Search

Context: Hypothetically, topiramate can improve drinking outcomes among alcohol-dependent individuals by reducing alcohol's reinforcing effects through facilitation of gamma-aminobutyric acid function and inhibition of glutaminergic pathways in the corticomesolimbic system.Objective: To determine if topiramate is a safe and efficacious treatment for alcohol dependence.Design, Setting, and Participants: Double-blind, randomized, placebo-controlled, 14-week trial of 371 men and women aged 18 to 65 years diagnosed with alcohol dependence, conducted between January 27, 2004, and August 4, 2006, at 17 US sites.Interventions: Up to 300 mg/d of topiramate (n = 183) or placebo (n = 188), along with a weekly compliance enhancement intervention.Main Outcome Measures: Primary efficacy variable was self-reported percentage of heavy drinking days. Secondary outcomes included other self-reported drinking measures (percentage of days abstinent and drinks per drinking day) along with the laboratory measure of alcohol consumption (plasma gamma-glutamyltransferase).Results: Treating all dropouts as relapse to baseline, topiramate was more efficacious than placebo at reducing the percentage of heavy drinking days from baseline to week 14 (mean difference, 8.44%; 95% confidence interval, 3.07%-13.80%; P = .002). Prespecified mixed-model analysis also showed that topiramate compared with placebo decreased the percentage of heavy drinking days (mean difference, 16.19%; 95% confidence interval, 10.79%-21.60%; P < .001) and all other drinking outcomes (P < .001 for all comparisons). Adverse events that were more common with topiramate vs placebo, respectively, included paresthesia (50.8% vs 10.6%), taste perversion (23.0% vs 4.8%), anorexia (19.7% vs 6.9%), and difficulty with concentration (14.8% vs 3.2%).Conclusion: Topiramate is a promising treatment for alcohol dependence.Trial Registration: clinicaltrials.gov Identifier: NCT00210925. [ABSTRACT FROM AUTHOR]

Liquid biopsy is a revolutionary tool that is gaining momentum in the field of cancer research. As a body fluid, urine can be used in non-invasive diagnostics for various types of cancer. We investigated the performance of UAS™ as a preservative for urinary analytes. Firstly, the need for urine preservation was investigated using urine samples from healthy volunteers. Secondly, the performance of UAS™ was assessed for cell-free DNA (cfDNA) and host cell integrity during storage at room temperature (RT) and after freeze-thaw cycling. Finally, UAS™ was used in a clinical setting on samples from breast and prostate cancer patients. In the absence of a preservative, urinary cfDNA was degraded, and bacterial overgrowth occurred at RT. In urine samples stored in UAS™, no microbial growth was seen, and cfDNA and cellular integrity were maintained for up to 14 days at RT. After freeze-thaw cycling, the preservation of host cell integrity and cfDNA showed significant improvements when using UAS™ compared to unpreserved urine samples. Additionally, UAS™ was found to be compatible with several commercially available isolation methods.

The aim of this review was to explore the status of urine sampling as a liquid biopsy for noninvasive cancer research by reviewing used preanalytical parameters and protocols. We searched two main health sciences databases, PubMed and Web of Science. From all eligible publications (2010-2022), information was extracted regarding: (a) study population characteristics, (b) cancer type, (c) urine preanalytics, (d) analyte class, (e) isolation method, (f) detection method, (g) comparator used, (h) biomarker type, (i) conclusion and (j) sensitivity and specificity. The search query identified 7835 records, of which 924 unique publications remained after screening the title, abstract and full text. Our analysis demonstrated that many publications did not report information about the preanalytical parameters of their urine samples, even though several other studies have shown the importance of standardization of sample handling. Interestingly, it was noted that urine is used for many cancer types and not just cancers originating from the urogenital tract. Many different types of relevant analytes have been shown to be found in urine. Additionally, future considerations and recommendations are discussed: (a) the heterogeneous nature of urine, (b) the need for standardized practice protocols and (c) the road toward the clinic. Urine is an emerging liquid biopsy with broad applicability in different analytes and several cancer types. However, standard practice protocols for sample handling and processing would help to elaborate the clinical utility of urine in cancer research, detection and disease monitoring., (© 2023 The Authors. International Journal of Cancer published by John Wiley & Sons Ltd on behalf of UICC.)

