Search

Many animal cells that crawl on extracellular substrates exhibit durotaxis, i.e., directed migration toward stiffer substrate regions. This has implications in several biological processes including tissue development and tumor progression. Here, we introduce a phenomenological model for single-cell durotaxis that incorporates both elastic deformation-mediated cell-substrate interactions and the stochasticity of cell migration. Our model is motivated by a key observation in an early demonstration of durotaxis: a single, contractile cell at a sharp interface between a softer and a stiffer region of an elastic substrate reorients and migrates toward the stiffer region. We model migrating cells as self-propelling, persistently motile agents that exert contractile traction forces on their elastic substrate. The resulting substrate deformations induce elastic interactions with mechanical boundaries, captured by an elastic potential. The dynamics is determined by two crucial parameters: the strength of the cellular traction-induced boundary elastic interaction (A), and the persistence of cell motility (Pe). Elastic forces and torques resulting from the potential orient cells perpendicular (parallel) to the boundary and accumulate (deplete) them at the clamped (free) boundary. Thus, a clamped boundary induces an attractive potential that drives durotaxis, while a free boundary induces a repulsive potential that prevents antidurotaxis. By quantifying the steady-state position and orientation probability densities, we show how the extent of accumulation (depletion) depends on the strength of the elastic potential and motility. We compare and contrast crawling cells with biological microswimmers and other synthetic active particles, where accumulation at confining boundaries is well known. We define metrics quantifying boundary accumulation and durotaxis, and present a phase diagram that identifies three possible regimes: durotaxis, and adurotaxis with and without motility-induced accumulation at the boundary. Overall, our model predicts how durotaxis depends on cell contractility and motility, successfully explains some previous observations, and provides testable predictions to guide future experiments.

PURPOSE: To assess the effect of various pelvic fixation techniques and number of rods on biomechanics of the proximal junction of long thoracolumbar posterior instrumented fusions. METHODS: A validated spinopelvic finite-element (FE) model was instrumented with L5-S1 ALIF and one of the following 9 posterior instrumentation configurations: (A) one traditional iliac screw bilaterally (2 Iliac/2 Rods); (B) T10 to S1 (Sacral Only); (C) unilateral traditional iliac screw (1 Iliac/2 Rods); (D) one traditional iliac screw bilaterally with one midline accessory rod (2 Iliac/3 rods); (E) S2AI screws connected directly to the midline rods (2 S2AI/2 Rods); and two traditional iliac screws bilaterally with two lateral accessory rods connected to the main rods at varying locations (F1: T10-11, F2: T11-12, F3: T12-L1, F4: L1-2) (4 Iliac/4 Rods). Range of motions (ROM) at T10-S1 and T9-T10 were recorded and compared between models. The T9-T10 intradiscal pressures and stresses of the T9-10 discs annulus in addition to the von Mises stresses of the T9 and T10 vertebral bodies were recorded and compared. RESULTS: For T10-S1 ROM, 4 iliac/4 rods had lowest ROM in flexion and extension, while 2 S2AI/2 rods showed lowest ROM in rotation. Constructs with 3 or 4 rods had lower stresses on the primary rods compared to 2-rod constructs. At the proximal adjacent disc (T9-10), 4 iliac/4 rods showed lowest ROM, lowest intradiscal pressures, and lowest annular stress in all directions (most pronounced in flexion-extension). Under flexion and extension, 4 iliac/4 rods also showed the lowest von Mises stresses on the T10 vertebral body but the highest stresses on the T9 vertebral body. CONCLUSIONS: Dual iliac screws with 4 rods across the lumbosacral junction and extending to the thoracolumbar junction demonstrated the lowest T10-S1 ROM, the lowest adjacent segment disc (T9-T10) ROM, intradiscal pressures, and annular stresses, and the lowest UIV stresses, albeit with the highest UIV + 1 stresses. Additional studies are needed to confirm whether these biomechanical findings dictate clinical outcomes and effect rates of proximal junctional kyphosis and failure.

INTRODUCTION: Adjunctive suture augmentation of patellar plate fixation has yet to be investigated. Our biomechanical study sought to evaluate whether suture augmentation improves dorsal patellar locking plate fixation. Our hypothesis was that suture augmentation would improve fixation of this construct. METHODS: A transverse patella fracture in six matched cadaveric pairs was stabilized using a patellar locking plate with or without suture augmentation. Specimens were tested at 60° knee flexion with load placed through quadriceps. Cyclic loading followed by load to failure was done. Stiffness, deformation at peak, and nonrecoverable deformation were calculated. RESULTS: During cyclic loading, suture augmentation demonstrated a higher average stiffness throughout all loads. At the final cycle, deformation was markedly higher without suture augmentation. Average load to failure was higher with suture augmentation. Maximum load to failure occurred at 2500 N in both groups. CONCLUSION: Suture augmentation in a transverse patellar fracture model improved dorsal plate fixation, leading to less fracture displacement at the final load. Although suture augmentation demonstrated higher stiffness and lower deformation, these trends were not statistically significant. In both groups, plate fixation sustained very high loads, which reflects the fixation strength of the dorsal locking plate and screw construct in this fracture model.

The magnetoelastic generator (MEG) is a fundamentally new platform technology to convert mechanical motions into electrical signals for sensing, therapeutics, and energy applications. Here, we present a protocol for fabricating and characterizing the MEG for personalized muscle physiotherapy when integrated into a wearable textile patch. We describe the steps for fabricating such a textile MEG, including the magnetomechanical coupling (MC) and magnetic induction (MI) layers, and characterizing their magnetoelastic and electrical properties. We then detail procedures for monitoring muscle biomechanical activities and muscle physiotherapy application. For complete details on the use and execution of this protocol, please refer to Xu et al.1.

BackgroundThe appropriate amount of cementation at the time of reverse total shoulder arthroplasty with significant proximal bone loss or resection is unknown. Extensive cementation of a humeral prosthesis makes eventual revision arthroplasty more challenging, increasing the risk of periprosthetic fracture. We analyzed the degree of subsidence and torque tolerance of humeral components undergoing standard cementation technique vs. our reduced polymethyl methacrylate (PMMA) protocol. Reduced cementation may provide sufficient biomechanical stability to resist physiologically relevant loads, while still permitting a clinically attainable torque for debonding the prosthesis.MethodsA total of 12 cadaveric humeri (6 matched pairs) underwent resection of 5 cm of bone distal to the greater tuberosity. Each pair of humeri underwent standard humeral arthroplasty preparation followed by either cementation using a 1.5-cm PMMA sphere at a location 3 cm inferior to the porous coating or standard full stem cementation. A 6-degree-of-freedom robot was used to perform all testing. Each humeral sample underwent 200 cycles of abduction, adduction, and forward elevation while being subjected to a physiologic compression force. Next, the samples were fixed in place and subjected to an increasing torque until implant-cement separation or failure occurred. Paired t tests were used to compare mean implant subsidence vs. a predetermined 5-mm threshold, as well as removal torque in matched samples.ResultsFully and partially cemented implants subsided 0.49 mm (95% CI 0.23-0.76 mm) and 1.85 mm (95% CI 0.41-3.29 mm), respectively, which were significantly less than the predetermined 5-mm threshold (P

Image-based deformation estimation is an important tool used in a variety of engineering problems, including crack propagation, fracture, and fatigue failure. These tools have been important in biomechanics research where measuring in vitro and in vivo tissue deformations are important for evaluating tissue health and disease progression. However, accurately measuring tissue deformation in vivo is particularly challenging due to limited image signal-to-noise ratio. Therefore, we created a novel deep-learning approach for measuring deformation from a sequence of images collected in vivo called StrainNet. Utilizing a training dataset that incorporates image artifacts, StrainNet was designed to maximize performance in challenging, in vivo settings. Artificially generated image sequences of human flexor tendons undergoing known deformations were used to compare benchmark StrainNet against two conventional image-based strain measurement techniques. StrainNet outperformed the traditional techniques by nearly 90%. High-frequency ultrasound imaging was then used to acquire images of the flexor tendons engaged during contraction. Only StrainNet was able to track tissue deformations under the in vivo test conditions. Findings revealed strong correlations between tendon deformation and applied forces, highlighting the potential for StrainNet to be a valuable tool for assessing rehabilitation strategies or disease progression. Additionally, by using real-world data to train our model, StrainNet was able to generalize and reveal important relationships between the effort exerted by the participant and tendon mechanics. Overall, StrainNet demonstrated the effectiveness of using deep learning for image-based strain analysis in vivo.

