Search

We improve the aerodynamic performance of a simplified vertical-axis wind turbine (VAWT) using a biomimetic flap, inspired by the movement of secondary feathers of a bird's wing at landing (Liebe 1979 Aerokurier 12 54). The VAWT considered has three NACA0018 straight blades at the Reynolds number of80000based on the turbine diameter and free-stream velocity. The biomimetic flap is made of a rigid rectangular curved plate, and its streamwise length is 0.2 c and axial (spanwise) length is the same as that of blade, where c is the blade chord length. This device is installed on the inner surface of each blade. Its one side is attached near the blade leading edge (pivot point), and the other side automatically rotates around the pivot point (without external power input) in response to the surrounding flow field during blade rotation. The flap increases the time-averaged power coefficient by 88% at the tip-speed ratio of 0.8, when its pivot point is at 0.1 c downstream from the blade leading edge. While the torque on the blade itself does not change even in the presence of the flap, the flap itself generates additional torque, thus increasing the overall power coefficient. The phase analysis indicates that the power coefficient of VAWT significantly increases during flap opening to full deployment through the interaction with vortices separated from the blade leading edge. When the pivot point of flap is farther downstream from the leading edge or the flap operates at a high tip-speed ratio, the performance of the flap diminishes due to its weaker interaction with the separating vortices., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

In this paper, we present a design optimization framework for a fluidic artificial muscle (FAM) bundle subject to geometric constraints. The architecture of natural skeletal muscles allows for compact actuation packaging by distributing a substantial number of actuation elements or muscle fiber motor units, which are to be arranged, oriented, and sized in various formations. Many researchers have drawn inspiration from these natural muscle architectures to assist in designing soft robotic systems safe for human-robot interaction. Although there are known tradeoffs identified between different muscle architectures, this optimization framework offers a method to map these architectural tradeoffs to soft actuator designs. The actuation elements selected for this study are FAMs or McKibben muscles due to their inherent compliance, cheap construction, high force-to-weight ratio, and muscle-like force-contraction behavior. Preceding studies analytically modeled the behavior of arranging FAMs in parallel, asymmetrical unipennate, and symmetrical bipennate topologies inspired by the fiber architectures found in human muscle tissues. A more recent study examined the implications of spatial constraints on bipennate FAM bundle actuation and found that by careful design, a bipennate FAM bundle can produce more force, contraction, stiffness, and work output than that of a parallel FAM bundle under equivalent spatial bounds. This multi-objective genetic algorithm-based optimization framework is used to realize desirable topological properties of a FAM bundle for maximum force and stroke for a given spatial envelope. The results help identify tradeoffs to inform design decisions based on the force and stroke demand from the desired operating task. This study further demonstrates how the desirable topological properties of the optimized FAM bundle change with different spatial bounds., (Creative Commons Attribution license.)

The exploration of adaptive robotic systems capable of performing complex tasks in unstructured environments, such as underwater salvage operations, presents a significant challenge. Traditional rigid grippers often struggle with adaptability, whereas bioinspired soft grippers offer enhanced flexibility and adaptability to varied object shapes. In this study, we present a novel bioinspired soft robotic gripper integrated with a shape memory alloy (SMA) actuated suction cup, inspired by the versatile grasping strategies of octopus arms and suckers. Our design leverages a tendon-driven composite arm, enabling precise bending and adaptive grasping, combined with SMA technology to create a compact, efficient suction mechanism. We develop comprehensive kinematic and static models to predict the interaction between arm bending deflection and suction force, thereby optimizing the gripper's performance. Experimental validation demonstrates the efficacy of our integrated design, highlighting its potential for advanced manipulation tasks in challenging environments. This work provides a new perspective on the integration of bioinspired design principles with smart materials, paving the way for future innovations in adaptive robotic systems., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Most birds can navigate seamlessly between aerial and terrestrial environments. Whereas the forelimbs evolved into wings primarily for flight, the hindlimbs serve diverse functions such as walking, hopping and leaping, and jumping take-off for transitions into flight 1 . These capabilities have inspired engineers to aim for similar multimodality in aerial robots, expanding their range of applications across diverse environments. However, challenges remain in reproducing multimodal locomotion, across gaits with distinct kinematics and propulsive characteristics, such as walking and jumping, while preserving lightweight mass for flight. This trade-off between mechanical complexity and versatility 2 limits most existing aerial robots to only one additional locomotor mode 3-5 . Here we overcome the complexity-versatility trade-off with RAVEN (Robotic Avian-inspired Vehicle for multiple ENvironments), which uses its bird-inspired multifunctional legs to jump rapidly into flight, walk on the ground, and hop over obstacles and gaps similar to the multimodal locomotion of birds. We show that jumping for take-off contributes substantially to the initial flight take-off speed 6-9 and, remarkably, that it is more energy efficient than taking off without the jump. Our analysis suggests an important trade-off in mass distribution between legs and body among birds adapted for different locomotor strategies, with greater investment in leg mass among terrestrial birds with multimodal gait demands. Multifunctional robot legs expand the opportunities to deploy traditional fixed-wing aircraft in complex terrains through autonomous take-offs and multimodal gaits., Competing Interests: Competing interests: The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

This study develops a biomimetic soft octopus suction device with integrated self-sensing capabilities designed to enhance the precision and safety of cardiac surgeries. The device draws inspiration from the octopus's exceptional ability to adhere to various surfaces and its sophisticated proprioceptive system, allowing for real-time adjustment of adhesive force. The research integrates thin-film pressure sensors into the soft suction cup design, emulating the tactile capabilities of an octopus's sucker to convey information about the contact environment in real time. Signals from sensors within soft materials exhibiting complex strain characteristics are processed and interpreted using the grey wolf optimizer-back propagation (GWO-BP) algorithm. The tissue stabilizer is endowed with the self-sensing capabilities of biomimetic octopus suckers, and real-time feedback on the adhesion state is provided. The embedding location of the thin-film pressure sensors is determined through foundational experiments with flexible substrates, standard spherical tests, and biological tissue trials. The newly fabricated suction cups undergo compression pull-off tests to collect data. The GWO-BP algorithm model accurately identifies and predicts the suction cup's adhesion force in real time, with an error rate below 0.97% and a mean prediction time of 0.0027 s. Integrating this technology offers a novel approach to intelligent monitoring and attachment assurance during cardiac surgeries. Hence, the probability of potential cardiac tissue damage is reduced, with future applications for integrating intelligent biomimetic adhesive soft robotics.