Biomaterial-associated infections are a major healthcare challenge as they are responsible for high disease burden in critically ill patients. In this study, we have developed drug-eluting antibacterial catheters to prevent catheter-related infections. Niclosamide (NIC), originally an antiparasitic drug, was incorporated into the polymeric matrix of thermoplastic polyurethane (TPU) via solvent casting, and catheters were fabricated using hot-melt extrusion technology. The mechanical and physicochemical properties of TPU polymers loaded with NIC were studied. NIC was released in a sustained manner from the catheters and exhibited in vitro antibacterial activity against Staphylococcus aureus and Staphylococcus epidermidis. Moreover, the antibacterial efficacy of NIC-loaded catheters was validated in an in vivo biomaterial-associated infection model using a methicillin-susceptible and methicillin-resistant strain of S. aureus. The released NIC from the produced catheters reduced bacterial colonization of the catheter as well as of the surrounding tissue. In summary, the NIC-releasing hot-melt extruded catheters prevented implant colonization and reduced the bacterial colonization of peri-catheter tissue by methicillin sensitive as well as resistant S. aureus in a biomaterial-associated infection mouse model and has good prospects for preclinical development., (© 2022. The Author(s).)

Bacterial infections are a serious healthcare complication in orthopedic and trauma surgery worldwide. Compared to systemic, local antibiotic prophylaxis has been shown to provide a higher antibiotic dose and bioavailability at the bone site with minimum toxic effects. However, there are still not enough biomaterial and antibiotic combinations available for personalized implant sizes for patients. The aim of this study was to develop a bone fixation plate coating made of a composite of poly-ε-caprolactone, hydroxyapatite and halloysite nanotubes loaded with gentamicin sulphate and fabricated via fused filament fabrication 3D printing technology. The mechanical and thermal properties of the biomaterial were analyzed. The in vitro release kinetics of gentamicin sulphate were evaluated for 14 days showing a burst release during the first two days that was followed by a sustained release of bactericidal concentrations. The composite loaded with 2 and 5% gentamicin sulphate exhibited complete antimicrobial killing of Staphylococcus aureus in an ex vivo mouse femur fixation plate infection model. Moreover, a fixation plate of the composite loaded with 5% of gentamicin sulphate was able to prevent S. aureus infection in the bone and surrounding tissue in an in vivo mouse bone fixation plate infection model 3 days post-surgery. In conclusion, the newly developed composite material successfully prevented infection in vivo. Additionally, the ability to use fused filament fabrication 3D printing to produce patient-specific implants may provide a wider range of personalized solutions for patients.

Personalized medicine, produced through 3D printing, is a promising approach for delivering the required drug dose based on the patient's profile. The primary purpose of this study was to investigate the potential of two different extrusion-based additive manufacturing techniques - fused filament fabrication (FFF) and screw-based 3D printing, also known as direct extrusion additive manufacturing (DEAM). Different ethylene-vinyl acetate (EVA) copolymers (9 %VA, 12 %VA, 16 %VA, 18 %VA, 25 %VA, 28 %VA, and 40 %VA) were selected and loaded with 50% (w/w) metoprolol tartrate (MPT). Hot-melt extrusion was performed to produce the drug-loaded filaments. These filaments were used for FFF in which the mechanical and rheological properties were rate-limiting steps. The drug-loaded filament based on the 18 %VA polymer was the only printable formulation due to its appropriate mechanical and rheological properties. As for the highest VA content (40 %VA), the feeding pinch rolls cause buckling of the filaments due to insufficient stiffness, while other filaments were successfully feedable towards the extrusion nozzle. However, poor flowability out of the extrusion nozzle due to the rheological limitation excluded these formulations from the initial printing trials. Filaments were also pelletized and used for pellets-DEAM. This method showed freedom in formulation selection because the screw rotation drives the material flow with less dependence on their mechanical properties. All drug-loaded pellets were successfully printed via DEAM, as sufficient pressure was built up towards the nozzle due to single screw extrusion processing method. In contrast, filaments were used as a piston to build up the pressure required for extrusion in filament-based printing, which highly depends on the filament's mechanical properties. Moreover, printing trials using a physical mixture in powder form were also investigated and showed promising results. In vitro drug release showed similar release patterns for MPT-loaded 3D printed tablets regardless of the printing technique. Additionally, pellets-DEAM enabled the production of tablets with the highest VA content, which failed in FFF 3D printing but showed an interesting delayed release profile., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Additive manufacturing is widely used to produce highly complex structures. Moreover, this technology has proven its superiority in producing tools which can be used in different applications. We designed and produced an extrusion nozzle that allowed us to hot melt extrude drug-loaded tubes. The tubes were an essential part of a new mouse ventilator-associated pneumonia (VAP) model. Ciprofloxacin (CPX) was selected for its expected activity against the pathogen Staphylococcus aureus and ease of incorporation into thermoplastic polyurethane (TPU). TPU was selected as the carrier polymer for its biocompatibility and use in a variety of medical devices such as tubing and catheters. The effect of loading CPX within the TPU polymeric matrix and the physicochemical properties of the produced tubes were investigated. CPX showed good thermal stability and in vitro activity in preventing S. aureus biofilm formation after loading within the tube's polymeric matrix. Moreover, the produced tubes showed anti-infective efficacy in vivo. The produced tubes, which were extruded via our novel nozzle, were vital for the validation of our mouse VAP model. This model can be adopted to investigate other antibacterial and antibiofilm compounds incorporated in polymeric tubes using hot melt extrusion.

