond to changes in water availability but that do not perform synchronised migration) are dispersive species in the Afrotropical biogeographic realm, and migratory species in their breeding season, particularly Arctic breeding waders. These species also have the most limited availability of newly suitable areas. Projections for most other Palearctic migratory waterbird species suggest that losses of suitable areas in their current passage and wintering ranges may be largely offset by new areas becoming climatically suitable. The majority of migratory Palearctic waterbirds in the breeding season and Afrotropical waterbirds are widely dispersed with only a small proportion of their populations currently supported by ‘Critical Sites’ (i.e. sites that are either important for Globally Threatened Species or support 1% of the bioregional population of any waterbird species). This makes it unlikely that climate change adaptation measures focusing only on key sites will be sufficient to counter the predicted range losses. Therefore, climate change adaptation responses should also be implemented at the landscape scale for Afrotropical waterbirds and for breeding populations of Palearctic migrant waterbirds.

For many decades, sediment yield (SY) observations have been collected around the world to analyze, monitor, and better understand the state and dynamics of various Earth system processes. These records are highly relevant for a wide variety of research applications, yet they remain poorly accessible, especially for large-scale studies. A main reason for this is the fact that many of these measurements are collected on an isolated basis, leading to inconsistencies across data sets. SY observations also suffer from large uncertainties in data quality: key factors such as location accuracy, sampling method and frequency, measuring period, and others vary greatly but are not systematically reported.To address these shortcomings and provide a standardized global reference for SY data, we are developing an extensive, coherent and georeferenced global database of contemporary SY observations. Through an extensive review of (grey) literature and contacts with numerous research groups, we already compiled SY observations for >8,000 catchments worldwide (comprising a total of >80,000 catchment years of observations). These observations are either derived from gauging station measurements or reservoir sedimentation rates. We assess the reliability of SY records and provide data quality indices based on available information such as measuring location, reported catchment area, sampling method and frequency, and measuring period. We further link the SY observations to the HydroSHEDS global river network, making them readily accessible and consistent with a wide array of hydro-environmental catchment variables also connected to the HydroSHEDS network. This new global SY database creates untouched opportunities for large-scale model development and statistical analyses of sediment-related factors and processes, such as soil erosion, sediment budgets, land cover and land use change impacts, or hydrological and sediment connectivity. Here we present a first overview of the data collected so far, its spatial patterns and its research potential.

Climate change is altering the hydrology of Canadian rivers to an unprecedented degree. Consequently, sustainable freshwater management practices need to adapt, which include the development of integrated water resource strategies and environmental flow recommendations. A particular challenge arises for these assessments due to the highly diverse nature of river ecosystems across Canada. This diversity can be addressed by using a classification system to create manageable spatial units. Building upon and adapting the results of a global river reach classification scheme, we present a multidisciplinary K-means clustering approach to categorize all river reaches of Canada into 23 types at fine spatial resolution. The typology is based on classifier variables related to hydrology, mostly derived from modelled long-term means of monthly discharges, physiography, climate, and fluvial geomorphology. Resulting maps provide baseline information for rivers of all size classes, from small headwater streams to very large rivers, across the entire country, including unmonitored regions such as the High Arctic. The classification system also points to some strategic expansion opportunities for the current Canadian monitoring network of river gauging stations.

The main objective of wastewater treatment plants (WWTPs) is to remove contaminants such as pathogens, nutrients, and organic and other pollutants from wastewaters using physical, biological and/or chemical processes prior to discharge into receiving waterbodies. However, since WWTPs cannot remove all contaminants, they inevitably represent concentrated point sources of residual contaminant loads into surface waters. To understand the severity and extent of the impact of wastewater discharges from such facilities into rivers and lakes, as well as to identify opportunities of improved management, detailed information about WWTPs is required, including (1) their explicit geospatial locations to identify the waterbodies affected; and (2) individual plant characteristics such as population served, flow rate of effluents, and level of treatment of processed wastewaters. These characteristics are especially important for contaminant fate models that are designed to assess the distribution of substances that are not typically included in environmental monitoring programs, such as contaminants of emerging concern. Although there are several regional datasets that provide information on WWTP locations and characteristics, data are still lacking at a global scale, especially in developing countries. Here we introduce HydroWASTE, a location-explicit global database of 58,502 WWTPs and their characteristics. This database was developed by combining national and regional datasets with auxiliary information to derive or complete missing WWTP characteristics, including the amount of people served. A high-resolution river network with streamflow estimates was used to georeference WWTP outfall locations and calculate each plant’s dilution factor (i.e., the ratio of the natural discharge of the receiving waterbody to the WWTP effluent discharge). The utility of this information was demonstrated in an assessment of the distribution of wastewaters at a global scale. Results show that 1.2 million kilometers of the global river network receive wastewater input from upstream WWTPs, of which more than 90,000 km are downstream of WWTPs that offer only primary treatment. Wastewater ratios originating from WWTPs exceed 10 % in over 72,000 km of rivers, mostly in areas of high population densities in Europe, USA, China, India, and South Africa. In addition, 2,533 plants show a dilution factor of less than 10, which represents a common threshold for environmental concern.

