Search

The extension of elastic optical networks (EON) to multi-band transmission (MB-EON) shows promise in enhancing spectral efficiency, throughput, and long-term cost-effectiveness for telecom operators. However, designing MB-EON networks introduces complex challenges, notably the optimization of physical parameters like optical power and quality of transmission (QoT). Frequency-dependent characteristics of fiber, such as loss, dispersion, and nonlinear effects, alongside inter-channel stimulated Raman scattering, pose significant hurdles when extending beyond the L+C (LC) band to a continuous spectrum over 100 nm. In this study, we propose a span-by-span methodology for optimal power allocation, introducing two hyper-accelerated power optimization (HPO) strategies: flat launch power (FLP) and flat received power (FRP). These approaches significantly expedite network power optimization while preserving the stability of running services. Our comparative analysis of FLP and FRP models reveals that while FRP has a minimal effect on capacity (increasing less than 10 Tbps for an L+C+S (LCS) system over 100 km), it improves flatness and GSNR/OSNR metrics in the S-band by approximately 2/0 dB and 2.5/6 dB, respectively. A network-wide analysis across various topologies shows that the FRP technique enhances minimum GSNR, contributing to a throughput increase of 12% to 75%, depending on network scale, at a 1% bandwidth blocking rate. Lastly, our application of HPO in MB-EON for both local and global power optimization demonstrates that while both approaches offer comparable performance, global optimization is simpler and more cost-effective for large-scale networks.

Free-space optic (FSO) is a promising solution to provide broadband Internet access for high-speed trains (HSTs). Besides, reconfigurable intelligent surfaces (RIS) are considered as hardware technology to improve performance of optical wireless communication systems. In this paper, we propose a RIS-assisted FSO system to provide access connectivity for HTSs, as an upgrade for the existing direct and relay-assisted FSO access setups. Our motivation is mainly based on well-proven results indicating that a RIS-assisted optical wireless system, with a large enough number of RIS elements, outperforms a relay-assisted one thanks to its programmable structure. We firstly compute the statistical expressions of the considered RIS-assisted FSO channels under weak and moderate-to-strong fading conditions. Then, the network's average signal-to-noise ratio and outage probability are formulated based on the assumed fading conditions, and for two fixed- and dynamic-oriented RIS coverage scenarios. Our results reveal that the proposed access network offers up to around 44% higher data rates and 240% wider coverage area for each FSO base station (FSO-BS) compared to those of the relay-assisted one. The increase of coverage area, on average, reduces 67% the number of required FSO-BSs for a given distance, which results in fewer handover processes compared to the alternative setups. Finally, the results are verified through Monte-Carlo simulations., Comment: 10 pages and 8 figures; this work has been submitted for possible publication. Note: The first author's affiliation has been changed to "EURECOM Institute" since Oct. 15th, 2021. However, the paper was written before that time

Underwater sensor networks (UWSNs) are of interest to gather data from underwater sensor nodes (SNs) and deliver information to a terrestrial access point (AP) in the uplink transmission, and transfer data from the AP to the SNs in the downlink transmission. In this paper, we investigate a triple-hop UWSN in which autonomous underwater vehicle (AUV) and unmanned aerial vehicle (UAV) relays enable end-to-end communications between the SNs and the AP. It is assumed that the SN--AUV, AUV--UAV, and UAV--AP links are deployed by underwater optical communication (UWOC), free-space optic (FSO), and radio frequency (RF) technologies, respectively. Two scenarios are proposed for the FSO uplink and downlink transmissions between the AUV and the UAV, subject to water-to-air and air-to-water interface impacts; direct transmission scenario (DTS) and retro-reflection scenario (RRS). After providing the channel models and their statistics, the UWSN's outage probability and average bit error rate (BER) are computed. Besides, a tracking procedure is proposed to set up reliable and stable AUV--UAV FSO communications. Through numerical results, it is concluded that the RSS scheme outperforms the DTS one with about 200% (32%) and 80% (17%) better outage probability (average BER) in the uplink and downlink, respectively. It is also shown that the tracking procedure provides on average 480% and 170% improvements in the network's outage probability and average BER, respectively, compared to poorly aligned FSO conditions. The results are verified by applying Monte-Carlo simulations., Comment: 11 pages, 10 figures, this work has been submitted for possible publication