Insects' flight is imbued with endless mysteries, offering valuable inspiration to the flapping-wing robots. Particularly, the multi-mode wingbeat motion such as flapping, sweeping and twisting in coordination presents advantages in promoting unsteady aerodynamics and enhancing lift force. To achieve the flapping-twisting-sweeping motion capability, this paper proposes an at-scale three-degree-of-freedom (3-DOF) mechanism driven by three piezoelectric actuators, which consists of three four-bar mechanisms and a parallel spherical mechanism. Compliant hinges are utilized as rotating joints for power transmission. The DOF and the kinematics analysis are performed. The aerodynamic model of the wing and the mechanical model of the compliant hinges are considered to investigate the required driving force response of the mechanism with wing loads. By employing nonlinear programming techniques, the geometric parameters of three piezoelectric actuators are reverse-designed to match the dynamic response of the mechanism in two flapping conditions. The significance of this work lies in proposing a novel concept of an at-scale multi-DOF wingbeat mechanism, demonstrating the feasibility of this mechanism to mimic the flexible and multi-mode wingbeat movement of insects, and providing an initial mechanism-drive solution., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

This paper presents a numerical investigation into the aerodynamic characteristics and fluid dynamics of a flying snake-like model employing vertical bending locomotion during aerial undulation in steady gliding. In addition to its typical horizontal undulation, the modeled kinematics incorporates vertical undulations and dorsal-to-ventral bending movements while in motion. Using a computational approach with an incompressible flow solver based on the immersed-boundary method, this study employs topological local mesh refinement mesh blocks to ensure the high resolution of the grid around the moving body. Initially, we applied a vertical wave undulation to a snake model undulating horizontally, investigating the effects of vertical wave amplitudes (ψm). The vortex dynamics analysis unveiled alterations in leading-edge vortices formation within the midplane due to changes in the effective angle of attack resulting from vertical bending, directly influencing lift generation. Our findings highlighted peak lift production atψm=2.5∘and the highest lift-to-drag ratio (L/D) atψm=5∘, with aerodynamic performance declining beyond this threshold. Subsequently, we studied the effects of the dorsal-ventral bending amplitude (ψDV), showing that the tail-up/down body posture can result in different fore-aft body interactions. Compared to the baseline configuration, the lift generation is observed to increase by 17.3% atψDV= 5°, while a preferable L/D is found atψDV= -5°. This study explains the flow dynamics associated with vertical bending and uncovers fundamental mechanisms governing body-body interaction, contributing to the enhancement of lift production and efficiency of aerial undulation in snake-inspired gliding., (Creative Commons Attribution license.)

The robotic fish utilizes a bio-inspired undulatory propulsion system to achieve high swimming performance. However, significant roll motion has been observed at the head when the tail oscillates at certain frequencies, adversely affecting both perception accuracy and propulsion efficiency. In this paper, the roll torque acting on the robotic fish is theoretically analyzed and decomposed into gravitational, inertial, and hydrodynamic components. Resonance is identified as a key factor amplifying the roll response. To mitigate this roll and enhance stability, a passive roll absorber based on tuned mass damper is designed. A simplified rolling structure is dynamically modeled to optimize absorber parameters. Experiments are conducted to quantify the roll torque experienced by the robotic fish, with the effectiveness of the absorber verified on both the simplified model and the robotic fish. Results show that the maximum roll angle of the simplified system under harmonic load decreases from 98° to29∘, representing a reduction of over 70%, while a 25.1% reduction is achieved on the robotic fish., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Social robots have been widely used to deliver emotional, cognitive and social support to humans. The exchange of affective gestures, instead, has been explored to a lesser extent, despite phyisical interaction with social robots could provide the same benefits as human-human interaction. Some studies that explored the touch and hugs gestures were found in literature, but there are no studies that investigate the possibility of delivering realistic caress gestures, which are, in turn, the easiest affective gestures that could be delivered with a robot. The first objective of this work was to study the kinematic and dynamic features of the caress gesture by conducting experimental acquisitions in which ten healthy volunteers were asked to caress the cheek of a mannequin in two conditions, i.e. standing and sitting. Average motion and force features were then analyzed and used to generate a realistic caress gesture with an anthropomorphic robot, with the aim of assessing the feasibility of reproducing the caress gesture with a robotic device. In addition, twenty-six healthy volunteers evaluated the anthropomorphism and perceived safety of the reproduced affective gesture by answering the Godspeed Questionnaire Series and a list of statements on the robot motion. The gesture reproduced by the robot was similar to the caress gesture performed by healthy volunteers both in terms of hand trajectory and orientation, and exchanged forces. Overall, volunteers perceived the robot motion as safe and positive emotions were elicited. The proposed approach could be adapted to humanoid robots to improve the perceived anthropomorphism and safety of the caress gesture., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Embedded, flexible, multi-sensor sensing networks have shown the potential to provide soft robots with reliable feedback while navigating unstructured environments. Time delay associated with extracting information from these sensing networks and the complexity of constructing them are significant obstacles to their development. This paper presents a novel enhancement to an existing class of embedded sensor network with the potential to overcome these challenges. In its original version, this sensor network extracts information from multiple reactive sensors on a two-wire electrical circuit simultaneously. This paper proposes to change the excitation signal applied to this sensor network to a binary signal. This change offers two key advantages: it provides the ability to employ small, inexpensive microcontrollers and results in a faster data extraction process. The potential of this enhanced system is demonstrated here with a proof of concept implementation. The self-inductance of all inductance-based sensors within this proof of concept sensor network can be measured at a rate of over 5000 times per second with an average measurement error of less than 2%., (Creative Commons Attribution license.)

Bird flight is often characterized by outstanding aerodynamic efficiency, agility and adaptivity in dynamic conditions. Feathers play an integral role in facilitating these aspects of performance, and the benefits feathers provide largely derive from their intricate and hierarchical structures. Although research has been attempted on developing membrane-type artificial feathers for bio-inspired aircraft and micro air vehicles (MAVs), fabricating anatomically accurate artificial feathers to fully exploit the advantages of feathers has not been achieved. Here, we present our 3D printed artificial feathers consisting of hierarchical vane structures with feature dimensions spanning from 10 -2 to 10 2 mm, which have remarkable structural, mechanical and aerodynamic resemblance to natural feathers. The multi-step, multi-scale 3D printing process used in this work can provide scalability for the fabrication of artificial feathers tailored to the specific size requirements of aircraft wings. Moreover, we provide the printed feathers with embedded aerodynamic sensing ability through the integration of customized piezoresistive and piezoelectric transducers for strain and vibration measurements, respectively. Hence, the 3D printed feather transducers combine the aerodynamic advantages from the hierarchical feather structure design with additional aerodynamic sensing capabilities, which can be utilized in future biomechanical studies on birds and can contribute to advancements in high-performance adaptive MAVs., (Creative Commons Attribution license.)

Nociceptors, crucial sensory receptors within biological systems, are essential for survival in diverse and potentially hazardous environments. Efforts to replicate nociceptors through advanced electronic devices, such as memristors and neuromorphic transistors, have achieved limited success, capturing basic nociceptive functions while more advanced characteristics like various forms of central sensitization and analgesic effect remain out of reach. Here, we introduce a vertical multigate, multichannel electrolyte-gated transistor (Vm-EGT), designed to mimic nociceptors. Utilizing the hybrid mechanism combining electric-double-layer (EDL) with ion intercalation/deintercalation in EGTs, our approach successfully replicates peripheral sensitization and desensitization characteristics of nociceptors. The intricate multigate and multichannel design of the Vm-EGT enables the emulation of more advanced nociceptive functionalities, including central sensitization and analgesic effect. Furthermore, we demonstrate that by exploiting the inherent current-voltage relationship, the Vm-EGT can simulate these advanced nociceptive features and seamlessly transition between them. Integrating a Vm-EGT with a thermistor and a heating plate, we have developed an artificial thermal nociceptor that closely mirrors the sensory attributes of its biological counterpart. Our approach significantly advances the emulation of nociceptors, providing a basis for the development of sophisticated artificial sensory systems and intelligent robotics.

