Search

A corrosion study is performed on six variations of titanium grade 5 (Ti6Al4V) samples. Samples are prepared in different conditions by variation of preanodization, postanodization, and picosecond‐laser (ps‐laser) surface treatment, while polished and anodized samples serve as reference. Microcones and nanosized periodic surface features are successfully produced on Ti6Al4V samples. The morphology and topography of the structures are visualized by scanning electron microscopy and white light interference microscopy. Furthermore, the relative electrochemically active surface area (ECSA) is determined for the ps‐laser‐treated samples. It is determined that the preanodized and laser‐treated sample has 3.5 times larger ECSA than a polished sample, and that the laser‐treated sample has 4.1 times larger area. Moreover, Tafel analysis is performed to determine the corrosion properties of the samples. It is shown that the corrosion resistance improves for both laser‐structured samples after the anodization. To further study the surface of the samples, electrochemical impedance spectroscopy measurements are conducted. The study indicates that the ps‐laser‐treated and anodized Ti6Al4V is suitable to be used for the fabrication of bone screws and plates due to its improved corrosion resistance as compared to nonanodized samples. [ABSTRACT FROM AUTHOR]

This document is a compilation of articles that discuss the field of laser materials processing and its applications in various industries. It emphasizes Europe's role in this field and provides an overview of a symposium held during the 2023 Spring Meeting of the European Materials Research Society. The articles cover topics such as laser nanostructuring, up-scaling processing rates, laser direct writing, laser texturing, and surface engineering. The authors provide detailed experimental observations and analysis of their findings, and their biographies highlight their expertise in laser processing. [Extracted from the article]

Titanium and its alloys are known to allow the straightforward laser‐based manufacturing of ordered surface nanostructures, so‐called high spatial frequency laser‐induced periodic surface structures (HSFL). These structures exhibit sub‐100 nm spatial periods – far below the optical diffraction limit. The resulting surface functionalities are usually enabled by both, topographic and chemical alterations of the nanostructured surfaces. For exploring these effects, multi‐method characterizations were performed here for HSFL processed on Ti–6Al–4V alloy upon irradiation with near‐infrared ps‐laser pulses (1030 nm, ≈1 ps pulse duration, 1–400 kHz) under different laser scan processing conditions, i.e., by systematically varying the pulse repetition frequency and the number of laser irradiation passes. The sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), tactile stylus profilometry, as well as near‐surface chemical analyses hard X‐ray photoelectron spectroscopy (HAXPES) and depth‐profiling time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). This provides a quantification of the laser ablation depth, the geometrical HSFL characteristics and enables new insights into the depth extent and the nature of the non‐ablative laser‐induced near‐surface oxidation accompanying these nanostructures. This allows to answer the questions how the processing of HSFL can be industrially scaled up, and whether the latter is limited by heat‐accumulation effects. [ABSTRACT FROM AUTHOR]

An erratum has been published regarding a previous article on the structure formation on the surface of indium phosphide irradiated by femtosecond laser pulses. The erratum identifies typographical errors in three equations related to calculating the efficacy factor. The corrected equations are provided, and it is noted that the computer algebra code used in the original article was not affected by these errors. The erratum also includes implementations of the corrected equations in Mathematica and Python, as well as acknowledgments and data availability information. [Extracted from the article]

Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over a large range of length scales from mm down to the nano‐range. One of the most prominent examples are LIPSS – Laser‐Induced Periodic Surface Structures. While LIPSS have been a scientific evergreen for of almost 60 years, experimental methods that combine ultrafast temporal with the required nm spatial resolution have become available only recently with the advent of short pulse, short wavelength free electron lasers. Here, the current status and future perspectives in this field are discussed by exploiting the unique possibilities of these 4th‐generation light sources to address by time‐domain experimental techniques the fundamental LIPSS‐question, namely why and how laser irradiation can initiate the transition of a "chaotic" (rough) surface from an aperiodic into a periodic structure. [ABSTRACT FROM AUTHOR]

Laser‐induced periodic surface structures (LIPSS) represent a unique route for functionalizing materials through the fabrication of surface nanostructures. Commercial AISI 316L stainless steel (SS316L) surfaces are laser treated by ultraviolet 300 ps laser pulses in a laser line scanning (LLS) approach. Processing parameters are optimized (pulse energy of 2.08 µJ, pulse repetition frequency of 300 kHz, and suitable laser scan and sample displacement rates) for the generation of low spatial frequency LIPSS over a large 25 × 25 mm2 area. Different angles of incidence of the laser radiation (0°, 30°, and 45°) and different linear laser beam polarizations (s and p) produce a plethora of rippled surface morphologies at distinct grains. Scanning electron microscopy and 2D Fourier transforms, together with calculations of the optical energy deposited at the treated surfaces using Sipe's first‐principles electromagnetic scattering theory, are used to study and analyze in detail these surface morphologies. Combined with electron backscattering diffraction, analyses allow associating site‐selectively various laser‐induced‐surface morphologies with the underlying crystalline grain orientation. Resulting grain orientation maps reveal a strong impact of the grain crystallographic orientation on LIPSS formation and point toward possible strategies, like multi‐step processes, for improving the manufacturing of LIPSS and their areal coverage of polycrystalline technical materials. [ABSTRACT FROM AUTHOR]

Bacterial biofilms pose serious problems in medical and industrial settings. One of the major societal challenges lies in the increasing resistance of bacteria against biocides used in antimicrobial treatments, e.g., via overabundant use in medicine, industry, and agriculture or cleaning and disinfection in private households. Hence, new efficient bacteria‐repellent strategies avoiding the use of biocides are strongly desired. One promising route to achieve bacteria‐repellent surfaces lies in the contactless and aseptic large‐area laser‐processing of technical surfaces. Tailored surface textures, enabled by different laser‐processing strategies that result in topographic scales ranging from nanometers to micrometers may provide a solution to this challenge. This article presents a current state‐of‐the‐art review of laser‐surface subtractive texturing approaches for controlling the biofilm formation for different bacterial strains and in different environments. Based on specific properties of bacteria and laser‐processed surfaces, the challenges of anti‐microbial surface designs are discussed, and future directions will be outlined. [ABSTRACT FROM AUTHOR]