Aortic dissection, a critical cardiovascular condition with life-threatening implications, is distinguished by the development of a tear and its propagation within the aortic wall. A thorough understanding of the initiation and progression of these tears, or cracks, is essential for accurate diagnosis and effective treatment. This paper undertakes a fracture mechanics approach to delve into the mechanics of tear propagation in aortic dissection. Our objective is to elucidate the impact of geometric and material parameters, providing valuable insights into the determinants of this pivotal cardiovascular event. Through our investigation, we have gained an understanding of how various parameters influence the energy release rate for tear propagation in both longitudinal and circumferential directions, aligning our findings with clinical data.

BACKGROUND: Guidelines recommend dual-energy x-ray absorptiometry (DXA) screening to assess fracture risk and benefit from antiresorptive therapy in men with metastatic hormone-sensitive prostate cancer (mHSPC) on androgen deprivation therapy (ADT). However,

PURPOSE: To evaluate proximal junctional biomechanics of a MLSS relative to traditional pedicle screw fixation at the proximal extent of T10-pelvis posterior instrumentation constructs (T10-p PSF). METHODS: A previously validated three-dimensional osseoligamentous spinopelvic finite element (FE) model was used to compare proximal junctional range-of-motion (ROM), vertebral body stresses, and discal biomechanics between two groups: (1) T10-p with a T10-11 MLSS (T10-11 MLSS) and (2) T10-p with a traditional T10 pedicle screw (Traditional T10-PS). RESULTS: The T10-11 MLSS had a 5% decrease in T9 cortical bone stress compared to Traditional T10-PS. Conversely, the T10 and T11 bone stresses increased by 46% and 98%, respectively, with T10-11 MLSS compared to Traditional T10-PS. Annular stresses and intradiscal pressures (IDP) were similar at T9-T10 between constructs. At the T10-11 disc, T10-11 MLSS decreased annular stresses by 29% and IDP by 48% compared to Traditional T10-PS. Adjacent ROM (T8-9 & T9-10) were similar between T10-11 MLSS and Traditional T10-PS. T10-11 MLSS had 39% greater ROM at T10-11 and 23% less ROM at T11-12 compared to Traditional T10-PS. CONCLUSIONS: In this FE analysis, a T10-11 MLSS at the proximal extent of T10-pelvis posterior instrumentation resulted in increased T10 and T11 cortical bone stresses, decreased discal annular stress and IDP and increased ROM at T10-11, and no change in ROM at the adjacent level. Given the complex and multifactorial nature of proximal junctional kyphosis, these results require additional biomechanical and clinical evaluations to determine the clinical utility of MLSS on the proximal junctions of thoracolumbar posterior instrumented fusions.

OBJECTIVE: Fibrin sealants are routinely used for intra-articular surgical fixation of cartilage fragments and implants. However, the mechanical properties of fibrin sealants in the context of cartilage repair are unknown. The purpose of this study was to characterize the adhesive and frictional properties of fibrin sealants using an ex vivo model. DESIGN: Native bovine cartilage-bone composites were assembled with a single application of Tisseel or Vistaseal. Composites were tested in tension and lap shear. In addition, the coefficient of friction (COF) was measured in a native cartilage annulus model alone and with minced cartilage. Finally, the effect of a double application of fibrin sealant was evaluated. RESULTS: There were no significant differences in tensile modulus, ultimate tensile strength (UTS), shear modulus, or ultimate shear strength (USS) between the 2 fibrin sealants. Both fibrin sealants demonstrated a UTS and USS of

OBJECTIVE: The purpose of this study was to determine the in vitro effects of a single exposure of bupivacaine on the mechanical properties of bovine cartilage explants at 3 weeks. DESIGN: Femoral condyle articular cartilage explants were aseptically harvested from juvenile bovine stifle joints before being exposed to chondrogenic medium containing 0.50% (wt/vol) bupivacaine, 0.25% (wt/vol) bupivacaine, or no medication (control) for 1 hour. Explants were then washed and maintained in culture in vitro for 3 weeks before testing. Cell viability, tensile and compressive mechanical properties, histological properties, and biochemical properties were then assessed. RESULTS: Explants exhibited a dose-dependent decrease in mean tensile Youngs modulus with increasing bupivacaine concentration (9.86 MPa in the controls, 6.48 MPa in the 0.25% bupivacaine group [P = 0.048], and 4.72 MPa in the 0.50% bupivacaine group [P = 0.005]). Consistent with these results, collagen content and collagen crosslinking decreased with bupivacaine exposure as measured by mass spectrometry. Compressive properties of the explants were unaffected by bupivacaine exposure. Explants also exhibited a trend toward dose-dependent decreases in viability (51.2% for the controls, 47.3% for the 0.25% bupivacaine-exposed group, and 37.0% for the 0.50% bupivacaine-exposed group [P = 0.072]). CONCLUSIONS: Three weeks after 1-hour bupivacaine exposure, the tensile properties of bovine cartilage explants were significantly decreased, while the compressive properties remained unaffected. These decreases in tensile properties corresponded with reductions in collagen content and crosslinking of collagen fibers. Physicians should be judicious regarding the intra-articular administration of bupivacaine in native joints.

As natural predators, owls fly with astonishing stealth due to the serrated feather morphology that produces advantageous flow characteristics. Traditionally, these serrations are tailored for airfoil edges with simple two-dimensional patterns, limiting their effect on noise reduction while negotiating tradeoffs in aerodynamic performance. Conversely, the intricately structured wings of cicadas have evolved for effective flapping, presenting a potential blueprint for alleviating these aerodynamic limitations. In this study, we formulate a synergistic design strategy that harmonizes noise suppression with aerodynamic efficiency by integrating the geometrical attributes of owl feathers and cicada forewings, culminating in a three-dimensional sinusoidal serration propeller topology that facilitates both silent and efficient flight. Experimental results show that our design yields a reduction in overall sound pressure levels by up to 5.5 dB and an increase in propulsive efficiency by over 20% compared to the current industry benchmark. Computational fluid dynamics simulations validate the efficacy of the bioinspired design in augmenting surface vorticity and suppressing noise generation across various flow regimes. This topology can advance the multifunctionality of aerodynamic surfaces for the development of quieter and more energy-saving aerial vehicles.

The human body represents a collection of interacting systems that range in scale from nanometers to meters. Investigations from a systems perspective focus on how the parts work together to enact changes across spatial scales, and further our understanding of how systems function and fail. Here, we highlight systems approaches presented at the 2022 Summer Biomechanics, Bio-engineering, and Biotransport Conference in the areas of solid mechanics; fluid mechanics; tissue and cellular engineering; biotransport; and design, dynamics, and rehabilitation; and biomechanics education. Systems approaches are yielding new insights into human biology by leveraging state-of-the-art tools, which could ultimately lead to more informed design of therapies and medical devices for preventing and treating disease as well as rehabilitating patients using strategies that are uniquely optimized for each patient. Educational approaches can also be designed to foster a foundation of systems-level thinking.