The potential of first-void (FV) urine as a non-invasive liquid biopsy for detection of human papillomavirus (HPV) DNA and other biomarkers has been increasingly recognized over the past decade. In this study, we investigated whether the volume of this initial urine stream has an impact on the analytical performance of biomarkers. In parallel, we evaluated different DNA extraction protocols and introduced an internal control in the urine preservative. Twenty-five women, diagnosed with high-risk HPV, provided three home-collected FV urine samples using three FV urine collection devices (Colli-Pee) with collector tubes that differ in volume (4, 10, 20 mL). Each collector tube was prefilled with Urine Conservation Medium spiked with phocine herpesvirus 1 (PhHV-1) DNA as internal control. Five different DNA extraction protocols were compared, followed by PCR for GAPDH and PhHV-1 (qPCR), HPV DNA, and HBB (HPV-Risk Assay), and ACTB (methylation-specific qPCR). Results showed limited effects of collection volume on human and HPV DNA endpoints. In contrast, significant variations in yield for human endpoints were observed for different DNA extraction methods ( p < 0.05). Additionally, the potential of PhHV-1 as internal control to monitor FV urine collection, storage, and processing was demonstrated.

Additive manufacturing technologies have been widely used in the medical field. More specifically, fused filament fabrication (FFF) 3D-printing technology has been thoroughly investigated to produce drug delivery systems. Recently, few researchers have explored the possibility of directly 3D printing such systems without the need for producing a filament which is usually the feedstock material for the printer. This was possible via direct feeding of a mixture consisting of the carrier polymer and the required drug. However, as this direct feeding approach shows limited homogenizing abilities, it is vital to investigate the effect of the pre-mixing step on the quality of the 3D printed products. Our study investigates the two commonly used mixing approaches-solvent casting and powder mixing. For this purpose, polycaprolactone (PCL) was used as the main polymer under investigation and gentamicin sulfate (GS) was selected as a reference. The produced systems' efficacy was investigated for bacterial and biofilm prevention. Our data show that the solvent casting approach offers improved drug distribution within the polymeric matrix, as was observed from micro-computed topography and scanning electron microscopy visualization. Moreover, this approach shows a higher drug release rate and thus improved antibacterial efficacy. However, there were no differences among the tested approaches in terms of thermal and mechanical properties.

Fused filament fabrication (FFF) 3D printing technology is widely used in many fields. For almost a decade, medical researchers have been exploring the potential use of this technology for improving the healthcare sector. Advances in personalized medicine have been more achievable due to the applicability of producing drug delivery devices, which are explicitly designed based on patients' needs. For the production of these devices, a filament-which is the feedstock for the FFF 3D printer-consists of a carrier polymer (or polymers) and a loaded active pharmaceutical ingredient (API). This systematic review of the literature investigates the most widely used approaches for producing drug-loaded filaments. It also focusses on several factors, such as the polymeric carrier and the drug, loading capacity and homogeneity, processing conditions, and the intended applications. This review concludes that the filament preparation method has a significant effect on both the drug homogeneity within the polymeric carrier and drug loading efficiency.

