Search

Barley (Hordeum vulgare L.) possesses a large and highly repetitive genome of 5.1 Gb that has hindered the development of a complete sequence. In 2012, the International Barley Sequencing Consortium released a resource integrating whole-genome shotgun sequences with a physical and genetic framework. However, because only 6278 bacterial artificial chromosome (BACs) in the physical map were sequenced, fine structure was limited. To gain access to the gene-containing portion of the barley genome at high resolution, we identified and sequenced 15 622 BACs representing the minimal tiling path of 72 052 physical-mapped gene-bearing BACs. This generated ~1.7 Gb of genomic sequence containing an estimated 2/3 of all Morex barley genes. Exploration of these sequenced BACs revealed that although distal ends of chromosomes contain most of the gene-enriched BACs and are characterized by high recombination rates, there are also gene-dense regions with suppressed recombination. We made use of published map-anchored sequence data from Aegilops tauschii to develop a synteny viewer between barley and the ancestor of the wheat D-genome. Except for some notable inversions, there is a high level of collinearity between the two species. The software HarvEST:Barley provides facile access to BAC sequences and their annotations, along with the barley-Ae. tauschii synteny viewer. These BAC sequences constitute a resource to improve the efficiency of marker development, map-based cloning, and comparative genomics in barley and related crops. Additional knowledge about regions of the barley genome that are gene-dense but low recombination is particularly relevant.

For the vast majority of species - including many economically or ecologically important organisms, progress in biological research is hampered due to the lack of a reference genome sequence. Despite recent advances in sequencing technologies, several factors still limit the availability of such a critical resource. At the same time, many research groups and international consortia have already produced BAC libraries and physical maps and now are in a position to proceed with the development of whole-genome sequences organized around a physical map anchored to a genetic map. We propose a BAC-by-BAC sequencing protocol that combines combinatorial pooling design and second-generation sequencing technology to efficiently approach denovo selective genome sequencing. We show that combinatorial pooling is a cost-effective and practical alternative to exhaustive DNA barcoding when preparing sequencing libraries for hundreds or thousands of DNA samples, such as in this case gene-bearing minimum-tiling-path BAC clones. The novelty of the protocol hinges on the computational ability to efficiently compare hundred millions of short reads and assign them to the correct BAC clones (deconvolution) so that the assembly can be carried out clone-by-clone. Experimental results on simulated data for the rice genome show that the deconvolution is very accurate, and the resulting BAC assemblies have high quality. Results on real data for a gene-rich subset of the barley genome confirm that the deconvolution is accurate and the BAC assemblies have good quality. While our method cannot provide the level of completeness that one would achieve with a comprehensive whole-genome sequencing project, we show that it is quite successful in reconstructing the gene sequences within BACs. In the case of plants such as barley, this level of sequence knowledge is sufficient to support critical end-point objectives such as map-based cloning and marker-assisted breeding.

Abstract Background High density genetic maps of plants have, nearly without exception, made use of marker datasets containing missing or questionable genotype calls derived from a variety of genic and non-genic or anonymous markers, and been presented as a single linear order of genetic loci for each linkage group. The consequences of missing or erroneous data include falsely separated markers, expansion of cM distances and incorrect marker order. These imperfections are amplified in consensus maps and problematic when fine resolution is critical including comparative genome analyses and map-based cloning. Here we provide a new paradigm, a high-density consensus genetic map of barley based only on complete and error-free datasets and genic markers, represented accurately by graphs and approximately by a best-fit linear order, and supported by a readily available SNP genotyping resource. Results Approximately 22,000 SNPs were identified from barley ESTs and sequenced amplicons; 4,596 of them were tested for performance in three pilot phase Illumina GoldenGate assays. Data from three barley doubled haploid mapping populations supported the production of an initial consensus map. Over 200 germplasm selections, principally European and US breeding material, were used to estimate minor allele frequency (MAF) for each SNP. We selected 3,072 of these tested SNPs based on technical performance, map location, MAF and biological interest to fill two 1536-SNP "production" assays (BOPA1 and BOPA2), which were made available to the barley genetics community. Data were added using BOPA1 from a fourth mapping population to yield a consensus map containing 2,943 SNP loci in 975 marker bins covering a genetic distance of 1099 cM. Conclusion The unprecedented density of genic markers and marker bins enabled a high resolution comparison of the genomes of barley and rice. Low recombination in pericentric regions is evident from bins containing many more than the average number of markers, meaning that a large number of genes are recombinationally locked into the genetic centromeric regions of several barley chromosomes. Examination of US breeding germplasm illustrated the usefulness of BOPA1 and BOPA2 in that they provide excellent marker density and sensitivity for detection of minor alleles in this genetically narrow material.