PURPOSE: To develop and validate a finite element (FE) model of a sacral pedicle subtraction osteotomy (S1-PSO) and to compare biomechanical properties of various multi-rod configurations to stabilize S1-PSOs. METHODS: A previously validated FE spinopelvic model was used to develop a 30° PSO at the sacrum. Five multi-rod techniques spanning the S1-PSO were made using 4 iliac screws and a variety of primary rods (PR) and accessory rods (AR; lateral: Lat-AR or medial: Med-AR). All constructs, except one, utilized a horizontal rod (HR) connecting the iliac bolts to which PRs and Med-ARs were connected. Lat-ARs were connected to proximal iliac bolts. The simulation was performed in two steps with the acetabula fixed. For each model, PSO ROM and maximum stress on the PRs, ARs, and HRs were recorded and compared. The maximum stress on the L5-S1 disc and the PSO forces were captured and compared. RESULTS: Highest PSO ROMs were observed for 4-Rods (HR + 2 Med-AR). Constructs consisting of 5-Rods (HR + 2 Lat-ARs + 1 Med-AR) and 6-Rods (HR + 2 Lat-AR + 2 Med-AR) had the lowest PSO ROM. The least stress on the primary rods was seen with 6-Rods, followed by 5-Rods and 4-Rods (HR + 2 Lat-ARs). Lowest PSO forces and lowest L5-S1 disc stresses were observed for 4-Rod (Lat-AR), 5-Rod, and 6-Rod constructs, while 4-Rods (HR + Med-AR) had the highest. CONCLUSION: In this first FE analysis of an S1-PSO, the 4-Rod construct (HR + Med-AR) created the least rigid environment and highest PSO forces anteriorly. While 5- and 6-Rods created the stiffest constructs and lowest stresses on the primary rods, it also jeopardized load transfer to the anterior column, which may not be favorable for healing anteriorly. A balance between the constructs rigidity and anterior load sharing is essential.

Hydra has a tubular bilayered epithelial body column with a dome-shaped head on one end and a foot on the other. Hydra lacks a permanent mouth: its head epithelium is sealed. Upon neuronal activation, a mouth opens at the apex of the head which can exceed the body column diameter in seconds, allowing Hydra to ingest prey larger than itself. While the kinematics of mouth opening are well characterized, the underlying mechanism is unknown. We show that Hydra mouth opening is generated by independent local contractions that require tissue-level coordination. We model the head epithelium as an active viscoelastic nonlinear spring network. The model reproduces the size, timescale and symmetry of mouth opening. It shows that radial contractions, travelling inwards from the outer boundary of the head, pull the mouth open. Nonlinear elasticity makes mouth opening larger and faster, contrary to expectations. The model correctly predicts changes in mouth shape in response to external forces. By generating innervated : nerve-free chimera in experiments and simulations, we show that nearest-neighbour mechanical signalling suffices to coordinate mouth opening. Hydra mouth opening shows that in the absence of long-range chemical or neuronal signals, short-range mechanical coupling is sufficient to produce long-range order in tissue deformations.

Biting to obtain attached benthic prey characterizes a large number of fish species on coral reefs, and is a feeding mode that contributes to important ecosystem functions. We use high-speed video to reveal the mechanisms used by a surgeonfish, Acanthurus leucosternon, to detach algae. After gripping algae in its jaws, the species pulls it by ventrally rotating both the head and the closed jaws, in a novel use of the intra-mandibular joint. These motions remain in the plane of the fish, reducing the use of a lateral head flick to detach the algae. The novel ability to bite and pull algae off the substrate without bending the body laterally minimizes exposure to high water flows, and may be an adaptation to feeding in challenging reef habitats such as the crest and flat. Therefore, our results could potentially represent a key milestone in the evolutionary history of coral reef trophodynamics.

The mammalian adult dentition is a non-renewable resource. Tooth attrition and disease must be accommodated by individuals using behavioral, physiological, and/or musculoskeletal shifts to minimize impact on masticatory performance. From a biomechanical perspective, the musculoskeletal system becomes less efficient at producing bite force for a given amount of muscle input force over an individuals life, because tooth-food contact area increases as cusps wear. In this study we ask the question: does mandibular biomechanical performance show evidence of compensation with increasing tooth wear? We use representative taxa of three carnivoran ecomorphologies (meat specialist, scavenger, bone cracker) as a study system to compare morphofunctional data on tooth macrowear, jaw depth, bite mechanical efficiency, and jaw stress during biting. No significant shifts in adult mandibular corpus dimensions occurs in the sampled taxa as canine and carnassial teeth wear. In bone cracking spotted hyenas carnassial biting mechanical efficiency increases significantly with increasing tooth wear, with no significant change in mandibular stress. Analyses of the fossil carnivore Hyaenodon suggests an increase in canine biting efficiency with increased tooth wear, but this may reflect interspecific variation or phylogenetic contingency rather than a life history shift. Overall, these findings indicate that scavenging hyaenids and felid meat specialists do not exhibit morphofunctional compensation for the decreased mechanical capability of worn and dull teeth. Behavioral modifications, rather than musculoskeletal adjustments, may instead play a major role in maintaining food acquisition and processing capabilities for individuals surviving into advanced ontogenetic age and tooth wear. These observations highlight the mammalian masticatory system as having a dynamic performance profile through its useful lifespan, and encourage a more nuanced understanding of past and present carnivore guilds by considering wear-dependent performance changes as a possible source of selection.

Copyright of Retos: Nuevas Perspectivas de Educación Física, Deporte y Recreación is the property of Federacion Espanola de Asociaciones de Docentes de Educacion Fisica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Introduction: Proprioceptive neuromuscular stimulating insoles (PNIs) enhance somatosensory information from the plantar region, thus modifying standing posture, balance, and ambulatory function. The present study investigated the short-term effects of customized PNIs on lower-limb kinematics during human locomotion. Materials and Methods: Fifteen able-bodied volunteers were recruited and first examined with clinical evaluation of postural and feet behavior. Subjects performed 3-dimensional gait analysis (GA) while walking at self-selected speed in three different conditions: baseline, subjects barefoot; placebo, subjects wearing neutral insoles; and proprioceptive, subjects wearing PNIs. Spatiotemporal and kinematics data of the main lower-limb joints were acquired through a system of six photogrammetric infrared cameras acquiring at a sampling frequency of 100 Hz. Then, acquired parameters were compared in the three different conditions. Results: We found a significant difference in the percentage of double-support phase (P = 0.022) and in ankle plantarflexion values during the toe-off phase of gait cycle (P = 0.022) between the three conditions. Post hoc analysis revealed that subjects wearing PNIs presented a significant reduction in percentage of double-support phase (P = 0.009) and reduced values of ankle plantarflexion during the toe-off phase of gait cycle (P = 0.02), compared with subjects in placebo condition. Conclusions: Results suggest that proprioceptive insoles may induce modifications of gait biomechanics in able-bodied subjects, thus modulating movement strategies during human locomotion. Clinical Relevance: These findings provide a basis for future investigation of the efficacy of these foot devices in a long-term period in able-bodied individuals and potentially in subjects with neurological impairment. [ABSTRACT FROM AUTHOR]

(1) Background: After more than a decade since their first description, Inadvertent Tooth Movements (ITMs) remain an adverse effect of orthodontic retainers without a clear etiology. To further investigate the link between ITMs and the mechanical properties of different retainers, the response upon vertical loading was compared in three retainer types (two stainless steel and one nickel–titanium). The influence of different reference teeth was also considered. (2) Methods: Three retainers (R1, R2, R3) were tested in a newly developed biomechanical analysis system (FRANS). They were bonded to 3D-printed models of the lower anterior jaw and vertically displaced up to 0.3 mm. Developing forces and moments were recorded at the center of force. (3) Results: The vertical displacement caused vertical forces (Fz) and labiolingual moments (My) to arise. These were highest in the lateral incisors (up to 2.35 ± 0.59 N and 9.27 ± 5.86 Nmm for R1; 1.69 ± 1.06 N and 7.42 ± 2.65 Nmm for R2; 3.28 ± 1.73 N and 15.91 ± 9.71 Nmm for R3) for all analyzed retainers and with the R3 retainer for all analyzed reference teeth, while the lowest Fz and My values were recorded with the R1 retainer. (4) Conclusions: Displacements of 0.2 mm and larger provided forces and moments which could be sufficient to cause unwanted torque movements, such as ITMs, in all analyzed retainers. Clinicians must be mindful of these risks and perform post-treatment checkups on patients with retainers of all materials. [ABSTRACT FROM AUTHOR]