Bird-like flapping-wing aerial vehicles (BFAVs) have attracted significant attention due to their advantages in endurance, range, and load capacity. For a long time, biologists have been studying the enigma of bird flight to understand its mechanism. In contrast, aviation designers focus more on bionic flight systems. This paper presents a comprehensive review of the development of BFAV design. The study aims to provide insights into building a flyable model from the perspective of aviation designers, focusing on the methods in the process of overall design, flapping wing design and drive system design. The review examines the annual progress of flight-capable BFAVs, analyzing changes in prototype size and performance over the years. Additionally, the paper highlights various applications of these vehicles. Furthermore, it discusses the challenges encountered in BFAV design and proposes several possible directions for future research, including perfecting design methods, improving component performance, and promoting practical application. This review will provide essential guidelines and insights for designing BFAVs with higher performance., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

In robotics, particularly for autonomous navigation and human-robot collaboration, the significance of unconventional imaging techniques and efficient data processing capabilities is paramount. The unstructured environments encountered by robots, coupled with complex missions assigned to them, present numerous challenges necessitating diverse visual functionalities, and consequently, the development of multifunctional robotic vision systems has become indispensable. Meanwhile, rich diversity inherent in animal vision systems, honed over evolutionary epochs to meet their survival demands across varied habitats, serves as a profound source of inspirations. Here, recent advancements in multifunctional robotic vision systems drawing inspiration from natural ocular structures and their visual perception mechanisms are delineated. First, unique imaging functionalities of natural eyes across terrestrial, aerial, and aquatic habitats and visual signal processing mechanism of humans are explored. Then, designs and functionalities of bio-inspired electronic eyes are explored, engineered to mimic key components and underlying optical principles of natural eyes. Furthermore, neuromorphic image sensors are discussed, emulating functional properties of synapses, neurons, and retinas and thereby enhancing accuracy and efficiency of robotic vision tasks. Next, integration examples of electronic eyes with mobile robotic/biological systems are introduced. Finally, a forward-looking outlook on the development of bio-inspired electronic eyes and neuromorphic image sensors is provided., (© 2024 Wiley‐VCH GmbH.)

Visual perception has profound effects on human decision-making and emotional responses. Replicating the functions of the human visual system through device development has been a constant pursuit in recent years. However, to fully simulate the various functions of the human visual system, it is often necessary to integrate multiple devices with different functions, resulting in complex, large-volume device structures and increased power consumption. Here, an optoelectronic transistor with comprehensive visual functions is introduced. By coupling diverse photoreceptive properties of the channel and electrical regulation through charge injection/ferroelectric switching from the hafnium-based gate, the devices can simulate functions of both photoreceptors in the retina and synapses in the visual cortex. A device array is constructed to confirm the perceptual functions of cone and rod cells. Subsequently, color discrimination and recognition for color images are achieved by combining the tunable perception and synapse functions. Then an intelligent traffic judgment system with this all-in-one device is developed, which is capable of making judgments and decisions regarding traffic signals and pedestrian movements. This work provides a potential solution for developing compact and efficient devices for the next-generation bio-inspired visual system., (© 2024 Wiley‐VCH GmbH.)

Soft robots spark a revolution in human-machine interaction. However, developing high-performance soft actuators remains challenging due to trade-offs among output force, driving distance, control precision, safety, and compliance. Here, addressing the lack of long-distance, high-precision flexible linear actuators, an innovative pneumatic flexible linear actuator (PFLA) is introduced, inspired by the smooth and controlled process observed in snakes ingesting sizable food, such as eggs. This PFLA combines a soft tube, emulating the snake's body cavity, with a pneumatically driven piston. Through the joint modulation of moving resistance and driving force by pneumatic pressure, the PFLA exhibits exceptional motion control capabilities, including self-holding without pressure supply, smooth low-speed motion (down to 0.004 m s -1 ), high-speed motion (up to 5.6 m s -1 ) with low air pressure demand, and a self-protection mechanism. Highlighting its adaptability and versatility, the PFLA finds applications in various settings, including a wearable assistive devices, a manipulator capable of precise path tracking and positioning, and rapid transportation in diverse environments for pipeline inspection and firefighting. This PFLA combines biomimetic principles with sophisticated fluidic actuation to achieve long-distance, flexible, precise, and safe actuation, offering a more adaptive solution for force/motion transmission, particularly in challenging environments., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

With the advancement of modern medical and brain-computer interface devices, flexible artificial nociceptors with tactile perception hold significant scientific importance and exhibit great potential in the fields of wearable electronic devices and biomimetic robots. Here, a bioinspired artificial intelligent nociceptive alarm system integrating sensing monitoring and transmission functions is constructed using a silk fibroin (SF) fibrous memristor. This memristor demonstrates high stability, low operating power, and the capability to simulate synaptic plasticity. As a result, an artificial pressure nociceptor based on the SF fibrous memristor can detect both fast and chronic pain and provide a timely alarm in the event of a fall or prolonged immobility of the carrier. Further, an array of artificial pressure nociceptors not only monitors the pressure distribution across various parts of the carrier but also provides direct feedback on the extent of long-term pressure to the carrier. This work holds significant implications for medical support in biological carriers or targeted maintenance of electronic carriers.

Recent advancements in flexible electronics have highlighted their potential in biomedical applications, primarily due to their human-friendly nature. This study introduces a new flexible electronic system designed for motion sensing in a biomimetic three-dimensional (3D) environment. The system features a self-healing gel matrix (chitosan-based hydrogel) that effectively mimics the dynamics of the extracellular matrix (ECM), and is integrated with a highly sensitive thin-film resistive strain sensor, which is fabricated by incorporating a cross-linked gold nanoparticle (GNP) thin film as the active conductive layer onto a biocompatible microphase-separated polyurethane (PU) substrate through a clean, rapid, and high-precision contact printing method. The GNP-PU strain sensor demonstrates high sensitivity (a gauge factor of ∼50), good stability, and waterproofing properties. The feasibility of detecting small motion was evaluated by sensing the beating of human induced pluripotent stem cell (hiPSC)-derived cardiomyocyte spheroids embedded in the gel matrix. The integration of these components exemplifies a proof-of-concept for using flexible electronics comprising self-healing hydrogel and thin-film nanogold in cardiac sensing and offers promising insights into the development of next-generation biomimetic flexible electronic devices.