Delta-orthogonal multiple access (D-OMA) has been recently investigated as a potential technique to enhance the spectral efficiency in the sixth-generation (6G) networks. D-OMA enables partial overlapping of the adjacent sub-channels that are assigned to different clusters of users served by non-orthogonal multiple access (NOMA), at the expense of additional interference. In this paper, we analyze the performance of D-OMA in the uplink and develop a multi-objective optimization framework to maximize the uplink energy efficiency (EE) in a multi-access point (AP) network enabled by D-OMA. Specifically, we optimize the sub-channel and transmit power allocations of the users as well as the overlapping percentage of the spectrum between the adjacent sub-channels. The formulated problem is a mixed binary non-linear programming problem. Therefore, to address the challenge we first transform the problem into a single-objective problem using Tchebycheff method. Then, we apply the monotonic optimization (MO) to explore the hidden monotonicity of the objective function and constraints, and reformulate the problem into a standard MO in canonical form. The reformulated problem is then solved by applying the outer polyblock approximation method. Our numerical results show that D-OMA outperforms the conventional non-orthogonal multiple access (NOMA) and orthogonal frequency division multiple access (OFDMA) when the adjacent sub-channel overlap and scheduling are optimized jointly., Comment: This work has been submitted to the IEEE for possible publication

The emerging cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising scheme to tackle the capacity crunch in wireless networks. Designing the optimal fronthaul network in the CF-mMIMIO is of utmost importance to deploy a cost- and energy-efficient network. In this paper, we present a framework to optimally design the fronthaul network of CF-mMIMO utilizing optical fiber and free space optical (FSO) technologies. We study an uplink data transmission of the CF-mMIMO network wherein each of the distributed access points (APs) is connected to a central processing unit (CPU) through a capacity-limited fronthaul, which could be the optical fiber or FSO. Herein, we have derived achievable rates and studied the network's energy efficiency in the presence of power consumption models at the APs and fronthaul links. Although an optical fiber link has a larger capacity, it consumes less power and has a higher deployment cost than that of an FSO link. For a given total number of APs, the optimal number of optical fiber and FSO links and the optimal capacity coefficient for the optical fibers are derived to maximize the system's performance. Finally, the network's performance is investigated through numerical results to highlight the effects of different types of optical fronthaul links., Comment: 10 pages, 5 figures, This work has been accepted to be published in the AUT Journal of Electrical Engineering

Cell-free massive MIMO (CF-mMIMO) network and its user-centric (UC) version are considered as promising techniques for the next generations of wireless networks. However, fronthaul and backhaul assignments are challenging issues in these networks. In this paper, energy efficiencies of uplink transmission for the CF- and UC-mMIMO networks are studied, wherein access points (APs) are connected to aggregation nodes (ANs) through radio frequency (RF) and/or free-space optic (FSO) fronthauls, and the ANs are connected to a central processing unit via fiber backhauls. The achievable data rates are derived by taking into account the effects of hardware non-ideality at the APs and ANs, FSO alignment and weather conditions. To have a robust and energy-efficient network, especially in the presence of FSO misalignment and adverse weather conditions, firstly, a cognitive RF--FSO fronthaul assignment algorithm is proposed at the cost of sharing the available RF bandwidth between the access and fronthaul links. Then, optimal power allocations at the users and APs are investigated, and two analytical approaches are proposed to solve the non-convex optimization problem. Through numerical results, we have discussed how utilizing the cognitive RF--FSO fronthaul assignment achieves higher energy efficiency compared to that of FSO-only, RF-only, or simultaneously using RF and FSO fronthaul links, e.g., achieving up to $198\%$ higher energy efficiency under unfavorable conditions. Moreover, the effects of FSO misalignment, weather conditions, and power allocations on the performances of the CF- and UC-mMIMO networks are discussed., Comment: 14 pages, 10 figures, This work has been submitted for possible publication

