Search

Your search keyword '"Binda, Luigia"' showing total 154 results
Start Over Author "Binda, Luigia"
154 results on '"Binda, Luigia"'

14. Investigation strategies for the diagnosis of historic structures: on-site tests on Avio Castle, Italy, and Pisece Castle, Slovenia

Author

Binda, Luigia, Lualdi, Maurizio, and Saisi, Antonella

Subjects
Castles -- Protection and preservation -- Research, Historic sites -- Protection and preservation -- Research, Engineering and manufacturing industries, Protection and preservation, Research
Abstract

Abstract: This paper presents and discusses the results of investigations carried out by the authors on two castles that are considered as case histories within a project financed by the [...]

Published
2008

18. Masonry

Author

Binda, Luigia, primary, Saisi, Antonella, additional, and Tedeschi, Cristina, additional

Published
2006
Full Text
View/download PDF

23. El comportamiento a largo plazo de torres y estructuras de fábrica. El Campanario de la Catedral de Monza

Author

Consiglio Nazionale delle Ricerche, Italia, Gruppo Nazionale per la Difesa dai Terremoti, Ministero dell'università e della ricerca scientifica e tecnologica, Italia, Binda, Luigia, Saisi, Antonella, Tiraboschi, Claudia, Consiglio Nazionale delle Ricerche, Italia, Gruppo Nazionale per la Difesa dai Terremoti, Ministero dell'università e della ricerca scientifica e tecnologica, Italia, Binda, Luigia, Saisi, Antonella, and Tiraboschi, Claudia

Abstract

[EN] After the collapse of some heavy buildings and towers in Italy and elsewhere, the hypothesis of possible continuous damage to these structures due to the dead and cyclic loads (wind, temperature variations, etc.) has been formulated by the authors. The long term behaviour of historic masonry has also been detected by laboratory creep and cyclic tests. The results indicate that a laboratory and on site investigation together with analytical modelling are important peculiarly for tall bell-towers. The application of these procedures on the Bell-Tower of the Cathedral of Monza is here reported and discussed., [ES] Tras el colapso de varios edificios de fábrica y torres en algunos países como Italia, los autores han formulado la hipótesis de un posible deterioro continuo de dichas estructuras debido tanto a las solicitaciones derivadas del peso propio como de las cargas cíclicas (viento, variaciones de temperatura, etc). El comportamiento a largo plazo de la mampostería histórica ha sido también objeto de estudio mediante un seguimiento continuo de ensayos en laboratorio y la aplicación de pruebas cíclicas. Los resultados indican que una investigación, tanto en laboratorio e in situ, sumada a una modelización analítica puede resultar fundamental en casos de campanarios de cierta altura. A continuación, se propone la aplicación de dichos procedimientos en el Campanario de la Catedral de Monza.

Published
2018

24. RILEM TC 203-RHM: Repair mortars for historic masonry

Author

Groot, TC 203 RHM: C., Hughes, K. J. J., van Balen, K., Bicer Simsir, B., Binda, Luigia, Elsen, J., van Hees, R., von Konow, T., Erik Lindqvist, J., Maurenbrecher, P., Papayanni, I., Subercaseaux, M., Tedeschi, Cristina, Toumbakary, E., Thompson, M., Valek, J., and Veiga, R.

Subjects
Renders, Plasters, Requirement, Degradation, Repair, Architectural engineering, Engineering, BM - Building Materials, Buildings and Infrastructure, plasters, Forensic engineering, General Materials Science, renders, Built Environment, Building Engineering & Civil Engineering, requirements, Built environment, degradation, Civil and Structural Engineering, Building construction, TS - Technical Sciences, business.industry, Building and Construction, Masonry, Architecture Materials, Mechanics of Materials, repair, Mortar, Decision process, business
Abstract

This article focuses on repair or replacement mortars for historical buildings. Both the decision process and questions arising are dealt with, in order to better define and illustrate technical requirements for mortars to be used for the repair or restoration of monuments and historic buildings (masonry mortars, plasters, renders…). The article summarizes a longer document, meant to help professionals in their decisions on the interventions, taking into account aspects, which are ranging from the ethics of restoration to the technical requirements.

Published
2012
Full Text
View/download PDF

26. RILEM TC 203-RHM: Repair mortars for historic masonry: Ments for repointing mortars for historic masonry

Author

Maurenbrecher, TC 203 RHM: P., Hughes, J. J., Groot, C., van Balen, K., Bicer Simsir, B., Binda, Luigia, Elsen, J., van Hees, R., von Konow, T., Lindqvist, J. E., Papayanni, I., Subercaseaux, M., Tedeschi, Cristina, Toumbakary, E., Thompson, M., Valek, J., and Veiga, R.