Introduction: Neuromuscular electrostimulation (NMES) represents a therapeutic approach for addressing chronic low back pain (CLBP); however, the influence of NMES dose on muscle activity remains subject to debate. Objective: To compare the impact of two distinct NMES protocols employing Aussie current, characterized by varying dosages emphasizing time cycle alterations, on electromyographic activity within the multifidus muscles in individuals afflicted with CLBP. Methods: A randomized clinical trial encompassed 18 volunteers diagnosed with mechanical CLBP. These volunteers were randomly assigned to two NMES intervention groups with dissimilar dosages: 15 repetitions (E15) and 30 repetitions (E30 ). In both interventions, the current amplitude was tailored to individual perception and documented at the culmination of each session. Over the course of four weeks, two sessions took place per week. Electromyographic activity of the multifidus muscles was evaluated using surface electromyography before and after the intervention. The assessment focuses on both time-domain analysis using Root Mean Square (RMS) and frequency-domain analysis involving mean activation frequency (FREQ). Results: There are no interactions between the time and intervention, but there is the time effect on RMS, indicating that post-intervention muscle activity exceeded pre-intervention values in both groups. FREQ values did not exhibit statistically significant discrepancies. Conclusions: This study showed that NMES using the Aussie current is effective in increasing muscle activity in individuals with CLBP, and the results were not influenced by the different cycle times with equal volumes. [ABSTRACT FROM AUTHOR]

For terrestrial locomotion of animals and machines, physical characteristics of the substrate can strongly impact kinematics and performance. Snakes are an especially interesting system for studying substrate effects because their gait depends more on the environment than on their speed. We tested sidewinder rattlesnakes (Crotalus cerastes) on two surfaces: sand collected from their natural environment and vinyl tile flooring, an artificial surface often used to elicit sidewinding in laboratory settings. Of ten kinematic variables examined, two differed significantly between the substrates: the bodys waveform had an average of ∼17% longer wavelength on vinyl flooring (measured in body lengths), and snakes lifted their bodies an average of ∼40% higher on sand (measured in body lengths). Sidewinding may also differ among substrates in ways we did not measure (e.g. ground reaction forces and energetics), leaving open clear directions for future study.

Biaxial mechanical characterizations are the accepted approach to determine the mechanical response of many biological soft tissues. Although several computational and experimental studies have examined how experimental factors (e.g., clamped vs. suture mounting) affect the acquired tissue mechanical behavior, little is known about the role of specimen dimensions in data acquisition and the subsequent modeling. In this study, we combined our established mechanical characterization framework with an iterative size-reduction protocol to test the hypothesis that specimen dimensions affect the observed mechanical behavior of biaxial characterizations. Our findings indicated that there were non-significant differences in the peak equibiaxial stretches of tricuspid valve leaflets across four specimen dimensions ranging from 4.5×4.5mm to 9 × 9mm. Further analyses revealed that there were significant differences in the low-tensile modulus of the circumferential tissue direction. These differences resulted in significantly different constitutive model parameters for the Tong-Fung model between different specimen dimensions of the posterior and septal leaflets. Overall, our findings demonstrate that specimen dimensions play an important role in experimental characterizations, but not necessarily in constitutive modeling of soft tissue mechanical behavior during biaxial testing with the commercial CellScale BioTester.

Patients with psoriatic arthritis commonly have abnormalities of their entheses, which are the connections between tendons and bone. There are shortcomings with the use of conventional magnetic resonance imaging (MRI) sequences for the evaluation of entheses and tendons, whereas ultrashort echo time (UTE) sequences are superior for the detection of high signals, and can also be used for non-invasive quantitative assessments of these structures. The combination of UTE-MRI with an adiabatic-T1ρ preparation (UTE-Adiab-T1ρ) allows for reliable assessment of entheses and tendons with decreased susceptibility to detrimental magic angle effects. This study aimed to investigate the relationship between quantitative UTE-MRI measures and the biomechanical properties of Achilles tendons and entheses. In total, 28 tendon-enthesis sections were harvested from 11 fresh-frozen human cadaveric foot-ankle specimens (52 ± years old). Tendon-enthesis sections were scanned using the UTE-Adiab-T1ρ and UTE-T1 sequences on a clinical 3 T scanner. MRI-based measures and indentation tests were performed on the enthesis, transitional, and tensile tendon zones of the specimens. Hayes' elastic modulus showed significant inverse correlations (Spearman's) with UTE-Adiab-T1ρ in all zones (R= - 0.46, - 0.54, and - 0.61 in enthesis, transition, and tensile tendon zones, respectively). Oliver-Pharr's elastic modulus showed significant inverse correlations with UTE-Adiab-T1ρ in transition (R= - 0.52) and tensile tendon zone (R=- 0.60). UTE-T1 did not show significant correlations with the elastic modulus. UTE-MRI and elastic modulus were significantly lower in the tensile tendon compared with the enthesis regions This study highlights the potential of the UTE-Adiab-T1ρ technique for the non-invasive evaluation of tendons and enthuses.

Increasing evidence suggests that there is a pivotal role for physical force (mechanotransduction) in the initiation and/or the perpetuation of spondyloarthritis; the review contained herein examines that evidence. Furthermore, we know that damage and inflammation can limit spinal mobility, but is there a cycle created by altered spinal mobility leading to additional damage and inflammation?Over the past several years, mechanotransduction, the mechanism by which mechanical perturbation influences gene expression and cellular behaviour, has recently gained popularity because of emerging data from both animal models and human studies of the pathogenesis of ankylosing spondylitis (AS). In this review, we provide evidence towards an appreciation of the unsolved paradigm of how biomechanical forces may play a role in the initiation and propagation of AS.

Twenty-seven methods of estimating vertical ground reaction force first peak, loading rate, second peak, average, and/or time series from a single wearable accelerometer worn on the shank or approximate center of mass during running were compared. Force estimation errors were quantified for 74 participants across different running surfaces, speeds, and foot strike angles and biases, repeatability coefficients, and limits of agreement were modeled with linear mixed effects to quantify the accuracy, reliability, and precision. Several methods accurately and reliably estimated the first peak and loading rate, however, none could do so precisely (the limits of agreement exceeded ±65% of target values). Thus, we do not recommend first peak or loading rate estimation from accelerometers with the methods currently available. In contrast, the second peak, average, and time series could all be estimated accurately, reliably, and precisely with several different methods. Of these, we recommend the Pogson methods due to their accuracy, reliability, and precision as well as their stability across surfaces, speeds, and foot strike angles.