Soft peristaltic pumps, which use soft ring actuators instead of mechanical pistons or rollers, offer advantages in transporting liquids with non-uniform solids, such as slurry, food, and sewage. Recent advances in 3D printing with flexible thermoplastic polyurethane (TPU) present the potential for single-step fabrication of these pumps, distinguished from handcrafted, multistep traditional silicone casting methods. However, because of the relatively high hardness of TPU, TPU-based soft peristaltic pumps contract insufficiently and thus cannot perform as well as silicone-based ones. Improving the performance is crucial for fully automated, one-step manufactured soft pumps to lead to industrial use. This study aims to enhance TPU-based soft pumps through bioinspired design. Specifically, it proposed a design inspired by embryonic tubular hearts, in contrast to previous studies that mimicked digestive tracts. The new design facilitated long-axis stretching of an elliptical lumen during non-concentric contractile motion, akin to embryonic tubular hearts. The design was optimized for ring actuators and pumps 3D-printed with shore hardness 85 A TPU filament. The ring actuator achieved over 99% lumen closure with the best designs. The soft pumps transported water at flow rates of up to 218 ml min -1 and generated a maximum discharge pressure of 355 mm Hg, comparable to the performance of blood pumps used in continuous renal replacement therapy., (Creative Commons Attribution license.)

Robots support and facilitate tasks in all life fields. Soft robots specifically have the advantages of inherent compliance, safe interaction and flexible deformability. Soft pneumatic network (Pneu-Net) is a soft pneumatic actuator (SPA) composed of network of chambers that is actuated by pneumatic power. Soft Pneu-Net fits the human interface applications perfectly. In this paper, a bio-inspired modular based design for Pneu-Net actuator is developed. The actuator mimics the elephant trunk curling to be employed for rehabilitation of human hand fingers. The actuator is an integrated four Pneu-Net modules actuator which is attached to hand's finger. The main introduced advantages in the new developed actuator are: providing four degrees of freedom (DoF) essential for finger's motion by single compound actuator and developing a methodology for a modular soft Pneu-Net actuator that is efficiently reproducible. The actuator's design is developed using computer aided design (CAD) software SOLIDWORKS. The design is simulated using finite element modeling (FEM) software ABAQUS. Fabrication process uses 3D printed molds. Soft material is molded in the 3D printed molds, forming actuator's modules. Actuator's modules are integrated by adhesion using the soft material. A proposed non-standard hyper-elastic material biaxial tension test is introduced as a quick material properties identification method that can produce a test table used for material identification in the FEM. Enhanced version for the actuator uses reinforcement fibers. Results show advances for the reinforced actuator, as it limits the unwanted actuator's strain and deformation. The reinforced actuator shows improved energy efficiency reaches to 46%., (© 2024. The Author(s).)

For decades, the field of biologically inspired robotics has leveraged insights from animal locomotion to improve the walking ability of legged robots. Recently, 'biomimetic' robots have been developed to model how specific animals walk. By prioritizing biological accuracy to the target organism rather than the application of general principles from biology, these robots can be used to develop detailed biological hypotheses for animal experiments, ultimately improving our understanding of the biological control of legs while improving technical solutions. In this work, we report the development and validation of the robot Drosophibot II, a meso-scale robotic model of an adult fruit fly, Drosophila melanogaster . This robot is novel for its close attention to the kinematics and dynamics of Drosophila , an increasingly important model of legged locomotion. Each leg's proportions and degrees of freedom have been modeled after Drosophila 3D pose estimation data. We developed a program to automatically solve the inverse kinematics necessary for walking and solve the inverse dynamics necessary for mechatronic design. By applying this solver to a fly-scale body structure, we demonstrate that the robot's dynamics fit those modeled for the fly. We validate the robot's ability to walk forward and backward via open-loop straight line walking with biologically inspired foot trajectories. This robot will be used to test biologically inspired walking controllers informed by the morphology and dynamics of the insect nervous system, which will increase our understanding of how the nervous system controls legged locomotion., (Creative Commons Attribution license.)

Soft underwater swimming robots actuated by smart materials have unique advantages in exploring the ocean, such as low noise, high flexibility, and friendly environment interaction ability. However, most of them typically exhibit limited swimming speed and flexibility due to the inherent characteristics of soft actuation materials. The actuation method and structural design of soft robots are key elements to improve their motion performance. Inspired by the muscle actuation and swimming mechanism of natural fish, a fast-swimming soft robotic fish actuated by a bionic muscle actuator made of dielectric elastomer is presented. The results show that by controlling the two independent actuating units of a biomimetic actuator, the robotic fish can not only achieve continuous C-shaped body motion similar to natural fish but also have a large bending angle (maximum unidirectional angle is about 40°) and thrust force (peak thrust is about 14 mN). In addition, the coupling relationship between the swimming speed and actuating parameters of the robotic fish is established through experiments and theoretical analysis. By optimizing the control strategy, the robotic fish can demonstrate a fast swimming speed of 76 mm/s (0.76 body length/s), which is much faster than most of the reported soft robotic fish driven by nonbiological soft materials that swim in body and/or caudal fin propulsion mode. What's more, by applying programmed voltage excitation to the actuating units of the bionic muscle, the robotic fish can be steered along specific trajectories, such as continuous turning motions and an S-shaped routine. This study is beneficial for promoting the design and development of high-performance soft underwater robots, and the adopted biomimetic mechanisms, as well as actuating methods, can be extended to other various flexible devices and soft robots.

The circulatory and respiratory systems in humans are marvels of biological engineering that exhibit competence in maintaining homeostasis. These systems not only shield the organism from external contaminants but also orchestrate the vital gases via the bloodstream to sustain cellular respiration and metabolic processes across diverse tissues. It is noticed that spaces inhabited encounter challenges akin to those of the human body: protecting the indoor air from external pollutants while removing anthropogenic byproducts like carbon dioxide (CO 2 ), particulate matters (PM), and volatile organic compounds (VOCs) tooutside. A biomimetic approach, composed of a microbubble-based gas exchanger and circulating liquid inspired by alveoli, capillary beds, and bloodstream of the human circulatory/respiratory system, offer an innovative solution for comprehensive air purification of hermetic spaces. Circulatory/respiratory-inspired air purification system (CAPS) ensure both continuous removal of PM and exchange of gas species between indoor and outdoor environments to maintain homeostasis. The effectiveness of this system is also supported by animal behavior experiments with and without CAPS, showing an effect of reducing CO 2 concentration by 30% and increasing mice locomotor activity by 53%. CAPS is expected to evolve into robust and comprehensive air purification schemes through the networked integration of plural internal and external environments., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

Mechanoreceptors in animals and plants play a crucial role in sensing mechanical stimuli such as touch, motion, stretch, and vibration. Learning from the mechanisms of mechanoreceptors may facilitate the development of bionic tactile sensors, leading to higher sensitivity, spatial resolution, and dynamic ranges. However, very little literature has comprehensively discussed the relevance of biological tactile sensing systems and machine-learning-based bionic tactile sensors. This review first introduces the structural features, signal acquisition and transmission mechanisms, and feedback processes of both plant and animal mechanoreceptors, and then summarizes the efforts to develop bionic tactile sensors by mimicking the morphologies and structures of mechanoreceptors in plants and animals. Additionally, the integration of artificial intelligence approaches with these sensors for data processing and analysis are demonstrated, followed by the perspectives on current challenges and future trends in bionic tactile sensors. This review addresses the challenges in developing high-performance tactile sensors by focusing on surface microstructures and biological mechanoreceptors, serving as a valuable reference for developing bionic tactile sensors with enhanced sensitivity and multimodal sensing capabilities. Furthermore, it may benefit the future development of smart sensing systems integrated with artificial intelligence for more precise object and texture recognition., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Innovations in control mechanisms for muscle-powered robots are advancing the sophistication of biohybrid machines.

