Search

Background: Endovascular repair of thoracic aortic aneurysms (TAA) in elective settings has demonstrated successful clinical outcomes. However, life-threatening conditions such as rupture are more often managed with open surgical repair due to the high complexity of arch endovascular repair, lack of available off-the-shelf devices, and limited long-term data. Case Summary: A 49-year-old female with a recent history of prior ascending aortic repair for Type A10 aortic dissection presented with chest pain and dyspnea. Chest computed tomography angiogram (CTA) revealed acute bilateral pulmonary emboli and a 6.2 cm post dissection aneurysm of the posterior aortic arch with the dissection extending to the right iliac artery. She was treated with thrombolysis and subsequently became hemodynamically unstable. Repeat CTA revealed a massive left hemithorax with concern for aortic arch rupture. Given significant cardiorespiratory compromise and recent open repair, she was considered unfit for redo open repair. Thoracic endovascular aortic repair (TEVAR) with a physician-modified endograft (PMEG) was planned. An Alpha Zenith endograft was modified adding an internal branch for the innominate artery and a fenestration for the left common carotid artery. The left subclavian artery was occluded with a microvascular plug and coil embolization up to the level of the vertebral artery. TEVAR PMEG extension to the celiac artery was performed followed by deployment of a Zenith dissection stent to the aortic bifurcation. Completion angiogram demonstrated successful aneurysm exclusion and patency of target vessels. Conclusion: Endovascular treatment of ruptured TAA with PMEGs is feasible. This approach may be an alternative for unfit patients for open repair in emergent settings. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases have been the leading cause of global mortality and disability. In addition to traditional drug and surgical treatment, more and more studies investigate tissue engineering therapeutic strategies in cardiovascular medicine. Collagen interweaves in the form of trimeric chains to form the physiological network framework of the extracellular matrix of cardiac and vascular cells, possessing excellent biological properties (such as low immunogenicity and good biocompatibility) and adjustable mechanical properties, which renders it a vital tissue engineering biomaterial for the treatment of cardiovascular diseases. In recent years, promising advances have been made in the application of collagen materials in blood vessel prostheses, injectable cardiac hydrogels, cardiac patches, and hemostatic materials, although their clinical translation still faces some obstacles. Thus, we reviewed these findings and systematically summarizes the application progress as well as problems of clinical translation of collagen biomaterials in the cardiovascular field. The present review contributes to a comprehensive understanding of the application of collagen biomaterials in cardiovascular medicine. [ABSTRACT FROM AUTHOR]

Background: Penetrating aortic ulcers (PAU) are life-threatening conditions which derive from severely advanced atherosclerotic lesions of the aorta. The clinical course is unpredictable; thus clinical vigilance should be maintained. It is very challenging to separate PAU from co-existing AAS as predisposing factors and findings overlap. Case presentation: Case of 58-year-old gentleman, who presented for atypical chest pain in the setting of respiratory tract infection. Computed Tomographic angiography (CTA) of the chest showed a large PAU and intramural hematoma which rapidly progressed into an acute aortic dissection in the emergency department. Close follow up with cardiac point of care ultrasound one hour later detected an intimal flap which was not initially present on CTA. Patient underwent surgical aortic graft replacement and had an uneventful in-hospital stay. Discussion: This case underlines the importance of broadening differential diagnoses in atypical presentations in patients with risk factors. Prompt intervention and careful management are imperative to optimize patient outcomes and prevent complications of aortic lesions. Cardiac point of care ultrasound can help in detecting progression of dynamic atherosclerotic diseases such as acute aortic syndrome. [ABSTRACT FROM AUTHOR]

Objectives: Endovascular aneurysm repair, though minimally invasive and has the benefit of relatively low perioperative complication rates, it is associated with significant long term reintervention rates related to endoleaks. Several variables have been studied to predict the outcomes of endovascular aneurysm repair, 1 of which is the calcium burden of the vasculature. This prompted us to study the association between calcium burden measured by the standardized Agatston scoring system and the outcomes of Endovascular aneurysm repair. Methods: This is a retrospective study of patients who underwent Endovascular aneurysm repair from 2008 to 2020 at our institution and who had a non-contrast computerized tomography scan preoperatively, accounting for 87 patients. The calcium burden of the vasculature was measured by the Agatston scoring system allowing for better reproducibility, and the outcome variables included mortality and endoleaks. Results: Patients with higher median total calcium scores (≥12966.9) had significantly lesser survival (79.8% vs 52.3% (P =.002) at five years compared to patients with lower median total calcium score (<12966.9). Also, patients with type 2 endoleaks had higher calcium scores in above the aneurysm level ((1591.2 vs 688.2), P =.05)) compared to patients with no type 2 endoleaks. Conclusion: Calcium score assigned using a standardized Agatston scoring system can be used as a predictor of mortality risk assisting in deciding the treatment of choice for patients. [ABSTRACT FROM AUTHOR]

Objectives: To assess the safety and efficacy of the combination of brachial artery (BA) cutdown with purse-string suture (PSS) for BA preclosure during fenestrated thoracic endovascular aortic repair (f-TEVAR). Methods: We reviewed the consecutive data in our center from January 2022 to May 2023. Clinical data were analyzed retrospectively, including the baseline characteristics, procedural details, complications, and outcomes. Dichotomous data were summarized as absolute values and percentages. Continuous variables were presented as median values and interquartile ranges (IQRs). All patients underwent arterial cutdown with the PSS technique for BA preclosure. The technique was considered successful when complete hemostasis was achieved and confirmed by ultrasonography 24 h postoperatively. The patients were followed up 30 days postoperatively for access-related complications. Results: Forty-eight patients who underwent f-TEVAR with 48 BA access sites were included [36 males and 12 females; median age: 62 (IQR: 30-78) years]. The median body mass index was 27.3 (IQR: 21.2-32.7) kg/m2. The median access establishing and closing times were 7.8 (IQR: 6-9.3) min and 3.7 (IQR: 2.5-5) min, respectively. The median operative time and length of stay were 75 (IQR: 63-87) min and 7 (IQR: 5-9) days, respectively. Although the success rate was 100%, partial numbness in the median nerve distribution was noted in 1 patient in the forearm. This resolved spontaneously and no permanent neurological problem was seen. No other access-related complications were noted, and the total complication rate was 2.1% (1/48). Conclusions: BA preclosure with the PSS technique is safe and effective for left subclavian artery revascularization in Stanford B aortic dissection and can be another option for access closure during f-TEVAR. [ABSTRACT FROM AUTHOR]

Background Intrasaccular flow-disrupting devices are a safe and effective treatment strategy for intracranial aneurysms. We utilized high-frequency optical coherence tomography (HF-OCT) and digital subtraction angiography (DSA) to evaluate SEAL Arc, a new intrasaccular device, and compare the findings with the well-established Woven EndoBridge (WEB) device in an animal model of saccular aneurysms. Methods In a rabbit model, elastase-induced aneurysms were treated with SEAL Arc (n=11) devices. HF-OCT and DSA were performed after implant and repeated after 12 weeks. Device protrusion and malapposition were assessed at implant time and scored on a binary system. Aneurysm occlusion was assessed at 12 weeks with the WEB Occlusion Scale and dichotomized to complete (A and B) or incomplete (C and D) occlusion. The percentage of neointimal coverage after 12 weeks was quantified using HF-OCT. We compared these data to previously published historical controls treated with the gold-standard WEB device (n=24) in the same model. Results Aneurysm size and device placement were not significantly different between the two groups. Complete occlusion was demonstrated in 80% of the SEAL Arc devices, which compared favorably to the 21% of the aneurysms treated with WEB devices (P=0.002). Neointimal coverage across SEAL Arc devices was 86±15% compared with 49±27% for WEB (P=0.001). Protruding devices had significantly less neointimal coverage (P<0.001) as did incompletely occluded aneurysms (P<0.001). Histologically, all aneurysms treated with SEAL Arc devices were completely healed. Conclusion Complete early aneurysm occlusion was frequently observed in the SEAL Arc treated aneurysms, with significant neointimal coverage after 12 weeks. [ABSTRACT FROM AUTHOR]

BACKGROUND: Endovascular aneurysm repair (EVAR) is often attempted in patients with marginal anatomy. These patients midterm outcomes are available in the Vascular Quality Initiative for analysis. STUDY DESIGN: Retrospective analysis of prospectively collected data in the Vascular Quality Initiative from patients who underwent elective infrarenal EVAR between 2011 and 2018. Each EVAR was identified as either on- or off-instructions for use (IFU) based on aortic neck criteria. Multivariable logistic regression models were used to assess associations between aneurysm sac enlargement, reintervention, and type Ia endoleak with IFU status. Kaplan-Meier time-to-event models estimated reintervention, aneurysm sac enlargement, and overall survival. RESULTS: We identified 5,488 patients with at least 1 follow-up recorded. Those treated off-IFU included 1,236 patients ([23%] mean follow-up 401 days) compared with 4,252 (77%) treated on-IFU (mean follow-up 406 days). There was no evidence of significant differences in crude 30-day survival (96% vs 97%; p = 0.28) or estimated 2-year survival (97% vs 97%; log-rank p = 0.28). Crude type Ia endoleak frequency was greater in patients treated off IFU (2% vs 1%; p = 0.03). Off-IFU EVAR was associated with type Ia endoleak on multivariable regression model (odds ratio 1.84 [95% CI 1.23 to 2.76]; p = 0.003). Patients treated off IFU vs on IFU experienced had increased risk of reintervention within 2 years (7% vs 5%; log-rank p = 0.02), a finding consistent with results from the Cox modeling (hazard ratio 1.38 [95% CI 1.06 to 1.81]; p = 0.02). CONCLUSIONS: Patients treated off IFU were at greater risk for type Ia endoleak and reintervention, although they had similar 2-year survival compared with those treated on IFU. Patients with anatomy outside IFU should be considered for open surgery or complex endovascular repair to reduce the probability for revision.