BackgroundA large number of genetic variations have been identified in rice. Such variations must in many cases control phenotypic differences in abiotic stress tolerance and other traits. A single feature polymorphism (SFP) is an oligonucleotide array-based polymorphism which can be used for identification of SNPs or insertion/deletions (INDELs) for high throughput genotyping and high density mapping. Here we applied SFP markers to a lingering question about the source of salt tolerance in a particular rice recombinant inbred line (RIL) derived from a salt tolerant and salt sensitive parent.ResultsExpression data obtained by hybridizing RNA to an oligonucleotide array were analyzed using a statistical method called robustified projection pursuit (RPP). By applying the RPP method, a total of 1208 SFP probes were detected between two presumed parental genotypes (Pokkali and IR29) of a RIL population segregating for salt tolerance. We focused on the Saltol region, a major salt tolerance QTL. Analysis of FL478, a salt tolerant RIL, revealed a small (< 1 Mb) region carrying alleles from the presumed salt tolerant parent, flanked by alleles matching the salt sensitive parent IR29. Sequencing of putative SFP-containing amplicons from this region and other positions in the genome yielded a validation rate more than 95%.ConclusionRecombinant inbred line FL478 contains a small (< 1 Mb) segment from the salt tolerant parent in the Saltol region. The Affymetrix rice genome array provides a satisfactory platform for high resolution mapping in rice using RNA hybridization and the RPP method of SFP analysis.

A rye–wheat centric chromosome translocation 1RS.1BL has been widely used in wheat breeding programs around the world. Increased yield of translocation lines was probably a consequence of increased root biomass. In an effort to map loci-controlling root characteristics, homoeologous recombinants of 1RS with 1BS were used to generate a consensus genetic map comprised of 20 phenotypic and molecular markers, with an average spacing of 2.5 cM. Physically, all recombination events were located in the distal 40% of the arms. A total of 68 recombinants was used and recombination breakpoints were aligned and ordered over map intervals with all the markers, integrated together in a genetic map. This approach enabled dissection of genetic components of quantitative traits, such as root traits, present on 1S. To validate our hypothesis, phenotyping of 45-day-old wheat roots was performed in five lines including three recombinants representative of the entire short arm along with bread wheat parents ‘Pavon 76’ and Pavon 1RS.1BL. Individual root characteristics were ranked and the genotypic rank sums were subjected to Quade analysis to compare the overall rooting ability of the genotypes. It appears that the terminal 15% of the rye 1RS arm carries gene(s) for greater rooting ability in wheat.

BackgroundCowpea (Vigna unguiculata L. Walp) is an important food and fodder legume of the semiarid tropics and subtropics worldwide, especially in sub-Saharan Africa. High density genetic linkage maps are needed for marker assisted breeding but are not available for cowpea. A single feature polymorphism (SFP) is a microarray-based marker which can be used for high throughput genotyping and high density mapping.ResultsHere we report detection and validation of SFPs in cowpea using a readily available soybean (Glycine max) genome array. Robustified projection pursuit (RPP) was used for statistical analysis using RNA as a surrogate for DNA. Using a 15% outlying score cut-off, 1058 potential SFPs were enumerated between two parents of a recombinant inbred line (RIL) population segregating for several important traits including drought tolerance, Fusarium and brown blotch resistance, grain size and photoperiod sensitivity. Sequencing of 25 putative polymorphism-containing amplicons yielded a SFP probe set validation rate of 68%.ConclusionWe conclude that the Affymetrix soybean genome array is a satisfactory platform for identification of some 1000's of SFPs for cowpea. This study provides an example of extension of genomic resources from a well supported species to an orphan crop. Presumably, other legume systems are similarly tractable to SFP marker development using existing legume array resources.