A butterfly-like robot swims using an electronic device to stimulate human-derived motor neurons and cardiac muscle cells.

A remarkable variety of organisms use metachronal coordination (i.e. numerous neighboring appendages beating sequentially with a fixed phase lag) to swim or pump fluid. This coordination strategy is used by microorganisms to break symmetry at small scales where viscous effects dominate and flow is time-reversible. Some larger organisms use this swimming strategy at intermediate scales, where viscosity and inertia both play important roles. However, the role of individual propulsor kinematics-especially across hydrodynamic scales-is not well-understood, though the details of propulsor motion can be crucial for the efficient generation of flow. To investigate this behavior, we developed a new soft robotic platform using magnetoactive silicone elastomers to mimic the metachronally coordinated propulsors found in swimming organisms. Furthermore, we present a method to passively encode spatially asymmetric beating patterns in our artificial propulsors. We investigated the kinematics and hydrodynamics of three propulsor types, with varying degrees of asymmetry, using Particle Image Velocimetry and high-speed videography. We find that asymmetric beating patterns can move considerably more fluid relative to symmetric beating at the same frequency and phase lag, and that asymmetry can be passively encoded into propulsors via the interplay between elastic and magnetic torques. Our results demonstrate that nuanced differences in propulsor kinematics can substantially impact fluid pumping performance. Our soft robotic platform also provides an avenue to explore metachronal coordination at the meso-scale, which in turn can inform the design of future bioinspired pumping devices and swimming robots., (Creative Commons Attribution license.)

Autonomous ocean-exploring vehicles have begun to take advantage of onboard sensor measurements of water properties such as salinity and temperature to locate oceanic features in real time. Such targeted sampling strategies enable more rapid study of ocean environments by actively steering towards areas of high scientific value. Inspired by the ability of aquatic animals to navigate via flow sensing, this work investigates hydrodynamic cues for accomplishing targeted sampling using a palm-sized robotic swimmer. As proof-of-concept analogy for tracking hydrothermal vent plumes in the ocean, the robot is tasked with locating the center of turbulent jet flows in a 13,000-liter water tank using data from onboard pressure sensors. To learn a navigation strategy, we first implemented RL on a simulated version of the robot navigating in proximity to turbulent jets. After training, the RL algorithm discovered an effective strategy for locating the jets by following transverse velocity gradients sensed by pressure sensors located on opposite sides of the robot. When implemented on the physical robot, this gradient following strategy enabled the robot to successfully locate the turbulent plumes at more than twice the rate of random searching. Additionally, we found that navigation performance improved as the distance between the pressure sensors increased, which can inform the design of distributed flow sensors in ocean robots. Our results demonstrate the effectiveness and limits of flow-based navigation for autonomously locating hydrodynamic features of interest., (Creative Commons Attribution license.)

The hard suckers commonly used in surgical operations often cause adsorption extrusion damage to the biological tissue. To tackle this problem, from the perspective of bionics, through in-depth observation and research on the special sucker adsorption process and adsorption mechanism of hypostomus plecostomus (HP), this paper proposes a bionic soft hypostomus plecostomus sucker (BSHPS) with a variable stiffness gradient structure with a good adsorption performance on soft moist irregular biological tissues. The BSHPS comprises a lip disc, a pre-valvular cavity, and a post-valvular cavity. Through the volume changes of the pre- and post-valvular cavities, a pressure difference is generated between the inside and outside of the sucker, enabling the lip disc to remain sealed. The experiments were carried out by an automatic tensile force measurement system equipped with a vacuum pump, and the results showed that in slippery environment, the adsorption performance of the BSHPS is improved by a maximum of 61.9% compared to that in dry environment. On a biological tissue surface, the adsorption force is as high as 13.7765 N. The most important advantage of the proposed BSHPS is that it can be firmly adsorbed the surface of soft moist irregular biological tissues, effectively slowing down or avoiding adsorption extrusion damage to the biological tissue. Therefore, the BSHPS is expected to have good application prospects in modern surgical medicine., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Micro-sensors, such as pressure and flow sensors, are usually adopted to attain actual fluid information around swimming biomimetic robotic fish for hydrodynamic analysis and control. However, most of the reported micro-sensors are mounted discretely on body surfaces of robotic fish and it is impossible to analyzed the hydrodynamics between the caudal fin and the fluid. In this work, a biomimetic caudal fin integrated with a resistive pressure sensor is designed and fabricated by laser machined conductive carbon fibre composites. To analyze the pressure exerted on the caudal fin during underwater oscillation, the pressure on the caudal fin is measured under different oscillating frequencies and angles. Then a model developed from Bernoulli equation indicates that the maximum pressure difference is linear to the quadratic power of the oscillating frequency and the maximum oscillating angle. The fluid disturbance generated by caudal fin oscillating increases with an increase of oscillating frequency, resulting in the decrease of the efficiency of converting the kinetic energy of the caudal fin oscillation into the pressure difference on both sides of the caudal fin. However, perhaps due to the longer stability time of the disturbed fluid, this conversion efficiency increases with the increase of the maximum oscillating angle. Additionally, the pressure variation of the caudal fin oscillating with continuous different oscillating angles is also demonstrated to be detected effectively. It is suggested that the caudal fin integrated with the pressure sensor could be used for sensing the in situ flow field in real time and analyzing the hydrodynamics of biomimetic robotic fish., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

The emulation of tactile sensory nerves to achieve advanced sensory functions in robotics with artificial intelligence is of great interest. However, such devices remain bulky and lack reliable competence to functionalize further synaptic devices with proprioceptive feedback. Here, we report an artificial organic afferent nerve with low operating bias (-0.6 V) achieved by integrating a pressure-activated organic electrochemical synaptic transistor and artificial mechanoreceptors. The dendritic integration function for neurorobotics is achieved to perceive directional movement of object, further reducing the control complexity by exploiting the distributed and parallel networks. An intelligent robot assembled with artificial afferent nerve, coupled with a closed-loop feedback program is demonstrated to rapidly implement slip recognition and prevention actions upon occurrence of object slippage. The spatiotemporal features of tactile patterns are well differentiated with a high recognition accuracy after processing spike-encoded signals with deep learning model. This work represents a breakthrough in mimicking synaptic behaviors, which is essential for next-generation intelligent neurorobotics and low-power biomimetic electronics., (© 2024. The Author(s).)