Translation of small-diameter tissue-engineered vascular grafts (TEVGs) for the treatment of coronary artery disease (CAD) remains an unfulfilled promise. This is largely due to the limited integration of TEVGs into the native vascular wall-a process hampered by the insufficient smooth muscle cell (SMC) infiltration and extracellular matrix deposition, and low vasoactivity. These processes can be promoted through the judicious modulation of the SMC toward a synthetic phenotype to promote remodeling and vascular integration; however, the expression of synthetic markers is often accompanied by a decrease in the expression of contractile proteins. Therefore, techniques that can precisely modulate the SMC phenotypical behavior could have the potential to advance the translation of TEVGs. In this review, we describe the phenotypic diversity of SMCs and the different environmental cues that allow the modulation of SMC gene expression. Furthermore, we describe the emerging biomaterial approaches to modulate the SMC phenotype in TEVG design and discuss the limitations of current techniques. In addition, we found that current studies in tissue engineering limit the analysis of the SMC phenotype to a few markers, which are often the characteristic of early differentiation only. This limited scope has reduced the potential of tissue engineering to modulate the SMC toward specific behaviors and applications. Therefore, we recommend using the techniques presented in this review, in addition to modern single-cell proteomics analysis techniques to comprehensively characterize the phenotypic modulation of SMCs. Expanding the holistic potential of SMC modulation presents a great opportunity to advance the translation of living conduits for CAD therapeutics.

We report a multicenter experience of open conversions (OC) for aortic endograft infections (AEI). We retrospectively analyzed all patients who underwent OC for AEI after endovascular aneurysm repair (EVAR), from 1997 to 2021 in 12 Italian centers. The endpoints were as follows: mortality (30-days, in-hospital), major postoperative complications. Follow-up data included: survival, aortic-related complications, infection persistence or reoccurrence. Fifty-eight patients (mean age: 73.8 ± 6.6 years) were included. Median time from EVAR to OC was 14 months (interquartile range 7–45). Thirty-five patients (60.3%) were symptomatic at presentation. Aortic reconstruction was anatomic in 32 patients (55.2%), extra-anatomic in 26 (44.8%). Thirty-day mortality was 31% (18/58). Six additional patients died after 30 days during the same hospitalization (in-hospital mortality: 41.4%). Most common post-operative complications included respiratory failure (38.6%) and renal insufficiency (35.1%). During 28.1 ± 4 months follow-up, 4 aneurysm-related deaths were recorded. Infection re-occurred in 29.4% of the patients. Estimated survival was 50% at 1 year, and 30% at 5 years, and was significantly lower for patients who underwent extra-anatomic reconstructions (37 vs 61% at 1 year, 16 vs 45% at 5 years; log-rank P =.021). OC for AEI is associated with high early mortality. The poor mid-term survival is influenced by aortic complications and infection re-occurrence. [ABSTRACT FROM AUTHOR]

Objective: Analysis of gender-specific differences in short- and long-term outcome after elective open abdominal aortic aneurysm repair (OAR) regarding the distal anastomosis. Methods: In this retrospective cohort study, data from 4853 patients of a German health insurance company undergoing OAR for infrarenal abdominal aortic aneurysms (AAAs) between 2010 and 2016 were analysed. The patients were followed through 2018. Results: A total of 4050 (83.5%) men and 803 (16.6%) women underwent OAR. Women were older than men (72.9 ± 8.7 vs 69.8 ± 8.5 years; P <.001). A tube graft was used in 2644 (54.5%) patients, an aorto-biiliac bifurcated graft in 1657 (34.1%) and an aorto-bifemoral bifurcated graft in 552 (11.4%). Perioperative mortality was not significantly different between men (5.7%) and women (6.5%) in the total patient population (P =.411). This was true for aorto-aortic tube grafting (P =.361), aorto-biiliac reconstructions (P = 1.000) and aorto-bifemoral reconstructions (P =.345). Kaplan-Meier estimated long-term survival of men after 9 years was better than that of women (55.0% vs 43.8%; P =.006). However, separated by the site of the distal anastomosis, this was only true for aorto-aortic reconstructions (survival men vs women 56.0% vs 42.1%; P =.005), not for aorto-biiliac and aorto-bifemoral reconstructions. In the multivariate Cox regression analysis, age over 80 years, heart failure, aorto-bifemoral reconstruction, chronic kidney disease stage 3-5, chronic obstructive pulmonary disease, peripheral artery disease, arterial hypertension, but not gender (P =.531), had a negative impact on long-term survival. Conclusion: If possible, an aorto-aortic tube graft should be preferred to aorto-biiliac and aorto-bifemoral reconstructions in OAR. Patients selected for aorto-bifemoral artery reconstruction exhibit higher perioperative morbidity and mortality as well as worse long-term survival compared to patients selected for an intra-abdominal reconstruction. In the multivariate regression analysis, gender was not an independent risk factor for either short- or long-term outcomes. [ABSTRACT FROM AUTHOR]

Background: Abdominal aortic aneurysm (AAA) has a prevalence of 4.8%. AAA rupture is associated with significant mortality, thus surgical intervention is generally required once the aneurysm diameter exceeds 5.5 cm. Endovascular aneurysm repair (EVAR) is the predominant repair modality for AAA. However, in patients with complex aortic anatomy, fenestrated or branched EVAR is a superior repair option vs standard EVAR. Fenestrated and branched endoprostheses can be off-the-shelf or custom-made, which offers a more individualised approach. Aim: To summarise and evaluate the clinical outcomes achieved by fenestrated EVAR (FEVAR) and branched EVAR (BEVAR), and to explore the role of custom-made endoprostheses in contemporary AAA management. Methods: A literature search using Ovid Medline and Google Scholar was conducted to identify literature pertaining to the use and outcomes of fenestrated, branched, fenestrated-branched and custom-made endoprostheses for AAA repair. Results: FEVAR is an effective repair modality for patients with AAA that offers similar early survival, improved early morbidity but higher rates of reintervention in comparison to open surgical repair (OSR). Compared with standard EVAR, FEVAR is associated with similar in-hospital mortality yet higher rates of morbidity, especially regarding renal outcomes. BEVAR outcomes are rarely reported exclusively in the context of AAA repair. When reported, BEVAR is an acceptable alternative to EVAR in the treatment of complex aortic aneurysms and has similar reported complication issues to FEVAR. Custom-made grafts are a good alternative treatment option for complex aneurysms where hostile aneurysm anatomy precludes the use of conventional EVAR and sufficient time is available for the manufacturing of such devices. Conclusion: FEVAR offers a very effective treatment for patients with complex aortic anatomy and has been well-characterised over the past decade. RCTs and longer-term studies are desirable for unbiased comparison of non-standard EVAR modalities. [ABSTRACT FROM AUTHOR]

Objective: The objective of this study was to investigate the flow effects in different degrees of thoracic aortic stent graft protrusion extension by creating bird beak effect simulations using accurate 3D geometry and a realistic, nonlinear, elastic biomechanical model using computer-aided software SolidWorks. Methods: Segmentation in 3D of an aortic arch from a computed tomography (CT) scan of a real-life patient was performed using SolidWorks. A parametric analysis of three models was performed: (A) Aortic arch with no stent, (B) 3 mm bird-beak configuration, and (C) 6.5 mm bird-beak configuration. Flow velocity, pressure, vorticity, wall shear stress (WSS), and time average WSS were assessed. Results: The flow velocity in Model A remained relatively constant and low in the area of the ostium of the brachiocephalic artery and doubled in the left subclavian artery. On the contrary, Models B and C showed a decrease in velocity of 52.3 % in the left subclavian artery. Furthermore, Model B showed a drop in velocity of 82.7% below the bird-beak area, whereas Model C showed a decline of 80.9% in this area. The pressure inside the supra-aortic branches was higher in Model B and C compared with Model A. In Model A, vorticity only appeared at the level of the descending aorta, with low to non-vorticity in the aortic arch. In contrast, Models B and C had an average vorticity of 241.4 Hz within the bird beak area. Regarding WSS, Model A, and Model B shared similar WSS in the peak systolic phase, in the aortic arch, and the bird beak area, whereas Model C had an increased WSS by 5 Pa on average at these zones. Conclusion: In the present simulations' lower velocities, higher pressures, vortices, and WSS were observed around the bird beak zone, the aortic arch, and the supra-aortic vessels. [ABSTRACT FROM AUTHOR]