Abstract Background Individuals with subacute severe hemiplegia often undergo alternate gait training to overcome challenges in achieving walking independence. However, the ankle joint setting in a knee–ankle–foot orthosis (KAFO) depends on trunk function or paralysis stage for alternate gait training with a KAFO. The optimal degree of ankle joint freedom in a KAFO and the specific ankle joint conditions for effective rehabilitation remain unclear. Therefore, this study aimed to investigate the effects of different degrees of freedom of the ankle joint on center-of-pressure (CoP) parameters and muscle activity on the paretic side using a KAFO and to investigate the recommended setting of ankle joint angle in a KAFO depending on physical function. Methods This study included 14 participants with subacute stroke (67.4 ± 13.3 years). The CoP parameters and muscle activity of the gastrocnemius lateralis (GCL) and soleus muscles were compared using a linear mixed model (LMM) under two ankle joint conditions in the KAFO: fixed at 0° and free ankle dorsiflexion. We confirmed the relationship between changes in CoP parameters or muscle activity under different conditions and physical functional characteristics such as the Fugl–Meyer Assessment of Lower Extremity Synergy Score (FMAs) and Trunk Impairment Scale (TIS) using LMM. Results Anterior–posterior displacement of CoP (AP_CoP) (p = 0.011) and muscle activity of the GCL (p = 0.043) increased in the free condition of ankle dorsiflexion compared with that in the fixed condition. The FMAs (p = 0.004) and TIS (p = 0.008) demonstrated a positive relationship with AP_CoP. A positive relationship was also found between TIS and the percentage of medial forefoot loading time in the CoP (p

Objective: This study analysed the presence and absence of electromyographic silence during the holding phase of the flexion-relaxation of the trunk. Methodology: The electrical activity of two back muscles (i.e., longissimus and multifidus) of 10 male workers in the maintenance sector, all younger than 65, was recorded when they performed an unloaded anterior flexion of the trunk for 15 seconds. The risk of suffering from low back pain was evaluated based on the calculated flexion-relaxation ratios. Results: In the sample, the average FRRs of the longissimus and multifidus muscles were 6.47 ± 4.21 and 7.99 ± 4.71, respectively. In addition, 20% of the subjects presented values under 2.98 in the longissimus; and 40%, values under 7.21 in the multifidus—which indicates an absence of silences and possible pain. The average flexion velocity was 103.67 ± 15.56°/s; the average relaxation velocity, 98.968 ± 19.11°/s; and the average flexion angle, 106.94 ± 12.60°. Conclusion: The results of this study demonstrate that, in the long term, maintenance and general service workers may suffer from chronic low back discomfort or pain as a consequence of their daily duties

Background: For instance, forward head posture (FHP), characterized by the forward move-ment of the head relative to the spine, places significant stress on the neck and upper back muscles, disrupting the biomechanical balance of the body. Objects: The objective of this study was to probe the biomechanical effects of FHP on mus-culoskeletal health through a relative analysis of 26 adults diagnosed with FHP and 26 healthy controls. Methods: In this study, we evaluated the biomechanical impacts of FHP. Participants adjusted their head positions and underwent muscle strength tests, including electromyography assess-ments and the Biering-Sørensen test for trunk muscle endurance. Data analysis was conducted using Kinovea (Kinovea) and IBM SPSS software ver. 26.0 (IBM Co.) to compare muscle activi-ties between groups with normal and FHPs. Results: The study shows that individuals with FHP have significantly lower muscle activity, endurance, and spinal extension in the erector spinae compared to those without, highlight-ing the detrimental effects of FHP on these muscles. Conclusion: This study underscores the impact of FHP on erector spinae function and em-phasizes the need for posture correction to enhance musculoskeletal health and guide future research on intervention strategies.

Background: Individuals with subacute severe hemiplegia often undergo alternate gait training to overcome challenges in achieving walking independence. However, the ankle joint setting in a knee–ankle–foot orthosis (KAFO) depends on trunk function or paralysis stage for alternate gait training with a KAFO. The optimal degree of ankle joint freedom in a KAFO and the specific ankle joint conditions for effective rehabilitation remain unclear. Therefore, this study aimed to investigate the effects of different degrees of freedom of the ankle joint on center-of-pressure (CoP) parameters and muscle activity on the paretic side using a KAFO and to investigate the recommended setting of ankle joint angle in a KAFO depending on physical function. Methods: This study included 14 participants with subacute stroke (67.4 ± 13.3 years). The CoP parameters and muscle activity of the gastrocnemius lateralis (GCL) and soleus muscles were compared using a linear mixed model (LMM) under two ankle joint conditions in the KAFO: fixed at 0° and free ankle dorsiflexion. We confirmed the relationship between changes in CoP parameters or muscle activity under different conditions and physical functional characteristics such as the Fugl–Meyer Assessment of Lower Extremity Synergy Score (FMAs) and Trunk Impairment Scale (TIS) using LMM. Results: Anterior–posterior displacement of CoP (AP_CoP) (p = 0.011) and muscle activity of the GCL (p = 0.043) increased in the free condition of ankle dorsiflexion compared with that in the fixed condition. The FMAs (p = 0.004) and TIS (p = 0.008) demonstrated a positive relationship with AP_CoP. A positive relationship was also found between TIS and the percentage of medial forefoot loading time in the CoP (p < 0.001). Conclusions: For individuals with severe subacute hemiplegia, the ankle dorsiflexion induction in the KAFO, which did not impede the forward tilt of the shank, promotes anterior movement in the CoP and muscle activity of the GCL. This study suggests that adjusting the dorsiflexion mobility of the ankle joint in the KAFO according to improvement in physical function promotes loading of the CoP to the medial forefoot. [ABSTRACT FROM AUTHOR]

Context: Shoulder Impingement Syndrome (SIS) is a common clinical condition in general practice and overhead athletes. Alterations in the scapular position can lead to shoulder impingement syndrome. The effect of exercises on shoulder impingement syndrome is studied but the effect of Kinesiotape is not well explored. Methods: A total of 42 participants were included in the study. The subjects were assessed for SPADI, pain, proprioception, lateral scapula slide test, and pectoral minor length test at the baseline and the subjects were randomly divided into two groups. The intervention group (n = 18) received scapular taping and scapular exercises and the control group (n = 17) received scapular exercises only. Post-outcome measures were taken at 4 weeks and 12 weeks during the intervention. Repeated measures ANOVA was used for the outcome measures and Bonferroni's test was used to determine the pairwise comparisons at different measurement levels amongst experimental and control groups. Results: The study consisted of 17 males and 18 females. There was statistical significance in both groups (p < 0.01) over the 4th and 12th weeks. Pain (p < 0.01) and proprioception (p = 0.017) was also statistically significant between both the groups at 4 weeks. Conclusion: This study concludes that scapular taping can be used as an adjunct with scapular involvement. [ABSTRACT FROM AUTHOR]

Background/Aim. The clinical success of prosthetic rehabilitation that commences after the attained implant osseointegration is dependent on the influence of several factors, of which screw loosening is a frequent one, and it is highly related to inadequate tightening (torquing) using torque wrenches. Although the wrenches are initially calibrated by the manufacturer, it is of great importance to evaluate their function after usage for a certain period of time. The aim of this study was to evaluate the accuracy and repeatability of the performance of implant torque wrenches in delivering necessary torque values before and after one year of usage. Methods. Two types of wrenches were used in the study: the beam-type and the toggle-type. Four various brands of beam-type wrench were marked as Beam 1 - Beam 4, and three various brands of toggle-type wrench were marked as Toggle 1 - Toggle 3, according to their design. Torque values delivered by wrenches were measured and analyzed using the One-Sample t-test, Independent-Samples t-test, and Mann-Whitney U test. The Bland-Altman bias test was used as an index of accuracy, whereas Forkman's comparison of datasets coefficients of variation (CV) served as an index of repeatability. Results. All wrenches except new Beam 2 and Beam 3 showed differences between the average measured torque value and target torque value. Differences were found in the average measured values between all used and new wrenches. Higher bias was observed in Toggle 1, Toggle 2, and Toggle 3 brands, whereas lower bias was recorded between used and new Beam 1 and Beam 3 wrenches. When comparing the CV for used and new wrenches, Beam 1, Beam 4, Toggle 1, and Toggle 2 revealed differences, whereas the CV for Beam 2, Beam 3, and Toggle 3 did not differ significantly. Conclusion. Compared to toggle-type, the beam-type wrenches offer greater accuracy in achieving the target torque value. The torque deteriorates in all wrenches after aging/usage and is more prominent in toggle-type devices. [ABSTRACT FROM AUTHOR]

