Search

Soil moisture profile sensors (SMPSs) have a high potential for climate-smart agriculture due to their easy handling and ability to perform simultaneous measurements at different depths. To date, an accurate and easy-to-use method for the evaluation of long SMPSs is not available. In this study, we developed laboratory and field experiments to evaluate three different SMPSs (SoilVUE10, Drill&Drop, and SMT500) in terms of measurement accuracy, sensor-to-sensor variability, and temperature stability. The laboratory experiment features a temperature-controlled lysimeter to evaluate intra-sensor variability and temperature stability of SMPSs. The field experiment features a water level-controlled sandbox and reference TDR measurements to evaluate the soil water measurement accuracy of the SMPS. In both experiments, a well-characterized fine sand was used as measurement medium to ensure homogeneous dielectric properties in the measurement domain of the sensors. The laboratory experiments with the lysimeter showed that the Drill&Drop sensor has the highest temperature sensitivity with a decrease of 0.014 m3 m−3 per 10 °C, but at the same time showed the lowest intra- and inter-sensor variability. The field experiment with the sandbox showed that all three SMPSs have a similar performance (average RMSE ≈ 0.023 m3 m−3) with higher uncertainties at intermediate soil moisture contents. The presented combination of laboratory and field tests were found to be well suited to evaluate the performance of SMPSs and will be used to test additional SMPSs in the future. [ABSTRACT FROM AUTHOR]

Long-range weather forecasts provide predictions of atmospheric, ocean and land surface conditions that can potentially be used in land surface and hydrological models to predict the water and energy status of the land surface or in crop growth models to predict yield for water resources or agricultural planning. However, the coarse spatial and temporal resolutions of available forecast products have hindered their widespread use in such modelling applications that usually require high resolution input data. In this study, we applied sub-seasonal (up to 4 months) and seasonal (7 months) weather forecasts from the latest European Centre for Medium-Range Weather Forecasts (ECMWF) seasonal forecasting system (SEAS5) in a land surface modelling approach using the Community Land Model version 5.0 (CLM5). Simulations were conducted for 2017-2020 forced with subseasonal and seasonal weather forecasts over two different domains with contrasting climate and cropping conditions: the German state of North Rhine-Westphalia and the Australian state of Victoria. We found that, after pre-processing of the forecast products (temporal downscaling of precipitation and incoming shortwave radiation), the simulations forced with seasonal and sub-seasonal forecasts were able to generate a model system response very close to reference simulation results forced by reanalysis data. Differences between seasonal and sub-seasonal experiments were insignificant. The forecast experiments were able to satisfactorily capture recorded inter-annual variations of crop yield. In addition, they also reproduced the generally higher inter-annual variability in crop yield across the Australian domain (approximately 50 % inter-annual variability in recorded yields and up to 17 % in simulated yields) compared to the German domain (approximately 15 % inter-annual variability in recorded yields and up to 5 % in simulated yields). The high and low yield seasons (2020 and 2018) among the four simulated years were clearly reproduced in forecast simulation results. Furthermore, sub-seasonal and seasonal simulations reflected the early harvest in the drought year of 2018 in the German domain. However, the simulated inter-annual yield variability was lower in all simulations compared to the official statistics. While general soil moisture trends, such as the European drought in 2018, were captured by the seasonal experiments, we found systematic over- and underestimations in both the forecast and the reference simulations compared to the Soil Moisture Active Passive Level-3 soil moisture product (SMAP L3) and the Soil Moisture Climate Change Initiative Combined dataset from the European Space Agency's (ESA CCI). These observed biases of soil moisture as well as the low inter-annual variability of simulated crop yield indicate the need to improve the representation of these variables in CLM5 to increase the model sensitivity to drought stress and other crop stressors. [ABSTRACT FROM AUTHOR]