Artificial neuromorphic devices can emulate dendric integration, axonal parallel transmission, along with superior energy efficiency in facilitating efficient information processing, offering enormous potential for wearable electronics. However, integrating such circuits into textiles to achieve biomimetic information perception, processing, and control motion feedback remains a formidable challenge. Here, we engineer a quasi-solid-state iontronic synapse fiber (ISF) comprising photoresponsive TiO 2 , ion storage Co-MoS 2 , and an ion transport layer. The resulting ISF achieves inherent short-term synaptic plasticity, femtojoule-range energy consumption, and the ability to transduce chemical/optical signals. Multiple ISFs are interwoven into a synthetic neural fabric, allowing the simultaneous propagation of distinct optical signals for transmitting parallel information. Importantly, IFSs with multiple input electrodes exhibit spatiotemporal information integration. As a proof of concept, a textile-based multiplexing neuromorphic sensorimotor system is constructed to connect synaptic fibers with artificial fiber muscles, enabling preneuronal sensing information integration, parallel transmission, and postneuronal information output to control the coordinated motor of fiber muscles. The proposed fiber system holds enormous promise in wearable electronics, soft robotics, and biomedical engineering., Competing Interests: Competing interests statement:The authors declare no competing interest.

Legged robots have received widespread attention in academia and engineering owing to their excellent terrain adaptability. However, most legged robots can only adapt to high-hardness environments instead of flexible environments. Expanding the motion range of legged robots to water is a promising but challenging work. Inspired by basilisk lizards which can run on water surfaces by feet, this paper proposes a bipedal robot for water running by hydrodynamics instead of buoyancy. According to the motion parameters of the basilisk lizard during water running, a single-degree of freedom bipedal mechanism is proposed to reproduce the motion trajectory of the feet of the basilisk lizard. Scale optimization is conducted by a particle swarm optimization algorithm to determine the geometrical parameters of the mechanism. The effects of motion frequency and foot area on mechanism performance are studied and the optimal solutions are determined by the maximum single-cycle lift impulse through numerical calculations. A bipedal water running robot prototype was fabricated, and the experimental results show that the prototype can generate enough support for the robot running on the water by providing a maximum lift of 2.4 times its weight (160 g) and reaching a horizontal forward speed range of 0.3-0.8 m s -1 , compared with the basilisk lizard weighs 2-200 g, generates a lift impulse that is 111%-225% of its body weight, and moves at a speed of 1.3 ± 0.1 m s -1 ., (© 2024 IOP Publishing Ltd.)

Sense digitalization, the process of transforming sensory experiences into digital data, is an emerging research frontier that links the physical world with human perception and interaction. Inspired by the adaptability, fault tolerance, robustness, and energy efficiency of biological senses, this field drives the development of numerous innovative digitalization techniques. Neuromorphic bioelectronics, characterized by biomimetic adaptability, stand out for their seamless bidirectional interactions with biological entities through stimulus-response and feedback loops, incorporating bio-neuromorphic intelligence for information exchange. This review illustrates recent progress in sensory digitalization, encompassing not only the digital representation of physical sensations such as touch, light, and temperature, correlating to tactile, visual, and thermal perceptions, but also the detection of biochemical stimuli such as gases, ions, and neurotransmitters, mirroring olfactory, gustatory, and neural processes. It thoroughly examines the material design, device manufacturing, and system integration, offering detailed insights. However, the field faces significant challenges, including the development of new device/system paradigms, forging genuine connections with biological systems, ensuring compatibility with the semiconductor industry and overcoming the absence of standardization. Future ambition includes realization of biocompatible neural prosthetics, exoskeletons, soft humanoid robots, and cybernetic devices that integrate smoothly with both biological tissues and artificial components., (© 2024 Wiley‐VCH GmbH.)

Soft gastric simulators are in vitro biomimetic modules that can reproduce the antral contraction waves (ACWs). Along with providing information concerning stomach contents, stomach simulators enable experts to evaluate the digestion process of foods and drugs. Traditionally, open-loop control approaches were implemented on stomach simulators to produce ACWs. Constructing a closed-loop control system is essential to improve the simulator's ability to imitate ACWs in additional scenarios and avoid constant tuning. Closed-loop control can enhance stomach simulators in accuracy, responding to various food and drug contents, timing, and unknown disturbances. In this article, a new generation of anatomically realistic soft pneumatic gastric simulators is designed and fabricated. The presented simulator represents the antrum, the lower portion of the stomach where ACWs occur. It is equipped with a real-time feedback system to implement diverse closed-loop controllers on demand. All the details of the physical design, fabrication, and assembly process are discussed. Also, the measures taken for the mechatronics design and sensory system are highlighted in this article. Through several implementation algorithms and techniques, three closed-loop controllers, including model-based and model-free schemes are designed and successfully applied on the presented simulator to imitate ACWs. All the experimental outcomes are carefully analyzed and compared against the biological counterparts. It is demonstrated that the presented simulator can serve as a reliable tool and method to scrutinize digestion and promote novel technologies around the human stomach and the digestion process. This research methodology can also be utilized to develop other biomimetic and bioinspired applications.

Biomimetic neuromorphic sensing systems, inspired by the structure and function of biological neural networks, represent a major advancement in the field of sensing technology and artificial intelligence. This review paper focuses on the development and application of electrolyte gated transistors (EGTs) as the core components (synapses and neuros) of these neuromorphic systems. EGTs offer unique advantages, including low operating voltage, high transconductance, and biocompatibility, making them ideal for integrating with sensors, interfacing with biological tissues, and mimicking neural processes. Major advances in the use of EGTs for neuromorphic sensory applications such as tactile sensors, visual neuromorphic systems, chemical neuromorphic systems, and multimode neuromorphic systems are carefully discussed. Furthermore, the challenges and future directions of the field are explored, highlighting the potential of EGT-based biomimetic systems to revolutionize neuromorphic prosthetics, robotics, and human-machine interfaces. Through a comprehensive analysis of the latest research, this review is intended to provide a detailed understanding of the current status and future prospects of biomimetic neuromorphic sensory systems via EGT sensing and integrated technologies.

Tactile sensors play an important role when robots perform contact tasks, such as physical information collection, force or displacement control to avoid collision. For these manipulations, excessive contact may cause damage while poor contact cause information loss between the robotic end-effector and the objects. Inspired by skin structure and signal transmission method, this paper proposes a tactile sensing system based on the self-sensing soft pneumatic actuator (S-SPA) capable of providing tactile sensing capability for robots. Based on the adjustable height and compliance characteristics of the S-SPA, the contact process is safe and more tactile information can be collected. And to demonstrate the feasibility and advantage of this system, a robotic hand with S-SPAs could recognize different textures and stiffness of the objects by touching and pinching behaviours to collect physical information of the various objects under the positive work states of the S-SPA. The result shows the recognition accuracy of the fifteen texture plates reaches 99.4%, and the recognition accuracy of the four stiffness cuboids reaches 100%by training a KNN model. This safe and simple tactile sensing system with high recognition accuracies based on S-SPA shows great potential in robotic manipulations and is beneficial to applications in domestic and industrial fields., (© 2024 IOP Publishing Ltd.)