Tendons enable locomotion by transmitting high tensile mechanical forces between muscle and bone via their dense extracellular matrix (ECM). The application of extrinsic mechanical stimuli via muscle contraction is necessary to regulate healthy tendon function. Specifically, applied physiological levels of mechanical loading elicit an anabolic tendon cell response, while decreased mechanical loading evokes a degradative tendon state. Although the tendon response to mechanical stimuli has implications in disease pathogenesis and clinical treatment strategies, the cell signaling mechanisms by which tendon cells sense and respond to mechanical stimuli within the native tendon ECM remain largely unknown. Therefore, we explored the role of cell–ECM adhesions in regulating tendon cell mechanotransduction by perturbing the genetic expression and signaling activity of focal adhesion kinase (FAK) through both in vitro and in vivo approaches. We determined that FAK regulates tendon cell spreading behavior and focal adhesion morphology, nuclear deformation in response to applied mechanical strain, and mechanosensitive gene expression. In addition, our data reveal that FAK signaling plays an essential role in in vivo tendon development and postnatal growth, as FAK‐knockout mouse tendons demonstrated reduced tendon size, altered mechanical properties, differences in cellular composition, and reduced maturity of the deposited ECM. These data provide a foundational understanding of the role of FAK signaling as a critical regulator of in situ tendon cell mechanotransduction. Importantly, an increased understanding of tendon cell mechanotransductive mechanisms may inform clinical practice as well as lead to the discovery of diagnostic and/or therapeutic molecular targets. [ABSTRACT FROM AUTHOR]

The number of people who run to achieve competitive performance has increased, encouraging the scientific community to analyze the association of factors that can affect a runner performance. Is there association between running spatiotemporal and angular kinematics with the physiological markers of endurance performance during a cardiorespiratory exercise test? This was an observational cross-sectional study with 40 distance runners simultaneously submitted to a running biomechanical analysis and cardiorespiratory exercise test on a treadmill. Mixed models were developed to verify the association between angular kinematic data obtained by the Movement Deviation Profile and the running spatiotemporal data with oxygen consumption and ventilatory thresholds. Spatiotemporal variables [.e., step frequency Odds Ratio 0.09 [0.06–0.12 95 % Confidence Interval], center of mass vertical displacement Odds Ratio 0.10 [0.07–0.14 95 % Confidence Interval], and step length [Odds Ratio −0.01 [-0.01 to −0.00 95 % Confidence Interval]] were associated with VO 2. Also, step frequency Odds Ratio 1.03 [1.01–1.05 95 % Confidence Interval] was associated with the first ventilatory threshold, and angular running kinematics [Movement Deviation Profile analysis] Odds Ratio 1.47 [1.13–1.91 95 % Confidence Interval] was associated with peak of exercise during the cardiorespiratory exercise test. Our findings demonstrated that: both higher step frequency and center of mass vertical displacement are associated with the increase of oxygen demand; step frequency is associated with the first ventilatory threshold, due to the entrainment mechanism and angular kinematic parameters are associated with peak aerobic speed. Future studies could also compare the biomechanical and physiological characteristics of different groups of distance runners. This could help identify the factors that contribute to oxygen demands during running and performance across different ages, genders, and levels of competition. • Study examines running kinematics and endurance performance. • Spatiotemporal variables affect oxygen consumption and VT1. • Angular kinematics (MDP analysis) was associated with peak of exercise and speed. • Findings suggest ways to improve running economy and performance. [ABSTRACT FROM AUTHOR]

Purpose: To compare the trunk biomechanical characteristics between the sit-to-stand and stand-to-sit performed at self-selected and fast speeds in stroke survivors and healthy-matched controls. Methods: Thirty individuals (15 stroke survivors and 15 healthy-matched controls) were included. The following biomechanical characteristics were determined: peak of trunk forward flexion and time until the peak of trunk forward flexion, total duration, phase I (sit-to-stand: time spent from the beginning to seat-off; stand-to-sit: time spent from the beginning to seat-on) and II durations (sit-to-stand: time spent from seat-off to the end of the task; stand-to-sit: time spent from the seat-on to the end of the task). Two-way repeated measures ANOVA was used (α = 5%). Results: The maximum angle of trunk forward flexion and time spent until the maximum angle of trunk forward flexion in both tasks were significantly higher in stroke survivors. For both groups and speeds, phase I duration and peak of trunk forward flexion of the stand-to-sit were significantly higher than that of the sit-to-stand (11.41≤F ≤ 33.60; 0.001 ≤ p ≤ 0.002) and, phase II duration was significantly higher during the sit-to-stand than that of the stand-to-sit (21.27 ≤ F ≤ 65.10; p ≤ 0.001). Conclusions: These results confirm specific trunk biomechanical characteristics between sit-to-stand and stand-to-sit in stroke survivors and healthy-matched controls. IMPLICATIONS FOR REHABILITATION: Specific biomechanical characteristics between the sit-to-stand and stand-to-sit were confirmed in stroke survivors and healthy-matched controls at both speeds. Fast speeds showed differences that were not observed at self-selected speeds. Trunk biomechanical characteristics must be carefully evaluated and should be considered in rehabilitation programs that aim to improve sit-to-stand and stand-to-sit performance. [ABSTRACT FROM AUTHOR]

Copyright of Dental Press Journal of Orthodontics is the property of Dental Press International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: The purpose of this 3D finite element analysis was to evaluate the biomechanical effects of different materials used to fabricate occlusal devices to achieve stress distribution in simulated abutment screws, dental implants, and peri‐implant bone tissue in individuals who clench their teeth. Materials and Methods: Eight 3D models simulated a posterior maxillary bone block with three external hexagon implants (Ø4.0 × 7.0 mm) supporting a 3‐unit screw‐retained metal‐ceramic prosthesis with different crown connection (splinting), and the use of an occlusal device (OD). The OD was modeled to be 2‐mm thick. ANSYS 19.2 software was used to generate the finite‐element models in the pre‐and post‐processing phases. Simulated abutment screws and dental implants were evaluated by von Mises stress maps, and simulated bone was evaluated by maximum principal stress and microstrain maps by using a finite element software program. Results: The highest stress values in the dental implants and screws were observed in single crowns without OD (M1). Furthermore, the highest stress values and bone tissue strain were found in single crowns without OD (M1). The simulated material for the OD did not cause many discrepancies in terms of the stress magnitude in the simulated dental implant and abutment screw for both single and splinted crowns; however, more rigid materials exhibited lower stress values. Conclusion: The use of OD was effective in reducing stress in the simulated implants and abutment screws and stress and strain in the simulated bone tissue. The material used to simulate the OD influenced the biomechanical behavior of implant‐supported fixed prostheses, whereas splints with rigid materials such as PEEK and PMMA exhibited better biomechanical behavior. [ABSTRACT FROM AUTHOR]