Genetic linkage maps are cornerstones of a wide spectrum of biotechnology applications, including map-assisted breeding, association genetics, and map-assisted gene cloning. During the past several years, the adoption of high-throughput genotyping technologies has been paralleled by a substantial increase in the density and diversity of genetic markers. New genetic mapping algorithms are needed in order to efficiently process these large datasets and accurately construct high-density genetic maps. In this paper, we introduce a novel algorithm to order markers on a genetic linkage map. Our method is based on a simple yet fundamental mathematical property that we prove under rather general assumptions. The validity of this property allows one to determine efficiently the correct order of markers by computing the minimum spanning tree of an associated graph. Our empirical studies obtained on genotyping data for three mapping populations of barley (Hordeum vulgare), as well as extensive simulations on synthetic data, show that our algorithm consistently outperforms the best available methods in the literature, particularly when the input data are noisy or incomplete. The software implementing our algorithm is available in the public domain as a web tool under the name MSTmap.

We report mapping of translocation breakpoints using a microarray. We used complex RNA to compare normal hexaploid wheat (17,000 Mb genome) to a ditelosomic stock missing the short arm of chromosome 1B (1BS) and wheat-rye translocations that replace portions of 1BS with rye 1RS. Transcripts detected by a probe set can come from all three Triticeae genomes in ABD hexaploid wheat, and sequences of homoeologous genes on 1AS, 1BS and 1DS often differ from each other. Absence or replacement of 1BS therefore must sometimes result in patterns within a probe set that deviate from hexaploid wheat. We termed these 'high variance probe sets' (HVPs) and examined the extent to which HVPs associated with 1BS aneuploidy are related to rice genes on syntenic rice chromosome 5 short arm (5S). We observed an enrichment of such probe sets to 15-20% of all HVPs, while 1BS represents approximately 2% of the total genome. In total 257 HVPs constitute wheat 1BS markers. Two wheat-rye translocations subdivided 1BS HVPs into three groups, allocating translocation breakpoints to narrow intervals defined by rice 5S coordinates. This approach could be extended to the entire wheat genome or any organism with suitable aneuploid or translocation stocks.

Biotic or abiotic stress can cause considerable damage to crop plants that can be managed by building disease resistance in the cultivated gene pool through breeding for disease resistance genes (R-genes). R-genes, conferring resistance to diverse pathogens or pests share a high level of similarity at the DNA and protein levels in different plant species. This property of R-genes has been successfully employed to isolate putative resistance gene analogues (RGAs) using a PCR- based approach from new plant sources. Using a similar approach, in the present study, we have successfully amplified putative RGAs having nucleotide-binding-site leucine-rich repeats (NBS-LRR-type RGAs) from seven different sources: two cultivated coffee species (Coffea arabica L. and Coffea canephora Pierre ex. A. Froehner), four related taxa endemic to India (wild tree coffee species: Psilanthus bengalensis (Roem. & Schuttles) J.-F. Leroy, Psilanthus khasiana, Psilanthus travencorensis (Wight & Arn.) J.-F. Leroy, Psilanthus weightiana (Wall. ex Wight & Arn.) J.-F. Leroy), and a cDNA pool originally prepared from light- and drought-stressed Coffea arabica L. leaves. The total PCR amplicons obtained using NBS-LRR- specific primers from each source were cloned and transformed to construct seven independent libraries, from which 434 randomly picked clones were sequenced. In silico analysis of the sequenced clones revealed 27 sequences that contained characteristic RGA motifs, of which 24 had complete uninterrupted open reading frames. Comparisons of these with published RGAs showed several of these to be novel RGA sequences. Interestingly, most of such novel RGAs belonged to the related wild Psilanthus species. The data thus suggest the potential of the secondary gene pool as possible untapped donors of resistance genes to the present day cultivated species of coffee. Key words: Psilanthus spp., coffee, resistance gene analogues (RGAs), nucleotide-binding site (NBS), leucine-rich repeats (LRR), disease resistance. Les stress biotiques ou abiotiques peuvent causer des dommages considerables aux cultures. On peut diminuer ces dommages en incorporant des genes de resistance, ou genes R, au sein du materiel en selection. Les genes R conferent la resistance a divers pathogenes/ravageurs chez differentes especes cultivees et ils presentent une grande similarite en ce qui a trait a leur sequence nucleotidique ou proteique. Cette propriete des genes R a ete exploitee avec succes pour isoler des analogues de genes R (RGA) en faisant appel a la PCR chez des especes nouvellement a l'etude. En utilisant une telle approche, les auteurs ont reussi a amplifier des RGA de type NBS-LRR a partir de sept especes : deux especes cultivees du genre Coffea L., 4 especes apparentees du genre Psilanthus Hook.f. indigenes a l'Inde et d'une collection d'ADNc prepares a partir de feuilles du Coffea arabica L. exposees a un double stress, lumiere et secheresse. Tous les amplicons obtenus a l' aide d' amorces specifiques au type NBS-LRR chez chacun des ADN ont ete clones et transformes pour produire sept banques a partir desquelles 434 clones ont ete sequences au hasard. L' analyse in silico des clones sequences a revele que 27 d' entre eux contenaient des motifs RGA caracteristiques et que 24 contenaient un ORF complet. Des comparaisons de ces sequences avec les RGA deja rapportes ont montre que plusieurs d'entre eux correspondaient a de nouvelles sequences RGA. Fait interessant, la plupart de ces RGA inedits provenaient des especes sauvages du Psilanthus. Ces resultats suggerent que le germoplasme secondaire pourrait constituer une source encore sous-exploitee en matiere de genes de resistance chez les especes cultivees du cafeier. Mots-cles : Psilanthus spp., cafeier, analogues de genes de resistance (RGA), site de liaison nucleotidique (NBS), repetitions riches en leucines (LRR), resistance aux pathogenes. [Traduit par la Redaction], Introduction Coffee (family: Rubiaceae) is one of the important commercial plantation crops of global significance with only two species of economic importance, namely Coffea arabica L. (2n = 4x = [...]