Gravitational forces can induce deviations in body posture from desired configurations in multi-legged arboreal robot locomotion with low leg stiffness, affecting the contact angle between the swing leg's end-effector and the climbing surface during the gait cycle. The relationship between desired and actual foot positions is investigated here in a leg-stiffness-enhanced model under external forces, focusing on the challenge of unreliable end-effector attachment on climbing surfaces in such robots. Inspired by the difference in ceiling attachment postures of dead and living geckos, feedforward compensation of the stance phase legs is the key to solving this problem. A feedforward gravity compensation (FGC) strategy, complemented by leg coordination, is proposed to correct gravity-influenced body posture and improve adhesion stability by reducing body inclination. The efficacy of this strategy is validated using a quadrupedal climbing robot, EF-I, as the experimental platform. Experimental validation on an inverted surface (ceiling walking) highlights the benefits of the FGC strategy, demonstrating its role in enhancing stability and ensuring reliable end-effector attachment without external assistance. In the experiment, robots without FGC only completed 3 out of 10 trials, while robots with FGC achieved a 100% success rate in the same trials. The speed was substantially greater with FGC, achieving 9.2 mm s -1 in the trot gait. This underscores the proposed potential of the FGC strategy in overcoming the challenges associated with inconsistent end-effector attachment in robots with low leg stiffness, thereby facilitating stable locomotion even at an inverted body attitude., (Creative Commons Attribution license.)

This paper introduces a method for measuring wing motion, deformation, and inertial forces in bio-inspired aircraft research using a camera motion capture system. The method involves placing markers on the wing surface and fitting rigid planes to determine the wing's spatial axis. This allows for describing the wing's rigid motion and obtaining deformation characteristics, such as deflection, twist angle, and gap distance of the forewing and hindwing. An image-based method is proposed for determining wing mass distribution, mass blocks, and mass points for inertial force measurement. The study addresses wing motion, deformation, and inertial force measurement in a real butterfly-like flapping wing vehicle and demonstrates the effectiveness of the approach. The results reveal that inertial forces play a negligible role in the generation of lift peaks and contribute minimal lift during the entire flapping cycle. Furthermore, a transitional phase between downstroke and upstroke is found in flexible wing motion, which has high lift production. This measurement approach offers a rapid and effective solution to experimental challenges in bio-inspired aircraft design and optimization., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Neuromorphic nanoelectronic devices that can emulate the temperature-sensitive dynamics of biological neurons are of great interest for bioinspired robotics and advanced applications such as in silico neuroscience. In this work, we demonstrate the biomimetic thermosensitive properties of two-terminal V 3 O 5 memristive devices and showcase their similarity to the firing characteristics of thermosensitive biological neurons. The temperature-dependent electrical characteristics of V 3 O 5 -based memristors are used to understand the spiking response of a simple relaxation oscillator. The temperature-dependent dynamics of these oscillators are then compared with those of biological neurons through numerical simulations of a conductance-based neuron model, the Morris-Lecar neuron model. Finally, we demonstrate a robust neuromorphic thermosensation system inspired by biological thermoreceptors for bioinspired thermal perception and representation. These results not only demonstrate the biorealistic emulative potential of threshold-switching memristors but also establish V 3 O 5 as a functional material for realizing solid-state neurons for neuromorphic computing and sensing applications.

Drawing inspiration from cohesive integration of skeletal muscles and sensory skins in vertebrate animals, we present a design strategy of soft robots, primarily consisting of an electronic skin (e-skin) and an artificial muscle. These robots integrate multifunctional sensing and on-demand actuation into a biocompatible platform using an in-situ solution-based method. They feature biomimetic designs that enable adaptive motions and stress-free contact with tissues, supported by a battery-free wireless module for untethered operation. Demonstrations range from a robotic cuff for detecting blood pressure, to a robotic gripper for tracking bladder volume, an ingestible robot for pH sensing and on-site drug delivery, and a robotic patch for quantifying cardiac function and delivering electrotherapy, highlighting the application versatilities and potentials of the bio-inspired soft robots. Our designs establish a universal strategy with a broad range of sensing and responsive materials, to form integrated soft robots for medical technology and beyond., (© 2024. The Author(s).)

Traditional robots are characterized by rigid structures, which restrict their range of motion and their application in environments where complex movements and safe human-robot interactions are required. Soft robots inspired by nature and characterized by soft compliant materials have emerged as an exciting alternative in unstructured environments. However, the use of multicomponent actuators with low power/weight ratios has prevented the development of truly bioinspired soft robots. Octopodes' limbs contain layers of muscular hydrostats, which provide them with a nearly limitless range of motions. In this work, we propose octopus-inspired muscular hydrostats powered by an emerging class of artificial muscles called twisted and coiled artificial muscles (TCAMs). TCAMs are fabricated by twisting and coiling inexpensive fibers, can sustain stresses up to 60 MPa, and provide tensile strokes of nearly 50% with <0.2 V/cm of input voltage. These artificial muscles overcome the limitations of other actuators in terms of cost, power, and portability. We developed four different configurations of muscular hydrostats with TCAMs arranged in different orientations to reproduce the main motions of octopodes' arms: shortening, torsion, bending, and extension. We also assembled an untethered waterproof device with on-board control, sensing, actuation, and a power source for driving our hydrostats underwater. The proposed TCAM-powered muscular hydrostats will pave the way for the development of compliant bioinspired robots that can be used to explore the underwater world and perform complex tasks in harsh and dangerous environments.

The bending stiffness modulation mechanism for soft grippers has gained considerable attention to improve grasping versatility, capacity, and stability. However, lateral stability is usually ignored or hard to achieve at the same time with good bending stiffness modulation performance. Therefore, this article presents a bioinspired bidirectional stiffening soft actuator (BISA), enabling compliant and stable performance. BISA combines the air tendon actuation (ATA) and a bone-like structure (BLS). The ATA is the main actuation of the BISA, and the bending stiffness can be modulated with a maximum stiffness of about 0.7 N/mm and a maximum magnification of three times when the bending angle is 45°. Inspired by the morphological structure of the phalanx, the lateral stiffness can be modulated by changing the pulling force of the BLS. The actuator with BLSs can improve the lateral stiffness by about 3.9 times compared to the one without BLSs. The maximum lateral stiffness can reach 0.46 N/mm. And the lateral stiffness can be modulated by decoupling about 1.3 times (e.g., from 0.35 to 0.46 N/mm when the bending angle is 45°). The test results show that the influence of the rigid structures on bending is small with about 1.5 mm maximum position errors of the distal point of the actuator in different pulling forces. The advantages brought by the proposed method enable versatile four-finger grasping. The performance of this gripper is characterized and demonstrated on multiscale, multiweight, and multimodal grasping tasks.