The purpose was to investigate relationships of cumulative load and cartilage turnover biomarkers with 2-year changes in cartilage in knee osteoarthritis. From participants with Kellgren-Lawrence (KL) grades of 1 to 3, cartilage thickness and transverse relaxation time (T2) were computed from 24-month (baseline) and 48-month magnetic resonance images. Cumulative load was the interaction term of the Physical Activity Scale for the Elderly (PASE) and body mass index (BMI). Serum cartilage oligomeric matrix protein (COMP) and the nitrated form of type II collagen (Coll2-1 NO2) were collected at baseline. Multiple regressions (adjusted for baseline age, KL grade, cartilage measures, pain, comorbidity) evaluated the relationships of cumulative load and biomarkers with 2-year changes. In 406 participants (63.7 (8.7) years), interactions of biomarkers with cumulative load weakly predicted 2-year cartilage changes: (i) COMP × cumulative load explained medial tibia thickness change (R2 increased 0.062 to 0.087, p < 0.001); (ii) Coll2-1 NO2 × cumulative load explained central medial femoral T2 change (R2 increased 0.177 to 0.210, p < 0.001); and (iii) Coll2-1 NO2 × cumulative load explained lateral tibia T2 change (R2 increased 0.166 to 0.188, p < 0.001). Moderate COMP or Coll2-1 NO2 at baseline appeared protective. High COMP or Coll2-1 NO2, particularly with high BMI and low PASE, associated with worsening cartilage. Moderate serum concentrations of cartilage turnover biomarkers, at high and low physical activity, associated with maintained cartilage outcomes over 2 years. In conclusion, high concentrations of cartilage turnover biomarkers, particularly with high BMI and low physical activity, associated with knee cartilage thinning and increasing T2 over 2 years. Key Points • Higher quality cartilage may be better able to tolerate a larger cumulative load than poor quality cartilage. • Among participants enrolled in the Osteoarthritis Initiative Biomarkers Consortium Project, a representation of cumulative load exposure and its interaction with cartilage turnover biomarkers were weakly related with 2-year change in knee cartilage. • These findings suggest that cartilage turnover is a factor that modifies the relationship between loading exposure and cartilage loss in knee OA. [ABSTRACT FROM AUTHOR]

The task of transporting objects is a fundamental part of daily living activities. Previous kinematic studies focusing on tasks such as pointing, reach-to-grasp, and drinking have not fully captured the motor behaviors involved in object transportation, including placing a cup on a table or storing items in specific places. Hence, this study aimed to analyze the motor behavior associated with transporting a mug using upper limb kinematic variables. Fifteen healthy adults were instructed to transport an open-handle mug across a table. The kinematic metrics evaluated included object end-error for accuracy, frontal and lateral end-range for precision, movement time, peak velocity, time to peak velocity for control strategy, object path ratio for efficiency, and interjoint coordination. The stability of motor behavior was assessed through a test-retest analysis. The mug transporting task achieved accuracy with a radius <10 mm around the target, a peak velocity of ∼0.4 m/s, a control strategy where acceleration time constituted about 30% of the movement time, and a slightly curved trajectory. The test-retest analysis confirmed stable motor behavior across all kinematic metrics (ICCs > 0.75). Thus, the mug transporting task exhibited unique and stable kinematic characteristics, distinguishing it from non-transport activities and effectively mirroring transporting activities of daily living. [ABSTRACT FROM AUTHOR]

ObjectiveBiomechanics represents the common final output through which all biopsychosocial constructs of back pain must pass, making it a rich target for phenotyping. To exploit this feature, several sites within the NIH Back Pain Consortium (BACPAC) have developed biomechanics measurement and phenotyping tools. The overall aims of this article were to: 1) provide a narrative review of biomechanics as a phenotyping tool; 2) describe the diverse array of tools and outcome measures that exist within BACPAC; and 3) highlight how leveraging these technologies with the other data collected within BACPAC could elucidate the relationship between biomechanics and other metrics used to characterize low back pain (LBP).MethodsThe narrative review highlights how biomechanical outcomes can discriminate between those with and without LBP, as well as among levels of severity of LBP. It also addresses how biomechanical outcomes track with functional improvements in LBP. Additionally, we present the clinical use case for biomechanical outcome measures that can be met via emerging technologies.ResultsTo answer the need for measuring biomechanical performance, our "Results" section describes the spectrum of technologies that have been developed and are being used within BACPAC.Conclusion and future directionsThe outcome measures collected by these technologies will be an integral part of longitudinal and cross-sectional studies conducted in BACPAC. Linking these measures with other biopsychosocial data collected within BACPAC increases our potential to use biomechanics as a tool for understanding the mechanisms of LBP, phenotyping unique LBP subgroups, and matching these individuals with an appropriate treatment paradigm.

OBJECTIVE: We aimed to explore the cross-sectional relation of unilateral knee pain severity and temporal asymmetry during walking and to determine relations of temporal asymmetry during walking to 2-year changes in ipsilateral and contralateral knee pain in those with mild-to-moderate unilateral knee pain. METHODS: The Multicenter Osteoarthritis Study is a prospective cohort study of adults with or at risk for knee osteoarthritis. The current study included participants with unilateral knee pain. Gait was assessed during self-selected and fast walking at baseline. Knee pain was assessed at baseline and 2 years. We calculated limb symmetry indices (LSIs; nonpainful limb/painful limb × 100) for stance, single-limb support time, and double-limb support time, then examined their relations to unilateral knee pain severity, incident contralateral knee pain, and persistent ipsilateral knee pain. RESULTS: Unilateral knee pain severity was not associated with temporal asymmetry during self-selected or fast walking. At 2 years, 17.1% of participants had incident contralateral knee pain and 51.4% had persistent ipsilateral knee pain. For self-selected walking, greater LSIs (i.e., longer time on the nonpainful limb) for stance and single-limb support time were associated with decreased odds of incident contralateral knee pain. Measures of temporal asymmetry were not associated with persistent ipsilateral knee pain, except for single-limb support time during fast walking. CONCLUSION: For those with unilateral knee pain, temporal asymmetry during walking is not associated with pain severity. However, select measures of stance and single-limb support time during self-selected and fast walking relate to longitudinal knee pain outcomes.

Birds use their legs and wings when transitioning from aerial to ground locomotion during landing. To improve our understanding of the effects of footpad dermatitis (FPD) and keel bone fracture (KBF) upon landing biomechanics in laying hens, we measured ground-reaction forces generated by hens (n = 37) as they landed on force plates (Bertec Corporation, Columbus, OH) from a 30 cm drop or 170 cm jump in a single-blinded placebo-controlled trial using a cross-over design where birds received an anti-inflammatory (meloxicam, 5 mg/kg body mass) or placebo treatment beforehand. We used generalized linear mixed models to test for effects of health status, treatment and their interaction on landing velocity (m/s), maximum resultant force (N), and impulse (force integrated with respect to time [N s]). Birds with FPD and KBF tended to show divergent alterations to their landing biomechanics when landing from a 30 cm drop, with a higher landing velocity and maximum force in KBF compared to FPD birds, potentially indicative of efforts to either reduce the use of their wings or impacts on inflamed footpads. In contrast, at 170 cm jumps fewer differences between birds of different health statuses were observed likely due to laying hens being poor flyers already at their maximum power output. Our results indicate that orthopedic injuries, apart from being welfare issues on their own, may have subtle influences on bird mobility through altered landing biomechanics that should be considered.

PurposeBecause different targets are used for internal-external rotation, an asymmetric baseplate designed for mechanical alignment may lead to under-coverage and concomitant posterior rim loading in the lateral compartment following unrestricted kinematic alignment (KA) TKA. Recognizing that such loading can lead to premature wear and/or subsidence, our aim was to determine the cause(s) so that occurrence could be remedied. Our hypothesis was that baseplate design features such as asymmetric shape when aligned in KA would consistently contribute to posterior rim loading in the lateral compartment.MethodsBased on analysis of fluoroscopic images of 50 patients performing dynamic, weight bearing deep knee bend and step up and of postoperative CT images, five possible causes were investigated. Causes included internal rotation of the baseplate when positioned in KA; posterior position of the lateral femoral condyle at extension; internal tibial rotation with flexion; internal rotational deviation of the baseplate from the KA rotation target; and posterior slope.ResultsThe incidence of posterior rim loading was 18% (9 of 50 patients). When positioned in KA, the asymmetric baseplate left 15% versus 10% of the AP depth of the lateral compartment uncovered posteriorly for posterior rim loading and non-posterior rim loading groups, respectively (p = 0.009). The lateral femoral condyle at extension was more posterior by 4 mm for the posterior rim loading group (p = 0.003).ConclusionsPosterior rim loading in the lateral compartment was caused in part by the asymmetric design of the tibial baseplate designed for mechanical alignment which was internally rotated when positioned in KA thus under-covering a substantial percentage of the posterior lateral tibia. This highlights the need for new, asymmetric baseplates designed to maximize coverage when used in KA.Level of evidenceIII.