Previous studies have shown that there is considerable population structure in cultivated barley (Hordeum vulgare Lo), with the strongest structure corresponding to differences in row number and growth habit. U.S. barley breeding programs include six-row and two-row types and winter and spring types in all combinations. To facilitate mapping of complex traits in breeding germplasm, 1816 barley lines from 10 U.S. breeding programs were scored with 1536 single nucleotide polymorphism (SNP) genotyping assays. The number of SNPs segregating within breeding programs varied from 854 to 1398. Model-based analysis of population structure showed the expected clustering by row type and growth habit; however, there was additional structure, some of which corresponded to the breeding programs. The model that fit the data best had seven populations: three two-row spring, two six-row spring, and two six-row winter. Average linkage disequilibrium (LD) within populations decayed over a distance of 20 to 30 cM, but some populations showed long-range LD suggestive of admixture. Genetic distance (allele-sharing) between populations varied from 0.11 (six-row spring vs. six-row spring) to 0.45 (two-row spring vs. six-row spring). Analyses of pairwise LD revealed that the phase of allelic associations was not well correlated between populations, particularly when their allele-sharing distance was >0.2. These results suggest that pooling divergent barley populations for purposes of association mapping may be inadvisable. doi: 10.2135/cropsci2009.04.0198

Consensus genetic linkage maps provide a genomic framework for quantitative trait loci identification, map-based cloning, assessment of genetic diversity, association mapping, and applied breeding in marker-assisted selection schemes. Among 'orphan crops' with limited genomic resources such as cowpea [Vigna unguiculata (L.) Walp.] (2n = 2x = 22), the use of transcript-derived SNPs in genetic maps provides opportunities for automated genotyping and estimation of genome structure based on synteny analysis. Here, we report the development and validation of a high-throughput EST-derived SNP assay for cowpea, its application in consensus map building, and determination of synteny to reference genomes. SNP mining from 183,118 ESTs sequenced from 17 cDNA libraries yielded [approximately equal to] 10,000 high-confidence SNPs from which an Illumina 1,536-SNP GoldenGate genotyping array was developed and applied to 741 recombinant inbred lines from six mapping populations. Approximately 90% of the SNPs were technically successful, providing 1,375 dependable markers. Of these, 928 were incorporated into a consensus genetic map spanning 680 cM with 11 linkage groups and an average marker distance of 0.73 cM. Comparison of this cowpea genetic map to reference legumes, soybean (Glycine max) and Medicago truncatula, revealed extensive macrosynteny encompassing 85 and 82%, respectively, of the cowpea map. Regions of soybean genome duplication were evident relative to the simpler diploid cowpea. Comparison with Arabidopsis revealed extensive genomic rearrangement with some conserved microsynteny. These results support evolutionary closeness between cowpea and soybean and identify regions for synteny-based functional genomics studies in legumes. legume | diploid | recombinant inbred lines | segregating traits | 1536-plex genotyping doi/10.1073/pnas.0905886106