Introduction: Patients with complex aortic anatomy require meticulous surgical planning to optimize intraoperative and postoperative outcomes. The GORE Excluder Conformable Abdominal Aortic Aneurysm Endoprosthesis (CEXC Device, WL Gore and Associates, Flagstaff, AZ) allows for endovascular treatment of highly angulated and short proximal neck abdominal aortic aneurysms (AAA). Owing to its recent approval, short-term clinical outcomes of this device remain scarce. Report: In this report, we present a case series of 3 patients who underwent endovascular aortic repair using the GORE Excluder Conformable device with highly angulated (>70°) aortic neck anatomy. Endografts were deployed in a radiology suite using standard 2D angiography in conjunction with a CYDAR Medical (Wilmington, Delaware) reconstructed 3D overlay. The patients' ages were 85, 67, and 85 years. The mean abdominal aortic aneurysm diameter in these cases was 6.9 cm. The mean proximal neck length was 2.1 cm, proximal mean neck angulation was 83°. The mean operative time, total fluoroscopy time, and contrast used were 208 minutes, 28.3°minutes, and 94.5 milliliters, respectively. No adjunctive procedures, such as proximal cuff or endo-anchors, were performed at the time of index procedure. Discussion: Type Ia endoleak was observed in 1 patient post-operatively but after treatment with an aortic cuff there was no evidence of enlarging aneurysm sac. The GORE Excluder Conformable Endoprosthesis expands access to endovascular management of AAAs. Our early experience with this device demonstrated excellent patient and clinical outcomes in a highly angulated neck anatomy. [ABSTRACT FROM AUTHOR]

Background: Vascular graft infection is a very complex disease. Although complete excision of the infected grafts with extra-anatomic bypass or in situ reconstruction is a general treatment strategy, some concerns including reinfection in the new graft remain. Case Report: An 88 year-old man presented to the hospital with abdominal swelling and bleeding. The patient had undergone revascularization for aorto-iliac occlusive disease twice in the past. The first procedure had been performed 15 years previously, with right ilio-femoral bypass grafting for right iliac artery occlusion and stent implantation for left iliac artery stenosis. The second procedure had been performed 10 years previously, with aorta-to-left femoral and left-to-right femoro-femoral bypass grafting because the terminal aorta, the first ilio-femoral bypass graft, and the stent of the left iliac artery had been occluded. The patient was diagnosed with vascular graft infection, and endovascular therapy was selected as the revascularization method prior to graft excision. It was successfully performed using various devices and techniques, followed by graft excision without critical limb ischemia. Conclusion: This case demonstrates that endovascular therapy prior to graft excision can be an alternative revascularization method for vascular graft infection after bypass surgery for aorto-iliac occlusive disease. [ABSTRACT FROM AUTHOR]

Objective: Static 3-dimensional (3D) printing became attractive for operative planning in cases that involve difficult anatomy. An interactive (low cost, fast) 3D print allowing deliberate surgical practice can be used to improve interventional simulation and planning. Background: Endovascular treatment of complex aortic aneurysms is technically challenging, especially in case of narrow aortic lumen or significant aortic angulation (hostile anatomy). The risk of complications such as graft kinking and target vessel occlusion is difficult to assess based solely on traditional software measuring methods and remain highly dependent on surgeon skills and expertise. Methods: A patient with juxtarenal AAA with hostile anatomy had a 3-dimensional printed model constructed preoperatively according to computed tomography images. Endovascular graft implantation in the 3D printed aorta with a standard T-Branch Cook (Cook® Medical, Bloomington, IN, USA) was performed preoperatively in the simulation laboratory enabling optimized feasibility, surgical planning and intraoperative decision making. Results: The 3D printed aortic model proved to be radio-opaque and allowed simulation of branched endovascular aortic repair (BREVAR). The assessment of intervention feasibility, as well as optimal branch position and orientation was found to be useful for surgeon confidence and the actual intervention in the patient. There was a remarkable agreement between the 3D printed model and both CT and X-ray angiographic images. Although the technical success was achieved as planned, a previously deployed renal stent caused unexpected difficulty in advancing the renal stent, which was not observed in the 3D model simulation. Conclusion: The 3D printed aortic models can be useful for determining feasibility, optimizing planning and intraoperative decision making in hostile anatomy improving the outcome. Despite already offering satisfying accuracy at present, further advancements could enhance the 3D model capability to replicate minor anatomical deformities and variations in tissue density. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases are the most important cause of morbidity and mortality in the civilized world. Stenosis or occlusion of blood vessels leads not only to events that are directly life-threatening, such as myocardial infarction or stroke, but also to a significant reduction in quality of life, for example in lower limb ischemia as a consequence of metabolic diseases. The first synthetic polymeric vascular replacements were used clinically in the early 1950s. However, they proved to be suitable only for larger-diameter vessels, where the blood flow prevents the attachment of platelets, pro-inflammatory cells and smooth muscle cells on their inner surface, whereas in smaller-diameter grafts (6 mm or less), these phenomena lead to stenosis and failure of the graft. Moreover, these polymeric vascular replacements, like biological grafts (decellularized or devitalized), are cell-free, i.e. there are no reconstructed physiological layers of the blood vessel wall, i.e. an inner layer of endothelial cells to prevent thrombosis, a middle layer of smooth muscle cells to perform the contractile function, and an outer layer to provide innervation and vascularization of the vessel wall. Vascular substitutes with these cellular components can be constructed by tissue engineering methods. However, it has to be admitted that even about 70 years after the first polymeric vascular prostheses were implanted into human patients, there are still no functional small-diameter vascular grafts on the market. The damage to small-diameter blood vessels has to be addressed by endovascular approaches or by autologous vascular substitutes, which leads to some skepticism about the potential of tissue engineering. However, new possibilities of this approach lie in the use of modern technologies such as 3D bioprinting and/or electrospinning in combination with stem cells and prevascularization of tissue-engineered vascular grafts. In this endeavor, sex-related differences in the removal of degradable biomaterials by the cells and in the behavior of stem cells and pre-differentiated vascular cells need to be taken into account. [ABSTRACT FROM AUTHOR]

This document discusses the increasing demand for biomaterials in the field of human body repair. Biomaterials are materials made of metal, polymer, bioactive glass, ceramic, or a combination of these materials that are biocompatible and can be used to repair or replace tissue functions in the body. The document highlights various articles that explore the design and applications of biomaterials, including non-invasive blood glucose monitoring, 3D printing for maxillofacial surgery and artificial livers, reverse engineering for accurate bone models, and the mechanical behavior of different biomaterials used in medical procedures. The articles cover a range of topics related to biomaterials and their potential applications in healthcare. [Extracted from the article]

Background: Extra-anatomic ascending-to-descending aortic bypass grafts have historically been utilized as a safe and effective solution for repairs of complex coarctation of the aorta. However, reports on reoperation in these patients remain rare. We present a case of an aortic valve replacement and coronary artery bypass grafting in a patient with an extra-anatomic ascending-to-descending aortic bypass graft. Case presentation: The patient is a 59-year-old male with a complex aortic history, including repair of aortic coarctation with an ascending-to-descending aortic bypass graft 13 years prior, was admitted to the hospital for shortness of breath and chest pain that had developed over the past year. On further workup, he was found to have severe bileaflet aortic valve stenosis, non-ST elevation myocardial infarction, and moderate coronary artery disease. He underwent surgical aortic valve replacement and coronary artery bypass grafting. Given his unique anatomy, cardiopulmonary bypass approach involved separate cannulation of the right axillary and left common femoral arteries with cross-clamp of both the aorta and the extra-anatomic graft. Using this approach, the redo operation was successfully performed. Conclusions: Reports on reoperation after ascending-to-descending aortic bypass grafting are rare. We describe our approach to cardiopulmonary bypass and reoperation in a patient with an extra-anatomic ascending-to-descending aortic bypass graft. [ABSTRACT FROM AUTHOR]