Angelman Syndrome is a rare neurodevelopmental disorder characterized by developmental delay, lack of speech, seizures, intellectual disability, characteristic behavior, and movement disorders. Clinical gait analysis provides the opportunity for movement quantification to investigate an observed maladaptive change in gait pattern and offers an objective outcome of change. Pressure-sensor-based technology, inertial and activity monitoring, and instrumented gait analysis (IGA) were employed to define motor abnormalities in Angelman syndrome. Temporal-spatial gait parameters of persons with Angelman Syndrome (pwAS) show deficiencies in gait performance through walking speed, step length, step width, and walk ratio. pwAS walk with reduced step lengths, increased step width, and greater variability. Three-dimensional motion kinematics showed increased anterior pelvic tilt, hip flexion, and knee flexion. PwAS have a walk ratio more than two standard deviations below controls. Dynamic electromyography showed prolonged activation of knee extensors, which was associated with a decreased range of motion and the presence of hip flexion contractures. Use of multiple gait tracking modalities revealed that pwAS exhibit a change in gait pattern to a flexed knee gait pattern.  Cross-sectional studies of individuals with AS show a regression toward this maladaptive gait pattern over development in pwAS ages 4-11. PwAS unexpectedly did not have spasticity associated with change in gait pattern. Multiple quantitative measures of motor patterning may offer early biomarkers of gait decline consistent with critical periods of intervention, insight into appropriate management strategies, objective primary outcomes, and early indicators of adverse events.

ABSTRACT Objective: This study evaluated the force system generated by the Memory Titanol® spring (MTS) with different preactivation bends using an orthodontic force tester (OFT). Methods: Three preactivations were tested using a 0.017 × 0.022-in stainless steel (SS) wire and a 0.018 × 0.025-in NiTi segment, with an activation of 30º in the posterior segment (β), with 0º (Group 1 [G1]), 45º (Group 2 [G2]), and 60º (Group 3 [G3]) in the anterior segment (α). Results: The molars showed extrusion values of −1.33 N for G1 and −0.78 N for G2, and an intrusion value of 0.33 N for G3. The force in the premolars was intrusive with a variation of 1.34 N for G1 and 0.77 N for G2; and extrusive with a variation of −0.31 N for G3. Regarding the upright moment (Ty) of the molar, a distal moment was observed with values of 53.45 N.mm for G1 and 19.87 N.mm for G2, while G3 presented a mesial moment of −6.23 N.mm. G1, G2, and G3 all exhibited distal premolar moments (Ty) of 3.58, 2.45, and 0.68 N.mm, respectively. Conclusions: The tested preactivations exerted an extrusive force in G1 and G2 and an intrusive force in G3 during molar vertical movement. The premolar region in G1 and G2 showed intrusive force and distal moment.

Purpose: To evaluate the effectiveness of extra-short implants compared to standard-length implants in graft regions at different longitudinal follow-up times. Materials and Methods: A systematic review was performed, following PRISMA criteria. LILACS, MEDLINE/PubMed, Cochrane Library, and Embase databases, including gray literature and manual searches, were conducted without language or date restrictions. Study selection, risk of bias (Rob 2.0), quality of evidence (GRADE), and data collection were performed by two independent reviewers. Disagreements were resolved by a third reviewer. Data were combined using the random-effects model. Results: A total of 1,383 publications were identified, including 11 publications from 4 randomized clinical trials that evaluated 567 implants (276 extra-short and 291 regular implants with graft) in 186 patients. The meta-analysis showed that losses (risk ratio [RR]: 1.24; 95% CI: 0.53 to 2.89; P = .62; I2: 0%) and prosthetic complications (RR: 0.89; 95% CI: 0.31 to 2.59; P = .83; I2: 0%) were similar in both groups. Biologic complications were significantly higher in regular implants with graft (RR: 0.48; CI: 0.29 to 0.77; P = .003; I2: 18%), which also had lower peri-implant bone stability in the mandible at the 12-month follow-up (mean deviation [MD]: -0.25; CI: -0.36 to 0.15; P < .00001; I2 = 0%). Conclusion: Extra-short implants showed similar effictiveness compared to standard-length implants placed in grafted regions at different longitudinal follow-up times and present reduced biologic complications, shorter treatment times, and greater peri-implant bone crest stability. [ABSTRACT FROM AUTHOR]

The giant rorqual whales are believed to have a massive food turnover driven by a high-intake lunge feeding style aptly described as the worlds largest biomechanical action. This high-drag feeding behavior is thought to limit dive times and constrain rorquals to target only the densest prey patches, making them vulnerable to disturbance and habitat change. Using biologging tags to estimate energy expenditure as a function of feeding rates on 23 humpback whales, we show that lunge feeding is energetically cheap. Such inexpensive foraging means that rorquals are flexible in the quality of prey patches they exploit and therefore more resilient to environmental fluctuations and disturbance. As a consequence, the food turnover and hence the ecological role of these marine giants have likely been overestimated.

BackgroundCurrent approaches to characterizing deficits in upper limb movements after stroke typically focus either on changes in a functional measure, for example, how well a patient can complete a task, or changes in impairment, for example, isolated measurements of joint range of motion. However, there can be notable dissociations between static measures of impairment versus those of function.ObjectiveWe develop a method to measure upper limb joint angles during performance of a functional task and use measurements to characterize joint impairment in the context of a functional task.MethodsWe developed a sensorized glove that can precisely measure select finger, hand, and arm joints while participants complete a functional reach-to-grasp task involving manipulation of a sensorized object.ResultsWe first characterized the accuracy and precision of the glove's joint angle measurements. We then measured joint angles in neurologically intact participants (n = 4 participants, 8 limbs) to define the expected distribution of joint angle variation during task execution. These distributions were used to normalize finger, hand, and arm joint angles in stroke participants (n = 6) as they performed the task. We present a participant-specific visualization of functional joint angle variance which illustrated that stroke participants with nearly identical clinical scores exhibited unique patterns of joint angle variation.ConclusionsOverall, measuring individual joint angles in the context of a functional task may inform whether changes in functional scores over recovery or rehabilitation are driven by changes in impairment or the development of compensatory strategies, and provide a quantified path toward personalized rehabilitative therapy.

Rorqual foraging behavior varies with species, prey type and foraging conditions, and can be a determining factor for their fitness. Little is known about the foraging ecology of Rice's whales (Balaenoptera ricei), an endangered species with a population of fewer than 100 individuals. Suction cup tags were attached to two Rice's whales to collect information on their diving kinematics and foraging behavior. The tagged whales primarily exhibited lunge-feeding near the sea bottom and to a lesser extent in the water-column and at the sea surface. During 6-10 min foraging dives, the whales typically circled their prey before executing one or two feeding lunges. Longer duration dives and dives with more feeding-lunges were followed by an increase in their breathing rate. The median lunge rate of one lunge per dive of both animals was much lower than expected based on comparative research on other lunge-feeding baleen whales, and may be associated with foraging on fish instead of krill or may be an indication of different foraging conditions. Both animals spent extended periods of the night near the sea surface, increasing the risk for ship strike. Furthermore, their circling before lunging may increase the risk for entanglement in bottom-longline fishing gear. Overall, these data show that Rice's whale foraging behavior differs from other lunge feeding rorqual species and may be a significant factor in shaping our understanding of their foraging ecology. Efforts to mitigate threats to Rice's whales will benefit from improved understanding of patterns in their habitat use and fine-scale ecology.