Abstract Background High density genetic maps of plants have, nearly without exception, made use of marker datasets containing missing or questionable genotype calls derived from a variety of genic and non-genic or anonymous markers, and been presented as a single linear order of genetic loci for each linkage group. The consequences of missing or erroneous data include falsely separated markers, expansion of cM distances and incorrect marker order. These imperfections are amplified in consensus maps and problematic when fine resolution is critical including comparative genome analyses and map-based cloning. Here we provide a new paradigm, a high-density consensus genetic map of barley based only on complete and error-free datasets and genic markers, represented accurately by graphs and approximately by a best-fit linear order, and supported by a readily available SNP genotyping resource. Results Approximately 22,000 SNPs were identified from barley ESTs and sequenced amplicons; 4,596 of them were tested for performance in three pilot phase Illumina GoldenGate assays. Data from three barley doubled haploid mapping populations supported the production of an initial consensus map. Over 200 germplasm selections, principally European and US breeding material, were used to estimate minor allele frequency (MAF) for each SNP. We selected 3,072 of these tested SNPs based on technical performance, map location, MAF and biological interest to fill two 1536-SNP "production" assays (BOPA1 and BOPA2), which were made available to the barley genetics community. Data were added using BOPA1 from a fourth mapping population to yield a consensus map containing 2,943 SNP loci in 975 marker bins covering a genetic distance of 1099 cM. Conclusion The unprecedented density of genic markers and marker bins enabled a high resolution comparison of the genomes of barley and rice. Low recombination in pericentric regions is evident from bins containing many more than the average number of markers, meaning that a large number of genes are recombinationally locked into the genetic centromeric regions of several barley chromosomes. Examination of US breeding germplasm illustrated the usefulness of BOPA1 and BOPA2 in that they provide excellent marker density and sensitivity for detection of minor alleles in this genetically narrow material.

Abstract Background A large number of genetic variations have been identified in rice. Such variations must in many cases control phenotypic differences in abiotic stress tolerance and other traits. A single feature polymorphism (SFP) is an oligonucleotide array-based polymorphism which can be used for identification of SNPs or insertion/deletions (INDELs) for high throughput genotyping and high density mapping. Here we applied SFP markers to a lingering question about the source of salt tolerance in a particular rice recombinant inbred line (RIL) derived from a salt tolerant and salt sensitive parent. Results Expression data obtained by hybridizing RNA to an oligonucleotide array were analyzed using a statistical method called robustified projection pursuit (RPP). By applying the RPP method, a total of 1208 SFP probes were detected between two presumed parental genotypes (Pokkali and IR29) of a RIL population segregating for salt tolerance. We focused on the Saltol region, a major salt tolerance QTL. Analysis of FL478, a salt tolerant RIL, revealed a small (< 1 Mb) region carrying alleles from the presumed salt tolerant parent, flanked by alleles matching the salt sensitive parent IR29. Sequencing of putative SFP-containing amplicons from this region and other positions in the genome yielded a validation rate more than 95%. Conclusion Recombinant inbred line FL478 contains a small (< 1 Mb) segment from the salt tolerant parent in the Saltol region. The Affymetrix rice genome array provides a satisfactory platform for high resolution mapping in rice using RNA hybridization and the RPP method of SFP analysis.