Background: The Viabahn endoprosthesis has become a vital option for endovascular therapy, yet there is limited long-term data on its effectiveness for peripheral aneurysm repair. This study aimed to evaluate the safety, technical and clinical success, and long-term patency of the Viabahn endoprosthesis for treating femoropopliteal aneurysms. Methods: This retrospective tertiary single-center study analyzed patients who underwent a Viabahn endoprosthesis procedure for femoropopliteal aneurysm repair from 2010 to 2020. Intraoperative complications, technical and clinical success rates, and major adverse events (MAE, including acute thrombotic occlusion, major amputation, myocardial infarction, and device- or procedure-related death) at 30 days were assessed. Incidence of clinically-driven target lesion revascularisation (cdTLR) was noted. Patency rates were evaluated by Kaplan–Meier analysis. Results: Among 19 patients (mean age, 72 ± 12 years; 18 male, 1 female) who underwent aneurysm repair using the Viabahn endoprosthesis, there were no intraoperative adverse events, with 100% technical and clinical success rates. At the 30-day mark, all patients (19/19, 100%) were free of MAE. The median follow-up duration was 1,009 days [IQR, 462–1,466]. Popliteal stent graft occlusion occurred in 2/19 patients (10.5%) after 27 and 45 months, respectively. Consequently, the primary patency rates were 100%, 90%, 74% at 12, 24, and 36–72 months, respectively. Endovascular cdTLR was successful in both cases, resulting in sustained secondary patency at 100%. Conclusion: The use of Viabahn endoprostheses for femoropopliteal aneurysm repair demonstrated technical and clinical success rates of 100%, a 0% 30-day MAE rate, and excellent long-term patency. [ABSTRACT FROM AUTHOR]

Debranching thoracic endovascular aortic repair may disturb the implantation of a cardiac implantable electronic device in the anterior thoracic region. In case 1, the bypass graft between the right axillary artery, left axillary artery, and left common carotid artery disturbed pacemaker implantation from the left anterior thoracic region. Therefore, right‐sided implantation was selected. By contrast, in case 2, the bypass graft between axillary arteries in the anterior thoracic region was visible on fluoroscopy, and we performed conventional left‐sided pacemaker implantation with extra‐thoracic puncture. The pacemaker implantations were successful in both cases. The implantation strategies were affected by the number of debranched arteries and visibility of the bypass graft. [ABSTRACT FROM AUTHOR]

The search for optimal material for aortic infection reconstruction is ongoing. Our study presents the early and mid-term results of surgeon-constructed porcine pericardial tubes in the in-situ reconstruction of abdominal aortic infections, focusing on the safety as well as the durability of surgeon-created tubes. We performed a retrospective analysis of 8 patients treated for native aortic (n = 3) and aortic graft infections (n = 5) with surgeon-created tubes made of porcine pericardium patch (8 × 14 cm NO-REACT Ⓡ, BioIntegral Surgical Inc., Mississauga, ON, Canada). There were 7 males and 1 female, aged 68.5 (±4.8 years). Three patients had an aorto-enteric fistula. Technical success was obtained in all patients. Thirty-day mortality was 12.5% (n = 1). Mid-term follow-up was 12 months (2–63 months). One-year mortality was 37.5% (n = 3). Reintervention rate was 28.5% (n = 2). False aneurysm rate in the follow-up was 14.2% (n = 1). Surgeon-constructed porcine pericardial tubes seem to be a promising alternative as a replacement for native as well as graft-related abdominal aortic infections. The mid-term durability is encouraging, once the infection is controlled in cases with successful fistula repair and in native aortic infections patients. Further observations on larger groups, in longer follow-ups are necessary to confirm these preliminary observations. [ABSTRACT FROM AUTHOR]

Background: The image quality of computed tomography angiography (CTA) images following endovascular aneurysm repair (EVAR) is not satisfactory, since artifacts resulting from metallic implants obstruct the clear depiction of stent and isolation lumens, and also adjacent soft tissues. However, current techniques to reduce these artifacts still need further advancements due to higher radiation doses, longer processing times and so on. Thus, the aim of this study is to assess the impact of utilizing Single-Energy Metal Artifact Reduction (SEMAR) alongside a novel deep learning image reconstruction technique, known as the Advanced Intelligent Clear-IQ Engine (AiCE), on image quality of CTA follow-ups conducted after EVAR. Materials: This retrospective study included 47 patients (mean age ± standard deviation: 68.6 ± 7.8 years; 37 males) who underwent CTA examinations following EVAR. Images were reconstructed using four different methods: hybrid iterative reconstruction (HIR), AiCE, the combination of HIR and SEMAR (HIR + SEMAR), and the combination of AiCE and SEMAR (AiCE + SEMAR). Two radiologists, blinded to the reconstruction techniques, independently evaluated the images. Quantitative assessments included measurements of image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), the longest length of artifacts (AL), and artifact index (AI). These parameters were subsequently compared across different reconstruction methods. Results: The subjective results indicated that AiCE + SEMAR performed the best in terms of image quality. The mean image noise intensity was significantly lower in the AiCE + SEMAR group (25.35 ± 6.51 HU) than in the HIR (47.77 ± 8.76 HU), AiCE (42.93 ± 10.61 HU), and HIR + SEMAR (30.34 ± 4.87 HU) groups (p < 0.001). Additionally, AiCE + SEMAR exhibited the highest SNRs and CNRs, as well as the lowest AIs and ALs. Importantly, endoleaks and thrombi were most clearly visualized using AiCE + SEMAR. Conclusions: In comparison to other reconstruction methods, the combination of AiCE + SEMAR demonstrates superior image quality, thereby enhancing the detection capabilities and diagnostic confidence of potential complications such as early minor endleaks and thrombi following EVAR. This improvement in image quality could lead to more accurate diagnoses and better patient outcomes. [ABSTRACT FROM AUTHOR]

Background: An aortoesophageal fistula can prove to be fatal. Salvage thoracic endovascular aortic repair as a bridging therapy and radical surgery with thoracotomy should be considered while treating aortoesophageal fistula without spontaneous closure. Moreover, it is essential to select a technique that reduces the risk of reinfection. Here we report a rare case of a ruptured thoracic aortic aneurysm related to esophageal perforation by a fish bone that led to massive hematemesis and shock, and the surgical treatment of an aortoesophageal fistula that developed after salvage thoracic endovascular aortic repair. Case presentation: A 70-year-old Japanese female patient was admitted with hematemesis, thoracic pain, and shock related to esophageal perforation of a ruptured descending aortic aneurysm caused by fish bone aspiration and esophageal perforation 1 month previously. An emergency thoracic endovascular aortic repair was performed. Postoperatively, an aortoesophageal fistula that remained open and a food intake-related increase in the inflammatory response was noted. Radical blood-vessel prosthesis implantation and fistula closure were performed. The patient's postoperative course was favorable and the patient was discharged 22 days after the blood vessel prosthesis implantation. Conclusion: Such a case of rupture of a descending aortic aneurysm related to perforation by a fish bone and an aortoesophageal fistula is considerably rare. Thus, we report the therapeutic strategy of this particular case and review the relevant literature. [ABSTRACT FROM AUTHOR]

PURPOSE: Standard endovascular aortic aneurysm repair (EVAR) is sometimes the only treatment option for patients with hostile aortic neck anatomy, but it carries an increased risk of both early and late procedure-related complications. The aim of this study was to report on single-center experience with the Heli-FX EndoAnchors (Medtronic, Santa Rosa, CA) as an adjunctive procedure to endovascular aneurysm repair (EVAR) for prevention and perioperative treatment of proximal neck complications in patients with hostile neck anatomy. MATERIALS AND METHODS: A single-centre, retrospective study evaluating 24 consecutive patients treated with EndoAnchors during the index EVAR procedure between November 2018 and August 2021. EndoAnchor implantation was indicated for cases with hostile proximal aortic neck anatomy characterised by the presence of at least one of the following parameters: length of <15 mm, diameter of >28 mm, angle of >60°, circumferential thrombus/calcification involving ≥50%, and reverse taper. RESULTS: Median follow-up period was 22.5 months (IQR 2-31.5 months) with no aneurysm-related death, rupture, or conversion to open surgical repair during the follow-up. The procedural success rate was 100%, with no type Ia endoleak at the completion angiography. A mean of 7 EndoAnchors was used per patient (range 4-12). There were no EndoAnchor fractures and dislocations or stent graft fabric damage due to anchor implants. Twenty-three patients (95.8%) remained free of type Ia endoleak and migration on follow-up imaging. Aneurysm sac regression was observed in 13 patients (54.1%), while in 8 patients (33.3%) the sac remained stable. Sac enlargement was present in 1 patient (4.2%) due to late type Ia endoleak. Two patients were lost to the follow-up immediately after the proce dure. Between two groups of patients (sac regression versus failure to regress), the larger initial diameter of the proximal neck was the only significant independent factor associated with a lower possibility of sac regression (p= 0,021). CONCLUSIONS: The use of EndoAnchors during the index EVAR procedure in cases with challenging aortic neck anatomy with or without perioperative type Ia endoleak was associated with good midterm results and led to sac regression in most of the patients (Tab. 4, Fig. 3, Ref. 31). Text in PDF www.elis.sk [ABSTRACT FROM AUTHOR]