To ensure the good chemical status of surface water across Europe, it is necessary to increase research on the comprehensive impact of land use and land cover changes, i.e., deforestation, on the natural environment. For this reason, we used data from 9-year environmental monitoring in the Wüstebach experimental catchment of the TERENO (Terrestrial Environmental Observatories) network to determine the impact of partial deforestation on solute fluxes and stream water ionic composition. In 2013, a partial deforestation experiment was conducted in the study area using a cut-to-length logging method. To this end, two headwater catchments were compared: one partially deforested (22% of the catchment area) and one untreated control catchment. The concentrations of ions in stream water, groundwater, and precipitation were analyzed: Ca2+, Mg2+, Na+, K+, Al3+, Fetot, Mn2+, NO3−, SO4−, and Cl−. Most of the ions (Na+, Ca2+, Mg2+, Cl−, and SO4−) showed decreasing trends in concentrations after deforestation, indicating a dilution effect in stream water due to the reduction of the supply of solutes with precipitation in the open deforested area. The fluxes of these ions decreased by 5–7% in the first year after deforestation, although the stream runoff increased by 5%. In the second year, the decrease in ion fluxes was greater, from 6% to 24%. This finding confirms that only limited soil erosion occurred after the deforestation because the soil was well protected during logging works by covering harvester lanes with branches. Only K+ and NO3− ions showed increasing trends in both concentrations and fluxes in the partially deforested catchment in the first two to three years after deforestation. Spruce die-offs, common in Europe, may decrease the concentration and fluxes of base cations in surface water in a nutrient-limited environment. However, the simultaneous planting of young broad-leaved trees with post-harvesting regrowth could create a nutrient sink that protects the catchment area from nutrient depletion. [ABSTRACT FROM AUTHOR]

Profile soil moisture (SM) in mountainous areas are significant in water resources management and ecohydrological studies of downstream arid watersheds. Satellite products are useful in providing spatially distributed SM information, but only have limited penetration depth (e.g. top 5 cm). In contrast, in situ observations can provide multi-depth measurements, but only with limited spatial coverage. Spatially continuous estimates of subsurface SM can be obtained from surface observations using statistical methods, but this requires sufficient coupling strength among surface and subsurface SM. This study evaluates methods to calculate subsurface SM from surface SM and an application to the satellite SM product based on a SM observation network in the Qilian Mountains (China) established since 2013. First, we used cross-correlation to analyze the coupling strength among surface (0-10 cm) and subsurface (10-20, 20-30, 30-50, 50-70 cm, and profile of 0-70 cm) SM. Our results indicated an overall strong coupling among surface and subsurface SM in this study area. Afterwards, three different methods were tested to estimate subsurface SM from in-situ surface SM: the exponential filter (ExpF), artificial neural networks (ANN) and cumulative distribution function matching (CDF) methods. The results showed that both ANN and ExpF methods were able to provide accurate estimates of subsurface soil moisture at 10-20 cm, 20-30 cm, and for the profile of 0-70 cm using surface (0-10 cm) soil moisture only. Specifically, the ANN method had the lowest estimation error (RSR) of 0.42, 0.62 and 0.49 for depths of 15 and 25 cm and profile SM, respectively, while the ExpF method best captured the temporal variation of subsurface soil moisture. Furthermore, it could be shown that the performance of the profile SM estimation was not significantly lower with using an area-generalized Topt (optimum T) compared to the station-specific Topt. In a final step, the ExpF method was applied to the satellite SM product (Soil Moisture Active Passive Level 3: SMAP_L3) to estimate profile SM, and the resulting profile SM was compared to in situ observations. The results showed that the ExpF method was able to estimate profile SM from SMAP_L3 surface products with reasonable accuracy (median R of 0.718). It was also found that the combination of ExpF method and SMAP_L3 surface product can significantly improve the estimation of profile SM in the mountainous areas in comparison to the SMAP_L4 root zone product. Overall, it was concluded that the ExpF method is able to estimate profile SM using SMAP surface products in the Qilian Mountains. [ABSTRACT FROM AUTHOR]

Soil water content is a key variable for understanding and modelling ecohydrological processes. Low-cost electromagnetic sensors are increasingly being used to characterize the spatio-temporal dynamics of soil water content, despite the reduced accuracy of such sensors as compared to reference electromagnetic soil water content sensing methods such as time domain reflectometry. Here, we present an effective calibration method to improve the measurement accuracy of low-cost soil water content sensors taking the recently developed SMT100 sensor (Truebner GmbH, Neustadt, Germany) as an example. We calibrated the sensor output of more than 700 SMT100 sensors to permittivity using a standard procedure based on five reference media with a known apparent dielectric permittivity (1 < Ka < 34.8). Our results showed that a sensor-specific calibration improved the accuracy of the calibration compared to single "universal" calibration. The associated additional effort in calibrating each sensor individually is relaxed by a dedicated calibration setup that enables the calibration of large numbers of sensors in limited time while minimizing errors in the calibration process. [ABSTRACT FROM AUTHOR]