Despite their importance for biodiversity and ecosystem services, wetlands are among the most threatened ecosystems globally. The conservation of many migratory waterbirds depends on the conservation of a network of key sites along their flyways. However, the suitability of these sites is changing under climate change, and it is important that management of individual sites in the network adapts to these changes. Using bioclimatic models that also account for changes in inundation, we found that projected climate change will reduce habitat suitability for waterbirds at 57.5% of existing Critical Sites within Africa-Eurasia, varying from 20.1% in Eastern Europe to 87.0% in Africa. African and Middle East sites are particularly threatened, comprising 71 of the 100 most vulnerable sites. By highlighting priority sites for conservation and classifying Critical Sites into Climate Change Adaptation Strategy (CCAS) classes, our results can be used to support the climate change adaptation of both individual sites and the entire site network.

Water insecurity is a defining feature of the Anthropocene, with degraded water quality and unreliable flows putting the well‐being of upstream and downstream communities, both human and aquatic, at risk. Within this context, the protection of drinking water at its source – ‘source water protection’ – is growing as a complementary water security solution to conventional built infrastructure, particularly but not only to address non‐point source pollution. An assessment of the likely source catchments of 4000 cities, supplying water to as many as 1.7 billion city dwellers, found that 85% of the total area of the catchments overlaps with freshwater ecoregions of high biodiversity value. Source water protection could contribute to conserving important freshwater biodiversity elements in these catchments, through activities such as land protection, restoration, and agricultural and ranching best‐management practices. Empirical evidence supporting the benefits of these types of activities to freshwater species and ecosystems is sparse, especially when considered at the scales required to achieve meaningful conservation objectives. This article explores the potential of source water protection to deliver freshwater conservation benefits, and solutions are proposed to address the challenges related to evidence gaps, trade‐offs, and financing. The broader opportunity for leveraging water security investments for biodiversity conservation, and the overall efficiencies that may accrue from optimizing for multiple benefits simultaneously, are discussed in the context of global frameworks such as the Sustainable Development Goals.

Humans have devised a vast array of musical instruments, but the most prevalent instrument remains the human voice. Thus, techniques for applying audio signal processing methods to the singing voice are receiving much attention as the world continues to move toward music-streaming services and as researchers seek to unlock the deep content understanding necessary to enable personalized listening experiences on a large scale. This article provides an introduction to the topic of singing-voice analysis. It surveys the foundations and state of the art in computational modeling across three main categories of singing: general vocalizations, the musical function of voice, and the singing of lyrics. We aim to establish a starting point for practitioners new to this field and frame near-field opportunities and challenges on the horizon.

Since its introduction in 2008, the HydroSHEDS database (www.hydrosheds.org) has transformed large-scale hydro-ecological research and applications worldwide by offering standardized spatial units for hydrological assessments. At its core, HydroSHEDS provides digital hydrographic information that can be applied in Geographic Information Software (GIS) or hydrological models to delineate river networks and catchment boundaries at multiple scales, from local to global. Its various data layers form the basis for applications in a wide range of disciplines including environmental, conservation, socioeconomic, human health, and sustainability studies.Version 1 of HydroSHEDS was derived from the digital elevation model of the Shuttle Radar Topography Mission (SRTM) at a pixel resolution of 3 arc-seconds (~90 meters at the equator). It was created using customized processing and optimization algorithms and a high degree of manual quality control. Results are available at varying resolutions, ranging from 3 arc-seconds (~90 m) to 5 minutes (~10 km), and in nested sub-basin structures, making the data uniquely suitable for applications at multiple scales. A suite of related data collections and value-added information, foremost the HydroATLAS compilation of over 50 hydro-environmental attributes for every river reach and sub-basin, continuously enhance the versatility of the HydroSHEDS family of products. Yet version 1 of HydroSHEDS shows some important limitations. In particular, coverage above 60° northern latitude (i.e., largely the Arctic) is missing for the 3 arc-second product and is of low quality for coarser products because no SRTM elevation data are available for this region. Also, some areas are affected by inherent data gaps or other errors that could not be fully resolved at the time of creating version 1 of HydroSHEDS.Today, the TanDEM-X dataset (TerraSAR-X add-on for Digital Elevation Measurement), created in partnership between the German Aerospace Agency (DLR) and Airbus, offers a new digital elevation model covering the entire global land surface including northern latitudes. In a collaborative project, this dataset is used to extract HydroSHEDS v2.0, following the same basic specifications as version 1. DLR is processing the original 12 m resolution TanDEM-X data to create a hydrologically pre-conditioned version at 3 arc-second resolution. In this step, corrections with high-resolution vegetation and settlement maps are applied to reduce distortions caused by vegetation cover and in built-up areas. Following this preprocessing, refined hydrological optimization and correction algorithms are used to derive the drainage pathways, including improved ‘stream-burning’ techniques that incorporate recent data products such as high-resolution terrestrial open water masks and improved tracing of drainage pathways as center lines in global lake and river maps. The resulting HydroSHEDS v2.0 database will provide river networks and catchment boundaries at full global coverage. Release of the data under a free license is scheduled for 2022, with regions above 60° northern latitude being completed first in 2021.