To improve the clinical safety and effectiveness of vascular prostheses, influence laws of the wall structure of textile based vascular prostheses on the properties were studied in this article. Polyester multifilament was utilized to weave four types of vascular prostheses samples with varying specifications based on the number of weft yarns and warp density. The total tightness of the fabric ranged from 79.6%, 82.0%, 89.2% to 96.1%. The impact of different wall structures on the water permeability and biomechanical properties of the vascular prostheses were examined. The results demonstrate an exponential correlation between total tightness and both water permeability and biomechanical properties of the tubular wall. When the warp density is 900 pieces/10 cm, and the weft yarn is double-ply (222 dtex/96 f) with total tightness of 96.1%, he performance of vascular prostheses is optimal. At this time, the porosity is 50.95% and the water permeability is only 12.1 mL/(cm²⋅min). Furthermore, the circumferential tensile strength can reach 213.5 x 10-5 kN/mm, and the probe burst trength can reach 595.23 X 10-3 kN, which are both superior to the compared domestic commercial woven polyester vascular prostheses and have a certain significance for reference. [ABSTRACT FROM AUTHOR]

Purpose: We aimed to assess risk factors of candida-related Vascular Graft Infections (VGIs). Methods: We did a case–control study (1:4) matched by age and year of infection, nested in a cohort of patient with a history of VGIs. Cases were defined by a positive culture for Candida spp. in biological samples and controls were defined by a positive culture for bacterial strains only in biological samples. Risk factors for Candida-related VGIs were investigated using multivariate logistic regression. Mortality were compared using survival analysis. Results: 16 Candida-related VGIs were matched to 64 bacterial-related VGIs. The two groups were comparable regarding medical history and clinical presentation. Candida-related VGIs were associated with bacterial strains in 88% (14/16). Gas/fluid-containing collection on abdominal CT scan and the presence of an aortic endoprosthesis were risk factors for Candidaspp.-related VGIs [RRa 10.43 [1.81–60.21] p = 0.009 RRa and 6.46 [1.17–35.73] p = 0.03, respectively]. Candida-related VGIs were associated with a higher mortality when compared to bacterial-related VGIs (p = 0.002). Conclusions: Candida-related VGIs are severe. Early markers of Candidaspp. infection are needed to improve their outcome. The suspicion of aortic endoprosthesis infection may necessitate probabilistic treatment with antifungal agents. [ABSTRACT FROM AUTHOR]

Background: Autologous vein grafts are widely used for bypass procedures in cardiovascular surgery. However, these grafts are susceptible to failure due to vein graft disease. Our study aimed to evaluate the impact of the latest-generation FRAME external support on vein graft remodeling in a preclinical model. Methods: We performed autologous internal jugular vein interposition grafting in porcine carotid arteries for one month. Four grafts were supported with a FRAME mesh, while seven unsupported grafts served as controls. The conduits were examined through flowmetry, angiography, macroscopy, and microscopy. Results: The one-month patency rate of FRAME-supported grafts was 100% (4/4), whereas that of unsupported controls was 43% (3/7, Log-rank p = 0.071). On explant angiography, FRAME grafts exhibited significantly more areas with no or mild stenosis (9/12) compared to control grafts (3/21, p = 0.0009). Blood flow at explantation was higher in the FRAME grafts (145 ± 51 mL/min) than in the controls (46 ± 85 mL/min, p = 0.066). Area and thickness of neo-intimal hyperplasia (NIH) at proximal anastomoses were similar for the FRAME and the control groups: 5.79 ± 1.38 versus 6.94 ± 1.10 mm2, respectively (p = 0.558) and 480 ± 95 vs. 587 ± 52 μm2/μm, respectively (p = 0.401). However, in the midgraft portions, the NIH area and thickness were significantly lower in the FRAME group than in the control group: 3.73 ± 0.64 vs. 6.27 ± 0.64 mm2, respectively (p = 0.022) and 258 ± 49 vs. 518 ± 36 μm2/μm, respectively (p = 0.0002). Conclusions: In our porcine model, the external mesh FRAME improved the patency of vein-to-carotid artery grafts and protected them from stenosis, particularly in the mid regions. The midgraft neo-intimal hyperplasia was two-fold thinner in the meshed grafts than in the controls. [ABSTRACT FROM AUTHOR]

Background Physician variablity in preoperative planning of endovascular implant deployment and associated inaccuracies have not been documented. This study aimed to quantify the variability in accuracy of physician flow diverter (FD) planning and directly compares it with PreSize Neurovascular (Oxford Heartbeat Ltd) software simulations. Methods Eight experienced neurointerventionalists (NIs), blinded to procedural details, were provided with preoperative 3D rotational angiography (3D-RA) volumetric data along with images annotated with the distal landing location of a deployed Surpass Evolve (Stryker Neurovascular) FD from 51 patient cases. NIs were asked to perform a planning routine reflecting their normal practice and estimate the stent's proximal landing using volumetric data and the labeled dimensions of the FD used. Equivalent deployed length estimation was performed using PreSize software. NI-and softwareestimated lengths were compared with postprocedural observed deployed stent length (control) using Bland-- Altman plots. NI assessment agreement was assessed with the intraclass correlation coefficient (ICC). Results The mean accuracy of NI-estimated deployed FD length was 81% (±15%) versus PreSize's accuracy of 95% (±4%), demonstrating significantly higher accuracy for the software (p<0.001). The mean absolute error between estimated and control lengths was 4 mm (±3.5 mm, range 0.03--30.2 mm) for NIs and 1 mm (±0.9 mm, range 0.01--3.9 mm) for PreSize. No discernable trends in accuracy among NIs or across vasculature and aneurysm morphology (size, vessel diameter, tortuousity) were found. Conclusions The study quantified experienced physicians' significant variablity in predicting an FD deployment with current planning approaches. In comparison, PreSize-simulated FD deployment was consistently more accurate and reliable, demonstrating its potential to improve standard of practice. [ABSTRACT FROM AUTHOR]

This retrospective study investigated the efficacy of endovascular treatment with multilayer flow modulators (MFMs) for treating aortic aneurysms in high-risk patients unsuitable for conventional treatments. Conducted from 2011 to 2019 at a single center, this retrospective observational study included 17 patients who underwent endovascular treatment with MFMs. These patients were selected based on their unsuitability for traditional surgical or endovascular procedures. The study involved meticulous pre-procedural planning, precise implantation of MFMs, and follow-up using CT angiography. The primary focus was on volumetric and flow volume changes in aneurysms, along with traditional diameter measurements. Moreover, the technical success and post-procedural complications were also registered. The technical success rate was 100%, and 30-day procedural complication rate was 17.6%. Post-treatment assessments revealed that 11 out of 17 patients showed a decrease in flow volume within the aneurysm sac, indicative of a favorable hemodynamic response. The median decrease in flow volume was 12 ml, with a median relative decrease of 8%. However, there was no consistent reduction in aneurysm size; most aneurysms demonstrated a median increase in volume for 46 ml and median increase in diameter for 18 mm. While MFMs offer a potential alternative for high-risk aortic aneurysm patients, their effectiveness in preventing aneurysm expansion is limited. The results suggest that MFMs can provide a stable hemodynamic environment but do not reliably reduce aneurysm size. This underscores the need for ongoing vigilance and long-term monitoring in patients treated with this technology. [ABSTRACT FROM AUTHOR]

ObjectiveThe introduction of endovascular procedures has revolutionized the management of complex aortic aneurysms. Although repair has traditionally required longer operative times and increased radiation exposure compared with simple endovascular aneurysm repair, the recent introduction of three-dimensional technology has become an invaluable operative adjunct. Surgical augmented intelligence (AI) is a rapidly evolving tool initiated at our institution in June 2019. In our study, we sought to determine whether this technology improved patient and operator safety.MethodsA retrospective review of patients who had undergone endovascular repair of complex aortic aneurysms (pararenal, juxtarenal, or thoracoabdominal), type B dissection, or infrarenal (endoleak, coil placement, or renal angiography with or without intervention) at a tertiary care center from August 2015 to November 2021 was performed. Patients were stratified according to the findings from intelligent maps, which are patient-specific AI tools used in the operating room in conjunction with real-time fluoroscopic images. The primary outcomes included operative time, radiation exposure, fluoroscopy time, and contrast use. The secondary outcomes included 30-day postoperative complications and long-term follow-up. Linear regression models were used to evaluate the association between AI use and the main outcomes.ResultsDuring the 6-year period, 116 patients were included in the present study, with no significant differences in the baseline characteristics. Of the 116 patients, 76 (65.5%) had undergone procedures using AI and 40 (34.5%) had undergone procedures without AI software. The intraoperative outcomes revealed a significant decrease in radiation exposure (AI group, 1955 mGy; vs non-AI group, 3755 mGy; P = .004), a significant decrease in the fluoroscopy time (AI group, 55.6 minutes; vs non-AI group, 86.9 minutes; P = .007), a decrease in the operative time (AI group, 255 minutes; vs non-AI group, 284 minutes; P = .294), and a significant decrease in contrast use (AI group, 123 mL; vs non-AI group, 199 mL; P