Background: In the context of precision medicine and in response to the highly needed capacity of rapid interventions towards new infectious diseases and pandemic outbreaks, intradermal immunization is gaining increased attention. However, the currently used Mantoux technique for ID injection is difficult to standardize and requires training, especially when used in children. To allow determining the maximum penetration depth and needle characteristics for the development of a platform of medical devices suited for intradermal injection, VAX-ID® and to ensure an accurate ID injection in children, the epidermal and dermal thickness at the proximal ventral and dorsal forearm (PVF & PDF) and at the deltoid region in children aged 8 weeks to 18 years were assessed. The lateral part of the upper leg was assessed as well in children aged 8 weeks to 2 years since it is a commonly used injection site in this population., Materials & Methods: Mean thickness of the PVF, PDF, lateral part of the upper leg and deltoid were measured using high-frequency ultrasound. Association with gender, age and BMI was assessed using Mann-Whitney U Test, Spearman correlation and Wilcoxon Signed Ranks Test, respectively., Results: Results showed an overall mean skin thickness of 0.99 mm (SD: 0.14 mm) at the PVF, 1.20 mm (SD: 0.17) at the PDF, 1.28 mm (SD: 0.16) at the lateral part of the upper leg and increasing to 1.32 mm (0.25) at the deltoid region. Age and BMI correlated significantly (p < 0.001) with skin thickness at all investigated body sites. Gender did not affect skin thickness in the investigated population., Conclusion: Significant differences in skin thickness at the PVF, PDF and deltoid region were seen according to age and BMI. An optimal needle length of 0.7 mm is advised to guarantee intradermal injection in children at all investigated injection sites. (NCT02727114)., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Great interest has been directed towards the use of first-void (FV) urine as a liquid biopsy for high-risk HPV DNA testing. The aim of this study was to investigate the potential effect of a first generation FV urine collection device on the detection of HPV DNA and to assess if the concentration of HPV DNA varies between FV urine collected in the morning and those collected later during the day. In this prospective cohort study, 33 self-reported HPV-positive women participated. An FV urine sample was collected by these women in the morning (first urine of the day) and another sample was collected later that day for four consecutive days using two different collection methods; i.e., the Colli-Pee ® and a standard urine cup. Samples were collected at home and returned at ambient temperature to the laboratory by postal mail. HPV DNA testing was conducted with the Riatol qPCR HPV genotyping assay. Based on the combined generalized linear mixed model used, there was no significant impact of the timing of collection (morning versus later during the day) on copies of HPV DNA, whereas Colli-Pee ® collected samples show higher HPV concentrations than cup collected samples. However, at high concentrations of hDNA, the benefit of the Colli-Pee ® disappeared., (Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Although intramuscular (IM) injection is still the most preferred method for vaccination, intradermal (ID) delivery may have several advantages over intramuscular and subcutaneous (SC), including an improved immune response and antigen dose sparing effect. However it is currently limited due to the difficulty in standardizing the injection technique often based on the Mantoux technique. Difficulties encountered using the Mantoux technique could be overcome by the use of alternative ID delivery systems that confer more uniform and standardized procedures. The aim of this study was to evaluate the performance of a newly developed intradermal injection device, VAX-ID™, via a proof-of-concept to assess the immunogenicity of a commercially available hepatitis B booster vaccination in healthy hepatitis B pre-immunised subjects. Additionally, device safety and tolerability was evaluated., Materials and Methods: Three different routes of administration were compared over 4 groups, each receiving hepatitis B vaccine antigen: (1) standard IM injection in the deltoid region (HBVAXPRO® 10 µg/1 ml), (2) ID injection in the proximal posterior area of the forearm according to the Mantoux technique, (3) with VAX-ID™ in one forearm, or (4) with VAX-ID™ in both forearms. For ID injections 0.11 cc, of which 0.01 cc is overfill, was drawn from a vial containing HBVAXPRO® 40 µg/1 ml. Immunogenicity and safety were followed-up at day 0, 14, 30 and 210., Results: A total of 48 subjects were included. All subjects showed an anamnestic response at 14 days post booster vaccination. Elevated titres persisted until end of follow-up at day 210. For the ID groups a 3 fold higher immune response at day 14 and day 30 was recorded compared to IM group. Local adverse events were more reported for ID compared to IM., Conclusions: The investigated ID injection device VAX-ID™ proves to be a good alternative to offer ID vaccination., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Purpose: The force that has to be exerted on the plunger for administering a given amount of fluid in a given time, has an important influence on comfort for the subject and usability for the administrator in intradermal drug delivery. The purpose of this study is to model those forces that are subject-independent, by linking needle and syringe geometry to the force required for ejecting a given fluid at a given ejection rate., Material and Methods: We extend the well-known Hagen-Poiseuille formula to predict pressure drop induced by a fluid passing through a cylindrical body. The model investigates the relation between the pressure drop in needles and the theoretic Hagen-Poiseuille prediction and is validated in fifteen needles from 26G up to 33G suited for intradermal drug delivery. We also provide a method to assess forces exerted by operators in real world conditions., Results: The model is highly linear in each individual needle with R-square values ranging from 75% up to 99.9%. Ten out of fifteen needles exhibit R-square values above 99%. A proof-of-concept for force assessment is provided by logging forces in operators in real life conditions., Conclusions: The force assessment method and the model can be used to pinpoint needle geometry for intradermal injection devices, tuning comfort for subjects and usability for operators.