Abstract Background Flow cytometry facilitates sorting of single chromosomes and chromosome arms which can be used for targeted genome analysis. However, the recovery of microgram amounts of DNA needed for some assays requires sorting of millions of chromosomes which is laborious and time consuming. Yet, many genomic applications such as development of genetic maps or physical mapping do not require large DNA fragments. In such cases time-consuming de novo sorting can be minimized by utilizing whole-genome amplification. Results Here we report a protocol optimized in barley including amplification of DNA from only ten thousand chromosomes, which can be isolated in less than one hour. Flow-sorted chromosomes were treated with proteinase K and amplified using Phi29 multiple displacement amplification (MDA). Overnight amplification in a 20-microlitre reaction produced 3.7 – 5.7 micrograms DNA with a majority of products between 5 and 30 kb. To determine the purity of sorted fractions and potential amplification bias we used quantitative PCR for specific genes on each chromosome. To extend the analysis to a whole genome level we performed an oligonucleotide pool assay (OPA) for interrogation of 1524 loci, of which 1153 loci had known genetic map positions. Analysis of unamplified genomic DNA of barley cv. Akcent using this OPA resulted in 1426 markers with present calls. Comparison with three replicates of amplified genomic DNA revealed >99% concordance. DNA samples from amplified chromosome 1H and a fraction containing chromosomes 2H – 7H were examined. In addition to loci with known map positions, 349 loci with unknown map positions were included. Based on this analysis 40 new loci were mapped to 1H. Conclusion The results indicate a significant potential of using this approach for physical mapping. Moreover, the study showed that multiple displacement amplification of flow-sorted chromosomes is highly efficient and representative which considerably expands the potential of chromosome flow sorting in plant genomics.

Abstract Background Cowpea (Vigna unguiculata L. Walp) is an important food and fodder legume of the semiarid tropics and subtropics worldwide, especially in sub-Saharan Africa. High density genetic linkage maps are needed for marker assisted breeding but are not available for cowpea. A single feature polymorphism (SFP) is a microarray-based marker which can be used for high throughput genotyping and high density mapping. Results Here we report detection and validation of SFPs in cowpea using a readily available soybean (Glycine max) genome array. Robustified projection pursuit (RPP) was used for statistical analysis using RNA as a surrogate for DNA. Using a 15% outlying score cut-off, 1058 potential SFPs were enumerated between two parents of a recombinant inbred line (RIL) population segregating for several important traits including drought tolerance, Fusarium and brown blotch resistance, grain size and photoperiod sensitivity. Sequencing of 25 putative polymorphism-containing amplicons yielded a SFP probe set validation rate of 68%. Conclusion We conclude that the Affymetrix soybean genome array is a satisfactory platform for identification of some 1000's of SFPs for cowpea. This study provides an example of extension of genomic resources from a well supported species to an orphan crop. Presumably, other legume systems are similarly tractable to SFP marker development using existing legume array resources.

Background: High density genetic maps of plants have, nearly without exception, made use of marker datasets containing missing or questionable genotype calls derived from a variety of genic and non-genic or anonymous markers, and been presented as a single linear order of genetic loci for each linkage group. The consequences of missing or erroneous data include falsely separated markers, expansion of cM distances and incorrect marker order. These imperfections are amplified in consensus maps and problematic when fine resolution is critical including comparative genome analyses and map-based cloning. Here we provide a new paradigm, a high-density consensus genetic map of barley based only on complete and error-free datasets and genic markers, represented accurately by graphs and approximately by a best-fit linear order, and supported by a readily available SNP genotyping resource. Results: Approximately 22,000 SNPs were identified from barley ESTs and sequenced amplicons; 4,596 of them were tested for performance in three pilot phase Illumina GoldenGate assays. Data from three barley doubled haploid mapping populations supported the production of an initial consensus map. Over 200 germplasm selections, principally European and US breeding material, were used to estimate minor allele frequency (MAF) for each SNP. We selected 3,072 of these tested SNPs based on technical performance, map location, MAF and biological interest to fill two 1536-SNP "production" assays (BOPA1 and BOPA2), which were made available to the barley genetics community. Data were added using BOPA1 from a fourth mapping population to yield a consensus map containing 2,943 SNP loci in 975 marker bins covering a genetic distance of 1099 cM. Conclusion: The unprecedented density of genic markers and marker bins enabled a high resolution comparison of the genomes of barley and rice. Low recombination in pericentric regions is evident from bins containing many more than the average number of markers, meaning that a large number of genes are recombinationally locked into the genetic centromeric regions of several barley chromosomes. Examination of US breeding germplasm illustrated the usefulness of BOPA1 and BOPA2 in that they provide excellent marker density and sensitivity for detection of minor alleles in this genetically narrow material. [ABSTRACT FROM AUTHOR]