Background Semi-automated software is essential for planning and prosthesis selection prior transcatheter aortic valve replacement (TAVR). Reliable data on the usability of software programs for planning a TAVR is missing. The aim of this study was to compare software programs ‘Valve Assist 2’ (GE Healthcare) and 3mensio ‘Structural Heart’ (Pie Medical Imaging) regarding usability and accuracy of prosthesis size selection in program-inexperienced users. Methods Thirty-one participants (n=31) were recruited and divided into program-inexperienced users (beginners) (n=22) and experts (n=9). After software training, beginners evaluated 3 patient cases in 129 measurements (n=129) using either Valve Assist 2 (n=11) or Structural Heart (n=11) on 2 test days (T1, T2). System Usability Scale (SUS) and ISONORM 9241/110-S (ISONORM) questionnaire were used after the test. The valve size selected by each begin‑ ner was compared with the valve size selected from expert group. Results Valve Assist 2 had higher SUS Score: median 78.75 (25th, 75th percentile: 67.50, 85.00) compared to Structural Heart: median 65.00 (25th, 75th percentile: 47.50, 73.75), (p<0,001, r=0.557). Also, Valve Assist 2 showed a higher ISONORM score: median 1.05 (25th, 75th percentile:−0.19, 1.71) compared to Structural Heart with a median 0.05 (25th, 75th percentile:−0.49, 0.13), (p=0.036, r=0.454). Correctly selected valve sizes were stable over time using Valve Assist 2: 72.73% to 69.70% compared to Structural Heart program: 93.94% to 40% (χ2 (1)=21.10, p<0.001, φ=0.579). Conclusion The study shows signifcant better usability scores for Valve Assist 2 compared to 3mensio Structural Heart in program-inexperienced users. [ABSTRACT FROM AUTHOR]

Objectives: The aim of this retrospective study was to evaluate the results of complementary TEVAR following the frozen elephant trunk (FET) procedure for patients with residual type A aortic dissection (rTAAD) in terms of technical feasibility, safety and mid-term outcomes. Methods: This was a retrospective single-centre analysis of patients who received TEVAR after FET for rTAAD from January 2012 up to December 2021. The primary endpoint was technical success. Safety parameters included 30-day/in-hospital morbidity and mortality. Furthermore, mid-term clinical and morphological outcomes were evaluated. Results: Among 587 TEVAR procedures, 60 patients (11 with connective tissue disorders) who received TEVAR after FET for rTAAD were identified. The median interval between FET and TEVAR was 28.5 months. Indications for TEVAR after FET were true lumen collapse distal to FET prosthesis (n = 7), dSINE (n = 2), planned completion (n = 13) and aortic diameter progression (n = 38). In forty-seven patients, TEVAR was performed in an elective setting; eight and six patients were operated on in an urgent or emergency setting, respectively. All TEVAR procedures were successfully completed. The 30-day mortality and spinal cord ischemia rates were 1.7%. During a median follow-up of 37 months, two further patients died. Nine patients had to undergo a further aortic intervention: fenestrated stent-graft (n = 3) or open repair of the infrarenal abdominal aorta (n = 6). Conclusions: Complementary TEVAR following FET for rTAAD showed excellent technical success and low perioperative risk, supporting the feasibility and safety of this strategy. Despite the favourable mid-term survival, certain patients might require a further aortic procedure. [ABSTRACT FROM AUTHOR]

Background: Cases of abdominal aortic aneurysm discovered as purpura on the extremities with disseminated intravascular coagulation (DIC) are rare. The number of currently established strategies for the control of DIC with aortic aneurysm is limited. Case presentation: An 85-year-old woman was referred to the hematology department because of purpura on her shoulder and thigh. Enhanced fibrinolytic-type DIC was diagnosed by a blood test. Enhanced computed tomography (CT) revealed 60-mm abdominal aortic and 42-mm right common iliac aneurysms. We performed endovascular aneurysm repair (EVAR) and coiling of the right internal iliac artery with postoperative administration of Nafamostat mesylate. The patient promptly recovered from DIC, and the purpura gradually disappeared. Conclusions: We safely performed EVAR with postoperative administration of Nafamostat mesylate for an abdominal aortic aneurysms that presented as symptomatic DIC. [ABSTRACT FROM AUTHOR]

Background: Conventional graft replacement for a juxtarenal abdominal aortic aneurysm (JRAAA) remains challenging for high-risk patients since it often requires the reconstruction of some visceral arteries. Case Presentation: A 76-year-old woman was diagnosed with an 87 × 48 mm saccular JRAAA. Open graft replacement was contraindicated because of frailty and a past history of trans-thoracoabdominal esophagectomy. Chimney endovascular aortic repair (ChEVAR) with three chimney endografts was successfully performed without any endoleaks, and each visceral circulation was kept intact. The patient was discharged uneventfully on postoperative day 8. Significant shrinkage of the aneurysmal sac and preservation of flow through each chimney graft were observed on computed tomography 6 months postoperatively, with no significant increase in serum creatinine levels on laboratory testing. Conclusions: ChEVAR can be a useful surgical option instead of conventional operations, especially for high-risk cases. [ABSTRACT FROM AUTHOR]

A 66-year-old man presented with hemolytic anemia, which required frequent blood transfusion, 6 months after surgical repair of an ascending aortic pseudoaneurysm. Hemolysis was attributed to luminal stenosis caused by graft kinking by laboratory test, CT and four-dimensional magnetic resonance imaging. First, an Excluder cuff was placed at the stenotic site under rapid pacing, but it migrated distally. Thereafter a Palmaz XL stent was placed at the stenotic site, which led to resolution of anemia. In this case, a Palmaz XL stent was successfully used to treat hemolytic anemia caused by graft kinking following ascending aortic surgery. [ABSTRACT FROM AUTHOR]

In the past two decades, the method of endovascular therapy, particularly utilizing covered stents, has been widely employed to treat arteriovenous fistulas (AVF) following traumatic injury. In this report, we present a case study of a patient with post-traumatic femoral arteriovenous fistula treated using a Viabahn endoprosthesis, during which a rare occurrence of stent deployment obstruction was overcome via successful endovascular intervention. Leveraging the unique release line-based deployment mechanism of the Viabahn stent, we were able to adroitly respond to this emergency situation by adopting a suitable approach via minimally invasive endovascular means, and ultimately resolving the impasse. This approach averted the significant trauma associated with open surgical procedures. [ABSTRACT FROM AUTHOR]

Over the last few decades, the use of covered stent grafts became increasingly popular; as it plays a pivotal role in the management of various atherosclerotic diseases that are rising in both incidence and prevalence. Subsequently, vascular stent infections, although rare, are becoming a well-recognized complication with possibly devastating consequences, owing to the difficulties associated with its diagnosis and treatment. This has prompted significant interest in the condition regarding its pathophysiology, modifiable and non-modifiable risk factors, diagnostic and therapeutic approaches, and the possible implementation of prophylactic measures. We herein present a case of a patient with an infected aortoiliac stent 4 weeks after endovascular revision with atherectomy and additional stent insertion. The patient initially developed nonspecific symptoms and later developed a life-threatening hemorrhage, which was urgently controlled using a percutaneously inserted covered stent at the infected site. Definitive treatment using extraanatomical bypass implantation and an explantation of the infected stents was performed with excellent clinical response. [ABSTRACT FROM AUTHOR]

The double-barrel stenting (DBS) is a technique in which 2 parallel stents are simultaneously deployed through the same reinforced fenestration, into 2 adjacent target vessels. Prior reports describe the application of this technique for the treatment of superior mesenteric artery dissection with aneurysmal degeneration, coronary artery bifurcations, aortic arch branches, and intracranial aneurysms. The DBS technique is particularly useful in the context of fenestrated repair (FEVAR) of complex anatomy aortic aneurysms when the origin of visceral arteries branch off the aorta very close to each other or present early branches. We herein describe a case series including 7 patients who underwent a FEVAR procedure for thoracoabdominal and juxtarenal aortic aneurysms in which the presence of accessory renal arteries (ARA) or early renal branches was the reason for the application of this technique. Technical success was 100% and all stents were patent in the last follow-up CT scan (follow-up range: 1.8-62.8 months). There was only 1 small endoleak from indetermined source potentially related to the DBS, but the aneurysm sac decreased in size during follow-up and no secondary intervention was needed. Therefore, the DBS technique is a viable option for the incorporation of ARA or early renal branches to a fenestrated repair of aortic aneurysms with complex anatomy. [ABSTRACT FROM AUTHOR]