Venous thromboembolism (VTE) is a frequent complication of cancer associated with morbidity, mortality, increased hospitalizations and higher health care costs. Cancer patients at increased risk for VTE can be identified using a validated risk assessment score, and the incidence of VTE can be reduced in high-risk settings using anticoagulation. Rivaroxaban is a potent, oral, direct, factor Xa inhibitor approved for the prevention and treatment of thromboembolic events, including VTE. CASSINI is a double-blind, randomized, parallel-group, multicentre study comparing rivaroxaban with placebo in adult ambulatory patients with various cancers who are initiating systemic cancer therapy and are at high risk of VTE (Khorana score ≥ 2). Patients with primary brain tumours or those at risk for bleeding are excluded. Approximately 700 patients will be randomized 1:1 to rivaroxaban 10 mg daily or placebo for up to 6 months if there is no evidence of VTE from compression ultrasonography (CU) during screening or from routine care imaging within 30 days prior to randomization. Mandatory CU will also be performed at weeks 8 and 16 (±7 days), and at study end (±3 days). The primary efficacy hypothesis is that anticoagulation with rivaroxaban reduces the composite of objectively confirmed symptomatic or asymptomatic, lower-extremity, proximal deep-vein thrombosis (DVT); symptomatic, upper-extremity DVT; symptomatic or incidental pulmonary embolism; and VTE-related death compared with placebo. The primary safety objective is to assess major bleeding events (Clinical trial information: NCT02555878).