Background: A large number of genetic variations have been identified in rice. Such variations must in many cases control phenotypic differences in abiotic stress tolerance and other traits. A single feature polymorphism (SFP) is an oligonucleotide array-based polymorphism which can be used for identification of SNPs or insertion/deletions (INDELs) for high throughput genotyping and high density mapping. Here we applied SFP markers to a lingering question about the source of salt tolerance in a particular rice recombinant inbred line (RIL) derived from a salt tolerant and salt sensitive parent. Results: Expression data obtained by hybridizing RNA to an oligonucleotide array were analyzed using a statistical method called robustified projection pursuit (RPP). By applying the RPP method, a total of 1208 SFP probes were detected between two presumed parental genotypes (Pokkali and IR29) of a RIL population segregating for salt tolerance. We focused on the Saltol region, a major salt tolerance QTL. Analysis of FL478, a salt tolerant RIL, revealed a small (< 1 Mb) region carrying alleles from the presumed salt tolerant parent, flanked by alleles matching the salt sensitive parent IR29. Sequencing of putative SFP-containing amplicons from this region and other positions in the genome yielded a validation rate more than 95%. Conclusion: Recombinant inbred line FL478 contains a small (< 1 Mb) segment from the salt tolerant parent in the Saltol region. The Affymetrix rice genome array provides a satisfactory platform for high resolution mapping in rice using RNA hybridization and the RPP method of SFP analysis. [ABSTRACT FROM AUTHOR]

Genetic linkage maps are cornerstones of a wide spectrum of biotechnology applications, including map-assisted breeding, association genetics, and map-assisted gene cloning. During the past several years, the adoption of high-throughput genotyping technologies has been paralleled by a substantial increase in the density and diversity of genetic markers. New genetic mapping algorithms are needed in order to efficiently process these large datasets and accurately construct highdensity genetic maps. In this paper, we introduce a novel algorithm to order markers on a genetic linkage map. Our method is based on a simple yet fundamental mathematical property that we prove under rather general assumptions. The validity of this property allows one to determine efficiently the correct order of markers by computing the minimum spanning tree of an associated graph. Our empirical studies obtained on genotyping data for three mapping populations of barley (Hordeum vulgare), as well as extensive simulations on synthetic data, show that our algorithm consistently outperforms the best available methods in the literature, particularly when the input data are noisy or incomplete. The software implementing our algorithm is available in the public domain as a web tool under the name MSTMAP. [ABSTRACT FROM AUTHOR]

SSR (simple sequence repeats) markers derived from ESTs (expressed sequence tags), commonly called EST-SSRs or genic SSRs provide useful genetic markers for crop improvement. These are easy and economical to develop as by-products of large-scale EST resources that have become available as part of the functional genomic studies in many plant species. Here, we describe for the first time, nine genic-SSRs of coffee that are developed from the microsatellite containing ESTs from a cDNA library of moisture-stressed leaves of coffee variety, ‘CxR’ (a commercial interspecific hybrid between Coffea congensis and Coffea canephora). The markers show considerable allelic diversity with PIC values up to 0.70 and 0.75 for Coffea arabica and Coffea canephora, respectively, and robust cross-species amplification in 16 other related taxa of coffee. The validation studies thus demonstrate the potential utility of the EST-SSRs for genetic analysis of coffee germplasm. [ABSTRACT FROM AUTHOR]

A rye-wheat centric chromosome translocation 1RS.1BL has been widely used in wheat breeding programs around the world. Increased yield of translocation lines was probably a consequence of increased root biomass. In an effort to map loci-controlling root characteristics, homoeologous recombinants of 1RS with 1BS were used to generate a consensus genetic map comprised of 20 phenotypic and molecular markers, with an average spacing of 2.5 cM. Physically, all recombination events were located in the distal 40% of the arms. A total of 68 recombinants was used and recombination breakpoints were aligned and ordered over map intervals with all the markers, integrated together in a genetic map. This approach enabled dissection of genetic components of quantitative traits, such as root traits, present on 1S. To validate our hypothesis, phenotyping of 45-day-old wheat roots was performed in five lines including three recombinants representative of the entire short arm along with bread wheat parents 'Pavon 76' and Pavon 1RS.1BL. Individual root characteristics were ranked and the genotypic rank sums were subjected to Quade analysis to compare the overall rooting ability of the genotypes. It appears that the terminal 15% of the rye 1RS arm carries gene(s) for greater rooting ability in wheat.