In this paper, we propose to use the discretized version of the so-called Enhanced Gaussian Noise (EGN) model to estimate the non-linearity effects of fiber on the performance of optical coherent and uncompensated transmission (CUT) systems. By computing the power of non-linear interference noise and considering optical amplifier noise, we obtain the signal-to-noise (SNR) ratio and achievable rate of CUT. To allocate the power of each CUT channel, we consider two optimization problems with the objectives of maximizing minimum SNR margin and achievable rate. We show that by using the discretized EGN model, the complexity of the introduced optimization problems is reduced compared with the existing optimization problems developed based on the so-called discretized Gaussian Noise (GN) model. In addition, the optimization based on the discretized EGN model leads to a better SNR and achievable rate. We validate our analytical results with simulations and experimental results. We simulate a five-channel coherent system on OptiSystem software, where a close agreement is observed between optimizations and simulations. Furthermore, we measured SNR of commercial 100Gbps coherent transmitter over 300 km single-mode fiber (SMF) and non-zero dispersion-shifted fiber (NZDSF), by considering single-channel and three-channel coherent systems. We observe there are performance gaps between experimental and analytical results, which is mainly due to other sources of noise such as transmitter imperfection noise, thermal noise, and shot noise, in experiments. By including these sources of noise in the analytical model, the gaps between analytical and experimental results are reduced.

Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. This paper introduces the problem of mobility-aware optimization of resources in VLC networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of users. Due to the stationary nature of indoor optical wireless channels, future channel state information (CSI) can be predicted by anticipating the future locations of users. A resource allocation algorithm is thus proposed, which uses CSI to dynamically allocate network resources to users. To solve this mathematically intractable problem, a novel relaxation method is proposed, which proves to be a useful tool to develop efficient algorithms for network optimization problems with a proportional fairness utility function. The resulting algorithm is extremely faster than the previous method and awareness of mobility enhances the overall performance of the network in terms of rate and fairness utility function., Comment: 13 pages and 9 figures, Journal of Lightwave Technology, 2018

In this paper, we study the cell planning problem for a two-tier cellular network containing two types of base stations (BSs)-- i.e. with fiber backhaul, referred to as wired BSs (W-BSs), and BSs with wireless backhaul, referred to as unwired-BSs (U-BSs). In-band full-duplex wireless communications is used to connect U-BSs and W-BSs. We propose an algorithm to determine the minimum number of W-BSs and U-BSs to satisfy given cell and capacity coverage constraints. Furthermore, we apply our proposed non-dominated sorting genetic algorithm II (NSGA-II) to solve both cell planning and joint cell and backhaul planning problem to minimize the cost of planning, while maximizing the coverage simultaneously. Additionally, the considered cell planning program is developed into an optimization by including the problem of minimizing the cost of fiber backhaul deployment. In order to analyze the performance of the proposed algorithm, we study three different deployment scenarios based on different spatial distributions of users and coverage areas. The results show the superiority of our proposed NSGA-II algorithm for both cell planning and joint cell and backhaul planning to other well-known optimization algorithms. The results also reveal that there is a trade-off between cell deployment costs and SINR/rate coverage, and W-BSs are placed in congested areas to consume less resources for wireless backhauls. Similarly, a trade-off between cell and fiber deployment costs and SINR/rate coverage is observed in planning. We show that for realistic scenarios desirable solutions can be selected from the Pareto front of the introduced multi-objective problem based on given cellular operator policies.

Underwater wireless optical communications is an emerging solution to the expanding demand for broadband links in oceans and seas. In this paper, a cellular underwater wireless optical code division multiple-access (UW-OCDMA) network is proposed to provide broadband links for commercial and military applications. The optical orthogonal codes (OOC) are employed as signature codes of underwater mobile users. Fundamental key aspects of the network such as its backhaul architecture, its potential applications and its design challenges are presented. In particular, the proposed network is used as infrastructure of centralized, decentralized and relay-assisted underwater sensor networks for high-speed real-time monitoring. Furthermore, a promising underwater localization and positioning scheme based on this cellular network is presented. Finally, probable design challenges such as cell edge coverage, blockage avoidance, power control and increasing the network capacity are addressed., Comment: 11 pages, 10 figures