Search

Passivating contacts are becoming a mainstream option in current photovoltaic industry due to their ability to provide an outstanding surface passivation along with a good conductivity for carrier collection. However, their integration usually requires long annealing steps which are not desirable in industry. In this work we study PECVD as a way to carry out all deposition steps: silicon oxide (SiOx), doped polycrystalline silicon (poly-Si) and silicon nitride (SiNx:H), followed by a single firing step. Blistering of the poly-Si layer has been avoided by depositing (p+) microcrystalline silicon (μc-Si:H). We report on the impact of this deposition step on the SiOx layer deposited by PECVD, and on the passivation properties by comparing PECVD and wet-chemical oxide in this hole-selective passivating contact stack. We have reached iVoc > 690 mV on p-type FZ wafers for wet-chemical SiOx\(p+) μc-Si\SiNx:H with no annealing step. [ABSTRACT FROM AUTHOR]

Non-destructive characterization of both single layers and completed devices are important issues for the development of efficient and low cost Cu(In,Ga)(S,Se) 2 (CIGS) modules at high yields. This implies for the need of methodologies suitable for the assessment of optical, electrical, and physico-chemical parameters that are relevant for the final device efficiency and that can be used for quality control and process monitoring at different process steps. In these applications, detection of in-homogeneities in the different layers from large area modules is especially relevant, being the presence of these inhomogeneities responsible for the existing gap between the efficiencies achieved in these technologies at cell and module levels. In this context, this work reviews the different optical methodologies that have been developed in the framework of the SCALENANO European project for the advanced assessment of the different layers in high efficiency electrodeposited – based CIGS devices. This has includes different strategies as those based on Raman scattering, Photoluminescence/Electroluminescence (PL/EL) based techniques and new photoelectrochemical based tools and firstly Raman spectroscopy is very sensitive to both composition and crystal quality parameters that are determining for device efficiency. Use of resonant Raman excitation strategies allows achieving a high sensitivity of the Raman spectra to the analysed features in the different regions of the device. This involves selection of the suitable excitation wavelength (in the broad spectral region from UV to IR) for the resonant Raman excitation of the required layer in the device. The strong increase in the intensity of the Raman peaks related to the use of resonant excitation conditions allows also decreasing the measuring time to times compatible with the implementation of these techniques at online process monitoring level. Analysed parameters include the electrical conductivity of the Al-doped ZnO window layer, the thickness of the CdS buffer layer and the chemical composition (S/(S+Se) relative content) and presence of relevant secondary phases as Cu-poor ordered vacancy compounds in the surface region of the absorbers. In addition PL/EL imaging are powerful techniques that provide direct access to the optoelectronic properties of the materials and devices. Whereas EL is performed using complete devices by injecting current in analogy to the operation of a light emitting diode, PL allows the characterization of bare absorber materials without the need for any functional or contacting layers. Moreover, semiconductor photo-electrochemistry (PEC) is a versatile technique that enables many opto-electronic properties of semiconductors to be determined. Essentially, a semiconductor on a conducting substrate placed in a solution containing redox species forms a Schottky barrier junction. The formation of such a diode enables basic semiconductor properties to be measured such as doping type, doping density, band gap and the flat band position versus the vacuum energy scale. In all these cases, quality control indicators suitable for the advanced assessment of these processes have been identified and validated for the electrodeposition-based processes developed at Nexcis Company. [ABSTRACT FROM AUTHOR]

Solution processing of inorganic thin films has become an important thrust in material research community because it offers low-cost and high-throughput deposition of various functional coatings and devices. Especially inorganic thin film solar cells - macroelectronic devices that rely on consecutive deposition of layers on large-area rigid and flexible substrates - could benefit from solution approaches in order to realize their low-cost nature. This article critically reviews existing deposition approaches of functional layers for chalcogenide solar cells with an extension to other thin film technologies. Only true solutions of readily available metal salts in appropriate solvents are considered without the need of pre-fabricated nanoparticles. By combining three promising approaches, an air-stable Cu(In,Ga)Se2 thin film solar cell with efficiency of 13.8% is demonstrated where all constituent layers (except the metal back contact) are processed from solutions. Notably, water is employed as the solvent in all steps, highlighting the potential for safe manufacturing with high utilization rates. [ABSTRACT FROM AUTHOR]

This paper presents the low cost electrodeposition of a transparent and conductive chlorine doped ZnO layer with performances comparable to that produced by standard vacuum processes. First, an in-depth study of the defect physics by ab-initio calculation shows that chlorine is one of the best candidates to dope the ZnO. This result is experimentally confirmed by a complete optical analysis of the ZnO layer deposited in a chloride rich solution. We demonstrate that high doping levels (>1020 cm−3) and mobilities (up to 20 cm2 V−1 s−1) can be reached by insertion of chlorine in the lattice. The process developed in this study has been applied on a CdS/Cu(In,Ga)(Se,S)2 p-n junction produced in a pilot line by a non vacuum process, to be tested as solar cell front contact deposition method. As a result efficiency of 14.3% has been reached opening the way of atmospheric production of Cu(In,Ga)(Se,S)2 solar cell. [ABSTRACT FROM AUTHOR]