Background: Bypass surgery in severe aorto-iliac calcifications is a complex procedure. Aortic clamping can be highly risky and endovascular approach can be unsuccessful. We report our experience describing three cases of chronic mesenteric ischemia. In all three cases the preoperative computed tomography angiography revealed an ostial occlusion of the celiac trunk and of the superior mesenteric artery (SMA), a coral reef abdominal aorta, and severe calcification of the iliac arteries. An antegrade aorto-mesenteric bypass using a hybrid clampless anastomosis on the supraceliac aorta was performed. Results: The procedures were performed via laparotomy. We carried out the exposure of the anterior supraceliac aorta limited to the zone without major calcifications; then we performed a side-to-end media-adventitial anastomosis between the supraceliac aorta and a Dacron graft 7 mm without any arteriotomy or clamping. The proximal graft and the aortic anastomosis site were punctured using a 18 G needle. An introducer was then positioned over a wire through the prosthetic graft and pushed into the aorta. Balloon expandable covered stenting to open and stabilize the anastomosis site was performed. Finally, the graft was tunneled to the SMA, and an end-to-side anastomosis was performed. The postoperative courses were uneventful, and the patients were promptly discharged. The follow-up, which in the first case is 4 years, showed the complete patency of the graft in each of the cases treated. Conclusions: The hybrid clampless anastomosis appears to be safe and useful in cases of severe aortic calcification. [ABSTRACT FROM AUTHOR]

Abdominal aortic aneurysms (AAA) are most commonly observed in elderly male patients and are particularly rare in children. Among the pediatric population, they are usually diagnosed in the context of connective tissue disorders, genetic mutations, or vasculitis. The same is true of visceral arteries aneurysms. This case report describes the staged management of an 11-year-old patient presenting PIK3CA mutation and a 5.8 cm infrarenal AAA associated with bilateral common iliac arteries and multiple visceral aneurysms, the largest observed in the superior mesenteric artery (SMA = 3.2 cm). After careful evaluation, decision was made to first approach the most life-threatening lesion (the infrarenal AAA due to the large diameter) and the remaining aneurysms in secondary procedures, with special attention to the SMA aneurysm. The patient underwent a staged repair, with the first phase consisting of an aortobi-iliac graft with the distal anastomosis made at the left common iliac artery and right external iliac artery. The right hypogastric artery was ligated. The second procedure consisted of SMA aneurysm repair with a plication technique, as 7 branches were visualized coming off the aneurysm sac. Postoperative pathology analysis of the aortic and SMA aneurysms sac revealed vasculitis with a mixed inflammatory pattern and a COL3A1 gene heterozygote variant. He is currently in his 18th month after the last surgical intervention, receiving immunomodulatory therapy, with a planned follow-up by the interdisciplinary team to monitor the medications' side effects and the diameter of the remaining visceral aneurysms. [ABSTRACT FROM AUTHOR]

Purpose: Iliac limb occlusion (ILO) is a serious complication of endovascular abdominal aneurysm repair (EVAR). This study aimed to identify predictive factors for ILO derived from aortoiliac morphology, endovascular procedure-related parameters, and aneurysmal remodeling characteristics. Patients and Methods: Patient demographics, pre-EVAR anatomical characteristics of the aneurysm, endovascular procedure details, and post-EVAR aneurysmal remodeling outcomes were analyzed and compared using univariate analysis. Statistically significant factors were subsequently subjected to Cox regression and Kaplan–Meier analyses. Results: Between January 2013 and April 2022, 66 patients were included in this study. Fourteen patients presented with ILO and were compared with 52 control patients with patent endograft limb over at least 1-year of follow-up. The tortuosity indices of the common iliac artery (CIA) and endograft iliac limb to vessel oversizing were significantly larger in the ILO group than in the patent endograft limb group. The CIA index of tortuosity ≥ 1.08, and endograft iliac limb to vessel oversizing ≥ 18.8% were independent predictors for ILO. During the follow-up of all patients, the proximal aortic neck and CIA diameters increased, aneurysm sac diameter decreased, and aortic neck and aortic length increased. The aortoiliac length increased over time in patients with patent endograft limb but not in patients with ILO. A change in the lowest renal artery-left iliac bifurcation distance ≦0.07 mm increased the risk of ILO. Conclusion: ILO is predisposed to occur when the CIA index of tortuosity ≥ 1.08 and endograft iliac limb to vessel oversizing ≥ 18.8% are present. Significant aortoiliac remodeling, including proximal aortic neck dilatation, neck straightening, aneurysmal sac regression, iliac artery enlargement, and aortic lengthening, occurs after EVAR. Aortoiliac elongation was observed in patients with patent endograft limb, but not in patients with ILO. ILO was associated with a change in the lowest renal artery–left iliac bifurcation from the postoperative measurements ≦ 0.07 mm. [ABSTRACT FROM AUTHOR]

OBJECTIVES The goal of this multicentre retrospective cohort study was to evaluate technical success and early and late outcomes of thoracic endovascular repair (TEVAR) with grafts deployed upside down through antegrade access, to treat thoracic aortic diseases. METHODS Antegrade TEVAR operations performed between January 2010 and December 2021 were collected and analysed. Both elective and urgent procedures were included. Exclusion criteria were endografts deployed in previous or concomitant surgical or endovascular repairs. RESULTS Fourteen patients were enrolled; 13 were males (94%) with a mean age of 71 years (interquartile range 62; 78). Five patients underwent urgent procedures (2 ruptured aortas and 3 symptomatic patients). Indications for treatment were 8 (57%) aneurysms/pseudoaneurysms, 3 (21%) dissections and 3 (21%) penetrating aortic ulcers. Technical success was achieved in all procedures. Early mortality occurred in 4 (28%) cases, all urgent procedures. Median follow-up was 13 months (interquartile range 1; 44). Late deaths occurred in 2 (20%) patients, both operated on in elective settings. The first died at 19 months of aortic-related reintervention; the second died at 34 months of a non-aortic-related cause. Two patients (14%) underwent aortic-related reinterventions for late type I endoleak. The survival rate of those having the elective procedures was 100%, 84% and 67% at 12, 24 and 36 months, respectively. Freedom from reintervention was 92%, 56% and 56% at 12, 24 and 36 months, respectively. CONCLUSIONS Antegrade TEVAR can seldom be considered an alternative when traditional retrograde approach is not feasible. Despite good technical success and few access-site complications, this study demonstrates high rates of late type I endoleak and aortic-related reinterventions. [ABSTRACT FROM AUTHOR]

OBJECTIVES Our goal was to access early and mid-term outcomes of a gutter-plugging chimney stent graft for treatment of Stanford type B aortic dissections in the clinical trial Prospective Study for Aortic Arch Therapy with stENt-graft for Chimney technology (PATENCY). METHODS Between October 2018 and March 2022, patients with Stanford type B aortic dissections were treated with the Longuette chimney stent graft in 26 vascular centres. The efficiency and the incidence of adverse events over 12 months were investigated. RESULTS A total of 150 patients were included. The technical success rate was 99.33% (149/150). The incidence of immediate postoperative endoleak was 5.33% (8/150, type I, n = 6; type II, n = 1; type IV, n = 1) neurologic complications (stroke or spinal cord ischaemia); the 30-day mortality was 0.67% (1/150) and 1.33% (2/150), respectively. During the follow-up period, the median follow-up time was 11.67 (5–16) months. The patent rate of the Longuette graft was 97.87%. Two patients with type I endoleak underwent reintervention. The follow-up rate of the incidence of retrograde A type aortic dissection was 0.67% (1/150). There was no paraplegia, left arm ischaemia or stent migration. CONCLUSIONS For revascularization of the left subclavian artery, the Longuette chimney stent graft can provide an easily manipulated, safe and effective endovascular treatment. It should be considered a more efficient technique to prevent type Ia endoleak. Longer follow-up and a larger cohort are needed to validate these results. CLINICAL TRIAL REGISTRY NUMBER NCT03767777 [ABSTRACT FROM AUTHOR]

The number of endovascular aortic repairs (EVARs) has surpassed the number of open surgical repairs of abdominal aortic aneurysms (AAAs) worldwide. The available commercial endoprostheses are composed of materials that are stiffer than the native aortic wall. As a consequence, the implantation of stent–graft endoprostheses during EVAR increases aortic rigidity and thus aortic stiffness, resulting in a decrease in abdominal aorta compliance. EVAR has been found to have a possibly harmful effect not only on heart functions but also on other vascular beds, including kidney function, due to the decrease in aortic compliance that it causes. Aortic stiffness is measured by various hemodynamic indices like the pulse wave velocity (PWV), the central aortic pressure (CAP), and the augmentation index (AIx). In the literature, there are increasing numbers of studies investigating the properties of endografts, which are strongly related to increases in aortic stiffness. However, there is a lack of data on whether there is a correlation between the length of various endografts implanted during EVAR and the increase in the PWV, CAP, and AIx postoperatively compared to the preoperative values. The aim of this prospective, observational, monocentric, single-arm study is to investigate the correlation between endograft length and the postoperative increase in the PWV, CAP, and AIx in patients subjected to EVAR. Additionally, this study intends to identify other endograft properties related to increases in the PWV, CAP, and AIx. Other endpoints to be studied are the existence of immediate postoperative myocardial and kidney injury after EVAR. The prediction of cardiovascular events caused by endograft-related increased aortic stiffness could contribute to the improvement of various endograft properties so that the impact of endografts on the native aortic wall can be minimized. [ABSTRACT FROM AUTHOR]

