Search

In this work, the change of the elastic properties induced by a change in cross-linking conditions of polydimethylsiloxane is investigated by measuring its shear modulus by dynamic mechanical analysis and correlating it to that predicted from swelling measurements. Polymer cross-linking is performed at different curing temperatures reached with ramps at different heating rates. From both mechanical and swelling measurements, the molecular weight between cross-links, MC, is determined, and its dependency on the applied thermal history is analyzed. The main results are: (i) the elastic modulus of the cured material is not significantly affected by the heating rate adopted, while (ii) the curing temperature has a significant influence on the polydimethylsiloxane mechanical properties. In addition, (iii) MC evaluation from swelling measurements is in good agreement with that estimated from mechanical measurements when appropriate theories are considered. This last result suggests that swelling experiments can be considered as a reliable tool to predict the elastic modulus of the polydimethylsiloxane studied. The quantitative information reported in this paper, also obtainable by the suggested method if other thermal curing histories are applied, is extremely useful for the proper design of devices based on polydimethylsiloxanes.

Bijels are a peculiar type of Pickering emulsion that have a bicontinuous morphology and are stabilised by a jammed layer of nanoparticles (NPs). Due to their double nature, their usage has increased in recent years in various fields, such as biological and food applications. In fact, they can release both hydrophilic and hydrophobic compounds simultaneously. An improvement to this structure is the use of a hydrophobic monomer like polycaprolactone as the organic phase, which is able to polymerise during the formation of the structure. Unfortunately, the structures formed in this way always have some drawbacks, such as their thermal stability or degradation when submerged in an aqueous medium. A number of studies have been carried out in which some parameters, such as the NPs or the monomer, were changed and their effect on the final product evaluated. In this work, the effect of modifying the aqueous phase was studied. In particular, the effect of adding alginate, a biopolymer capable of forming a stable hydrogel in the presence of divalent cations, was analysed, as was the difference between soaking or not in CaCl2, the final system. Specific attention was paid to their swelling behaviour (150% vs. 25% of the blank sample), rheological properties (G′ 100 kPa vs. 20 kPa of the blank sample) and their release performances. In this framework, complete release of hydrophilic drug vs. 20% in the blank sample was observed together with improved release of the hydrophobic one with 35% in 8 h vs. 5% in the case of the blank sample. This strategy has been proven to influence bijels’ properties, opening the doors to many different uses

Introduction: In the view of 3D-bioprinting with cell models representative of neural cells, we produced inks to mimic the basic viscoelastic properties of brain tissue. Moving from the concept that rheology provides useful information to predict ink printability, this study improves and expands the potential of the previously published 3D-reactive printing approach by introducing pH as a key parameter to be controlled, together with printing time.Methods: The viscoelastic properties, printability, and microstructure of pectin gels crosslinked with CaCO3 were investigated and their composition was optimized (i.e., by including cell culture medium, HEPES buffer, and collagen). Different cell models representative of the major brain cell populations (i.e., neurons, astrocytes, microglial cells, and oligodendrocytes) were considered.Results and Discussion: The outcomes of this study propose a highly controllable method to optimize the printability of internally crosslinked polysaccharides, without the need for additives or post-printing treatments. By introducing pH as a further parameter to be controlled, it is possible to have multiple (pH-dependent) crosslinking kinetics, without varying hydrogel composition. In addition, the results indicate that not only cells survive and proliferate following 3D-bioprinting, but they can also interact and reorganize hydrogel microstructure. Taken together, the results suggest that pectin-based hydrogels could be successfully applied for neural cell culture.

Abstract In polyjet printing photopolymer droplets are deposited on a build tray, leveled off by a roller and cured by UV light. This technique is attractive to fabricate heterogeneous architectures combining compliant and stiff constituents. Considering the layer-by-layer nature, interfaces between different photopolymers can be formed either before or after UV curing. We analyzed the properties of interfaces in 3D printed composites combining experiments with computer simulations. To investigate photopolymer blending, we characterized the mechanical properties of the so-called digital materials, obtained by mixing compliant and stiff voxels according to different volume fractions. We then used nanoindentation to measure the spatial variation in mechanical properties across bimaterial interfaces at the micrometer level. Finally, to characterize the impact of finite-size interfaces, we fabricated and tested composites having compliant and stiff layers alternating along different directions. We found that interfaces formed by deposition after curing were sharp whereas those formed before curing showed blending of the two materials over a length scale bigger than individual droplet size. We found structural and functional differences of the layered composites depending on the printing orientation and corresponding interface characteristics, which influenced deformation mechanisms. With the wide dissemination of 3D printing techniques, our results should be considered in the development of architectured materials with tailored interfaces between building blocks.