Subjects
Engineering, BM - Building Materials, Buildings and Infrastructure, Conservation, Mortars, Repair, Repointing, Masonry, Civil engineering, General Materials Science, Built Environment, Building Engineering & Civil Engineering, Performance requirements, Civil and Structural Engineering, TS - Technical Sciences, business.industry, Historic masonry, conservation, Building and Construction, mortars, Mortar, Architecture Materials, masonry, Mechanics of Materials, repair, repointing, Decision process, business
Abstract

This paper gives a summary of functional and performance requirements for repointing mortars for historic masonry (design, execution and maintenance). Successful performance of repair and conservation of mortar in historic masonry requires more care with design and execution than with modern masonry. © 2012 RILEM.

Published
2012
Full Text
View/download PDF

27. RILEM TC 203-RHM: Repair mortars for historic masonry. Repair mortars for historic masonry. From problem to intervention: a decision process

Author

van Hees, TC 203 RHM: R., Hughes, J. J., Groot, C., van Balen, K., Bicer Simsir, B., Binda, Luigia, Elsen, J., von Konow, T., Erik Lindqvist, J., Maurenbrecher, P., Papayanni, I., Subercaseaux, M., Tedeschi, Cristina, Toumbakary, E., Thompson, M., Valek, J., and Veiga, R.

Subjects
Engineering, Architectural engineering, business.industry, Building and Construction, Masonry, Intervention (law), Mechanics of Materials, Forensic engineering, General Materials Science, MortarsRepairDecision processRequirements, Mortar, Decision process, business, Built environment, Civil and Structural Engineering
Abstract

This article focuses on repair or replacement mortars for historical buildings. Both the decision process and questions arising are dealt with, in order to better define and illustrate technical requirements for mortars to be used for the repair or restoration of monuments and historic buildings (masonry mortars, plasters, renders…). The article summarizes a longer document, meant to help professionals in their decisions on the interventions, taking into account aspects, which are ranging from the ethics of restoration to the technical requirements.

Published
2012

28. Rilem TC 203-RHM. Repair mortars for historic masonry. The role of mortar in masonry: an introduction to requirements for the design of repair mortars

Author

Hughes, TC 203 RHM: J. J., Groot, C., van Balen, K., Bicer Simsir, B., Binda, Luigia, Elsen, J., van Hees, R., von Konow, T., Erik Lindqvist, J., Maurenbrecher, P., Papayanni, I., Subercaseaux, M., Tedeschi, Cristina, Toumbakary, E., Thompson, M., Valek, J., and Veiga, R.

Subjects
Engineering, BM - Building Materials, Buildings and Infrastructure, engineering.material, Civil engineering, Mortar, Classification, Requirements, Specification, General Materials Science, Built Environment, Building Engineering & Civil Engineering, requirements, Civil and Structural Engineering, TS - Technical Sciences, Thermal dilatation, business.industry, Grout, Structural integrity, Building and Construction, Environmental exposure, Masonry, specification, Architecture Materials, classification, Mechanics of Materials, Service life, mortar, business
Abstract

Mortar has been in use for many thousands of years and is integral to most masonry construction. Its use is widespread in every culture where masonry is constructed. It is present in the majority of the global built cultural heritage, and is therefore a major consideration in building conservation. The effective design of a mortar for repairing masonry depends on a clear understanding of its function. The main functional uses of mortar in masonry are classified as bedding, pointing, grout, render, plaster, flooring and mortars for surface repairs. The requirements that each type of mortar must meet in service depend on its environmental exposure and its role in the masonry element that it is found within (e.g. issues such as historic authenticity, aesthetics, resistance to moisture ingress, structural integrity, and service life). Technical requirements such as adhesion, strength, elasticity, water and vapour transmittance, drying behaviour, thermal dilatation, ability to deal with salt contamination and freeze–thaw cycling, and its aesthetic properties can be quantified. Mortar properties can be adjusted by varying ingredients and their proportions, to meet the differing technical requirements

Published
2012

32. Rilem TC 203-RHM: Repair mortars for historic masonry. Testing of hardened mortars, a process of questioning and interpreting

Author

TC 203 RHM, Van balen, K., Bicer Simsir, B., Binda, Luigia, Blauer, C., Elsen, J., Groot, C., Hansen, E., Van hees, R., Henriques, F., Huges, J., Goumbakari, E. E., Von konow, T., Erik lindqvist, J., Maurenbrecher, P., Middendorf, B., Papayianni, J., Simon, S., Stefanidou, M., Subercaseaux, M., Tedeschi, Cristina, Thinsibm, N., Valek, H., Valluzzi, M. R., Vanhellemount, Y., and Veiga, R.

Subjects
Engineering, business.industry, Testing, Building and Construction, mortars, Masonry, Mechanics of Materials, Restoration, Plaster, Forensic engineering, Murs de maçonnerie, Render, General Materials Science, Technical committee, Decision process, Mortar, business, Civil and Structural Engineering, Building construction
Abstract

This paper presents an approach to the use and interpretation of tests on mortar samples when restoring historic masonry. It is largely based on the work performed by the former RILEM technical committee 167-COM, Characterisation of old mortars, closed in 2003, and the ongoing committee 203-RHM, Repair mortars for historic masonry. The focus of the present paper is on the decision process: what to test and how to interpret the test results.

Published
2009

Catalog

Books, media, physical & digital resources
See catalog results