Headwaters are a source of fresh water and material transported to the downstream sections of river channels. In most regions of Europe, the natural environment of headwaters has been significantly transformed by human activities, which is reflected in the quality of surface waters and the rate of solute fluxes. The aim of the study was to determine the anthropogenic impact on solute fluxes in a headwater catchment in Germany. The study area (Wüstebach experimental catchment) is located in the Eifel Mountains and is part of the TERENO (Terrestrial Environmental Observatories) network. The catchment is currently subject to the following anthropogenic pressures: the use of de-icing salts on the motorway running through the catchment and the logging of 22% of the forest area in 2013 by the National Park to promote the regeneration of near-natural beech forest. We used data from almost 13 years (June 2009-April 2022) of environmental monitoring in the Wüstebach catchment to calculate monthly and annual rates of solute fluxes. The concentrations of ions in stream water and precipitation were determined: Ca2+, Mg2+, Na+, K+, Al3+, Fetot, Mn2+, NH4+, NO3−, SO4−, and Cl−. Data from the Wüstebach catchment were compared with data from the control (untreated) catchment. The average annual rate of total dissolved solids in the Wüstebach catchment was 83 t/km2/a. Only the loads of four ions performed a significant difference after deforestation (SO4−, NH4+, Al3+, Fetot). However, total dissolved solids and loads of most of the ions did not show any significant differences after deforestation, which indicates a slight impact of logging on the chemical denudation. This resulted from the limited soil erosion that followed deforestation as the soil was well protected during logging works by covering harvester lanes with branches. However, there is a significant impact of road salting on the solute fluxes in the headwater catchment. Assuming that the control catchment is not affected by using de-icing salts, the road salting inputs in the Wüstebach catchment calculated based on the precipitation share for Na+, Ca2+, Mg2+, K+, and Cl− ions were, on average, 88%, 53%, 18%, 53%, and 90%, respectively, of the original ion loads. The input with road salting was so large that elevated concentrations of Na+ and Cl− were noted throughout the study period with slight seasonal fluctuations. This proves the subsurface build-up of salt due to the long-term application of de-icing salt. Without the input of de-icing salts, the average annual rate of chemical denudation in the catchment would be about 19 t/km2/a. Thus, on average, this ion storage effect in the soil has increased the total dissolved solids rate by 62%. In summary, it can be concluded that long-term intensive road salting in winter has a greater impact on the solute fluxes than the clear-cut of 22% of the catchment area. [ABSTRACT FROM AUTHOR]

The effects of land use change on the occurrence and frequency of preferential flow (fast water flow through a small fraction of the pore space) and piston flow (slower water flow through a large fraction of the pore space) are still not fully understood. In this study, we used a five year high resolution soil moisture monitoring dataset in combination with a response time analysis to identify factors that control preferential and piston flow before and after partial deforestation in a small headwater catchment. The sensor response times at 5, 20 and 50 cm depths were classified into one of four classes: (1) non-sequential preferential flow, (2) velocity based preferential flow, (3) sequential (piston) flow, and (4) no response. The results of this analysis showed that partial deforestation increased sequential flow occurrence and decreased the occurrence of no flow in the deforested area. Similar precipitation conditions (total precipitation) after deforestation caused more sequential flow in the deforested area, which was attributed to higher antecedent moisture conditions and the lack of interception. At the same time, an increase in preferential flow occurrence was also observed for events with identical total precipitation. However, as the events in the treatment period (after deforestation) generally had lower total, maximum, and mean precipitation, this effect was not observed in the overall occurrence of preferential flow. The results of this analysis demonstrate that the combination of a sensor response time analysis and a soil moisture dataset that includes pre- and post-deforestation conditions can offer new insights in preferential and sequential flow conditions after land use change. [ABSTRACT FROM AUTHOR]