Background: Intradermal immunization is gaining increased attention due to multiple factors: (1) intradermal (ID) vaccination has been shown to induce improved immunogenicity compared to intramuscular (IM) vaccination; (2) ID vaccination has been shown to have a dose-sparing potential over IM leading to a reduced vaccine cost and an increased availability of vaccines worldwide. However, the currently used Mantoux technique for ID injection is difficult to standardize and requires training. The aim of the study was (1) to assess the epidermal and dermal thickness at the proximal ventral and dorsal forearm (PVF & PDF) and deltoid in adults aged 18-65years (2) to determine the maximum penetration depth and needle characteristics for the development of a platform of medical devices suited for intradermal injection, VAX-ID™., Materials and Methods: Mean thickness of the PVF, PDF and deltoid were measured using high-frequency ultrasound of healthy adults aged 18-65years. Correlation with gender, age and BMI was assessed using Mann-Whitney U Test, Spearman correlation and Wilcoxon Signed Ranks Test, respectively., Results: Results showed an overall mean skin thickness of 1.19mm (0.65-1.55mm) at the PVF, 1.44mm (0.78-1.84mm) at the PDF, and 2.12mm (1,16-3.19mm) at the deltoid. Thickness of PVF & PDF and deltoid were significantly different for men vs women (p mean <0.001, <0.001, <0.001, and p min <0.001, 0.012, <0.001, respectively). A significant association was found for age at the deltoid region (p<0.001). Skin thickness for PVF, PDF & deltoid was significantly associated to BMI (p<0.001)., Conclusion: Significant differences in skin thickness were seen for the PVF, PDF and deltoid region for gender, and BMI. Age only influenced the skin thickness at deltoid region. A needle length of 1.0mm is best option for intradermal injection at the dorsal forearm (NCT02363465)., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Background: In a single-center, placebo-controlled study, topiramate reduced binge eating and weight in patients with binge eating disorder (BED) and obesity. The current investigation evaluated the safety and efficacy of topiramate in a multicenter, placebo-controlled trial., Methods: Eligible patients between 18 and 65 years with >or= 3 binge eating days/week and a body mass index (BMI) between 30 and 50 kg/m2 were randomized., Results: A total of 407 patients enrolled; 13 failed to meet inclusion criteria, resulting in 195 topiramate and 199 placebo patients. Topiramate reduced binge eating days/week (-3.5 +/- 1.9 vs. -2.5 +/- 2.1), binge episodes/week (-5.0 +/- 4.3 vs. -3.4 +/- 3.8), weight (-4.5 +/- 5.1 kg vs. .2 +/- 3.2 kg), and BMI (-1.6 +/- 1.8 kg/m2 vs. .1 +/- 1.2 kg/m2) compared with placebo (p < .001). Topiramate induced binge eating remission in 58% of patients (placebo, 29%; p < .001). Discontinuation rates were 30% in each group; adverse events (AEs) were the most common reason for topiramate discontinuation (16%; placebo, 8%). Paresthesia, upper respiratory tract infection, somnolence, and nausea were the most common AEs with topiramate., Conclusions: This multicenter study in patients with BED associated with obesity demonstrated that topiramate was well tolerated and efficacious in improving the features of BED and in reducing obesity.

The effect of administering the thiol modulating agent buthionine sulfoximine (BSO) in conjunction with alkylating chemotherapy was investigated in vivo in the mouse KHT sarcomas and bone marrow stem cells. Tumour response to treatment was assessed by an in vivo to in vitro excision assay and bone marrow survival was determined in vitro by CFU-GM. Glutathione (GSH) depletion and recovery kinetics were determined at various times after treatment using high performance liquid chromatography (HPLC) techniques. Following a single 2.5 mmol kg-1 dose of BSO, tumour GSH reached a nadir of approximately 40% of control 12-16 h after treatment. Bone marrow GSH was depleted to approximately 45% of control 4-8 h after treatment but recovered to normal by 16 h. When a range of doses of CCNU, mitomycin C, cyclophosphamide or melphalan (MEL) were given 16 h after mice were exposed to a 2.5 mmol kg-1 dose of BSO, only the antitumour efficacy of MEL was effectively enhanced (by a factor of approximately 1.4). This BSO-MEL combination appeared to be selective for the tumour as the bone marrow toxicity was not increased beyond that seen for MEL alone. Since increasing the administered dose of BSO neither increased the extent of thiol depletion in the tumour nor enhanced the antitumour efficacy of MEL, three other protocols for delivering the thiol depletor were explored. BSO was given either as multiple 2.5 mmol kg-1 doses administered at 6 or 16 h intervals or continuously at a concentration of 30 mM supplied in the animals' drinking water. Both multi-dose BSO pretreatments were found to increase both the antitumour efficacy and normal tissue toxicity of MEL such that no advantage compared to the single dose combination was achieved. In contrast, maintaining the thiol depletor in the drinking water led to an approximately 1.7-fold increase in the antitumour efficacy of MEL without any corresponding increase in bone marrow stem cell toxicity. For the various pretreatment strategies it was possible, in all cases, to account for the presence or absence of a net therapeutic benefit on the basis of the tumour and bone marrow GSH depletion and recovery kinetics.