Background: Total endovascular technique with fenestrated endovascular graft might be hampered for the late dilatation of proximal landing zone, which may cause endografts migration. We describe a successful urgent hybrid procedure for extent III thoracoabdominal aortic aneurysm with aortic intramural hematoma. Case Presentation: A 55-year-old female with thoracoabdominal aortic aneurysm was considered at high surgical risk and unfit for open repair due to multiple comorbidities. Therefore, a hybrid procedure of surgeon-modified fenestrated endovascular graft combined with thoracoscope-assisted Transaortic epicardial fixation of endograft was finally chosen and performed in the endovascular operating room. A 3-port technique was performed through a left video-assisted thoracoscopic approach. After the first tampering stent-graft was deployed, a double-needle suture was penetrated both the aortic wall and stent-graft to fixate it in the proximal descending aorta. Then the second endograft, which had been fenestrated on table, was introduced and oriented extracorporeally by rotating superior mesenteric artery and left renal artery fenestration radiopaque markers and deployed with perfect apposition between the fenestrations and target visceral artery. Each vessel was sequentially stented using Viabahn self-expandable stent to finish target vessel stenting. An Ankura cuff stent was deployed in the distal abdominal aortic artery. Conclusion: Surgeon-modified fenestrated endovascular graft combined with thoracoscope-assisted fixation may be an innovative and viable alternative for selected high-risk patients with extent III thoracoabdominal aortic aneurysm. A longer follow-up is needed to ascertain the success of this approach. [ABSTRACT FROM AUTHOR]

Background: This study examines the impact of the use of the combination of BeGraft and Solaris stent grafts on the outcomes during the covered endovascular reconstruction of aortic bifurcation (BS-CERAB) technique and extension to the iliac arteries. Methods: Consecutive patients with aortoiliac occlusive disease who underwent endovascular treatment using BS-CERAB between January 2020 and December 2023 were included. Patient demographics, symptoms, lesion characteristics, and procedural and follow-up details were collected and analyzed. Perioperative complications and reinterventions were also identified. Results: A total of 42 patients met the inclusion criteria (32 men, 76.2%, median age 72 years, range 59–85). Indications for treatment were intermittent claudication (42.9%) and critical limb ischemia (57.1%). Procedure success was achieved in all cases. The median patient follow-up time was 14 months (1–36). One patient died at a 10-month follow-up due to lung cancer. The mean pre-operative ABI increased from 0.37 ± 0.19 before intervention to 0.71 ± 1.23 post-operatively at 12 months (p = 0.037). The estimated primary patency rates at 3, 6, and 12 months were 90.5%, 85.7%, and 81.0% and primary assisted patency rates were 90.5%, 90.5%, and 85.7%, respectively. Secondary patency was 95.2% at 3 and 6 months and 90.5% at a 12-month follow-up. Active cancer (p = 0.023, OR 2.12 95%CI 1.14–3.25) was a risk factor for restenosis. Conclusions: This mid-term experience shows that the CERAB technique using the combination of BeGraft and Solaris stents grafts, for the endovascular treatment of severe aortoiliac atherosclerotic disease, may allow an effective reconstruction of the aortic bifurcation and iliac arteries related to high-patency and lower-reintervention rates. [ABSTRACT FROM AUTHOR]

Background: Infective endocarditis (IE) poses a significant health risk, especially in patients with prosthetic heart valves. Despite advances in treatment, mortality rates remain high. This study aims to investigate the antibacterial properties of a copper titanium dioxide (4× Cu‐TiO2) coating on cardiovascular implants against Staphylococcus aureus, a common causative agent of IE. Methods: Titanium oxide carriers functionalized with copper ions were employed as an antibacterial coating for heart and vascular prostheses. The coating's antibacterial efficacy was assessed using S. aureus ATCC 29213. Microscopic evaluations were conducted on both biological and artificial materials. Antibacterial activity was qualitatively assessed via a modified disc diffusion method and quantitatively measured through colony counts in NaCl suspensions. Results: The coating process was successfully applied to all tested cardiovascular prosthetic materials. Qualitative assessments of antibacterial effectiveness revealed an absence of bacterial growth in the area directly beneath the coated valve. Quantitative evaluations showed a significant reduction in bacterial colonization on coated mechanical valves, with 2.95 × 104 CFU per valve, compared to 1.91 × 105 CFU in control valves. Conclusions: The 4× Cu‐TiO2 coating demonstrated promising antibacterial properties against S. aureus, suggesting its potential as an effective strategy for reducing the risk of bacterial colonization of cardiovascular implants. Further studies are needed to assess the longevity of the coating and its efficacy against other pathogens. [ABSTRACT FROM AUTHOR]

Background: While barbed sutures have been extensively utilized in other disciplines, they have not been widely adopted in cardiac surgery. The lack of safety and feasibility data has limited its use within the field. To aide in the further understanding of how cardiac surgeons can use barbed sutures, we sought to develop a high-pressure in vitro simulation model. We compared knotless barbed sutures in a highly pressurized anastomosis to conventional sutures. Methods: Ten specimens in total were utilized in prosthesis anastomosis, using 34 mm Gelweave Plexus (Terumo Aortic, Sunrise, FL 33325, USA) and 34 mm Hemabridge (Intergard Woven Hemabridge, Getinge, Göteborg, Sweden). Five models of size 3-0 barbed suture anastomoses using non-absorbable, barbed, self-retaining, monofilament polypropylene sutures (Filbloc® 3-0, Assut Europe, Rome, Italy) were compared against five conventional anastomoses using size 4-0 polypropylene monofilament (Ethicon, USA). The systems were connected using a novel-designed extracorporeal circulation system. Pressure was rapidly increased in the specimen to a mean pressure of 300–350 mmHg, running then for a minimum of 48 hours to assess anastomosis strength and endurance. Results: No anastomotic dehiscence or rupture was recorded. Complex, angular anastomosis required extra stitch leakage sutures in both conventional and barbed suture specimens. Conclusion: Using knotless barbed sutures with an additional self-locking maneuver for prosthesis-prosthesis anastomosis in cardiac surgery is feasible in an in vitro model under long term, high-mean pressure when compared to conventional sutures. In vivo trials should be performed to further validate the in vitro findings. [ABSTRACT FROM AUTHOR]

The mechanical properties of the stent graft are important factors influencing the outcome of TEVAR treatment and the occurrence of postoperative complications. The aim of this study is to improve and design a mechanical performance testing equipment for thoracic aortic stent grafts. The mechanical performance testing equipment consists of a radial force testing equipment of the stent graft designed by the wire compression grip method and a dynamic straightening force testing device with stable and controllable test conditions and continuously variable test angles. By constructing the testing equipment to physically measure the stent specimen, the experimental results reflect the trend of change and the simulation results are basically consistent, i.e. the mechanical properties of the thoracic aortic stent designed in this study is feasible and the measured data are valid. The testing equipment can provide the basis and reference direction for the quality testing of stent graft products, optimisation of mechanical properties of stent grafts and R&D innovation. [ABSTRACT FROM AUTHOR]

One of the most serious complications after surgical interventions on the arteries of the lower extremities is thrombosis of the vascular prosthesis. Unfortunately, it is almost impossible to protect the patient from contact with the surgical thread with flowing blood, which makes the location of the surgical operation a focus of thrombosis. The purpose of this scientific study is to evaluate the possibility of modifying the surface of a polypropylene thread with heparin using chemical inoculation in order to increase the thromboresistant properties of the suture material. To do this, a polyhydroxybutyrate/oxivalerate copolymer and a heparin solution were applied to the surface of the polypropylene filament. An additional sublayer of polymethacrylyl chloride contributed to the strong inoculation of heparin to the polymer. The polymer substrate reacted with heparin to form strong covalent ester bonds. Applying a thin and uniform layer of polyhydroxybutyrate/oxivalerate to the thread with a thickness of no more than 4 microns makes its surface smooth. After chemical modification and application of heparin to the surface of the thread, it acquired a uniform spongy structure, due to the formation of a new polymer layer with firmly grafted heparin. Thus, it is possible to create a bio- and hemocompatible coating based on a biodegradable polymer and heparin on the surface of a polypropylene thread. [ABSTRACT FROM AUTHOR]