Search

Using the van der Waals density functional theory, we studied the binding peculiarities of favipiravir (FP) and ebselen (EB) molecules on a monolayer of black phosphorene (BP). We systematically examined the interaction characteristics and thermodynamic properties in a vacuum and a continuum, solvent interface for active drug therapy. These results illustrate that the hybrid molecules are enabled functionalized two-dimensional (2D) complex systems with a vigorous thermostability. We demonstrate in this study that these molecules remain flat on the monolayer BP system and phosphorus atoms are intact. It is inferred that the hybrid FP+EB molecules show larger adsorption energy due to the van der Waals forces and planar electrostatic interactions. The changes in Gibbs free energy at different surface charge fluctuations and temperatures imply that the FP and EB are allowed to adsorb from the gas phase onto the 2D film at high temperatures. Thereby, the results unveiled beneficial inhibitor molecules on two dimensional BP nanocarriers, potentially introducing a modern strategy to enhance the development of advanced materials, biotechnology, and nanomedicine. [ABSTRACT FROM AUTHOR]

Availability of computing will be strongly limited by global energy production in 1–2 decades. Computing consumes 4–5% of global electricity supply and continues to increase. This is underpinned by memory and switching devices encountering leakage as they are downscaled. Two‑dimensional (2D) materials offer a potential solution to the fundamental problem owing to carrier confinement which significantly reduces scattering events. Herein, a mixed ionic‑electronic transport is used in layered black phosphorus (BP) based vertically stacked resistance change memories. The memory device relies on a unique interplay between the oxygen and silver ion diffusion through the stack which is generated using a combination of bottom (electrochemically active silver) and top (indium tin oxide) electrodes. The use of a transparent top‐electrode enabled for the first time to conduct spectroscopic characterization of the device and experimentally reveal fundamental mechanisms. Endurance of the devices are observed to be >104 switching cycles, with ON/OFF current ratio of >107 and standby power consumption of <5 fW, which effectively suppresses leakage current and sneak paths in a memory array. By undertaking detailed microscopic and spectroscopic investigations, supported by theoretical calculations, this work opens opportunities to enhance resistive switching performances of 2D materials for next‑generation information storage and brain‑inspired computation. [ABSTRACT FROM AUTHOR]

Using the van der Waals density functional theory, we studied the binding peculiarities of favipiravir (FP) and ebselen (EB) molecules on a monolayer of black phosphorene (BP). We systematically examined the interaction characteristics and thermodynamic properties in a vacuum and a continuum, solvent interface for active drug therapy. These results illustrate that the hybrid molecules are enabled functionalized two-dimensional (2D) complex systems with a vigorous thermostability. We demonstrate in this study that these molecules remain flat on the monolayer BP system and phosphorus atoms are intact. It is inferred that the hybrid FP+EB molecules show larger adsorption energy due to the van der Waals forces and planar electrostatic interactions. The changes in Gibbs free energy at different surface charge fluctuations and temperatures imply that the FP and EB are allowed to adsorb from the gas phase onto the 2D film at high temperatures. Thereby, the results unveiled beneficial inhibitor molecules on two dimensional BP nanocarriers, potentially introducing a modern strategy to enhance the development of advanced materials, biotechnology, and nanomedicine.

We demonstrate an erbium-doped fiber laser passively Q-switched by a black-phosphorus polyimide film. The multi-layer black-phosphorus (BP) nanosheets were prepared via a liquid exfoliation approach exploiting N-methylpyrrolidone as the dispersion liquid. By mixing the BP nanosheets with polyimide (PI), a piece of BP-PI film was obtained after evaporating the mixture in a petri dish. The BP-PI saturable absorber had a modulation depth of 0.47% and was inserted into an erbium-doped fiber laser to realize passive Q-switched operations. The repetition rate of the Q-switched laser increased from 5.73 kHz to 31.07 kHz when the laser pump was enhanced from 31.78 mW to 231.46 mW. Our results show that PI is an excellent host material to protect BP from oxidation, and the BP-PI film can act as a promising nonlinear optical device for laser applications. [ABSTRACT FROM AUTHOR]

A detailed experimental investigation of dopants modified black-phosphorus and methodology to deposit film on glass substrate have been conducted in order to improve the optical properties and wider utility. It was observed that Raman peaks were less intense for film, compared to separately grown black-P crystals. It was also observed that when synthesis duration was reduced to four hours, all Raman peaks became broader. A non-uniform material luminescence with dominance of green luminescence was observed when black-P crystals were irradiated with light of wavelength ~565–575 nm. The sulfur doped black-P illustrated fascinating rod-and-globule like deposits on the parent nano-coral black phosphorous substrate, whereas selenium doped black-P exhibits a localized concentration of Se in the near homogeneous phosphorous coverage. The boron and sulfur doping increased the band gap. In contrast, Se, In, and Ga doping resulted in a significant decrease in band gap energy. Frequency dependent dielectric functions of the anisotropic zig-zag and armchair edges of phosphorene suggest that doping of black –P causes a diminution in the first peak position for the zigzag electric field polarization demonstrating a gradual red shift. The red shift in the first peak position was perceived to be greatest for doping with boron exhibiting a band edge at 0.65 eV and least in the case of doping with sulfur, resulting in a band edge at 1.09 eV. [ABSTRACT FROM AUTHOR]

We propose far-infrared photodetectors with the graphene nanoribbon (GNR) array as the photosensitive element and the black phosphorus (bP) base layer (BL). The operation of these GNR infrared photodetectors (GNR-IPs) is associated with the interband photogeneration of the electron–hole pairs in the GNR array followed by the tunneling injection of either electrons or holes into a wide gap bP BL. The GNR-IP operating principle is akin to that of the unitraveling-carrier photodiodes based on the standard semiconductors. Due to a narrow energy gap in the GNRs, the proposed GNR-IPs can operate in the far-, mid-, and near-infrared spectral ranges. The cut-off photon energy, which is specified by the GNR energy gap (i.e., is dictated by the GNR width), can be in the far-infrared range, being smaller that the energy gap of the bP BL of ΔG ≃ 300 meV. Using the developed device models of the GNR-IPs and the GNR-IP terahertz photomixers, we evaluate their characteristics and predict their potential performance. The speed of the GNR-IP response is determined by rather short times: the photocarrier try-to-escape time and the photocarrier transit time across the BL. Therefore, the GNR-IPs could operate as terahertz photomixers. The excitation of the plasma oscillations in the GNR array might result in a strong resonant photomixing. [ABSTRACT FROM AUTHOR]

We demonstrate an erbium-doped fiber laser passively Q-switched by a black-phosphorus polyimide film. The multi-layer black-phosphorus (BP) nanosheets were prepared via a liquid exfoliation approach exploiting N -methylpyrrolidone as the dispersion liquid. By mixing the BP nanosheets with polyimide (PI), a piece of BP-PI film was obtained after evaporating the mixture in a petri dish. The BP-PI saturable absorber had a modulation depth of 0.47% and was inserted into an erbium-doped fiber laser to realize passive Q-switched operations. The repetition rate of the Q-switched laser increased from 5.73 kHz to 31.07 kHz when the laser pump was enhanced from 31.78 mW to 231.46 mW. Our results show that PI is an excellent host material to protect BP from oxidation, and the BP-PI film can act as a promising nonlinear optical device for laser applications.