Environmental wind is a random phenomenon in both speed and direction, though it can be forecasted to some extent. An example of that is a gust which is an abrupt, but short-time change in wind speed and direction. Being a free and clean source for small-scale energy scavenging, attraction of wind is rapidly growing in the world of energy harvesters. In this paper, a leaf-like flapping wind energy harvester is introduced as the base structure in which a short-span airfoil is attached to the free end of a double-deck cantilever beam. A flap mechanism inspired by scales on sharks' skin and a tail mechanism inspired by birds' horizontal tail are proposed for integration to the base harvester to make it adaptive with respect to wind speed and direction, respectively. The use of the flap mechanism increases the leaf flapping frequency by +2.1 to +11.5 Hz at wind speeds of 1.5 to 6.0 m s -1 . Therefore, since the output power of a vibrational harvester is a function of vibration frequency, a figure of merit or an efficiency parameter related to the output power will increase, as well. On the other hand, if there is a misalignment between the harvester's heading and wind direction due to change of the latter one, the harvesting performance deteriorates. Although the base harvester can realign in certain ranges of sideslip angle at each wind speed, when the tail mechanism is integrated into that, it broadens the range of realignable sideslip angles at all the investigated wind speeds by up to 80∘., (Creative Commons Attribution license.)

Avian eyes have deep central foveae as a result of extensive evolution. Deep foveae efficiently refract incident light, creating a magnified image of the target object and making it easier to track object motion. These features are essential for detecting and tracking remote objects in dynamic environments. Furthermore, avian eyes respond to a wide spectrum of light, including visible and ultraviolet light, allowing them to efficiently distinguish the target object from complex backgrounds. Despite notable advances in artificial vision systems that mimic animal vision, the exceptional object detection and targeting capabilities of avian eyes via foveated and multispectral imaging remain underexplored. Here, we present an artificial vision system that capitalizes on these aspects of avian vision. We introduce an artificial fovea and vertically stacked perovskite photodetector arrays whose designs were optimized by theoretical simulations for the demonstration of foveated and multispectral imaging. The artificial vision system successfully identifies colored and mixed-color objects and detects remote objects through foveated imaging. The potential for use in uncrewed aerial vehicles that need to detect, track, and recognize distant targets in dynamic environments is also discussed. Our avian eye-inspired perovskite artificial vision system marks a notable advance in bioinspired artificial visions.

Bioinspiration from avian eyes allows development of artificial vision systems with foveated and multispectral imaging.

Neuromorphic vision sensors or event cameras have made the visual perception of extremely low reaction time possible, opening new avenues for high-dynamic robotics applications. These event cameras' output is dependent on both motion and texture. However, the event camera fails to capture object edges that are parallel to the camera motion. This is a problem intrinsic to the sensor and therefore challenging to solve algorithmically. Human vision deals with perceptual fading using the active mechanism of small involuntary eye movements, the most prominent ones called microsaccades. By moving the eyes constantly and slightly during fixation, microsaccades can substantially maintain texture stability and persistence. Inspired by microsaccades, we designed an event-based perception system capable of simultaneously maintaining low reaction time and stable texture. In this design, a rotating wedge prism was mounted in front of the aperture of an event camera to redirect light and trigger events. The geometrical optics of the rotating wedge prism allows for algorithmic compensation of the additional rotational motion, resulting in a stable texture appearance and high informational output independent of external motion. The hardware device and software solution are integrated into a system, which we call artificial microsaccade-enhanced event camera (AMI-EV). Benchmark comparisons validated the superior data quality of AMI-EV recordings in scenarios where both standard cameras and event cameras fail to deliver. Various real-world experiments demonstrated the potential of the system to facilitate robotics perception both for low-level and high-level vision tasks.

Inspired by the vibrations of aquatic plants such as seaweed in the unsteady flow fields generated by free-surface waves, we investigate a novel device based on piezoelectric plates to harvest energy from oscillatory cross flows. Towards this end, numerical studies are conducted using a flow-structure-electric interaction model to understand the underlying physical mechanisms involved in the dynamics and energy harvesting performance of one or a pair of piezoelectric plates in an oscillatory cross flow. In a single-plate configuration, both periodic and irregular responses have been observed depending on parameters such as normalized plate stiffness and Keulegan-Carpenter number. Large power harvesting is achieved with the excitation of natural modes. Besides, when the time scale of the motion and the intrinsic time scale of the circuit are close to each other the power extraction is enhanced. In a two-plate configuration with tandem formation, the hydrodynamic interaction between the two plates can induce irregularity in the response. In terms of energy harvesting, two counteracting mechanisms have been identified, shielding and energy recovery. The shielding effect reduces plate motion and energy harvesting, whereas with the energy recovery effect one plate is able to recovery energy from the wake of another for performance enhancement. The competition between these mechanisms leads to constructive or destructive interactions between the two plates. These results suggest that for better performance the system should be excited at its natural period, which should be close to the intrinsic time scale of the circuit. Moreover, using a pair of plates in a tandem formation can further improve the energy harvesting capacity when conditions for constructive interaction are satisfied., (© 2024 IOP Publishing Ltd.)

Soft-bodied animals, such as worms and snakes, use many muscles in different ways to traverse unstructured environments and inspire tools for accessing confined spaces. They demonstrate versatility of locomotion which is essential for adaptation to changing terrain conditions. However, replicating such versatility in untethered soft-bodied robots with multimodal locomotion capabilities have been challenging due to complex fabrication processes and limitations of soft body structures to accommodate hardware such as actuators, batteries and circuit boards. Here, we present MetaCrawler, a 3D printed metamaterial soft robot designed for multimodal and omnidirectional locomotion. Our design approach facilitated an easy fabrication process through a discrete assembly of a modular nodal honeycomb lattice with soft and hard components. A crucial benefit of the nodal honeycomb architecture is the ability of its hard components, nodes, to accommodate a distributed actuation system, comprising servomotors, control circuits, and batteries. Enabled by this distributed actuation, MetaCrawler achieves five locomotion modes: peristalsis, sidewinding, sideways translation, turn-in-place, and anguilliform. Demonstrations showcase MetaCrawler's adaptability in confined channel navigation, vertical traversing, and maze exploration. This soft robotic system holds the potential to offer easy-to-fabricate and accessible solutions for multimodal locomotion in applications such as search and rescue, pipeline inspection, and space missions., (Creative Commons Attribution license.)

The human toe, characterized by its rigid-flexible structure comprising hard bones and flexible joints, facilitates adaptive and stable movement across varied terrains. In this paper, we utilized a motion capture system to study the adaptive adjustments of toe joints when encountering obstacles. Inspired by the mechanics of toe joints, we proposed a novel design method for a rigid-flexible coupled wheel. The wheel comprises multiple elements: a rigid skeleton, supporting toes, connecting shafts, torsion springs, soft tendons, and damping pads. The torsion springs connect the rigid frame to the supporting toes, enabling them to adapt to uneven terrains and pipes with different diameters. The design was validated through kinematic and dynamic modeling, rigid-flexible coupled dynamics simulation, and stress analysis. Different stiffness coefficients of torsion springs were compared for optimal wheel design. Then, the wheel was applied to a sewer robot, and its performance was evaluated and compared with a pneumatic rubber tire in various experiments, including movement on flat surfaces, overcoming small obstacles, adaptability tests in different terrains, and active driving force tests in dry and wet pipelines. The results prove that the designed wheel showed better stability and anti-slip properties than conventional tires, making it suitable for diverse applications such as pipeline robots, desert vehicles, and lunar rovers., (© 2024 IOP Publishing Ltd.)