Retentive drug delivery systems (DDSs) are intended for prolonged residence and release inside hollow muscular organs, to achieve either local or systemic therapeutic goals. Recently, formulations based on shape memory polymers (SMPs) have gained attention in view of their special ability to recover a shape with greater spatial encumbrance at the target organ (e.g., urinary bladder or stomach), triggered by contact with biological fluids at body temperature. In this work, poly(vinyl alcohol) (PVA), a pharmaceutical-grade SMP previously shown to be an interesting 4D printing candidate, was employed to fabricate expandable organ-retentive prototypes by hot melt extrusion. With the aim of improving the mechanical resistance of the expandable DDS and slowing down relevant drug release, the application of insoluble permeable coatings based on either Eudragit® RS/RL or Eudragit® NE was evaluated using simple I-shaped specimens. The impact of the composition and thickness of the coating on the shape memory, swelling, and release behavior as well as on the mechanical properties of these specimens was thoroughly investigated and the effectiveness of the proposed strategy was demonstrated by the results obtained.

The effect of temperature on the damage mechanisms occurring in a toughened acrylic resin was investigated by studying volume changes during tensile tests, analyzing the reversibility of the damage after applying proper thermal histories and by direct transmission electron microscope observations. It was found that an increase of temperature, from 0[degrees]C to 60[degrees]C, shifts the predominant mechanism from crazing to cavitation and shear yielding. When the latter occur, the material response is very susceptible to previous thermal treatments; and in particular to the cooling rate from above glass transition temperature. Crazing on the other hand is not influenced by the thermal history of the material., INTRODUCTION Acrylic resins are widely appreciated for their properties such as stiffness, transparency, and good weather resistance but they tend to yield by crazing showing a brittle fracture and this [...]

The time dependence of fracture toughness of two different acrylic resins, one plain and one toughened, intended to be used as continuous fiber composite matrices was studied. By performing fracture tests following the fracture mechanics approach, the energy release rate, [G.sub.Ic], was determined at different temperatures and displacement rates and by applying the time-temperature superposition it was possible to obtain [G.sub.Ic] as a function of crack speed, a, over a wide range of speeds. The trends obtained for the two resins were different. For the plain resin it could be well described by J. G. Williams' viscoelastic fracture theory while for the toughened resin, the trend obtained was attributed to a change in the damage mechanism occurring at the crack tip during fracture. From measurements of the process zone size it was deduced that the damage mechanism at the crack tip for the plain resin was the same irrespective of time and temperature, for the toughened resin instead, different mechanisms seem to take place. This hypothesis was supported by results of volume strain measurements in tensile tests at different temperature and strain rates., INTRODUCTION Acrylic glassy polymers have been widely used in many different applications. These polymers are stiff, transparent and have very good weathering properties but generally yield by crazing and show [...]

Cancer is one of the most life-threatening diseases worldwide. Despite the huge efforts, the failure rate of therapies remains high due to cells heterogeneity, so physiologically relevant models are strictly necessary. Bioprinting is a technology able to form highly complex 3D tissue models and enables the creation of large-scale constructs. In cancer research, Matrigel® is the most widely used matrix, but it is hardly bioprinted pure, without the use of any other bioink as reinforcement. Its complex rheological behavior makes the control with a standard bioprinting process nearly impossible. In this work, we present a customized bioprinting strategy to produce pure Matrigel® scaffolds with good shape fidelity. To this aim, we realized a custom-made volumetric dispensing system and performed printability evaluations. To determine optimal printing parameters, we analyzed fibers spreading ratio on simple serpentines. After identifying an optimal flow rate of 86.68 ± 5.77 µL/min and a printing speed of 10 mm/min, we moved forward to evaluate printing accuracy, structural integrity and other key parameters on single and multi-layer grids. Results demonstrated that Matrigel® was able to maintain its structure in both simple and complex designs, as well as in single and multilayer structures, even if it does not possess high mechanical strength. In conclusion, the use of volumetric dispensing allowed printing pure Matrigel® constructs with a certain degree of shape fidelity on both single and multiple layers.

The pulsatile-release Chronotopic™ system was conceived of as a drug-containing core surrounded by a coat made of swellable/soluble hydrophilic polymers, the latter being able to provide a programmable lag phase prior to drug liberation. This system was also proposed in a colon-targeting configuration, entailing a gastroresistant film to prevent early interaction of the inner coat with gastric fluids and enabling the attainment of a lag phase matching the small intestinal transit time. Over the years, various multiple-step manufacturing processes have been tested for the fabrication of the Chronotopic™ system in both its configurations. This work focused on the evaluation of 3D printing by fused deposition modeling in view of its potential towards product personalization, on demand one-step manufacturing and efficient scale down of batches. The feasibility of each part of the Chronotopic™ system was independently investigated starting from in-house made filaments, characterizing the resulting specimens for physico-technological and performance characteristics. The printing parameters identified as suitable during the set-up phase were then used to fabricate prototypes either in a single step for the pulsatile configuration or following two different fabrication approaches for the colon-targeting one.